Comparison of single and double pulse laser-induced breakdown spectroscopy for the detection of biomolecules tagged with photon-upconversion nanoparticles.

BACKGROUND: Laser-induced breakdown spectroscopy (LIBS) is a well-recognized analytical technique used for elemental analysis. This method is gaining considerable attention also in biological applications thanks to its ability for spatial mapping and elemental imaging. The implementation of LIBS in the biomedical field is based on the detection of metals or other elements that either naturally occur in the samples or are present artificially. The artificial implementation of nanoparticle labels (Tag-LIBS) enables the use of LIBS as a readout technique for immunochemical assays. However, one of the biggest challenges for LIBS to meet immunoassay readout standards is its sensitivity. RESULTS: This paper focuses on the improvement of LIBS sensitivity for the readout of nanoparticle-based immunoassays. First, the LIBS setup was optimized on photon-upconversion nanoparticle (UCNP) droplets deposited on the microtiter plate wells. Two collection optics systems were compared, with single pulse (SP) and collinear double pulse (DP) LIBS arrangements. By deploying the second laser pulse, the sensitivity was improved up to 30 times. The optimized SP and DP setups were then employed for the indirect detection of human serum albumin based on immunoassay with UCNP-based labels. Compared to our previous LIBS study, the detection limit was enhanced by two orders of magnitude, from 10 ng mL-1 to 0.29 ng mL-1. In addition, two other immunochemical methods were used for reference, based on the readout of upconversion luminescence of UCNPs and absorbance measurement with enzyme labels. Finally, the selectivity of the assay was tested and the practical potential of Tag-LIBS was demonstrated by the successful analysis of urine samples. SIGNIFICANCE AND NOVELTY: In this work, we improved the sensitivity of the Tag-LIBS method by combining new labels based on UCNPs with the improved collection optics and collinear DP configuration. In the instrumental setup optimization, the DP LIBS showed better sensitivity and signal-to-noise ratio than SP. The optimizations allowed the LIBS readout to surpass the sensitivity of enzyme immunoassay, approaching the qualities of upconversion luminescence readout, which is nowadays a state-of-the-art readout technique.

Influence of Label and Solid Support on the Performance of Heterogeneous Immunoassays.

Conventional immunochemical methods used in clinical analysis are often not sensitive enough for early-stage diagnosis, resulting in the need for novel assay formats. Here, we provide a detailed comparison of the effect of different labels and solid supports on the performance of heterogeneous immunoassays. When comparing three types of streptavidin-modified labels─horseradish peroxidase, carboxyfluorescein, and photon-upconversion nanoparticles (UCNPs)─UCNPs led to the most sensitive and robust detection of the cancer biomarker prostate-specific antigen. Additionally, we compared the immunoassay formats based on conventional microtiter plates and magnetic microbeads (MBs). In both cases, the highest signal-to-background ratios and the lowest limits of detection (LODs) were obtained by using the UCNP labels. The MB-based upconversion-linked immunosorbent assay carried out with a preconcentration step provided the lowest LOD of 0.46 pg/mL in serum. The results demonstrate that the use of UCNPs and MBs can significantly improve the sensitivity and working range of heterogeneous immunoassays for biomarker detection.

PMVEMA-coated upconverting nanoparticles for upconversion-linked immunoassay of cardiac troponin.

Surface engineering of upconverting nanoparticles (UCNPs) is crucial for their bioanalytical applications. Here, an antibody specific to cardiac troponin I (cTnI), an important biomarker for acute myocardial infection, was covalently immobilized on the surface of UCNPs to prepare a label for the detection of cTnI biomarker in an upconversion-linked immunoassay (ULISA). Core-shell UCNPs (NaYF4:Yb,Tm@NaYF4) were first coated with poly(methyl vinyl ether-alt-maleic acid) (PMVEMA) and then conjugated to antibodies. The morphology (size and uniformity), hydrodynamic diameter, chemical composition, and amount of coating on the of UCNPs, as well as their upconversion luminescence, colloidal stability, and leaching of Y3+ ions into the surrounding media, were determined. The developed ULISA allowed reaching a limit of detection (LOD) of 0.13 ng/ml and 0.25 ng/ml of cTnI in plasma and serum, respectively, which represents 12- and 2-fold improvement to conventional enzyme-linked immunosorbent based on the same immunoreagents.

Stability of oxygen-rich plasma-polymerized coatings in aqueous environment.

In this work, we report on the stability of oxygen-rich plasma-polymerized (pp) films in an aqueous environment. The pp films were deposited via atmospheric-pressure plasma jet treatment of polymerizable organic liquids. The monomers used for the plasma-assisted polymerization were tetrahydrofurfuryl methacrylate, 1,2,4-trivinylcyclohexane, and mixtures thereof. The pp films were deposited at different plasma input powers ranging from 3 to 7 W. The stability of the obtained pp films was studied upon long-time storage in pure water and in buffer solutions of pHs 4, 7, and 10. After 24 h of storage of the pp films in de-ionized water, all of the studied pp films experienced thickness losses along with the formation of various ringlike structures at their surface, whereas Fourier transformed infrared (FT-IR) analysis showed no changes in their chemical composition. The pp films stored in pH 10 were completely delaminated from the substrate surface, while the pp films stored for 24 h in pH 4 showed swelling behavior, partial delamination, and the formation of wrinkles at the coatings' surface. The pp films stored for 24 h in pH 7 experienced minor thickness losses and formation of wrinkles at their surface. FT-IR analysis of the pp films stored in buffer solutions of pH 4 and pH 7 showed a decrease of C=O and an increase of O-H stretching signals in all of the cases. The observed chemical changes corresponded to the hydrolysis of esters presented in the pp films' structure.

Functional Plasma Polymerized Surfaces for Biosensing.

The capabilities of biosensors for fast, economic, and user-friendly analysis of complex samples has led to the exploitation of analytical devices for detection, quantification, and monitoring of specific chemical species for various applications. For a sufficiently high surface reactivity toward the adopted bioreceptors, a thin functional layer is required to enable coupling of the target biomolecules and to provide good stability in the presence of a sample matrix. In this work, the generation of water-stable oxygen-rich plasma polymerized (pp) films deposited by atmospheric-pressure jet plasma for reliable immobilization of biomolecules is presented. Three types of pp films were developed and characterized. All of the obtained pp films were successfully used as a matrix layer in the SPR immunosensors, which provided excellent level of sensitivity, stability, and regenerability. The achieved results show that atmospheric pressure plasma-induced polymerization is a powerful alternative method for the preparation of matrix layers for a wide range of applications in the biological field.

Maleic anhydride and acetylene plasma copolymer surfaces for SPR immunosensing.

We report on the successful application of carboxyl-rich plasma polymerized (PP) films as a matrix layer for bioreceptor immobilization in surface plasmon resonance (SPR) immunosensing. Composition and chemical properties of the carboxyl-rich PP films deposited from a mixture of maleic anhydride and acetylene were investigated. Changes in the films stored in air, water, and buffer were studied and the involved chemical changes were described. Performance in SPR immunosensing was evaluated on interactions of human serum albumin (HSA) with a specific monoclonal antibody. The comparison with the mixed self-assembled monolayer of mercaptoundecanoic acid and mercaptohexanol (MUA/MCH) and one of the most widely used surfaces for SPR, the 2D and 3D carboxymethylated dextran (CMD), was presented to show the efficacy of plasma polymerized matrix layers for biosensing. The PP film-based SPR immunosensor provided a similar detection limit of HSA (100 ng/mL) as MUA/MCH- (100 ng/mL) and 3D CMD (50 ng/mL)-based sensors. However, the response levels were about twice higher in case of the PP film-based immunosensor than in case of MUA/MCH-based alternative. The PP film surfaces had similar binding capacity towards antibody as the 3D CMD layers. The response of PP film-based sensor towards HSA was comparable to 3D CMD-based sensor up to 2.5 µg/mL. For the higher concentrations (> 10 µg/mL), the response of PP film-based immunosensor was lower due to inaccessibility of active sites of the immobilized antibody inside the flat PP film surface. We have demonstrated that due to its high stability and cost-effective straightforward preparation, the carboxyl-rich PP films represent an efficient alternative to self-assembled monolayers (SAM) and dextran-based layers in label-free immunosensing. Graphical abstract.