Changes in facial appearance alter one's sensitivity not only to the self but also to the outside world.

Introduction: Changes in facial appearance due to orthognathic surgery are known to improve a patient's postoperative quality of life, however, potential changes in cognitive function are unknown. This study examined the effects of changes in facial appearance due to orthognathic surgery on the sensitivity to self and to outside objects in patients with jaw deformities. Methods: Patients with jaw deformities (n = 22) and healthy controls (n = 30) were tested at 3 months preoperatively, at 1 month preoperatively, and at 1 month postoperatively to assess their impression of objects (positive, negative, and neutral pictures) and their evaluation of their own face and body. Results: The results showed that changes in facial appearance improved self-evaluation and increased their sensitivity to emotional objects even when the objects were identical. Furthermore, the improving rating for own face was associated with the sensitivity for objects. Discussion: The changes in facial appearance in patients may have helped to clear the sensitivity to these emotional objects. These findings may provide a new indicator of efficacy in orthognathic surgery.

Three-dimensional assessment of the nasopharyngeal airway in Down syndrome during the mixed dentition period: a case-control study.

OBJECTIVE: In this retrospective case-control study, we aimed to evaluate the nasopharyngeal airway volume of children with Down syndrome (DS) and compare the results with those of control participants well matched for sex and age. MATERIALS AND METHODS: Fifteen children with DS (mean age = 9.43 ± 0.38 years; 8 boys, 7 girls) and 15 control participants (mean age = 9.51 ± 0.40 years; 8 boys, 7 girls) were enrolled. The nasopharyngeal airway volume and the cross-sectional morphology were measured with cone-beam computed tomography taken for orthodontic treatment. All measurements were assessed by analysis of covariance (ANCOVA) using Bonferroni post hoc pairwise comparison tests. Covariates were body height and body weight, and the ANB angle and the mandibular plane angle. Significance was set at P < .0019. RESULTS: Nasal airway, superior airway, and total airway volumes of DS participants were significantly smaller than those of the control participants in ANCOVA results adjusted for ANB angle and mandibular plane angle (P = .000). In ANCOVA results adjusted for body height and body weight, no statistically significant differences in the volume measurements were found. CONCLUSION: The results indicate that the nasopharyngeal airway volume differs between children with and without DS and that the airway volume tends to be smaller in DS children than in children without DS.

Maxillary Protrusion with Severe Overjet Treated by Maxillary Anterior Alveolar Osteotomy.

In addition to affecting oral functions such as temporomandibular joint function, mastication, and speech, malocclusion caused by skeletal maxillary prognathism also entails sociopsychological implications. Surgical orthodontic treatment to improve occlusion and oral function and to correct esthetic disharmony is important to improve patients' quality of life. We report the case of a 32-year-old woman who visited our hospital with a chief complaint of proclined upper front teeth. Clinical examination revealed maxillary overgrowth and severe labial inclination of the maxillary incisors with palatal gingival recession. The incisal protrusion was corrected with a maxillary anterior alveolar osteotomy-a surgical orthodontic method that could improve the overbite without causing excessive lingual inclination, while also minimizing orthodontic movement of the maxillary anterior teeth. This treatment is generally indicated in cases of maxillary prognathism with a relatively stable occlusal relationship in the molar region. As a result of the treatment, the patient's chief complaint improved and a long-term functional occlusion was achieved. This paper outlines the pre- and posttreatment skeletal and occlusal changes.

The Development of a Measuring System for Intraoral SpO2.

Blood oxygen saturation (SpO2) is an essential indicator of a patient's general condition. However, conventional measurement methods have some issues such as time delay and interference by ambient light. Improved measurement methods must be developed, and there are no reports on intraoral measurements of SpO2 using wearable devices. Therefore, we aimed to establish an intraoral SpO2 measurement method for the first time. Twelve healthy adults participated in this study. The following steps were taken: (1) to identify the optimal measurement location, mid-perfusion index (PI) values were measured at six places on the mucosa of the maxilla, (2) to validate the optimal measurement pressure, PI values were obtained at different pressures, and (3) using the proposed mouthpiece device, SpO2 values in the oral cavity and on the finger were analyzed during breath-holding. The highest PI values were observed in the palatal gingiva of the maxillary canine teeth, with high PI values at pressures ranging from 0.3 to 0.8 N. In addition, changes in SpO2 were detected approximately 7 s faster in the oral cavity than those on the finger, which is attributed to their proximity to the heart. This study demonstrates the advantage of the oral cavity for acquiring biological information using a novel device.

Lactate-induced histone lactylation by p300 promotes osteoblast differentiation.

Lactate, which is synthesized as an end product by lactate dehydrogenase A (LDHA) from pyruvate during anaerobic glycolysis, has attracted attention for its energy metabolism and oxidant effects. A novel histone modification-mediated gene regulation mechanism termed lactylation by lactate was recently discovered. The present study examined the involvement of histone lactylation in undifferentiated cells that underwent differentiation into osteoblasts. C2C12 cells cultured in medium with a high glucose content (4500 mg/L) showed increases in marker genes (Runx2, Sp7, Tnap) indicating BMP-2-induced osteoblast differentiation and ALP staining activity, as well as histone lactylation as compared to those cultured in medium with a low glucose content (900 mg/L). Furthermore, C2C12 cells stimulated with the LDH inhibitor oxamate had reduced levels of BMP-2-induced osteoblast differentiation and histone lactylation, while addition of lactate to C2C12 cells cultured in low glucose medium resulted in partial restoration of osteoblast differentiation and histone lactylation. These results indicate that lactate synthesized by LDHA during glucose metabolism is important for osteoblast differentiation of C2C12 cells induced by BMP-2. Additionally, silencing of p300, a possible modifier of histone lactylation, also inhibited osteoblast differentiation and reduced histone lactylation. Together, these findings suggest a role of histone lactylation in promotion of undifferentiated cells to undergo differentiation into osteoblasts.

Optical imaging of neurons related to fictive swallowing using GCaMP6f in an arterially perfused rat preparation.

OBJECTIVE: It is difficult to comprehensively study the activity patterns and distribution of neurons in the brainstem that control the act of swallowing, as they are located deep in the brain. In this study, we aimed to evaluate the usefulness of calcium imaging using GCaMP6f in arterially perfused preparations to study the activity of swallowing-related neurons in the brainstem. METHODS: Arterially perfused rat preparations were prepared 3-4 weeks after the injection of a neuron-specific virus expressing GCaMP6f. Fictive swallowing was induced by repetitive electrical stimulation of the superior laryngeal nerve (SLN). Simultaneously, the activity of GCaMP6f-expressing neurons in the dorsal brainstem, between 0.1 and 4.8 mm rostral to the obex, was assessed by changes in the intracellular calcium concentration using confocal laser microscopy. RESULTS: Neurons responding to stimulation of the SLN included swallowing-related neurons (48%), which showed an increase in fluorescence intensity at the time of swallowing bursts in the cervical vagus nerve, and stimulation-related neurons (52%), which showed an increase in fluorescence intensity through stimulation, regardless of the swallowing bursts. Despite a broad search area, swallowing-related neurons were localized exclusively in and around the solitary nucleus. In contrast, most stimulation-related neurons were located in the brainstem reticular formation, which is more rostral than the solitary nucleus. CONCLUSIONS: Calcium imaging using GCaMP in arterially perfused rat preparations is useful for an efficient search of the activity pattern and distribution of neurons located in a wide area of the brainstem.

Cathepsin K degrades osteoprotegerin to promote osteoclastogenesis in vitro.

Osteoblasts produce the receptor activator of nuclear factor-kappa B ligand (RANKL) and osteoprotegerin, the inducer and the suppressor of osteoclast differentiation and activation. We previously proposed that the degradation of osteoprotegerin by lysine-specific gingipain of Porphyromonas gingivalis and neutrophil elastase is one of the mechanisms of bone resorption associated with infection and inflammation. In the present study, we found that cathepsin K (CTSK) also degraded osteoprotegerin in an acidic milieu and the buffer with a pH of 7.4. The 37 k fragment of osteoprotegerin produced by the reaction with CTSK was further degraded into low molecular weight fragments, including a 13 k fragment, depending on the reaction time. The N-terminal amino acid sequence of the 37 k fragment matched that of the intact osteoprotegerin, indicating that CTSK preferentially hydrolyzes the death domain-like region of osteoprotegerin, not its RANKL-binding region. The 13 k fragment of osteoprotegerin was the C-terminal 13 k portion within the RANKL-binding region of the 37 k fragment. Finally, CTSK restored RANKL-dependent osteoclast differentiation that was suppressed by the addition of osteoprotegerin. Collectively, CTSK is a possible positive regulator of osteoclastogenesis.

Transcriptome profiles associated with human periodontal ligament differentiation.

OBJECTIVES: Tissue differentiation is regulated by transcription factors. This study aimed to identify candidate transcription factors that induce periodontal ligament (PDL) cell differentiation in human pluripotent stem cells (hPSCs). METHODS: Human PDL tissues were scraped from the root surfaces of extracted teeth for orthodontic treatment and cultured using the explant culture method. We used RNA-seq to generate gene expression profiles of third-passage PDL cells and compared them with those of undifferentiated human induced pluripotent stem cells (hiPSCs) and human embryonic stem cell (hESC)-derived neural crest (NC) cells (publicly available data). RESULTS: Primary cultured PDL cells exhibited a spindle-shaped fibroblast-like appearance and the gene expression of several PDL cell-specific markers. The gene expression profiles of PDL cells were relatively similar to those of hESC-derived NC cells but not those of undifferentiated hiPSCs. Thirty-seven transcription factors were identified as upregulated genes in PDL cells. Pathway analysis showed that differentially expressed genes were enriched in several functional groups and pathways, including the SMAD 2/3 nuclear pathway. CONCLUSIONS: We identified 37 upregulated transcription genes in primary cultured PDL cells compared with hESC-derived NC cells. Regulating these genes and the SMAD signaling pathway may be promising ways to induce PDL cells from hPSC-derived NC cells.

Comparison of Maxillofacial Morphology Between Modified Furlow's and Modified two-Flap Palatoplasty in Orofacial Clefts During the Primary Dentition Period.

OBJECTIVE: To assess the effect of two palatoplasty procedures, modified Furlow's palatoplasty (F procedure) and modified two-flap palatoplasty (T procedure), on the maxillofacial morphology of unilateral cleft lip and palate (UCLP) and bilateral cleft lip and palate (BCLP) during the primary dentition period. DESIGN: Retrospective cohort study. SETTING: Department of Orthodontics, School of Dentistry, Showa University. PARTICIPANTS: We enrolled 106 pediatric patients (63 boys, 43 girls; aged 4.43 ± 0.34 years) with non-syndromic orofacial clefts who underwent cheiloplasty and palatoplasty. INTERVENTIONS: Patients were divided into four groups according to cleft type (BCLP or UCLP) and palatoplasty procedure type (F or T procedure). MAIN OUTCOME MEASURES: Maxillofacial morphology was assessed by examining parameters on lateral cephalograms. RESULTS: Multiple comparisons revealed significant differences among N-A, N-ANS, and ANS-PNS distances and SNA and ANB angles among the groups. There were significant differences in N-A, N-ANS, ANS-PNS, SNA, and SNB among the UCLP and BCLP groups. The calculated effect sizes were all within 0.3-0.5. The statistical power was as follows: N-A, 86.41%; N-ANS, 79.77%; ANS-PNS, 97.49%; SNA, 96.88%; and ANB, 99.25%. CONCLUSIONS: Although UCLP and BCLP both exhibited differences in craniofacial distances and angles, the procedure type (either F or T procedure) had no significant effect on the maxillofacial morphology (as determined by lateral cephalograms). However, to rule out additional bias, patient-specific factors should be considered that may be affected by maxillofacial development when deciding surgical approaches.

A New Intraoral Six-Degrees-of-Freedom Jaw Movement Tracking Method Using Magnetic Fingerprints.

We proposed a novel jaw movement tracking method that can measure in six degrees of freedom. The magnetic field generated by a permanent magnet paired with a small, low-power-consumption Hall effect magnetic sensor is used to estimate the relative distance between two objects-in this instance, the lower and upper jaws. By installing a microelectromechanical system (MEMS) orientation sensor in the device, we developed a mouthpiece-type sensing device that can measure voluntary mandibular movements in three-dimensional orientation and position. An evaluation of individuals wearing this device demonstrated its ability to measure mandibular movement with an accuracy of approximately 3 mm. Using the movement recording feature with six degrees of freedom also enabled the evaluation of an individual's jaw movements over time in three dimensions. In this method, all sensors are built onto the mouthpiece and the sensing is completed in the oral cavity. It does not require the fixation of a large-scale device to the head or of a jig to the teeth, unlike existing mandibular movement tracking devices. These novel features are expected to increase the accessibility of routine measurements of natural jaw movement, unrestricted by an individual's physiological movement and posture.

Measurement of elastic strain recovery in an orthodontic aligner as a driving force for orthodontic treatment.

Orthodontic aligners undergo deformation during installation, producing an unexpected component of elastic restoring force that causes unintended changes in the dentition. The aim of this study was to investigate the relationship between strain and elastic recovery of the aligner. We distinguished the contributions to aligner deformation due to molding and installation by measuring the thickness distribution of an aligner after molding using micro-CT and tracking changes in grid patterns drawn on the sheet used to fabricate the aligner. The aligner was installed on a device that simulated canine movement. Although canine strain was quite strong around the cusp, and in premolar, it was observed mainly in their centers. Furthermore, after molding, thickness distribution of the aligner was found. But, it is no clear relationship between the thickness distribution and the strain distribution. Our method of analysis can help improve aligner design and establish molding method to deliver optimal orthodontic treatment.

Visualization of orthodontic forces generated by aligner-type appliances.

Recently, the number of patients who request esthetically pleasing aligner-type orthodontic appliances (referred to as aligners) has been increasing. However, the orthodontic forces generated by these aligners are still unknown. This study aimed to verify whether the orthodontic force in aligners can be estimated by measuring near infrared 2D birefringence, and to visualize the orthodontic force. We measured the mechanical and photoelastic properties of transparent orthodontic thermoplastic specimens to correlate the optical retardation with the applied load. The results confirmed equivalence between the mechanical properties and the photoelasticity. In addition, the 2D retardation distribution that occurred when stress was applied to the sample was mapped and visualized. This indicates that it is possible to estimate and visualize the orthodontic force using the retardation obtained by near infrared 2D birefringence measurement.

Mechanical analysis of factors affecting clear aligner removability.

It is difficult to control corrective forces in orthodontic treatment with clear aligners. The grip of aligners on teeth is important to ensure accurate corrective forces from aligners. This study aimed to measure the gripping force of aligners under various conditions to clarify factors that influence it. We created aligners with different attachment morphologies and placement sites and different margin lengths. We developed a device to measure the mechanics involved in the removal of these aligners. The gripping force was evaluated at five different aligner removal sites on the teeth. We found that the gripping force of the aligner was the weakest on the lingual side of the first molar and strongest on the labial side of the central incisors and that the attachment morphology and placement sites affected the gripping force of aligners.

Neural crest-derived cells possess differentiation potential to keratinocytes in the process of wound healing.

Neural crest-derived cells (NCDCs), which exist as neural crest cells during the fetal stage and differentiate into palate cells, also exist in adult palate tissues, though with unknown roles. In the present study, NCDCs were labeled with EGFP derived from P0-Cre/CAG-CAT-EGFP (P0-EGFP) double transgenic mice, then their function in palate mucosa wound healing was analyzed. As a palate wound healing model, left-side palate mucosa of P0-EGFP mice was resected, and stem cell markers and keratinocyte markers were detected in healed areas. NCDCs were extracted from normal palate mucosa and precultured with stem cell media for 14 days, then were differentiated into keratinocytes or osteoblasts to analyze pluripotency. The wound healing process started with marginal mucosal regeneration on day two and the entire wound area was lined by regenerated mucosa with EGFP-positive cells (NCDCs) on day 28. EGFP-positive cells comprised approximately 60% of cells in healed oral mucosa, and 65% of those expressed stem cell markers (Sca-1+, PDGFRα+) and 30% expressed a keratinocyte marker (CK13+). In tests of cultured palate mucosa cells, approximately 70% of EGFP-positive cells expressed stem cell markers (Sca-1+, PDGFRα+). Furthermore, under differentiation inducing conditions, cultured EGFP-positive cells were successfully induced to differentiate into keratinocytes and osteoblasts. We concluded that NCDCs exist in adult palate tissues as stem cells and have potential to differentiate into various cell types during the wound healing process.

Longitudinal Follow-Up of Facial Growth of Patients With Unilateral Cleft Lip and Palate Following Modified Veau-Wardill-Kilner Palatoplasty.

OBJECTIVE: To evaluate facial growth after modified Veau-Wardill-Kilner/pushback (PB) palatoplasty from childhood to adulthood in patients with unilateral cleft lip and palate (UCLP). DESIGN: Retrospective longitudinal study. SETTING: Single center. PATIENTS: Sixty-two (29 males and 33 females) consecutive patients with nonsyndromic UCLP. INTERVENTIONS: Pushback palatoplasty and subsequent cleft palate treatment. MAIN OUTCOME MEASURES: Lateral and posterior-anterior cephalograms were taken at 3 different phases: phase 1 (before first-stage orthodontic treatment; N = 58; average age, 4.9 ± 1.1 years), phase 2 (before second-stage orthodontic treatment; N = 58; 15.9 ± 1.1 years), and phase 3 (after orthodontic retention; N = 51; 22.1 ± 3.2 years). RESULTS: The majority of patients had skeletal class III morphology in all 3 phases due to retrognathic maxilla. Maxillary growth did not improve in phase 2 despite first-stage orthodontic treatment in phase 1. Maxillary morphology improved in phase 3 but retardation occurred, although 77.42% of patients received orthognathic surgery during second-stage orthodontic treatment. Mandibular growth was slightly reduced in phases 1 and 2 and the mandible remained retrognathic in phase 3, following mandibular setback orthognathic surgery. The horizontal occlusal cant was slightly upward and toward the cleft side with respect to the reference plane, and the upper midline was deviated to the cleft side in phases 1 and 3. CONCLUSIONS: Patients with UCLP who undergo phased PB palatoplasty, orthodontic treatment, and orthognathic surgeries do not maintain skeletal class I facial morphology.

Three-Dimensional Assessment of Craniofacial Features in Patients With Down Syndrome During the Mixed Dentition Period: A Case-Control Study.

OBJECTIVES: Down syndrome (DS) is a common congenital chromosomal disorder related to trisomy 21. Lateral cephalometric radiography studies have shown that patients with DS have characteristic craniofacial morphology; however, no 3-dimensional analysis studies have been performed to investigate the craniofacial features, including volumetric aspects, of patients with DS. The present study was performed to evaluate the craniofacial features, including volumetric aspects, of patients with DS and to compare these findings with control participants using cone beam computed tomography (CBCT). MATERIALS AND METHODS: The study sample consisted of 12 patients with DS and 12 control participants. All participants were examined by means of CBCT; the resulting images were used for evaluation of maxillary and mandibular volume, cranial base, and craniofacial measurements. Differences between patients with DS and control participants were statistically analyzed using Student t test. RESULTS: Compared to control participants, patients with DS exhibited statistically significant reductions in maxillary and mandibular volumes. Both sagittal and axial cranial base linear measurements were shorter in patients with DS than in control participants. In contrast, the cranial base angle was enhanced in patients with DS, compared with control participants. Moreover, condylion (Co)-gnathion, anterior nasal spine-menton, and Co-subspinale (point A) measurements were shorter in patients with DS than in control participants; the sella-nasion-mandibular plane angle was significantly reduced in patients with DS, compared with control participants. CONCLUSION: Our results suggest that patients with DS have distinct skeletal volume and craniofacial morphology features, relative to individuals without DS.

Development of a new evaluation method for orthodontic forces generated in individual patients.

Numerous experimental studies have examined how much orthodontic force is needed to move teeth more smoothly; however, no reports have examined this clinically in individual, living subjects. We aimed to develop a method for quantifying the force exerted on individual teeth by an orthodontic wire to measure how loads placed on crowded teeth change dynamically over time. Accordingly, we fabricated a series of dental casts of patients undergoing orthodontic treatment (using optical impressions and a three-dimensional printer), fitted these models with nickel-titanium wire, and subjected them to bending load tests. During leveling, nickel-titanium wire is generally considered to exert a weak force due to its low elastic modulus, with a weak orthodontic force applied over a long period of time due to its superelasticity; however, we found that the actual energy exerted by nickel-titanium wire is also largely affected by other factors (e.g., amount of crowding).

Neural crest-derived cells in nasal conchae of adult mice contribute to bone regeneration.

Neural crest-derived cells (NCDCs), a class of adult stem cells not restricted to embryonic tissues, are attractive tissue regenerative therapy candidates because of their ease of isolation, self-renewing properties, and multipotency. Although adult NCDCs can undergo osteogenic differentiation in vitro, whether they induce bone formation in vivo remains unclear. Previously, our group reported findings showing high amounts of NCDCs scattered throughout nasal concha tissues of adult mice. In the present study, NCDCs in nasal conchae labeled with enhanced green fluorescent protein (EGFP) were collected from adult P0-Cre/CAG-CAT-EGFP double transgenic mice, then cultured in serum-free medium to increase the number. Subsequently, NCDCs were harvested and suspended in type I atelocollagen gel, then an atelocollagen sponge was used as a scaffold for the cell suspension. Atelocollagen scaffolds with NCDCs were placed on bone defects created in a mouse calvarial bone defect model. Over the ensuing 12 weeks, micro-CT and histological analysis findings showed that mice with scaffolds containing NCDCs had slightly greater bone formation as compared to those with a scaffold alone. Furthermore, Raman spectroscopy revealed spectral properties of bone in mice that received scaffolds with NCDCs similar to those of native calvarial bone. Bone regeneration is important not only for gaining bone mass but also chemical properties. These results are the first to show the validity of biomolecule-free adult nasal concha-derived NCDCs for bone regeneration, including the chemical properties of regenerated bone tissue.

Verification of mechanical load generated by functional orthodontic appliances.

Functional appliances are widely used for promoting mandibular growth by utilizing a construction bite position. We aimed to measure the mechanical load generated by movement of functional appliances and determine the factors influencing this load. Thirteen patients aged 8-12 years were selected for the study, and the load was measured using a previously developed measurement device. To investigate the factors affecting the load, the temporomandibular joint morphology and muscles related to the mandible were examined using cone-beam computed tomography. The standard regression coefficients of the factors affecting the load per millimeter of movement distance were 0.64 and 0.66 for (a) the inclination of the articular eminence and (b) the angle between occlusal plane and posterior temporalis, respectively. Measurement of the occlusal plane to the posterior temporalis and the inclination of the articular eminence were significantly different (p < 0.05). The angle of inclination of the articular eminence emerged as a strong influencing factor. Similarly, the influence of measurements from the occlusal plane to the posterior temporalis was considerable since the posterior temporalis muscle is the most active when the mandible is extended forward. We also found a possible relationship between the occlusal force and load at the construction bite position. To our knowledge, this is the first study to determine the actual load associated with the angle of the temporalis muscle to the occlusal plane, inclination angle of the articular eminence, angle between the occlusal plane and the Frankfort plane, and the angle between the geniohyoid muscle and the occlusal plane. Therefore, mechanical considerations need to be more accurate to facilitate safe orthodontic treatment.

Three-dimensional evaluation of mandibular volume in patients with cleft lip and palate during the deciduous dentition period.

OBJECTIVES: To examine the relationship between mandibular volume and craniofacial morphology in patients with cleft lip and palate using cone beam computed tomography (CBCT) and to compare these findings with control (noncleft) patients undergoing CBCT for other purposes during the deciduous dentition period. MATERIALS AND METHODS: Eighty-four patients were categorized into the unilateral cleft lip and alveolus (UCLA) group (n = 25; mean age, 4.60 ± 0.40 years), unilateral cleft lip and palate (UCLP) group (n = 23; mean age, 4.52 ± 0.39 years), bilateral cleft lip and palate (BCLP) group (n = 22; mean age, 4.54 ± 0.37 years), and control group without cleft (n = 14; mean age, 5.19 ± 0.52 years). Mandibular volume and craniofacial cephalometric measurements were obtained using CBCT. All measurements were assessed by analysis of covariance (ANCOVA) using Bonferroni post hoc pairwise comparison tests. RESULTS: ANCOVA revealed no statistically significant differences in mandibular volume among the groups. SNA° and ANB° were significantly larger in the UCLA and BCLP groups than in the control group. SN-MP° was smallest in the UCLA group. Co-A in the UCLP group was shorter than in the UCLA and BCLP groups. Go-Gn was shortest in the UCLP and BCLP groups compared with the control group. CONCLUSIONS: Three-dimensional evaluation of craniofacial morphology using CBCT can provide valuable information on malocclusion and other dentoskeletal problems among patients with CLP.