RESUMEN
At GSI, the CAPRICE ECRIS is used to provide heavy ion beams to the UNILAC (Universal Linear Accelerator) accelerator. In order to satisfy the demand of metal ion beams, a resistively heated oven is routinely used. This evaporation technique allows the ion beam production from natural and enriched solid elements or compounds with high efficiency and low material consumption. Often it is required to provide high charge state ion beams from rare or extremely rare isotopes as 48Ca, e.g., for the investigation of super heavy elements. In order to maintain the ion beam stable for the entire scheduled beam time, the plasma inside the ion source must remain as stable as possible. The tuning of ion source parameters and oven power affecting the oven temperature and, in turn, the evaporation rate is necessary. A strong relationship between the microwave power and the oven heating was observed, thus affecting the power control, the plasma stability, and the material consumption. Hence, it was investigated how an optical spectrometer can be used as a predictive diagnostic tool to detect ion source instabilities. Furthermore, the effect of parasitic oven heating by coupling of microwaves was investigated. Optical emission spectroscopy was performed by analyzing the light from the plasma and from the oven through the extraction aperture. The measurements enabled us to distinguish between resistive heating and microwave heating. The results of this investigation are presented.
RESUMEN
BACKGROUND: Uncertainty remains on the pathogenetic mechanisms, model of inheritance as well as genotype-phenotype correlation of FMF disease. OBJECTIVE: To investigate the impact of genetic factors on the FMF phenotype and the disease inheritance model. METHODS: A total of 107 FMF patients were enrolled. Patients were diagnosed clinically. All patients underwent genetic analysis of the FMF locus on 16p13.3. RESULTS: 9 distinct mutations were detected. Specifically, the 85.98% of patients showed a heterozygous genotype. The most common genotypes were p.Met680Ile/wt and p.Met694Val/wt. The most frequent clinical findings were fever, abdominal pain, joint pain, thoracic pain, and erysipelas-like erythema. Analysis of clinical data did not detect any significant difference in clinical phenotype among heterozygous, homozygous as well as compound homozygous subjects, further supporting the evidence that, contrary to the recessive autosomal inheritance, heterozygous patients fulfilled the criteria of clinical FMF. Moreover, subjects with p.Met694Val/wt and p.Met680Ile/wt genotype reported the most severe clinical phenotype. p.Ala744Ser/wt, p.Glu148Gln/Met680Ile, p.Met680Ile/Met680Ile, p.Met680Ile/Met694Val, p.Pro369Ser/wt, p.Met694Ile/wt, p.Glu148Gln/Glu148Gln, p.Lys695Arg/wt resulted in 100% pathogenicity. CONCLUSIONS: The existence of a "non classic" autosomal recessive inheritance as well as of an "atypical" dominant autosomal inheritance with incomplete penetrance and variable expressivity cannot be excluded in FMF.
Asunto(s)
Fiebre Mediterránea Familiar/genética , Genes Recesivos/genética , Femenino , Estudios de Asociación Genética/métodos , Sitios Genéticos/genética , Genotipo , Heterocigoto , Homocigoto , Humanos , Masculino , Mutación/genética , Linaje , FenotipoRESUMEN
In order to increase the intensity of the highly charged ions produced by the Electron Cyclotron Resonance Ion Sources (ECRISs), techniques like the frequency tuning and the afterglow mode have been developed and in this paper the effect on the ion production is shown for the first time when combining both techniques. Recent experimental results proved that the tuning of the operating frequency of the ECRIS is a promising technique to achieve higher ion currents of higher charge states. On the other hand, it is well known that the afterglow mode of the ECRIS operation can provide more intense pulsed ion beams in comparison with the continuous wave (cw) operation. These two techniques can be combined by pulsing the variable frequency signal driving the traveling wave tube amplifier which provides the high microwave power to the ECRIS. In order to analyze the effect of these two combined techniques on the ion source performance, several experiments were carried out on the pulsed frequency tuned CAPRICE (Compacte source A Plusiers Résonances Ionisantes Cyclotron Electroniques)-type ECRIS. Different waveforms and pulse lengths have been investigated under different settings of the ion source. The results of the pulsed mode have been compared with those of cw operation.
RESUMEN
Simulation of ion beam extraction from an Electron Cyclotron Resonance Ion Source (ECRIS) is a fully 3 dimensional problem, even if the extraction geometry has cylindrical symmetry. Because of the strong magnetic flux density, not only the electrons are magnetized but also the Larmor radius of ions is much smaller than the geometrical dimension of the plasma chamber (Ø 64 × 179 mm). If we assume that the influence of collisions is small on the path of particles, we can do particle tracking through the plasma if the initial coordinates of particles are known. We generated starting coordinates of plasma ions by simulation of the plasma electrons, accelerated stochastically by the 14.5 GHz radio frequency power fed to the plasma. With that we were able to investigate the influence of different electron energies on the extracted beam. Using these assumptions, we can reproduce the experimental results obtained 10 years ago, where we monitored the beam profile with the help of viewing targets. Additionally, methods have been developed to investigate arbitrary 2D cuts of the 6D phase space. To this date, we are able to discuss full 4D information. Currently, we extend our analysis tool towards 5D and 6D, respectively.
RESUMEN
An experimental campaign aiming to detect X radiation emitted by the plasma of the CAPRICE source - operating at GSI, Darmstadt - has been carried out. Two different detectors (a SDD - Silicon Drift Detector and a HpGe - hyper-pure Germanium detector) have been used to characterize the warm (2-30 keV) and hot (30-500 keV) electrons in the plasma, collecting the emission intensity and the energy spectra for different pumping wave frequencies and then correlating them with the CSD of the extracted beam measured by means of a bending magnet. A plasma emissivity model has been used to extract the plasma density along the cone of sight of the SDD and HpGe detectors, which have been placed beyond specific collimators developed on purpose. Results show that the tuning of the pumping frequency considerably modifies the plasma density especially in the warm electron population domain, which is the component responsible for ionization processes: a strong variation of the plasma density near axis region has been detected. Potential correlations with the charge state distribution in the plasma are explored.
RESUMEN
The properties of the electromagnetic waves heating the electrons of the ECR ion sources (ECRIS) plasma affect the features of the extracted ion beams such as the emittance, the shape, and the current, in particular for higher charge states. The electron heating methods such as the frequency tuning effect and the double frequency heating are widely used for enhancing the performances of ECRIS or even for the routine operation during the beam production. In order to better investigate these effects the CAPRICE ECRIS has been operated using these techniques. The ion beam properties for highly charged ions have been measured with beam diagnostic tools. The reason of the observed variations of this performance can be related to the different electromagnetic field patterns, which are changing inside the plasma chamber when the frequency is varying.
RESUMEN
Using improved beam diagnostic tools, the structure of an ion beam extracted from an electron cyclotron resonance ion source (ECRIS) becomes visible. Especially viewing targets to display the beam profile and pepper pot devices for emittance measurements turned out to be very useful. On the contrary, diagnostic tools integrating over one space coordinate like wire harps for profile measurements or slit-slit devices, respectively slit-grid devices to measure the emittance might be applicable for beam transport investigations in a quadrupole channel, but are not very meaningful for investigations regarding the given ECRIS symmetry. Here we try to reproduce the experimentally found structure on the ion beam by simulation. For the simulation, a certain model has to be used to reproduce the experimental results. The model is also described in this paper.
RESUMEN
The electromagnetic field within the plasma chamber of an electron cyclotron resonance ion source (ECRIS) and the properties of the plasma waves affect the plasma properties and ion beam production. We have experimentally investigated the "frequency tuning effect" and "double frequency heating" on the CAPRICE ECRIS device. A traveling wave tube amplifier, two microwave sweep generators, and a dedicated experimental set-up were used to carry out experiments in the 12.5-16.5 GHz frequency range. During the frequency sweeps the evolution of the intensity and shape of the extracted argon beam were measured together with the microwave reflection coefficient. A range of different ion source parameter settings was used. Here we describe these experiments and the resultant improved understanding of these operational modes of the ECR ion source.
RESUMEN
Coupling improvements between microwaves and plasmas are a key factor to design more powerful electron cyclotron resonance and microwave ion sources. On this purpose different activities have been undertaken by the INFN-LNS ion source team and a new approach was developed. Recent experiments confirmed the simulations, demonstrating that even in presence of a dense plasma, resonant modes are excited inside the cavity and the plasma dynamics depends on their structure. An overview of the coupling issues on microwave ion sources is also given along with a discussion on alternative coupling techniques.
RESUMEN
The suitable source for the production of intense beams for high power accelerators must obey to the request of high brightness, stability, and reliability. The 2.45 GHz off-resonance microwave discharge sources are the ideal device to generate the requested beams, as they produce multimilliampere beams of protons, deuterons, and monocharged ions, remaining stable for several weeks without maintenance. A description of different technical designs will be given, analyzing their strength, and weakness, with regard to the extraction system and low energy beam transport line, as the presence of beam halo is detrimental for the accelerator.
RESUMEN
The emittance of an extracted ion beam can be estimated to first order by a series of three linear independent profile measurements. This estimation is restricted to the evaluation of an upper limit of the emittance value for a homogeneous, nonfilamented beam. The beam is assumed to be round, respectively elliptical, without any structure of the intensity distribution, no space charge has been assumed for the drifting beam, and the optics is assumed to be linear. Instead of using three different drift sections, a linear focusing element with three different focusing strengths can be used. Plotting the beam radius as function of focusing strength, three independent solutions can be used to calculate the Twiss parameters alpha, beta, and gamma and furthermore the emittance epsilon. Here we describe the measurements which have been performed with the SECRAL ion source at Institute of Modern Physics Lanzhou.
RESUMEN
OBJECTIVES: The objective of this study was to investigate the extent of resistance patterns and associated mobile genetic elements in epidemic V. cholerae O1 El Tor strains isolated from Eastern Africa in the late 1990s. METHODS: Self-transmissible genetic elements and associated clusters of genes encoding resistance were detected by conjugation experiments. Detection of SXT-related integrating conjugative elements (ICEs) and associated antibiotic resistance genes was performed by PCR to amplify the SXT element-integrase gene (int), right SXT element-chromosome junction (attP-prfC) and genes conferring resistance to chloramphenicol (floR), sulfamethoxazole (sulII), streptomycin (strA) and trimethoprim (dfrA1). Genomic relatedness was established by random amplified polymorphic DNA patterns. RESULTS: Of 224 strains analysed, 200 isolates exhibited resistance to four or more antimicrobials. An IncC plasmid, encoding resistance to ampicillin, chloramphenicol, streptomycin, sulfamethoxazole and trimethoprim, conferred multidrug resistance to 113 strains isolated from Somalia and Ethiopia, whereas an SXT-related ICE, encoding resistance to chloramphenicol, streptomycin, sulfamethoxazole and trimethoprim, conferred multidrug resistance to 74 strains isolated from Sudan, Kenya and Tanzania. CONCLUSIONS: This study has shown the spread of SXT-related ICEs among V. cholerae O1 African isolates. It has also highlighted the role of two distinct genetic elements in conferring multiple resistance to the two distinct groups of V. cholerae O1 strains that, in the late 1990s, spread through Eastern Africa, a critical geographic region for the persistence and transmission of cholera to the entire continent.
Asunto(s)
Cólera/microbiología , Conjugación Genética , Farmacorresistencia Bacteriana Múltiple , Secuencias Repetitivas Esparcidas , Plásmidos , Vibrio cholerae O1/efectos de los fármacos , Vibrio cholerae O1/genética , África Oriental/epidemiología , Antibacterianos/farmacología , Técnicas de Tipificación Bacteriana , Cólera/epidemiología , Análisis por Conglomerados , Dermatoglifia del ADN , ADN Bacteriano/química , ADN Bacteriano/genética , Genotipo , Humanos , Datos de Secuencia Molecular , Reacción en Cadena de la Polimerasa/métodos , Técnica del ADN Polimorfo Amplificado Aleatorio , Análisis de Secuencia de ADN , Vibrio cholerae O1/clasificación , Vibrio cholerae O1/aislamiento & purificaciónRESUMEN
In an electron cyclotron resonance ion source, ions are produced from a plasma generated and sustained by microwaves with a proper frequency. Some experiments showed that the plasma formation, the consequent amount of particles extracted from the source, and the related beam shape strongly depend on the frequency of the electromagnetic wave feeding the cavity. In order to have a better understanding of these phenomena, in this work we deal with the description of the motion of a charged particle inside the plasma chamber model of the SERSE ion source operating at INFN-LNS in Catania, the analysis being applicable to any similar apparatus. The electromagnetic fields inside the vacuum filled chamber were determined theoretically and, together with proper simulations, their fundamental role on the particle motion, on their confinement, and on the energy transfer they are subjected to during their motion within the cavity is shown.
RESUMEN
Intense heavy ion beam production with electron cyclotron resonance (ECR) ion sources is a common requirement for many of the accelerators under construction in Europe and elsewhere. An average increase of about one order of magnitude per decade in the performance of ECR ion sources was obtained up to now since the time of pioneering experiment of R. Geller at CEA, Grenoble, and this trend is not deemed to get the saturation at least in the next decade, according to the increased availability of powerful magnets and microwave generators. Electron density above 10(13) cm(-3) and very high current of multiply charged ions are expected with the use of 28 GHz microwave heating and of an adequate plasma trap, with a B-minimum shape, according to the high B mode concept [S. Gammino and G. Ciavola, Plasma Sources Sci. Technol. 5, 19 (1996)]. The MS-ECRIS ion source has been designed following this concept and its construction is underway at GSI, Darmstadt. The project is the result of the cooperation of nine European institutions with the partial funding of EU through the sixth Framework Programme. The contribution of different institutions has permitted to build in 2006-2007 each component at high level of expertise. The description of the major components will be given in the following with a view on the planning of the assembly and commissioning phase to be carried out in fall 2007. An outline of the experiments to be done with the MS-ECRIS source in the next two years will be presented.
RESUMEN
A set of measurements with the CAPRICE ion source at the GSI test bench has been carried out to investigate its behavior in terms of intensity and shape of the extracted beam when the microwaves generating the plasma sweep in a narrow range of frequency (+/-40 MHz) around the klystron center frequency (14.5 GHz). Remarkable variations have been observed depending on the source and the beamline operating parameters, confirming that a frequency dependent electromagnetic distribution is preserved even in the presence of plasma inside the source. Moreover, these observations confirm that the frequency tuning is a powerful method to optimize the electron cyclotron resonance ion source performances. A description of the experimental setup and of the obtained results is given in the following.
RESUMEN
We study a particular return map for a class of low-dimensional chaotic models called Kolmogorov-Lorenz systems, which received an elegant general Hamiltonian description and also includes the famous Lorenz-63 case, from the viewpoint of energy and Casimir balance. In particular, a subclass of these models is considered in detail, precisely those obtained from the Lorenz-63 by a small perturbation on the standard parameters, which includes, for example, the forced Palmer-Lorenz case. The paper is divided into two parts. In the first part the extremes of the mentioned state functions are considered, which define an invariant manifold, used to construct an appropriate Poincaré surface for our return map. From the "experimental" observation of the simple orbital motion around the two unstable fixed points, together with the circumstance that these orbits are classified by their energy or Casimir maximum, we construct a conceptually simple skeletal dynamics valid within our subclass, reproducing quite well the Lorenz cusp map for the Casimir maximum. This energetic approach sheds some light on the "physical" mechanism underlying the regime transitions. The second part of the paper is devoted to an investigation of a type of maximum energy-based long-term predictions, by which knowledge of a particular maximum energy "shell" amounts to knowledge of the future (qualitative) behavior of the system. It is shown, in this respect, that a local analysis of predictability is not appropriate for a complete characterization of this behavior. A perspective on the possible extensions of this type of predictability analysis to more realistic cases in (geo)fluid dynamics is discussed at the end of the paper.
RESUMEN
Eighty Vibrio cholerae O1 strains selected to represent the 1998-to-1999 history of the largest cholera epidemic in Kenya were characterized by ribotyping, antimicrobial susceptibility, and random amplified polymorphic DNA patterns. Except for 19 strains from 4 local outbreaks in North Eastern Province along the Somalia border, the other 61 strains from 25 outbreaks occurring in districts scattered around the country were all ribotype B27 and resistant to chloramphenicol, spectinomycin, streptomycin, sulfamethoxazole, and trimethoprim. The 61 strains showed similar and specific amplified DNA patterns. These findings indicate that the predominant strains that caused the Kenyan epidemic had a clonal origin and suggest that ribotype B27 strains, which first appeared in West Africa in 1994, have had a rapid spread to eastern Africa.
Asunto(s)
Cólera/epidemiología , Brotes de Enfermedades , Vibrio cholerae O1/clasificación , Vibrio cholerae O1/genética , Antibacterianos/farmacología , Proteínas Bacterianas/genética , Técnicas de Tipificación Bacteriana , Cólera/microbiología , Farmacorresistencia Bacteriana Múltiple , Humanos , Kenia/epidemiología , Pruebas de Sensibilidad Microbiana , Técnica del ADN Polimorfo Amplificado Aleatorio , Ribotipificación , Vibrio cholerae O1/efectos de los fármacosRESUMEN
Zonula occludens toxin (Zot) is an enterotoxin elaborated by Vibrio cholerae that increases intestinal permeability by interacting with a mammalian cell receptor with subsequent activation of intracellular signaling leading to the disassembly of the intercellular tight junctions. Zot localizes in the bacterial outer membrane of V. cholerae with subsequent cleavage and secretion of a carboxyl-terminal fragment in the host intestinal milieu. To identify the Zot domain(s) directly involved in the protein permeating effect, several zot gene deletion mutants were constructed and tested for their biological activity in the Ussing chamber assay and their ability to bind to the target receptor on intestinal epithelial cell cultures. The Zot biologically active domain was localized toward the carboxyl terminus of the protein and coincided with the predicted cleavage product generated by V. cholerae. This domain shared a putative receptor-binding motif with zonulin, the Zot mammalian analogue involved in tight junction modulation. Amino acid comparison between the Zot active fragment and zonulin, combined with site-directed mutagenesis experiments, confirmed the presence of an octapeptide receptor-binding domain toward the amino terminus of the processed Zot.
Asunto(s)
Toxina del Cólera/química , Uniones Estrechas/química , Secuencia de Aminoácidos , Animales , Western Blotting , Línea Celular , Células Cultivadas , Electroforesis en Gel de Poliacrilamida , Endotoxinas , Células Epiteliales/metabolismo , Eliminación de Gen , Intestino Delgado/citología , Masculino , Microscopía Fluorescente , Datos de Secuencia Molecular , Mutagénesis Sitio-Dirigida , Mutación , Unión Proteica , Estructura Terciaria de Proteína , Conejos , Ratas , Homología de Secuencia de Aminoácido , Relación Estructura-ActividadRESUMEN
A modified version of the method of Kado and Liu (J Bacteriol 1981, 145: 1365) has been developed for rapid detection and direct cleavage analysis of large plasmids from Vibrio cholerae and other enteric pathogens.
Asunto(s)
ADN Bacteriano/análisis , Plásmidos/genética , Polimorfismo de Longitud del Fragmento de Restricción , Vibrio cholerae/genética , ADN Bacteriano/genética , ADN Bacteriano/aislamiento & purificación , Enterobacteriaceae/genéticaRESUMEN
The prevalence of Vibrio cholerae O1 and non-O1 has been investigated in numerous Somali regions of the Horn of Africa from 1983 to 1990. From January 1983 to January 1985 and between December 1986 and December 1990, no strains of V. cholerae O1 and 226 strains (5.3%) of V. cholerae non-O1 were isolated from 4,295 diarrhea cases. During a cholera epidemic in 1985 and 1986, the overall case-fatality rate was 13% and the attack rate was 3-3.5 per 1,000 population. Matched case-control studies identified a waterborne route of transmission. A drug-susceptible Ogawa strain from Ethiopia caused the introduction of the disease into northern Somalia. There were two major resistant derivatives of the original strain, and the one resistant to ampicillin, kanamycin, streptomycin, sulfonamide, and tetracycline (TC) predominated in the spreading disease. In 1986, susceptible Ogawa strains quickly displaced this resistant strain. The two incompatibility group C plasmids responsible for the resistance patterns had complex and scattered differences in their structures. Physical analysis of the plasmid DNA region coding for TC resistance demonstrated its genetic amplification in highly resistant variants of Ogawa strains.