RESUMEN
Introduction Small compounds like L-leucine can boost bone regrowth by blocking certain effects, sparking cell reactions through signaling sequences. This research explored how combining L-leucine with hyaluronic acid on the developed novel graft material affects the bone's ability to conduct bone-building processes. Material and methods This study was designed as an in-vitro experiment, where a novel bone graft was formulated by integrating L-leucine with hyaluronic acid and incorporated into a hydroxyapatite-based ovine bone graft material. The sintering procedure was modified to include the amino acid L-arginine. Comprehensive examinations were executed using methodologies such as scanning electron microscopy, X-ray diffractometry, Fourier-transform infrared spectroscopy (FTIR), MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay, and bone formation assay. These analyses were juxtaposed with the characteristics of the commercially accessible unaltered Bio-Oss, focusing on their physicochemical properties. The properties were compared with a commercially available bone graft material. Results The sintered hydroxyapatite/L-leucine graft displayed an interconnected pore structure, indicating that higher sintering and consolidation affected hydroxyapatite, as observed through scanning electron microscopy. X-ray diffraction (XRD) analysis confirmed hydroxyapatite in the sintered ovine bone samples, affirming their suitability for various biomedical applications. In the bone formation assay, optical density (OD) values were 61% for the hydroxyapatite/L-arginine graft, 58% for the Bio-Oss group, and 51% for the control group. The MTT assay, which assesses cell viability and metabolic activity, demonstrated biocompatibility and cell growth for all samples at 24 hours. Conclusion The research noted beneficial outcomes by incorporating L-leucine into the novel bone graft material with hyaluronic acid for bone grafting, demonstrating enhanced compatibility with existing bone tissue. However, the specific advantages of this combined approach are not fully known. It is essential to conduct more studies to uncover how this synergy works, assess its prolonged impacts, carry out clinical tests, and enhance the effectiveness of this blend for practical applications in bone graft surgeries.
RESUMEN
Introduction Provisional prosthetic restorations play a crucial role in dentistry by protecting dentinal tubules, offering thermal insulation, and ensuring a precise fit during dental treatments. Computer-aided design and computer-aided manufacturing (CAD/CAM) have improved polymethyl methacrylate (PMMA), enhancing its mechanical properties such as hardness and resistance compared to traditional methods. However, bacterial accumulation remains a challenge due to inherent surface roughness. This study aims to assess and compare Streptococcus mutans adhesion on milled PMMA and conventional self-cure acrylic resin, providing insights into their microbial interaction dynamics. Materials and methods This study was a prospective trial approved by the Institutional Human Ethical Committee (SRB-IHEC) (registration number: IHEC/SDC/PROSTHO-2104/24/045) and registered in the Clinical Trial Registry, India (registration number: CTRI/2024/05/068196). The study involved 20 patients requiring single crowns in the right and left molar regions. Two groups were established: Group I (the milled PMMA group) and Group II (the conventional PMMA group). Criteria for participant selection and exclusion were set. A total of 120 swab samples from the buccal mucosa and tooth surfaces were collected before tooth preparation (the baseline) at one week and three weeks. Culture for S. mutans was done, and colony-forming units were counted. Data analysis was carried out using IBM SPSS Statistics for Windows, Version 26 (Released 2019; IBM Corp., Armonk, New York, United States). An independent sample t-test was employed to compare the two materials for crowns. To analyze changes over time within each group, a repeated-measures analysis of variance (ANOVA) was conducted. When the ANOVA test indicated significance, Tukey's post-hoc test was utilized for pairwise mean comparison. The level of significance was set at P < 0.05. Results The mean colony-forming units (CFU) counts for the milled PMMA group were 4.46 ± 0.167 CFU at baseline, 4.163 ± 0.058 CFU at one week, and 3.87 ± 0.19 CFU at three weeks. The mean CFU counts for the conventional PMMA group were 4.41 ± 0.13 CFU at baseline, 4.29 ± 0.114 CFU at one week, and 4.16 ± 0.108 CFU at three weeks. At baseline (before cementation), there was no difference between milled PMMA and conventional PMMA (P = 0.578). After one week, a significant difference between milled PMMA and conventional PMMA was observed (P < 0.005). After three weeks, a significant difference between milled PMMA and conventional PMMA persisted (P < 0.005). Conclusion There was a significant reduction in microbial adhesion in both the milled and conventional PMMA groups. However, milled PMMA demonstrated a greater decrease in microbial adhesion as compared to conventional PMMA.
RESUMEN
The heterogeneous distribution of lipids and lipid-bound proteins in a plasma membrane has functional advantages. Herein, in a synthetic system, we demonstrate the assembly of three enzymes involved in cascade reactions, in response to the substrate of the first enzyme at the oil-water interface being stabilized by a Zn(II)-metallosurfactant. Then we show substrate-mediated catalytically-active cluster formation of the metallosurfactant in a binary mixture with another non-catalytic surfactant at the interface. The catalytic ability can be tuned by controlling clustering through the addition of phosphate ions. Overall this work demonstrates functionally diverse supramolecular nanoarchitectonics at the oil-water interface.
RESUMEN
Although cellular transport machinery is mostly ATP-driven and ATPase-dependent, there has been a recent surge in understanding colloidal transport processes relying on a nonspecific physical interaction with biologically significant small molecules. Herein, we probe the phoretic behavior of a biocolloid [composed of a Zn(II)-coordinated metallomicelle and enzymes horseradish peroxidase (HRP) and glucose oxidase (GOx)] when exposed to a concentration gradient of ATP under microfluidic conditions. Simultaneously, we demonstrate that an ATP-independent oxidative biocatalytic product formation zone can be modulated in the presence of a (glucose + ATP) gradient. We report that both directionality and extent of transport can be tuned by changing the concentration of the ATP gradient. This diffusiophoretic mobility of a submicrometer biocolloidal object for the spatial transposition of a biocatalytic zone signifies the ATP-mediated functional transportation without the involvement of ATPase. Additionally, the ability to analyze colloidal transport in microfluidic channels using an enzymatic fluorescent product-forming reaction could be a new nanobiotechnological tool for understanding transport and spatial catalytic patterning processes. We believe that this result will inspire further studies for the realization of elusive biological transport processes and target-specific delivery vehicles, considering the omnipresence of the ATP-gradient across the cell.
RESUMEN
Background Glass ionomer cement (GIC) serves as a crucial biomaterial in dental restoration, offering applications in filling, lining, and adhesive procedures. Nevertheless, its mechanical properties often fall short, particularly in regions subjected to considerable stress. To address this issue, zirconia nanoparticles are incorporated at specific levels. Aim To assess the antimicrobial efficacy and compressive resilience of GIC modified with zirconia nanoparticles synthesized through green synthesis methods. Material and methods Zirconia nanoparticles were synthesized via a green method utilizing aloe vera extract in solvent form. These nanoparticles were then mixed into GIC at different concentration levels. Group I incorporated zirconia nanoparticles at a concentration of 3%, Group II at 5%, and Group III at 10%, while Group IV was the control, consisting of traditional GIC. Following that, samples were prepared and underwent characterization through various analytical techniques. The ability to inhibit microbial growth and the compressive resilience of the groups were examined. Microbial inhibition against the bacterial strains was assessed through minimum inhibitory concentration (MIC), and the ability to withstand compression was gauged by measuring the maximum force the specimen could endure before fracturing. Data underwent analysis with Statistical Package for the Social Sciences (IBM SPSS Statistics for Windows, IBM Corp., Version 24.0, Armonk, NY). Repeated measures of analysis of variance (ANOVA) were utilized to gauge average MIC values and compressive strength. Following this, Tukey's post hoc test was employed for pairwise comparisons. Results The findings indicated, incorporating zirconia nanoparticles into GIC led to an improvement in its antimicrobial effectiveness, with a noticeable enhancement observed as the weight percent (% wt) of the additive increased. This improvement was notably noticeable in its effectiveness against Streptococcus mutans and Lactobacillus, exceeding that of the control with a noteworthy distinction. Furthermore, there were significant enhancements in compressive strength, in Group I (180.48 ± 1.02), Group II (191.25 ± 0.52), and Group III (197.52 ± 0.75), compared to Group IV (167.22 ± 1.235), with significant disparities (p < 0.05). Conclusion The research illustrates that introducing green-synthesized zirconia nanoparticles into GIC leads to heightened bactericidal potency and compressive resilience when contrasted with the control group (Group IV). Notably, the highest concentration of 10% demonstrated the most favourable antimicrobial attributes alongside enhanced strength. Consequently, integrating green-synthesized zirconia nanoparticles into GIC holds potential as a proficient material. In future studies, there should be an exploration of molecular chemistry and bonding mechanisms to enhance our comprehension of its capabilities.
RESUMEN
AIM: This study investigates the interaction of zirconia and polyetheretherketone (PEEK) with indirect composite in fixed dental prostheses. This investigation aimed to assess the shear bond strength (SBS) and color stability of zirconia and PEEK before and after aging, addressing critical concerns in dental restorative applications. SETTINGS AND DESIGN: The current in vitro study used 96 samples, 48 of which were divided into two groups, zirconia and PEEK, before and after thermocycling. A dual-axis chewing simulator was used for thermocycling. SBS was measured using a universal testing machine, and color stability was checked using a reflective spectrophotometer. MATERIALS AND METHODS: Ninety-six samples were categorized into zirconia and PEEK groups, each with subgroups undergoing thermocycling. Samples were prepared using computer-aided design/computer-aided manufacturing milling and veneered with composite resin. Thermocycling involved 10,000 cycles, simulating stress levels equivalent to approximately 1 year of clinical use. SBS was assessed using standardized tests. Stereomicroscopic analysis was performed to evaluate the type of failure. Color stability of the core materials with indirect composite was done using a spectrophotometer before and after aging. STATISTICAL ANALYSIS USED: Statistical analysis included paired t-tests and independent t-tests in SPSS software. RESULTS: The results revealed that SBS values for composite on PEEK decreased from 13.86 ± 0.164 MPa before thermocycling to 13.46 ± 0.185 MPa after thermocycling, with a significant difference (P < 0.005). However, both pre- and postthermocycling values for PEEK were higher than zirconia. The t-test confirmed the lower bond strength of composite to zirconia, with a noteworthy improvement after aging. Stereomicroscopic images revealed adhesive failure for the zirconia group and mixed (adhesive and cohesive) failure for the PEEK group. ΔE values were 3.21 ± 0.127 and 2.93 ± 0.142 for zirconia and PEEK groups, respectively (P < 0.005). CONCLUSION: Within the limitations of this study, it can be deduced that PEEK is a feasible substitute for zirconia when used in conjunction with indirect composite for the fabrication of dental prostheses.
Asunto(s)
Benzofenonas , Color , Resinas Compuestas , Recubrimiento Dental Adhesivo , Cetonas , Polietilenglicoles , Polímeros , Circonio , Circonio/química , Cetonas/química , Polietilenglicoles/química , Polímeros/química , Resinas Compuestas/química , Técnicas In Vitro , Recubrimiento Dental Adhesivo/métodos , Ensayo de Materiales , Resistencia al Corte , Materiales Dentales/química , Análisis del Estrés Dental , HumanosRESUMEN
Development of an energy-driven self-assembly process is a matter of interest for understanding and mimicking diverse ranges of biological and environmental patterns in a synthetic system. In this article, first we demonstrate transient and temporally controlled self-assembly of a DNA-histone condensate where trypsin (already present in the system) hydrolyzes histone, resulting in disassembly. Upon performing this dynamic self-assembly process in a gel matrix under an electric field, we observe diverse kinds of DNA patterning across the gel matrix depending on the amount of trypsin, incubation time of the reaction mixture, and gel porosity. Notably, here, the micrometer-sized DNA-histone condensate does not move through the gel and only free DNA can pass; therefore, transport and accumulation of DNA at different zones depend on the release rate of DNA by trypsin. Furthermore, we show that the viscoelasticity of the native gel increases in the presence of DNA and a pattern over gel viscoelasticity at different zones can be achieved by tuning the amount of enzyme, i.e., the dissociation rate of the DNA-histone condensate. We believe enabling spatiotemporally controlled DNA patterning by applying an electric field will be potentially important in designing different kinds of spatiotemporally distinct dynamic materials.
Asunto(s)
ADN , Elasticidad , Histonas , Hidrogeles , Tripsina , ADN/química , Histonas/química , Histonas/metabolismo , Tripsina/química , Tripsina/metabolismo , Hidrogeles/química , Viscosidad , ElectroforesisRESUMEN
Background Glass ionomer cement (GIC) plays a vital role in dental restorative procedures, serving purposes such as filling, luting, and adhesion. However, its inadequate mechanical properties pose challenges, especially in areas experiencing significant stress. To overcome this limitation, nanohydroxyapatite (nHA), known for its bioactive phosphate content, is added to the GIC at specific concentrations to improve its properties. Aim We aim to evaluate the antimicrobial property and compressive strength of green-mediated nHA-incorporated GIC. Material and methods Green synthesis of hydroxyapatite nanoparticles was prepared using Moringa oleifera extract in a solvent form and eggshell waste served as the calcium source. These nHA powders were then integrated into the GIC at varying concentrations (3%, 5%, and 10%) designated as Group I, Group II, and Group III, respectively, while Group IV (control) consisted of conventional GIC. Specimens were fabricated and subjected to chemical structure analysis through Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray (EDX), and scanning electron microscopy (SEM). The antimicrobial activity and compressive strength of all groups were investigated. The antimicrobial activity against Streptococcus mutans and Lactobacillus was evaluated through the minimum inhibitory concentration (MIC) test, while compressive strength was evaluated by measuring the maximum force endured by the specimen before fracturing. Data analysis utilized IBM SPSS Statistics software, employing repeated measures ANOVA to determine mean MIC values and compressive strength, with Tukey's posthoc test for pairwise comparisons. Results The results of the study showed that the antimicrobial efficacy of nHA GIC improved with increasing weight percent (% wt) of the additive, exhibiting significantly enhanced activity against Streptococcus mutans and Lactobacillus compared to the control group (Group IV) with statistical significance (p < 0.05). Moreover, the compressive strength exhibited notable enhancements in the modified groups, including Group I (172.55 ± 0.76), Group II (178.16 ± 0.760), and Group III (182.45 ± 0.950), when compared to the control (162.46 ± 1.606), with statistically significant differences (p < 0.05). Conclusion The study demonstrates that the incorporation of green-mediated nHA-containing GIC results in superior antimicrobial efficacy and compressive strength compared to the control group (Group IV). In particular, the highest concentration of nHA-modified GIC (10%) exhibited the most favorable antimicrobial properties along with increased strength. Therefore, utilizing green-mediated nHA in the GIC shows promise as an effective restorative material. Future investigations should delve into the molecular chemistry and bonding mechanisms to further explore its potential.
RESUMEN
Background and objective Glass ionomer cement (GIC), also known as polyalkenoate cement, has been extensively used in dentistry for both luting and restorative purposes. Despite being the first choice for aesthetic restorations due to their chemical bonding ability to teeth, GICs have faced challenges such as low mechanical properties, abrasion resistance, and sensitivity to moisture, leading to the search for improved materials. This study aims to assess the effects of thermocycling on the compressive, flexural strength, and microhardness of green-mediated nanocomposite-modified GIC in comparison to traditional GIC. Methodology Green-mediated nanoparticles, consisting of chitosan, titanium, zirconia, and hydroxyapatite (Ch-Ti-Zr-HA), were synthesized using a one-pot synthesis technique to form nanocomposites. These nanocomposites were then incorporated into GIC specimens in varying concentrations (3%, 5%, and 10%), denoted as Group I, Group II, and Group III, respectively. Group IV served as the control, consisting of conventional GIC. To assess the performance of the novel restorative materials over an extended period, compressive strength, flexural strength, and microhardness were measured before and after thermocycling using a universal material testing machine. Furthermore, scanning electron microscopy (SEM) analysis was carried out following the thermocycling process. The collected data were subjected to statistical analysis through one-way analysis of variance (ANOVA) and paired t-tests. Results The findings demonstrated that, in comparison to the control group, both the mean compressive strength and flexural strength, as well as hardness, were notably higher for the 10% and 5% nanocomposite-modified GIC specimens before and after thermocycling (P < 0.05). Notably, there was no notable difference observed between the 5% and 10% concentrations (P > 0.05). These results suggest that incorporating green-mediated nanocomposites (Ch-Ti-Zr-HA) modified GIC at either 5% or 10% concentration levels leads to improved mechanical properties, indicating their potential as promising alternatives in dental restorative materials. Conclusions Based on our findings, it can be inferred that the 10% and 5% concentrations of green-mediated (Ch-Ti-Zr-HA) modified GIC exhibit superior compressive and flexural strength compared to conventional GIC. Additionally, analysis of the scanning electron microscope (SEM) morphology revealed that green-mediated GIC displays smoother surface characteristics in contrast to conventional GIC. These results underscore the potential advantages of utilizing green-mediated nanocomposite-modified GIC in dental applications, suggesting enhanced mechanical properties and surface quality over conventional.
RESUMEN
Background Glass ionomer cement (GIC) demonstrates biocompatibility and fluoride ion release, indicating their potential to inhibit a wide range of bacteria, although this remains uncertain. Lemongrass and neem are recognized for their potent antimicrobial activity against numerous pathogenic microorganisms. The objective of the study is to evaluate the antimicrobial effectiveness and compressive strength of GIC modified with neem and lemongrass. Methodology Lemongrass and neem were incorporated into conventional GIC at varying concentrations. Group I - neem-modified GIC (0.5%, 1%, 2%), group II - lemongrass-modified GIC (0.5%, 1%, 2%), and group III (non-modified GIC as a control group). The disk-shaped specimens were then compared to unmodified GIC (control). Antimicrobial effectiveness was assessed using the minimal inhibitory concentration (MIC) assay against Streptococcus mutans and Lactobacillus. Compressive strength was assessed using a Universal Testing Machine, with a crosshead speed set to 0.5 mm per minute. Statistical analysis was conducted with a significance level set at p < 0.05. Results Neem modification displayed superior antimicrobial effectiveness against both Streptococcus mutans and Lactobacillus at all concentrations when compared to the control, with 2% showing the least mean value of 0.262. In contrast, lemongrass modification exhibited a significant difference in effectiveness against Streptococcus mutans but no difference against Lactobacillus. Neem modification demonstrated superior performance compared to lemongrass (p < 0.05). Both modified groups showed no significant impact on compressive strength. Conclusions Neem-modified GIC demonstrated the highest antimicrobial efficacy against Streptococcus mutans and Lactobacillus without altering its compressive strength. This suggests its potential as a promising alternative material in restorative dentistry. Additional in vivo investigations are needed to assess the extended-term effectiveness of the material.
RESUMEN
The ability to sense chemical gradients and respond with directional motility and chemical activity is a defining feature of complex living systems. There is a strong interest among scientists to design synthetic systems that emulate these properties. Here, we realize and control such behaviors in a synthetic system by tailoring multivalent interactions of adenosine nucleotides with catalytic microbeads. We first show that multivalent interactions of the bead with gradients of adenosine mono-, di- and trinucleotides (AM/D/TP) control both the phoretic motion and a proton-transfer catalytic reaction, and find that both effects are diminished greatly with increasing valence of phosphates. We exploit this behavior by using enzymatic hydrolysis of ATP to AMP, which downregulates multivalent interactivity in situ. This produces a sudden increase in transport of the catalytic microbeads (a phoretic jump), which is accompanied by increased catalytic activity. Finally, we show how this enzymatic activity can be systematically tuned, leading to simultaneous in situ spatial and temporal control of the location of the microbeads, as well as the products of the reaction that they catalyze. These findings open up new avenues for utilizing multivalent interaction-mediated programming of complex chemo-mechanical behaviors into active systems.
Asunto(s)
Adenosina Trifosfato , Adenosina Trifosfato/metabolismo , Adenosina Trifosfato/química , Hidrólisis , Catálisis , Coloides/química , Microesferas , Adenosina Monofosfato/metabolismo , Adenosina Monofosfato/química , Adenosina/metabolismo , Adenosina/químicaRESUMEN
Background Glass ionomer cement (GIC) is widely recognized for its self-adhesive characteristics and biocompatibility, making it commonly used as a restorative material. However, challenges related to limited antibacterial effectiveness and relatively low mechanical properties have hindered its widespread clinical use. Clove and ginger are recognized for their potent antimicrobial activity against numerous pathogenic microorganisms. The present study aims to enhance the clinical applicability of GIC by modifying it with clove and ginger extract. Aim The objective of the study is to assess the antimicrobial effectiveness and compressive strength of GIC modified with ginger and clove extract. Materials and methods Ginger and clove extracts were prepared and incorporated into conventional GIC at three concentrations for each, creating ginger-modified GIC groups (Group A, Group B, and Group C) and clove-modified GIC groups (Group D, Group E, and Group F), with Group G as the control (conventional GIC without modification). The antimicrobial assessment was conducted on disc-shaped GIC specimens (3.0 mm height x 6.0 mm diameter) prepared using molds. Bacterial strains were used to evaluate antimicrobial properties, with minimum inhibitory concentration (MIC) assays conducted at intervals of one to four hours for both modified and unmodified groups. Compressive strength specimens were prepared using cylindrical molds (6.0 mm height × 4.0 mm diameter), according to the ISO (International Organization for Standardization) guidelines. The evaluation was conducted using a Zwick universal testing machine (ElectroPuls® E3000, Instron, Bangalore, India), with the highest force at the point of specimen fracture recorded to determine compressive strength. Statistical analysis was conducted utilizing a one-way analysis of variance (ANOVA) alongside Tukey's post hoc test, with a significance threshold set at p < 0.01. Results The antimicrobial effectiveness of clove and ginger-modified GIC was assessed through a MIC assay, revealing a statistically significant improvement in antimicrobial potency against Streptococcus mutans and Lactobacillus within the modified groups compared to the control group (p < 0.01). Increased extract concentration correlated with enhanced antimicrobial activity. Clove-modified GIC exhibited superior antimicrobial efficacy compared to ginger extract. Compressive strength was higher in clove-modified GIC groups (p < 0.01), with Group F showing a maximum value of 175.88 MPa, while other modified groups demonstrated similar results to the control, with a value of 166.81 MPa (p > 0.01). Conclusion The study concludes that both clove-modified GIC and ginger-modified GIC exhibited antimicrobial activity against Streptococcus mutans and Lactobacillus species. The antimicrobial activity was notably higher in clove-modified GIC compared to ginger-modified GIC. Additionally, the compressive strength of clove-modified GIC surpassed all other groups. Thus, clove-modified GIC emerges as a promising restorative material for addressing recurrent caries. Future investigation is necessary to assess the long-term durability of the material.
RESUMEN
Aim The study aims to evaluate the efficacy of different techniques for temporary crown fabrication in maintaining periodontal health and patient satisfaction, addressing a critical gap in the existing literature and informing evidence-based clinical practices. Materials and methods This study, conducted in accordance with CONSORT guidelines, was a parallel-group randomised trial conducted at a dental institute in India. In total, 36 participants aged 18-65 requiring anterior tooth region crowns were randomly assigned to three groups: direct (control), indirect (Test Group 1) and direct-indirect (Test Group 2) fabrication techniques. Participants were selected from outpatient departments based on eligibility criteria, and interventions were allocated using randomization tables. Outcome assessments included gingival health metrics and patient satisfaction levels, with statistical analyses performed using the Kruskal-Wallis test. Results Significant differences were observed in the pink esthetic score (PES) and patient satisfaction (P=0.029) among the three groups, with the direct-indirect technique group demonstrating the highest median PES (9 out of 10). However, no significant disparities were noted in the plaque index (PI) or probing depth (PD) among the groups. Conclusion The direct-indirect technique demonstrated superior PES and patient satisfaction, indicating potential benefits for periodontal health and patient experiences. Integration of virtual preparation workflows may optimise outcomes, but further research is needed for validation and guideline development.
RESUMEN
The aim of this systematic review was to identify and analyze the findings of various studies that analyzed the changes in the color stability of maxillofacial prosthetic materials after the addition of various colorants and nanoparticles and assess the change in color after being subjected to either natural or artificial accelerated aging as well as outdoor aging. This systematic review was conducted in accordance with the guidelines of transparent reporting of systematic reviews and meta-analysis (PRISMA Statement). The primary objective of this systematic review was to evaluate the color stability of maxillofacial prosthesis. The secondary objective was to assess the effect of various colorants; pigments; opacifiers; UV absorbers-such as inorganic colorants (dry earth pigments); metal oxides; and organic colorants. The time period of the included studies extended from 2013 to 2023. Electronic database search identified a total of 217 studies. Ten studies were included to meet the research question. All 10 included studies analyzed the effect of various colorants and their exposure to various aging and weathering conditions. It was found that various pigments and nanoparticles had an effect on the color stability. Also weathering and aging conditions had a direct effect on the color stability as well. In terms of disinfection, although there was not much color difference observed, highest change in color stability was observed when rubbing or brushing of the prosthesis was carried out. In conclusion, the color stability of maxillofacial prosthetics is a critical factor that influences both patient satisfaction and the overall cosmetic look. The potential of pigments and nanoparticles to enhance the color stability of silicone-based maxillofacial prosthesis has received much research. By avoiding color fading and discoloration brought on by environmental variables including UV radiation, aging, and chemical exposure, the inclusion of various pigments and nanoparticles has been demonstrated to improve the color stability of silicone maxillofacial prostheses.
Asunto(s)
Color , Prótesis Maxilofacial , Coloración de Prótesis , Humanos , Colorantes , NanopartículasRESUMEN
BACKGROUND: Glass ionomer cement (GIC) restorations are commonly used in primary dentition, due to their aesthetic appeal, self-adhesive nature, and biocompatibility. However, the material's limited antibacterial activity and inadequate mechanical strength highlight the necessity for modifying the material. AIM: The study aims to evaluate and compare the antimicrobial potency and compressive strength of GIC-incorporated Miswak extract with that of conventional GIC. MATERIALS AND METHODS: After obtaining the Miswak extract, a modified GIC was formulated by combining the extract with the conventional GIC powder and liquid components, in three different ratios (Powder: Extract and Liquid), Group I (2:1:1), Group II (3:1:2), Group III (3:2:1), and the Group IV as control, which consist of unmodified/conventional GIC. To evaluate and compare the antibacterial efficacy of the modified and unmodified GIC, standard strains of Streptococcus mutans and Lactobacillus were utilized. For each group, the minimal inhibitory concentration (MIC) assay was tested. For the evaluation of compressive strength, cylindrical moulds were utilized in compliance with ISO 9917-1:2007 standards and tested using the universal testing machine (Instron, ElectroPuls®, Bangalore, IND). The highest force exerted at the point of specimen fracture was recorded to calculate the compressive strength values in MPa. The data obtained were analyzed using the Statistical Package for the Social Sciences (IBM SPSS Statistics for Windows, IBM Corp., Version 24.0, Armonk, NY) software. The statistical analysis was conducted utilizing repeated measures of analysis of variance (ANOVA) to calculate the mean MIC values and compressive strength, with pairwise comparisons assessed using Tukey's post hoc test. RESULTS: The results proved that the antimicrobial properties of Miswak containing GIC performed better against S. mutans and Lactobacillus with a statistically significant difference when compared with group IV (p<0.05), it has been found that an increase in the concentration of extract increased the antimicrobial potency. Significant results were obtained in compressive strength where Group II (41.49±3.6) and Group III (15.23±4.96) proved to be weaker than the control (62.69±2.58), while Group I showed no differences from the control group (p>0.05). CONCLUSION: It can be concluded that Group I was found to be better in terms of both antimicrobial properties and compressive strength, where no significant difference in compressive strength was identified when comparing Group I with Group IV. Thus, the overall study depicts that a lesser concentration of extract can be the best option in terms of good antimicrobial properties without altering its strength. Hence, the Miswak containing GIC could be a promising restorative material; further studies should include considering intraoral variables such as masticatory stress, moisture levels and in-vivo tests of this combination.
RESUMEN
Background Discoloration affects glass ionomer cement (GIC) color stability due to its brittle nature and microporosity. To counter this, incorporating alternative materials is essential for maintaining color stability. Aim This study aims to determine the color stability and gloss of GIC modified with bioactive chitosan, titanium, zirconia, and hydroxyapatite nanoparticles before and after artificial aging. Materials and methods The study was conducted at Saveetha Research Centre, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, located in Chennai, India. Green-mediated chitosan, titanium, zirconia, and hydroxyapatite (Ch-Ti-Zr-HA) nanoparticles were synthesized using the one-pot synthesis technique. Forty-eight disc-shaped specimens were prepared by incorporating the obtained nanoparticles (nanocomposite) into the GIC, with a diameter of 5 mm and thickness of 2 mm. The specimens were prepared in different concentrations (3%, 5%, and 10%) designated as group I, group II, and group III, respectively. Group IV, serving as the control, consisted of conventional GIC without any modifications. Following preparation, scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) microanalysis confirmed sample elements, and the specimens were submerged in distilled water for a duration of 24 hours prior to the commencement of testing. Subsequently, the specimens underwent artificial aging (thermocycling), between temperatures of 5°C and 55°C, for a total of 30,000 cycles, with a 30-second dwell time. Color change and gloss characteristics were assessed both after 24 hours and following thermocycling using a spectrophotometer and glossometer, respectively. The average color change parameter (ΔE) was measured using Adobe Photoshop. The data obtained were subjected to statistical analysis using an unpaired t-test. Results Significant color stability variations were observed post thermocycling (P = 0.001). Group 2 (5%) exhibited minimal delta E difference (0.508 ± 0.105), indicating superior color stability, while group 4 (control) had maximum difference (1.15 ± 0.187), indicating lower stability. Gloss tests confirmed GIC's polishability, where there were significant differences among all the groups. Conclusion It can be concluded that 5% nanoparticle-modified GIC has better color stability and gloss than conventional GIC. Further studies are needed to analyze the color stability and gloss through dentifrices and other beverages.
RESUMEN
Background According to existing literature, introducing natural antibacterial agents into glass ionomer cement (GIC) has been associated with potential negative impacts on their strength properties. Hence, this study aims to explore the antibacterial effectiveness of glass ionomer cement enriched with Acacia nilotica and subsequently assess its compressive strength characteristics. Aim The objective of the study is to assess the antimicrobial effectiveness and compressive strength of glass ionomer cement modified with Acacia nilotica. Materials and methods The plant extract was incorporated into the conventional glass ionomer cement in three different proportions (powder GIC: extract: liquid GIC), divided into group I, group II, and group III with ratios of 2:1:1, 3:1:2, and 3:2:1 respectively. Additionally, a control group denoted as group IV was included without any modifications. Subsequently, the specimens were prepared, and their chemical structure was analyzed using Fourier transform infrared spectroscopy (FTIR), followed by testing for antimicrobial activity using the minimum inhibitory concentration (MIC) assay against Streptococcus mutans and Lactobacillus. The assessment of compressive strength was conducted following ISO 9917-1:2007 standards, and the recorded values represent the maximum force the specimen could withstand before fracturing. Results The antimicrobial effectiveness against Streptococcus mutans and Lactobacillus exhibited a notable increase in all modified specimens compared to the control group, with a significance level of p<0.05. Additionally, significant improvements in compressive strength were observed in group III (183.49±2.99) when compared to the remaining groups. The higher concentrations of the plant extract resulted in superior outcomes. Conclusion Therefore, the incorporation of Acacia nilotica into GIC shows promising potential as a restorative material. These investigations can provide valuable insights into the material's performance and durability, contributing to its potential application in dental restorations. Future research is needed to thoroughly investigate the bonding chemistry between Acacia nilotica and GIC, as well as to assess the extent of microleakage.
RESUMEN
Background Photobiomodulation techniques, particularly low-level laser therapy (LLLT), have gained traction due to their ability to accelerate osseointegration by stimulating cellular metabolism and promoting tissue healing. This study explores the effectiveness of LLLT around dental implants at various intervals after placement. Using resonance frequency analysis (RFA), the implant stability quotient (ISQ) was measured to assess implant stability. Methodology This split-mouth, randomized, single-blinded clinical trial included 20 participants undergoing dental implant placement. The test group received LLLT while the control group had no laser treatment. Implant stability was assessed using RFA at one, two, four, and twelve weeks post-implant placement. Statistical analysis involved descriptive statistics, repeated-measures analysis of variance (ANOVA), and t-tests. Results The repeated-measures ANOVA analysis showed significant differences in the ISQ values between the LLLT group and the control group at two weeks and three months post-implant placement. The LLLT group exhibited higher ISQ values, indicating greater implant stability and improved osseointegration compared to the control group. These findings suggest the potential benefits of LLLT in enhancing dental implant outcomes. Conclusions LLLT shows promise in improving dental implant outcomes, with enhanced stability and osseointegration. Further research is needed to validate these results and integrate LLLT into routine dental implant procedures.
RESUMEN
BACKGROUND: Glass ionomer cements are commonly utilized in dental restorations due to their biocompatibility, strong chemical bond with dental tissues, and ability to resist tooth decay. However, their effectiveness can be compromised by the presence of persistent cavity-causing microorganisms. Therefore, it is essential to consider incorporating antibacterial agents into these restorative materials. Swertia chirayita (S. chirayita) and Terminalia arjuna (T. arjuna) are well-known for their rich composition of phytochemicals that can potentially inhibit the growth of bacteria. Hence, the current research is focused on modifying glass ionomer cement with Chirayita and T. arjuna extracts to enhance its antibacterial properties. AIM: This research aims to determine the antimicrobial efficacy and compressive strength of glass ionomer cement modified with Chirayita and T. arjuna extracts. METHODOLOGY: Plant extracts were prepared from both Chirayita and T. arjuna. The powder and liquid components of conventional glass ionomer cement (GIC) were mixed, followed by adding these extracts at three different concentrations. To assess antimicrobial properties, typical strains of Streptococcus mutans and Lactobacillus were employed to test both the modified GIC and unmodified GIC (used as a control). For Chirayita and T. arjuna-modified GIC, minimum inhibitory concentration (MIC) assays were conducted at three different concentrations. MIC was assessed at various time intervals ranging from 1 to 4 hours for modified and unmodified groups. Moreover, compressive strength was measured using cylindrical molds. The highest force exerted at the point of specimen fracture was recorded to calculate the compressive strength values in megapascal (MPa). RESULTS: The antimicrobial efficiency of Chirata and T. arjuna-modified GIC was evaluated using a MIC assay, indicating a statistically significant enhancement in antimicrobial potency against S. mutans and Lactobacillus within the modified groups in contrast to the control group (p<0.05). However, there were no notable changes in compressive strength when comparing the control group to the modified groups (p>0.05). CONCLUSION: The antimicrobial effectiveness against S. mutans was observed to be greater in both T. arjuna and Chirayita-modified GIC. In the case of Lactobacillus, Chirayita-modified GIC exhibited more pronounced antimicrobial properties compared to T. arjuna. Importantly, both extracts did not alter the compressive strength of Conventional (unmodified) GIC. Hence, Chirayita-modified GIC appears to be a promising restorative material for combatting recurrent caries. Additional investigation is required to assess the material's stability over an extended period.
RESUMEN
AIM: The conventional technique of implant uncovery using a blade and scalpel is associated with various drawbacks, including profuse bleeding, soft-tissue trauma, delayed healing, and patient noncompliance. Therefore, there is a need to explore the alternative approaches that offer improved accuracy and time efficiency during the cover screw location at the second stage of recovery. This study aims to assess the accuracy and time efficiency of a novel technique that utilizes an apex locator in comparison to conventional locating techniques for implant uncovery. SETTINGS AND DESIGN: The study employed a simple randomized controlled trial with a sample size of 161. MATERIALS AND METHODS: The study employed apex locator (Woodpecker Woodpex III Gold 5th generation) in conjunction with a K-file (Mani k-file #10, 21 mm) for detecting the implant location. The accuracy of the novel technique was determined based on the values measured on the apex locator, with positive values indicating soft-tissue response and negative values indicating the cover screw (metal). The accuracy was cross-verified using radiovisiography (RVG). The clinician-based scoring was also done, considering RVG evaluation, amount of incision given, and ease of the procedure. The time required to locate the cover screw was recorded using a timer for both the novel technique and the conventional method. STATISTICAL ANALYSIS USED: All the recorded values were statistically analyzed using the independent t-test (P < 0.005) with the SPSS software (version 23). RESULTS: The results revealed a significant difference in terms of incision given, ease of treatment, and time taken for the procedure (P < 0.05), while the accuracy of the novel technique was not disturbed (P > 0.05). CONCLUSION: Based on the findings of this in vivo study, the use of an apex locator as an alternative to conventional methods for detecting cover screw location at the second stage of recovery is recommended. The novel technique demonstrated faster uncovering of implants without posing any risks to the surrounding tissues or implants.