RESUMEN
Uncontrolled bleeding after trauma represents a substantial clinical problem. The current standard of care to treat bleeding after trauma is transfusion of blood products including platelets; however, donated platelets have a short shelf life, are in limited supply, and carry immunogenicity and contamination risks. Consequently, there is a critical need to develop hemostatic platelet alternatives. To this end, we developed synthetic platelet-like particles (PLPs), formulated by functionalizing highly deformable microgel particles composed of ultralow cross-linked poly (N-isopropylacrylamide) with fibrin-binding ligands. The fibrin-binding ligand was designed to target to wound sites, and the cross-linking of fibrin polymers was designed to enhance clot formation. The ultralow cross-linking of the microgels allows the particles to undergo large shape changes that mimic platelet shape change after activation; when coupled to fibrin-binding ligands, this shape change facilitates clot retraction, which in turn can enhance clot stability and contribute to healing. Given these features, we hypothesized that synthetic PLPs could enhance clotting in trauma models and promote healing after clotting. We first assessed PLP activity in vitro and found that PLPs selectively bound fibrin and enhanced clot formation. In murine and porcine models of traumatic injury, PLPs reduced bleeding and facilitated healing of injured tissue in both prophylactic and immediate treatment settings. We determined through biodistribution experiments that PLPs were renally cleared, possibly enabled by ultrasoft particle properties. The performance of synthetic PLPs in the preclinical studies shown here supports future translational investigation of these hemostatic therapeutics in a trauma setting.
Asunto(s)
Hemostáticos , Roedores , Animales , Ratones , Porcinos , Roedores/metabolismo , Distribución Tisular , Plaquetas/metabolismo , Hemorragia , Fibrina/química , Fibrina/metabolismoRESUMEN
Near infra-red (NIR) fluorescence is a desirable property for probe particles because such deeply penetrating light enables remote reporting of the local environment in complex surroundings and imaging. Here, two NIR non-radiative energy transfer (NRET) fluorophores (Cy5 and Cy5.5) are coupled to preformed pH-responsive poly(ethylacrylate-methacrylic acid-divinylbenzene) microgel particles (PEA-MAA-5/5.5 MGs) to obtain new NIR fluorescent probes that are cytocompatible and swell strongly. NIR ratiometric photoluminescence (PL) intensity analysis enables reporting of pH-triggered PEA-MAA-5/5.5 MG particle swelling ratios over a very wide range (from 1-90). The dispersions have greatly improved colloidal stability compared to a reference temperature-responsive NIR MG based on poly(N-isopropylacrylamide) (PNP-5/5.5). We also show that the wavelength of maximum PL intensity (λ max) is a second PL parameter that enables remote reporting of swelling for both PEA-MAA-5/5.5 and PNP-5/5.5 MGs. After internalization the PEA-MAA-5/5.5 MGs are successfully imaged in stem cells using NIR light. They are also imaged after subcutaneous injection into model tissue using NIR light. The new NIR PEA-MAA-5/5.5 MGs have excellent potential for reporting their swelling states (and any changes) within physiological settings as well as very high ionic strength environments (e.g., waste water).
RESUMEN
Remotely reporting the local environment within hydrogels using inexpensive laboratory techniques has excellent potential to improve our understanding of the nanometer-scale changes that cause macroscopic swelling or deswelling. Whilst photoluminescence (PL) spectroscopy is a popular method for such studies this approach commonly requires bespoke and time-consuming synthesis to attach fluorophores which may leave toxic residues. A promising and more versatile alternative is to use a pre-formed nanogel probe that contains a donor/acceptor pair and then "dope" that into the gel during gel assembly. Here, we introduce green-emitting methacrylic acid-based nanogel probe particles and use them to report the local environment within four different gels as well as stem cells. As the swelling of the nanogel probe changes within the gels the non-radiative energy transfer efficiency is strongly altered. This efficiency change is sensitively reported using the PL ratiometric intensity from the donor and acceptor. We demonstrate that our new nanoprobes can reversibly report gel swelling changes due to five different environmental stimuli. The latter are divalent cations, gel degradation, pH changes, temperature changes and tensile strain. In the latter case, the nanoprobe rendered a nanocomposite gel mechanochromic. The results not only provide new structural insights for hierarchical natural and synthetic gels, but also demonstrate that our new green-fluorescing nanoprobes provide a viable alternative to custom fluorophore labelling for reporting the internal gel environment and its changes.
RESUMEN
Nanogels and microgels are soft, deformable, and penetrable objects with an internal gel-like structure that is swollen by the dispersing solvent. Their softness and the potential to respond to external stimuli like temperature, pressure, pH, ionic strength, and different analytes make them interesting as soft model systems in fundamental research as well as for a broad range of applications, in particular in the field of biological applications. Recent tremendous developments in their synthesis open access to systems with complex architectures and compositions allowing for tailoring microgels with specific properties. At the same time state-of-the-art theoretical and simulation approaches offer deeper understanding of the behavior and structure of nano- and microgels under external influences and confinement at interfaces or at high volume fractions. Developments in the experimental analysis of nano- and microgels have become particularly important for structural investigations covering a broad range of length scales relevant to the internal structure, the overall size and shape, and interparticle interactions in concentrated samples. Here we provide an overview of the state-of-the-art, recent developments as well as emerging trends in the field of nano- and microgels. The following aspects build the focus of our discussion: tailoring (multi)functionality through synthesis; the role in biological and biomedical applications; the structure and properties as a model system, e.g., for densely packed arrangements in bulk and at interfaces; as well as the theory and computer simulation.
RESUMEN
Poly(N-isopropylacrylamide) microgels prepared without exogenous crosslinker are extremely "soft" as a result of their very low crosslinking density, with network connectivity arising only from the self-crosslinking of pNIPAm chains. As a result of this extreme softness, our group and others have taken interest in using these materials in a variety of bioengineering applications, while also pursuing studies of their fundamental properties. Here, we report deswelling triggered structural changes in poly (N-isopropylacrylamide-co-acrylic acid) (ULC10AAc) microgels prepared by precipitation polymerization. Dynamic light scattering suggests that the deswelling of these particles not only depends on the collapse of the pNIPAm chains but is also influenced by the ionization state of the acrylic acid moieties present in the copolymer. The ULC10AAc microgel behaves like a traditional crosslinked pNIPAm microgel at pH 3.5, showing a sharp decrease in the hydrodynamic diameter around the lower critical solution temperature (LCST) of pNIPAm. As the pH is increased to 4.5 we observe multiple transitions in the deswelling curve, suggesting inhomogeneity in the structure and/or composition of the microgels. At pH 6.5 the microgels cease to be thermoresponsive over the studied temperature range due to increased charge repulsion between the fully deprotonated AAc groups and an increase in gel osmotic pressure due to solvated counterion ingress. Atomic force microscopy images of particles deposited at different temperatures reveal a temperature induced morphological change, with punctate structures forming inside microgels at pH 4.5 and 6.5 and temperature above the gel volume phase transition temperature (VPTT).
RESUMEN
Excessive bleeding and resulting complications are a major cause of death in both trauma and surgical settings. Recently, there have been a number of investigations into the design of synthetic hemostatic agents with platelet-mimicking activity to effectively treat patients suffering from severe hemorrhage. We developed platelet-like particles from microgels composed of polymers carrying polyethylene glycol (PEG) side-chains and fibrin-targeting single domain variable fragment antibodies (PEG-PLPs). Comparable to natural platelets, PEG-PLPs were found to enhance the fibrin network formation in vitro through strong adhesion to the emerging fibrin clot and physical, non-covalent cross-linking of nascent fibrin fibers. Furthermore, the mechanical reinforcement of the fibrin mesh through the incorporation of particles into the network leads to a â¼three-fold decrease of the overall clot permeability as compared to control clots. However, transport of biomolecules through the fibrin clots, such as peptides and larger proteins is not hindered by the presence of PEG-PLPs and the altered microstructure. Compared to control clots with an elastic modulus of 460+/-260â¯Pa, PEG-PLP-reinforced fibrin clots exhibit higher degrees of stiffness as demonstrated by the significantly increased average Younǵs modulus of 1770â¯+/±720â¯Pa, as measured by AFM force spectroscopy. Furthermore, in vitro degradation studies with plasmin demonstrate that fibrin clots formed in presence of PEG-PLPs withstand hydrolysis for 24â¯h, indicating enhanced stabilization against exogenous fibrinolysis. The entire set of data suggests that the designed platelet-like particles have high potential for use as hemostatic agents in emergency medicine and surgical settings.
Asunto(s)
Fibrina/química , Polietilenglicoles/química , Polímeros/química , Módulo de ElasticidadRESUMEN
We present a systematic study of self-cross-linked microgels formed by precipitation polymerization of oligo ethylene glycol methacrylates. The cross-linking density of these microgels and, thus, the network flexibility can be easily tuned through the modulation of the reaction temperature during polymerization. Microgels prepared in absence of any difunctional monomer, i.e. cross-linker, show enhanced deformability and particle spreading on solid surfaces as compared to microgels cross-linked with varying amounts of poly(ethylene glycol diacrylate) (PEG-DA) in addition to self-crosslinking. Particles prepared at low reaction temperatures exhibit the highest degree of spreading due to the lightly cross-linked and flexible polymer network. Moreover, AFM force spectroscopy studies suggest that cross-linker-free microgels constitute of a more homogeneous polymer network than PEG-DA cross-linked particles and have elastic moduli at the particle apex that are ~5 times smaller than the moduli of 5 mol-% PEG-DA cross-linked microgels. Resistive pulse sensing experiments demonstrate that microgels prepared at 75 and 80°C without PEG-DA are able to deform significantly to pass through nanopores that are smaller than the microgel size. Additionally, we found that polymer network flexibility of microgels is a useful tool to control the formation of particle dewetting patterns. This offers a promising new avenue for build-up of 2D self-assembled particle structures with patterned chemical and mechanical properties.
Asunto(s)
Fenómenos Mecánicos , Polietilenglicoles/química , Polimerizacion , Módulo de Elasticidad , Geles , Hidrólisis , Nanoporos , Propiedades de SuperficieRESUMEN
We report a cell-mediated, targeted drug delivery system utilizing polyelectrolyte multilayer capsules that hybridize with the patient's own platelets upon intravenous administration. The hybridized platelets function as the sensor and actuator for targeted drug delivery and controlled release in our system. These capsules are biochemically and mechanically tuned to enable platelet adhesion and capsule rupture upon platelet activation and contraction, enabling the targeted and controlled "burst" release of an encapsulated biotherapeutic. As platelets are the "first responders" in the blood clot formation process, this platelet-hybridized system is ideal for the targeted delivery of clot-augmenting biotherapeutics wherein immediate therapeutic efficacy is required. As proof-of-concept, we tailored this system to deliver the pro-clotting biotherapeutic factor VIII for hemophilia A patients that have developed inhibitory antifactor VIII antibodies. The polyelectrolyte multilayer capsules physically shield the encapsulated factor VIII from the patient's inhibitors during circulation, preserving its bioactivity until it is delivered at the target site via platelet contractile force. Using an in vitro microfluidic vascular injury model with factor VIII-inhibited blood, we demonstrate a 3.8× increase in induced fibrin formation using capsules loaded with factor VIII at a concentration an order of magnitude lower than that used in systemic delivery. We further demonstrate that clot formation occurs 18 min faster when factor VIII loaded capsules are used compared to systemic delivery at the same concentration. Because platelets are integral in the pathophysiology of thrombotic disorders, cancer, and innate immunity, this paradigm-shifting smart drug delivery system can be similarly applied to these diseases.
Asunto(s)
Plaquetas/metabolismo , Preparaciones de Acción Retardada/metabolismo , Sistemas de Liberación de Medicamentos , Factor VIII/administración & dosificación , Hemostáticos/administración & dosificación , Coagulación Sanguínea/efectos de los fármacos , Plaquetas/citología , Cápsulas , Factor VIII/farmacología , Fibrina/metabolismo , Hemostáticos/farmacología , Humanos , Activación Plaquetaria/efectos de los fármacosRESUMEN
In regenerative medicine, natural protein-based polymers offer enhanced endogenous bioactivity and potential for seamless integration with tissue, yet form weak hydrogels that lack the physical robustness required for surgical manipulation, making them difficult to apply in practice. The use of higher concentrations of protein, exogenous cross-linkers, and blending synthetic polymers has all been applied to form more mechanically robust networks. Each relies on generating a smaller network mesh size, which increases the elastic modulus and robustness, but critically inhibits cell spreading and migration, hampering tissue regeneration. Here we report two unique observations; first, that colloidal suspensions, at sufficiently high volume fraction (Ï), dynamically assemble into a fully percolated 3D network within high-concentration protein polymers. Second, cells appear capable of leveraging these unique domains for highly efficient cell migration throughout the composite construct. In contrast to porogens, the particles in our system remain embedded within the bulk polymer, creating a network of particle-filled tunnels. Whereas this would normally physically restrict cell motility, when the particulate network is created using ultralow cross-linked microgels, the colloidal suspension displays viscous behavior on the same timescale as cell spreading and migration and thus enables efficient cell infiltration of the construct through the colloidal-filled tunnels.
Asunto(s)
Movimiento Celular , Coloides/química , Animales , Materiales Biocompatibles/química , Fibrina/química , Hidrogeles/química , Ratones , Células 3T3 NIH , Polímeros/química , Medicina Regenerativa , Trombina/químicaRESUMEN
In this study a new pH-responsive nanogel probe containing a complementary nonradiative resonance energy transfer (NRET) fluorophore pair is investigated and its ability to act as a versatile probe of network-related changes in three hydrogels demonstrated. Fluorescent sensing using NRET is a powerful method for studying relationships between Angstrom length-scale structure and macroscopic properties of soft matter. Unfortunately, inclusion of NRET fluorophores into such materials requires material-specific chemistry. Here, low concentrations of preformed nanogel probes were included into hydrogel hosts. Ratiometric photoluminescence (PL) data for the gels labeled with the nanogel probes enabled pH-triggered swelling and deswelling to be studied as well as Ca2+-triggered collapse and solute release. PL measurements during compression of a nanogel probe-labeled nanocomposite gel demonstrated mechanochromic behavior and strain sensing. The new nanogel probes have excellent potential for investigating the internal structures of gels and provide a versatile ratiometric fluorescent platform for studying pH and strain.
RESUMEN
Impurities in crystals generally cause point defects and can even suppress crystallization. This general rule, however, does not apply to colloidal crystals formed by soft microgel particles [Iyer ASJ, Lyon LA (2009) Angew Chem Int Ed 48:4562-4566], as, in this case, the larger particles are able to shrink and join the crystal formed by a majority of smaller particles. Using small-angle X-ray scattering, we find the limit in large-particle concentration for this spontaneous deswelling to persist. We rationalize our data in the context of those counterions that are bound to the microgel particles as a result of the electrostatic attraction exerted by the fixed charges residing on the particle periphery. These bound counterions do not contribute to the suspension osmotic pressure in dilute conditions, as they can be seen as internal degrees of freedom associated with each microgel particle. In contrast, at sufficiently high particle concentrations, the counterion cloud of each particle overlaps with that of its neighbors, allowing these ions to freely explore the space outside the particles. We confirm this scenario by directly measuring the osmotic pressure of the suspension. Because these counterions are then no longer bound, they create an osmotic pressure difference between the inside and outside of the microgels, which, if larger than the microgel bulk modulus, can cause deswelling, explaining why large, soft microgel particles feel the squeeze when suspended with a majority of smaller particles. We perform small-angle neutron scattering measurements to further confirm this remarkable behavior.
RESUMEN
To enhance the immunogenicity of the Influenza H5N1 vaccine, we developed an oil-in-water nanoemulsion (NE) adjuvant. NE displayed good temperature stability and maintained particle size. More importantly, it significantly enhanced IL-6 and MCP-1 production to recruit innate cells, including neutrophils, monocytes/macrophages and dendritic cells to the local environment. Furthermore, NE enhanced dendritic cell function to induce robust antigen-specific T and B cell immune responses. NE-adjuvanted H5N1 vaccine not only elicited significantly higher and long-lasting antibody responses, but also conferred enhanced protection against homologous clade 1 as well as heterologous clade 2 H5N1 virus challenge in young as well as in aged mice. The pre-existing immunity to seasonal influenza did not affect the immunogenicity of NE-adjuvanted H5N1 vaccine.
Asunto(s)
Subtipo H5N1 del Virus de la Influenza A , Vacunas contra la Influenza/administración & dosificación , Nanopartículas/química , Adyuvantes Inmunológicos , Animales , Anticuerpos Antivirales , Emulsiones , Humanos , Gripe Humana/prevención & control , RatonesRESUMEN
We investigate poly(N-isopropylacrylamide) (pNIPAM) microgels randomly copolymerized with large mol % of protonated acrylic acid (AAc), finding that above the lower critical solution temperature the presence of the acid strongly disrupts pNIPAM's collapse, leading to unexpected new behavior at high temperatures. Specifically, we see a dramatic increase in the ratio between the radius of gyration and the hydrodynamic radius above the theoretical value for homogeneous spheres, and a corresponding increase of the network length scale, which we attribute to the presence of a heterogeneous polymer distribution that forms due to frustration of pNIPAM's coil-to-globule transition by the AAc. We analyze this phenomenon using a Debye-Bueche-like scattering contribution as opposed to the Lorentzian term often used, interpreting the results in terms of mass segregation at the particle periphery.
Asunto(s)
Resinas Acrílicas/química , Geles/química , Temperatura , Acrilatos/química , Hidrodinámica , Modelos Químicos , Protones , SolucionesRESUMEN
We investigate the influence of microgel composition on phase behavior of binary microgel dispersions using poly(N-isopropylacrylamide) microgels cross-linked with 5 mol% and 1 mol% N,N'-methylenebis(acrylamide), or poly(N-isopropylmethacrylamide) microgels cross-linked with 5 mol% N,N'-methylenebis(acrylamide). We then explore the dispersion phase behavior in the context of microgel deposition at a planar interface. These results are then compared to the observed assembly of microgels at curved interfaces, in the form of raspberry-like patchy particles (RLPPs) consisting of a polystyrene core surrounded by a (two-component) microgel shell. Results suggest that microgel composition has a large influence on the ability of binary dispersions to coat planar and curved interfaces. In particular, we demonstrate that binary dispersions of microgels containing higher cross-linker content exhibit decreased packing densities that are very pronounced at a curved interface. To enhance packing density we also explore the use of a two-step coating process to fabricate RLPPs with enhanced control over topography. Development of these complex vehicles is potentially beneficial in the modulation of biological systems where spatial and temporal presentation of molecules can have a large influence on cellular behavior.
Asunto(s)
Acrilamidas/química , Resinas Acrílicas/química , Reactivos de Enlaces Cruzados/química , Sistemas de Liberación de Medicamentos , Geles , Tamaño de la Partícula , Transición de Fase , Poliestirenos/química , Propiedades de Superficie , TemperaturaRESUMEN
The mechanism of action of the widely used in vivo ferric chloride (FeCl3) thrombosis model remains poorly understood; although endothelial cell denudation is historically cited, a recent study refutes this and implicates a role for erythrocytes. Given the complexity of the in vivo environment, an in vitro reductionist approach is required to systematically isolate and analyze the biochemical, mass transfer, and biological phenomena that govern the system. To this end, we designed an "endothelial-ized" microfluidic device to introduce controlled FeCl3 concentrations to the molecular and cellular components of blood and vasculature. FeCl3 induces aggregation of all plasma proteins and blood cells, independent of endothelial cells, by colloidal chemistry principles: initial aggregation is due to binding of negatively charged blood components to positively charged iron, independent of biological receptor/ligand interactions. Full occlusion of the microchannel proceeds by conventional pathways, and can be attenuated by antithrombotic agents and loss-of-function proteins (as in IL4-R/Iba mice). As elevated FeCl3 concentrations overcome protective effects, the overlap between charge-based aggregation and clotting is a function of mass transfer. Our physiologically relevant in vitro system allows us to discern the multifaceted mechanism of FeCl3-induced thrombosis, thereby reconciling literature findings and cautioning researchers in using the FeCl3 model.
Asunto(s)
Plaquetas/efectos de los fármacos , Cloruros/farmacología , Eritrocitos/efectos de los fármacos , Compuestos Férricos/farmacología , Agregado de Proteínas/efectos de los fármacos , Aspirina/farmacología , Fenómenos Biomecánicos , Plaquetas/química , Plaquetas/citología , Agregación Celular/efectos de los fármacos , Cloruros/antagonistas & inhibidores , Cloruros/química , Eritrocitos/química , Eritrocitos/citología , Compuestos Férricos/antagonistas & inhibidores , Compuestos Férricos/química , Fibrinolíticos/farmacología , Heparina/farmacología , Humanos , Técnicas Analíticas Microfluídicas , Modelos Biológicos , Plasma Rico en Plaquetas/química , Cultivo Primario de Células , Unión Proteica , Electricidad Estática , Trombosis/metabolismo , Trombosis/patologíaRESUMEN
Microgels are colloidally stable, hydrogel microparticles that have previously been used in a range of (soft) material applications due to their tunable mechanical and chemical properties. Most commonly, thermo and pH-responsive poly(N-isopropylacrylamide) (pNIPAm) microgels can be fabricated by precipitation polymerization in the presence of the co-monomer acrylic acid (AAc). Traditionally pNIPAm microgels are synthesized in the presence of a crosslinking agent, such as N,N'-methylenebisacrylamide (BIS), however, microgels can also be synthesized under 'crosslinker free' conditions. The resulting particles have extremely low (<0.5%), core-localized crosslinking resulting from rare chain transfer reactions. AFM nanoindentation of these ultralow crosslinked (ULC) particles indicate that they are soft relative to crosslinked microgels, with a Young's modulus of â¼10 kPa. Furthermore, ULC microgels are highly deformable as indicated by a high degree of spreading on glass surfaces and the ability to translocate through nanopores significantly smaller than the hydrodynamic diameter of the particles. The size and charge of ULCs can be easily modulated by altering reaction conditions, such as temperature, monomer, surfactant and initiator concentrations, and through the addition of co-monomers. Microgels based on the widely utilized, biocompatible polymer polyethylene glycol (PEG) can also be synthesized under crosslinker free conditions. Due to their softness and deformability, ULC microgels are a unique base material for a wide variety of biomedical applications including biomaterials for drug delivery and regenerative medicine.
Asunto(s)
Resinas Acrílicas/química , Hidrogeles/química , Acrilamidas , Acrilatos/química , Sulfato de Amonio/química , Reactivos de Enlaces Cruzados/química , Isocianatos/química , Polietilenglicoles/química , Reología , Silanos/química , Dodecil Sulfato de Sodio/químicaRESUMEN
Thin films composed entirely of microgel building blocks were fabricated using two kinds of self-cross-linked, oppositely charged microgels, via centrifugal deposition. Atomic force microscopy studies revealed that both microgels form very thin monolayer films due to a large degree of microgel deformation during deposition. Meanwhile, centrifugal deposition from a mixture of these two kinds of microgels resulted in the formation of microgel bilayers with a total thickness of around 20 nm. The film thickness increased linearly with the deposition time. Additionally, isotropic stretching/release by heating/cooling of the dried microgel films generated complicated buckling patterns, while anisotropic (uniaxial) stretching/release resulted in parallel buckling perpendicular to the stretching direction. The damage caused by anisotropic stretching and 100 °C treatment can be healed by addition of water, while damage caused via treatment at 150 °C cannot be healed due to the occurrence of polymer cross-linking, which inhibits the mobility of the microgel building blocks.
RESUMEN
We describe the influence of microgel packing on colloidal-phase mediated heteroaggregation using poly(N-isopropylacrylamide) and poly(N-isopropylmethacrylamide) microgels with 1% mol or 5% mol N,N'-methylenebis(acrylamide) cross-linker. This system is uniquely designed to interrogate the influence of microgel structure and stiffness on microgel deformation at a curved interface by elminating the necessity of electrostatic charge pairing. Microgel monomer and cross-linker content is expected to influence deformation at a curved interface. Microgel deformation and swelling were characterized via atomic force microscopy (AFM) and viscometry. A systematic study of colloidal-phase mediated heteroaggregation was performed at varied effective volume fractions with all microgel compositions. Scanning electron microscopy (SEM) and qNano pore translocation experiments were used to asses the microgel coverage on the resultant raspberry-like particles (RLPs). Results reveal that microgel composition has a strong influence on the efficiency (as determined by microgel coverage) of RLP fabrication. The compositional effects appear to be related to the degree of microgel spreading/deformation at the interface, which is coupled to the influence of packing on assembly fidelity. These findings are widely applicable to systems where microgel deformation occurs at a curved interface. We also demonstrate that qNano pore translocation experiments can be used as a high-throughput method to analyze RLP microgel coverage.
Asunto(s)
Resinas Acrílicas/química , Coloides/química , Geles/química , Metacrilatos/química , Reactivos de Enlaces Cruzados/química , Propiedades de Superficie , TemperaturaRESUMEN
Efforts to create platelet-like structures for the augmentation of haemostasis have focused solely on recapitulating aspects of platelet adhesion; more complex platelet behaviours such as clot contraction are assumed to be inaccessible to synthetic systems. Here, we report the creation of fully synthetic platelet-like particles (PLPs) that augment clotting in vitro under physiological flow conditions and achieve wound-triggered haemostasis and decreased bleeding times in vivo in a traumatic injury model. PLPs were synthesized by combining highly deformable microgel particles with molecular-recognition motifs identified through directed evolution. In vitro and in silico analyses demonstrate that PLPs actively collapse fibrin networks, an emergent behaviour that mimics in vivo clot contraction. Mechanistically, clot collapse is intimately linked to the unique deformability and affinity of PLPs for fibrin fibres, as evidenced by dissipative particle dynamics simulations. Our findings should inform the future design of a broader class of dynamic, biosynthetic composite materials.
Asunto(s)
Materiales Biocompatibles/química , Coagulación Sanguínea/fisiología , Plaquetas/fisiología , Fibrina/química , Geles/química , Técnicas Hemostáticas , Modelos Biológicos , Plaquetas/citología , Endotelio Vascular/citología , Fibrina/metabolismo , Microscopía Confocal , Dominios y Motivos de Interacción de Proteínas , Propiedades de SuperficieRESUMEN
BACKGROUND: Anemia, or low blood hemoglobin (Hgb) levels, afflicts 2 billion people worldwide. Currently, Hgb levels are typically measured from blood samples using hematology analyzers, which are housed in hospitals, clinics, or commercial laboratories and require skilled technicians to operate. A reliable, inexpensive point-of-care (POC) Hgb test would enable cost-effective anemia screening and chronically anemic patients to self-monitor their disease. We present a rapid, stand-alone, and disposable POC anemia test that, via a single drop of blood, outputs color-based visual results that correlate with Hgb levels. METHODS: We tested blood from 238 pediatric and adult patients with anemia of varying degrees and etiologies and compared hematology analyzer Hgb levels with POC Hgb levels, which were estimated via visual interpretation using a color scale and an optional smartphone app for automated analysis. RESULTS: POC Hgb levels correlated with hematology analyzer Hgb levels (r = 0.864 and r = 0.856 for visual interpretation and smartphone app, respectively), and both POC test methods yielded comparable sensitivity and specificity for detecting any anemia (n = 178) (<11 g/dl) (sensitivity: 90.2% and 91.1%, specificity: 83.7% and 79.2%, respectively) and severe anemia (n = 10) (<7 g/dl) (sensitivity: 90.0% and 100%, specificity: 94.6% and 93.9%, respectively). CONCLUSIONS: These results demonstrate the feasibility of this POC color-based diagnostic test for self-screening/self-monitoring of anemia. TRIAL REGISTRATION: Not applicable. FUNDING: This work was funded by the FDA-funded Atlantic Pediatric Device Consortium, the Georgia Research Alliance, Children's Healthcare of Atlanta, the Georgia Center of Innovation for Manufacturing, and the InVenture Prize and Ideas to Serve competitions at the Georgia Institute of Technology.