Photoelectrochemical Lithium Extraction from Waste Batteries.

The amount of global hybrid-electric and all electric vehicle has increased dramatically in just five years and reached an all-time high of over 10 million units in 2022. A good deal of waste lithium (Li)-containing batteries from dead vehicles are invaluable unconventional resources with high usage of Li. However, the recycle of Li by green approaches is extremely inefficient and rare from waste batteries, giving rise to severe environmental pollutions and huge squandering of resources. Thus, in this mini review, we briefly summarized a green and promising route-photoelectrochemical (PEC) technology for extracting the Li from the waste lithium-containing batteries. This review first focuses on the critical factors of PEC performance, including light harvesting, charge-carrier dynamics, and surface chemical reactions. Subsequently, the conventional and PEC technologies applying in the area of Li recovery processes are analyzed and discussed in depth, and the potential challenges and future perspective for rational and healthy development of PEC Li extraction are provided positively.

Challenge-Hindrance Stressors and Academic Engagement Among Medical Postgraduates in China: A Moderated Mediation Model.

Background: Improving academic engagement of medical postgraduates is crucial for enhancing the quality of learning and the development of medical education. Due to medical postgraduates face high levels of stress and rigorous demands, yet the mechanisms linking challenge-hindrance stressors to academic engagement in this context remain largely unexplored. This study aims to explore the comprehensive relationship between challenge-hindrance stressors and academic engagement among medical postgraduates in China. Methods: Data were collected from 437 medical postgraduates in China, to investigate their challenge-hindrance stressors, emotional exhaustion, learning, relaxation and academic engagement. Among these postgraduates, 40.3% were male and 59.7% were female, with the mean age of the participants being 25.71 years. Statistical procedures were conducted using Mplus 8.3, ensuring a robust analysis of the data collected. Results: Our study showed that both challenge and hindrance stressors are significantly positively correlated with emotional exhaustion among Chinese medical postgraduates, and emotional exhaustion is negatively associated with academic engagement. Emotional exhaustion mediates the relationship between challenge-hindrance stressors and academic engagement. Learning plays a protective role, moderating the challenge stressors and emotional exhaustion relationship and its indirect effect on academic engagement. However, relaxation was not identified as a significant moderating factor in this context. Conclusion: Our findings not only revealed emotional exhaustion as a potential mechanism underlying the relationship between challenge-hindrance stressors and academic engagement but also validated the moderating role of learning in mitigating the adverse effects of challenge stressors on emotional exhaustion and academic engagement among Chinese medical postgraduates. This comprehensive insight into the complex dynamics between different stressors and academic engagement provides both theoretical and empirical evidence for medical universities. It underscores the importance of interventions to enhance academic engagement in stressful environments and serves as a valuable reference for the development of reasonable assessment systems. These contributions are crucial for fostering a supportive educational atmosphere and promoting the well-being of medical postgraduates.

Enhanced charge-carrier dynamics and efficient solar-to-urea conversion on Si-based photocathodes.

Photoelectrochemical (PEC) coupling of CO2 and nitrate can provide a useful and green source of urea, but the process is affected by the photocathodes with poor charge-carrier dynamics and low conversion efficiency. Here, a NiFe diatomic catalysts/TiO2 layer/nanostructured n+p-Si photocathode is rationally designed, achieving a good charge-separation efficiency of 78.8% and charge-injection efficiency of 56.9% in the process of PEC urea synthesis. Compared with the electrocatalytic urea synthesis by using the same catalysts, the Si-based photocathode shows a similar urea yield rate (81.1 mg·h-1·cm-2) with a higher faradic efficiency (24.2%, almost twice than the electrocatalysis) at a lower applied potential under 1 sun illumination, meaning that a lower energy-consumption method acquires more aimed productions. Integrating the PEC measurements and characterization results, the synergistic effect of hierarchical structure is the dominating factor for enhancing the charge-carrier separation, transfer, and injection by the matched band structure and favorable electron-migration channels. This work provides a direct and efficient route of solar-to-urea conversion.

Mixed-phase WO3 Cocatalysts on Hierarchical Si-based Photocathode for Efficient Photoelectrochemical Li Extraction.

Photoelectrochemical lithium (Li) extraction can be expected to provide a useful recycle of Li+ from waste Li-containing battery, but the process is limited by the photocathodes with poor Li+ absorption and low yield rate. Here, we have designed a hierarchical silicon (Si)-based photocathode with mixed-phase tungsten oxide (WO3 ) cocatalysts for photoelectrochemical Li extraction under 1 sun illumination, achieving a high Li yield rate of ≈223.0 µg cm-2 h-1 and an excellent faradaic efficiency of 91.9 % at 0.0817 V versus Li0/+ redox couple. The WO3 cocatalysts with the mixture of amorphous and crystalline phase accelerates the Li+ insertion and precipitation and enriches the concentration of Li+ at the photocathode surface. This robust photoelectrochemical Li extraction system provides a new insight on designing green and efficient route for cyclic utilization of Li resources in the sustainable energy field.

Compression Stress-Induced Internal Magnetic Field in Bulky TiO2 Photoanodes for Enhancing Charge-Carrier Dynamics.

Enhancing charge-carrier dynamics is imperative to achieve efficient photoelectrodes for practical photoelectrochemical devices. However, a convincing explanation and answer for the important question which has thus far been absent relates to the precise mechanism of charge-carrier generation by solar light in photoelectrodes. Herein, to exclude the interference of complex multi-components and nanostructuring, we fabricate bulky TiO2 photoanodes through physical vapor deposition. Integrating photoelectrochemical measurements and in situ characterizations, the photoinduced holes and electrons are transiently stored and promptly transported around the oxygen-bridge bonds and 5-coordinated Ti atoms to form polarons on the boundaries of TiO2 grains, respectively. Most importantly, we also find that compressive stress-induced internal magnetic field can drastically enhance the charge-carrier dynamics for the TiO2 photoanode, including directional separation and transport of charge carriers and an increase of surface polarons. As a result, bulky TiO2 photoanode with high compressive stress displays a high charge-separation efficiency and an excellent charge-injection efficiency, leading to 2 orders of magnitude higher photocurrent than that produced by a classic TiO2 photoanode. This work not only provides a fundamental understanding of the charge-carrier dynamics of the photoelectrodes but also provides a new paradigm for designing efficient photoelectrodes and controlling the dynamics of charge carriers.

Photoelectrochemical N2 -to-NH3 Fixation with High Efficiency and Rates via Optimized Si-Based System at Positive Potential versus Li0/.

As a widely used commodity chemical, ammonia is critical for producing nitrogen-containing fertilizers and serving as the promising zero-carbon energy carrier. Photoelectrochemical nitrogen reduction reaction (PEC NRR) can provide a solar-powered green and sustainable route for synthesis of ammonia (NH3 ). Herein, an optimum PEC system is reported with an Si-based hierarchically-structured PdCu/TiO2 /Si photocathode and well-thought-out trifluoroethanol as the proton source for lithium-mediated PEC NRR, achieving a record high NH3 yield of 43.09 µg cm-2 h-1 and an excellent faradaic efficiency of 46.15% under 0.12 MPa O2 and 3.88 MPa N2 at 0.07 V versus lithium(0/+) redox couple (vs Li0/+ ). PEC measurements coupled with operando characterization reveal that the PdCu/TiO2 /Si photocathode under N2 pressures facilitate the reduction of N2 to form lithium nitride (Li3 N), which reacts with active protons to produce NH3 while releasing the Li+ to reinitiate the cycle of the PEC NRR. The Li-mediated PEC NRR process is further enhanced by introducing small amount of O2 or CO2 under pressure by accelerating the decomposition of Li3 N. For the first time, this work provides mechanistic understanding of the lithium-mediated PEC NRR process and opens new avenues for efficient solar-powered green conversion of N2 -to-NH3 .

Low level of antioxidant capacity biomarkers but not target overexpression predicts vulnerability to ROS-inducing drugs.

Despite a strong rationale for why cancer cells are susceptible to redox-targeting drugs, such drugs often face tumor resistance or dose-limiting toxicity in preclinical and clinical studies. An important reason is the lack of specific biomarkers to better select susceptible cancer entities and stratify patients. Using a large panel of lung cancer cell lines, we identified a set of "antioxidant-capacity" biomarkers (ACB), which were tightly repressed, partly by STAT3 and STAT5A/B in sensitive cells, rendering them susceptible to multiple redox-targeting and ferroptosis-inducing drugs. Contrary to expectation, constitutively low ACB expression was not associated with an increased steady state level of reactive oxygen species (ROS) but a high level of nitric oxide, which is required to sustain high replication rates. Using ACBs, we identified cancer entities with a high percentage of patients with favorable ACB expression pattern, making it likely that more responders to ROS-inducing drugs could be stratified for clinical trials.

MediMer: a versatile do-it-yourself peptide-receptive MHC class I multimer platform for tumor neoantigen-specific T cell detection.

Peptide-loaded MHC class I (pMHC-I) multimers have revolutionized our capabilities to monitor disease-associated T cell responses with high sensitivity and specificity. To improve the discovery of T cell receptors (TCR) targeting neoantigens of individual tumor patients with recombinant MHC molecules, we developed a peptide-loadable MHC class I platform termed MediMer. MediMers are based on soluble disulfide-stabilized ß2-microglobulin/heavy chain ectodomain single-chain dimers (dsSCD) that can be easily produced in large quantities in eukaryotic cells and tailored to individual patients' HLA allotypes with only little hands-on time. Upon transient expression in CHO-S cells together with ER-targeted BirA biotin ligase, biotinylated dsSCD are purified from the cell supernatant and are ready to use. We show that CHO-produced dsSCD are free of endogenous peptide ligands. Empty dsSCD from more than 30 different HLA-A,B,C allotypes, that were produced and validated so far, can be loaded with synthetic peptides matching the known binding criteria of the respective allotypes, and stored at low temperature without loss of binding activity. We demonstrate the usability of peptide-loaded dsSCD multimers for the detection of human antigen-specific T cells with comparable sensitivities as multimers generated with peptide-tethered ß2m-HLA heavy chain single-chain trimers (SCT) and wild-type peptide-MHC-I complexes prior formed in small-scale refolding reactions. Using allotype-specific, fluorophore-labeled competitor peptides, we present a novel dsSCD-based peptide binding assay capable of interrogating large libraries of in silico predicted neoepitope peptides by flow cytometry in a high-throughput and rapid format. We discovered rare T cell populations with specificity for tumor neoepitopes and epitopes from shared tumor-associated antigens in peripheral blood of a melanoma patient including a so far unreported HLA-C*08:02-restricted NY-ESO-1-specific CD8+ T cell population. Two representative TCR of this T cell population, which could be of potential value for a broader spectrum of patients, were identified by dsSCD-guided single-cell sequencing and were validated by cognate pMHC-I multimer staining and functional responses to autologous peptide-pulsed antigen presenting cells. By deploying the technically accessible dsSCD MHC-I MediMer platform, we hope to significantly improve success rates for the discovery of personalized neoepitope-specific TCR in the future by being able to also cover rare HLA allotypes.

Advanced Zn-I2 Battery with Excellent Cycling Stability and Good Rate Performance by a Multifunctional Iodine Host.

The rechargeable zinc-iodine (Zn-I2) battery is a promising energy-storage system due to its low cost and good security, but the practical use of the battery is largely constrained by the shuttle effect and high dissolvability of iodides. Here a multifunctional iodine host, constructed with nitrogen-doped porous carbon nanocages (NCCs) by the polymerization carbonization activation method, is exploited to improve the electrochemical performance and lifespan of the Zn-I2 battery, achieving a high specific capacity of 259 mAh g-1, a good rate performance (maintaining 50.6% expanding 50 times), and a high cycle stability (retention of 100% after 1000 cycles). On the basis of the experimental results and theoretical calculations, NCCs via the introduction of N doping and nanosized porous structure can simultaneously provide rich and robust anchoring and catalytic sites to carry out the electrostatic adsorption of iodides and facilitate the reversible conversion between iodine and iodides. This work shows a novel and efficient strategy to develop high-performance and long-life Zn-I2 batteries.

Optimization of Ferroelectric Ordering and Thermal Stability in Na1/2Bi1/2TiO3-Based Lead-Free Single Crystal through Defect Engineering.

Environmentally friendly lead-free piezoelectric materials have been attracting significant attention in recent years. Na1/2Bi1/2TiO3-based relaxor ferroelectrics have found acceptance for application in promising lead-free transducers in high-power ultrasonic devices. However, their low thermal stability, i.e., their relatively low ferroelectric-relaxor transition temperature (TF-R), hinders their practical application. Herein, a thermal-quenching approach is applied on a Na1/2Bi1/2TiO3 (NBT)-based single crystal, which yields a large increase in TF-R and dramatic enhancement of its ferroelectric ordering, leading to excellent thermal stability of its dielectric, ferroelectric, and piezoelectric properties. This behavior is mainly attributed to quenching-induced domain evolution as well as its octahedral tilt, which is linked to the increased oxygen vacancies. The substitution of long-range ordered ferroelectric domains for short-range polar nanodomains contributes to its increased coherence length and, consequently, enhancement of TF-R. This work provides an approach to the optimization of the ferroelectric ordering and thermal stability of NBT as well as an in-depth understanding of the quenching effect on the local structure, which could be applied to other relaxor-based ferroelectrics for optimization of their macroscopic properties.

RIP2 knockdown inhibits cartilage degradation and oxidative stress in IL-1ß-treated chondrocytes via regulating TRAF3 and inhibiting p38 MAPK pathway.

Receptor-interacting protein 2 (RIP2) is a key mediator implicated in multiple cellular processes, and its dysregulation has been recently reported in colitis, asthma and other inflammatory diseases. However, the effects of RIP2 on osteoarthritis (OA) and the underlying mechanisms remain unclear. In this study, we found that RIP2 expression was upregulated in human articular cartilage tissues with OA and interleukin-1ß (IL-1ß)-treated chondrocytes. Knockdown of RIP2 inhibited IL-1ß-induced extracellular matrix (ECM) and oxidative stress. Moreover, knockdown of TRAF3 reversed the effects of RIP2 silencing on cartilage degradation and oxidative stress in IL-1ß-induced chondrocytes. In addition, p38 mitogen-activated protein kinase (MAPK) activator dehydrocorydalmine chloride (Dc) also reversed the effects of RIP2 silencing on IL-1ß-induced chondrocytes. Taken together, our data reveal that RIP2 knockdown inhibits cartilage degradation and oxidative stress in IL-1ß-treated chondrocytes by regulating TRAF3 expression and p38 MAPK pathway activation.

circ2GO: A Database Linking Circular RNAs to Gene Function.

Circular RNAs (circRNAs) play critical roles in a broad spectrum of physiological and pathological processes, including cancer. Here, we provide a comprehensive database-circ2GO-systematically linking circRNAs to the functions and processes of their linear counterparts. circ2GO contains 148,811 circular human RNAs originating from 12,251 genes, which we derived from deep transcriptomics after rRNA depletion in a panel of 60 lung cancer and non-transformed cell lines. The broad circRNA expression dataset is mapped to all isoforms of the respective gene. The data are visualized in transcript maps and in heatmaps, to intuitively display a comprehensive portrait for the abundance of circRNAs across transcripts and cell lines. By integrating gene ontology (GO) information for all genes in our dataset, circ2GO builds a connection between circRNAs and their host genes' biological functions and molecular mechanisms. Additionally, circ2GO offers target predictions for circRNA-microRNA (miRNA) pairs for 25,166 highly abundant circRNAs from 6578 genes and 897 high-confidence human miRNAs. Visualization, user-friendliness, intuitive and advanced forward and reverse search options, batch processing and download options make circ2GO a comprehensive source for circRNA information to build hypotheses on their function, processes, and miRNA targets.

[Increased expression of transendothelial migration-related molecules CCL4, ICAM-1 and VCAM-1 in lung tissue after surgical removal of mouse tumor-bearing lymph node].

Objective To detect the expression of chemokine and adhesion molecules related to leukocytes' transendothelial migration, meanwhile, to investigate changes of reticular fibers and the expression of vimentin and matrix metalloproteinase-9 (MMP9) in lung tissues after surgical removal of mouse tumor-bearing lymph node, revealing their changes and roles in the formation of pre-metastatic microenvironment in the lung. Methods B16F10 melanoma cells were inoculated into mouse subiliac lymph node (SiLN). Twenty mice were equally divided into groups with or without (as a control group) tumor-bearing SiLN removal. Fifteen days later, tumor-bearing lymph node was surgically removed; 3 days after resection, mouse lung tissues were collected. The change of reticular fibers in lung tissues was observed by silver impregnation staining. The expression of C-C motif chemokine ligand 4 (CCL4), intercellular adhesion molecule-1 (ICAM-1), vascular cell adhesion molecule-1 (VCAM-1), vimentin and MMP9 in lung tissues was detected by Western blotting. Results Compared with control group, expression of MMP9 and vimentin increased significantly in the lung tissues of SiLN removal group; reticular fibers were obviously fractured and its per area was reduced. Moreover, expression of CCL4, ICAM-1 and VCAM-1 also significantly increased. Conclusion Expression of CCL4, ICAM-1, VCAM-1, MMP9 and vimentin in mouse lung tissues is promoted after surgical removal of tumor-bearing lymph node, contributing to inflammatory cells' adhesion to and extravasation across vascular endothelium and further resulting in the formation of inflammatory microenvironment.

The Circular RNA Landscape of Non-Small Cell Lung Cancer Cells.

The class of circular RNA (circRNA) is characterized by head-to-tail bonds between exons formed by backsplicing. Here, we provide a resource of circRNA expression in a comprehensive panel of 60 lung cancer and non-transformed cell lines (FL3C dataset). RNA sequencing after depletion of ribosomal RNA quantified the expression of circRNA and linear RNA. We detected 148,811 circular RNAs quantified by 2.8 million backsplicing reads originating from 12,251 genes. The number of identified circRNAs was markedly higher using rRNA depletion compared to public polyA-enriched RNA-seq datasets. CircRNAs almost never started in the first exon nor ended in the last exon and started more frequently in earlier exons. Most circRNAs showed high cell line specificity and correlated positively with their linear RNA counterpart. Known cancer genes produced more circRNAs than non-cancer genes. Subsets of circRNAs correlated with cell proliferation, histological subtype or genotype. CircTNFRSF21 was translated crossing the backsplice site in two different reading frames. Overexpression of circPVT1, circERBB2, circHIPK3, circCCNB1, circSMAD2, circTNFRSF21 and circKIF5B significantly increased colony formation. In conclusion, our data provide a comprehensive map of circRNA expression in lung cancer cells and global patterns of circRNA production as a useful resource for future research into lung cancer circRNAs.

Identifying the Intrinsic Relationship between the Restructured Oxide Layer and Oxygen Evolution Reaction Performance on the Cobalt Pnictide Catalyst.

Cobalt pnictides show good catalytic activity and stability on oxygen evolution reaction (OER) behaviors in a strong alkaline solution. Identifying the intrinsic composition/structure-property relationship of the oxide layer on the cobalt pnictides is critical to design better and cheaper electrocatalysts for the commercial viability of OER technologies. In this work, the restructured oxide layer on the cobalt pnictides and its effect on the activity and mechanism for OER is systematically analyzed. In-situ electrochemical impedance spectroscopy (EIS) and near edge x-ray absorption fine structure (NEXAFS) spectra indicate that a higher OER performance of cobalt pnictides than Co3 O4 is attributed to the more structural disorder and oxygen defect sites in the cobalt oxide layer evolved from cobalt pnictides. Using angle resolved x-ray photoelectron spectroscopy (AR-XPS) further demonstrates that the oxygen defect sites mainly concentrate on the subsurface of cobalt oxide layer. The current study demonstrated promising opportunities for further enhancing the OER performance of cobalt-based electrocatalysts by controlling the subsurface defects of the restructured active layer.

Tuning the Electron Localization of Gold Enables the Control of Nitrogen-to-Ammonia Fixation.

The (photo)electrochemical N2 reduction reaction (NRR) provides a favorable avenue for the production of NH3 using renewable energy in mild operating conditions. Understanding and building an efficient catalyst with high NH3 selectivity represents an area of intense interest for the early stages of development for NRR. Herein, we introduce a CoOx layer to tune the local electronic structure of Au nanoparticles with positive valence sites for boosting conversion of N2 to NH3 . The catalysts, possessing high average oxidation states (ca. 40 %), achieve a high NH3 yield rate of 15.1 µg cm-2 h-1 and a good faradic efficiency of 19 % at -0.5 V versus reversible hydrogen electrode. Experimental results and simulations reveal that the ability to tune the oxidation state of Au enables the control of N2 adsorption and the concomitant energy barrier of NRR. Altering the Au oxidation state provides a unique strategy for control of NRR in the production of valuable NH3 .

Crystalline TiO2 protective layer with graded oxygen defects for efficient and stable silicon-based photocathode.

The trade-offs between photoelectrode efficiency and stability significantly hinder the practical application of silicon-based photoelectrochemical devices. Here, we report a facile approach to decouple the trade-offs of silicon-based photocathodes by employing crystalline TiO2 with graded oxygen defects as protection layer. The crystalline protection layer provides high-density structure and enhances stability, and at the same time oxygen defects allow the carrier transport with low resistance as required for high efficiency. The silicon-based photocathode with black TiO2 shows a limiting current density of ~35.3 mA cm-2 and durability of over 100 h at 10 mA cm-2 in 1.0 M NaOH electrolyte, while none of photoelectrochemical behavior is observed in crystalline TiO2 protection layer. These findings have significant suggestions for further development of silicon-based, III-V compounds and other photoelectrodes and offer the possibility for achieving highly efficient and durable photoelectrochemical devices.

Defect-Enhanced Charge Separation and Transfer within Protection Layer/Semiconductor Structure of Photoanodes.

Silicon (Si) requires a protection layer to maintain stable and long-time photoanodic reaction. However, poor charge separation and transfer are key constraint factors in protection layer/Si photoanodes that reduce their water-splitting efficiency. Here, a simultaneous enhancement of charge separation and transfer in Nb-doped NiOx /Ni/black-Si photoanodes induced by plasma treatment is reported. The optimized photoanodes yield the highest charge-separation efficiency (ηsep ) of ≈81% at 1.23 V versus reversible hydrogen electrode, corresponding to the photocurrent density of ≈29.1 mA cm-2 . On the basis of detailed characterizations, the concentration and species of oxygen defects in the NiOx -based layer are adjusted by synergistic effect of Nb doping and plasma treatment, which are the dominating factors for forming suitable band structure and providing a favorable hole-migration channel. This work elucidates the important role of oxygen defects on charge separation and transfer in the protection layer/Si-based photoelectrochemical systems and is encouraging for application of this synergistic strategy to other candidate photoanodes.