Multifunctional Stimuli-Responsive Cellulose Nanocrystals via Dual Surface Modification with Genetically Engineered Elastin-Like Polypeptides and Poly(acrylic acid).

Cellulose nanocrystals (CNCs) are promising candidates for a myriad of applications; however, successful utilization of CNCs requires balanced and multifunctional properties, which require ever more applied concepts for supramolecular tailoring. We present here a facile and straightforward route to generate dual functional CNCs using poly(acrylic acid) (PAA) and biosynthetic elastin-like polypeptides (ELPs). We utilize thiol-maleimide chemistry and SI-ATRP to harvest the temperature responsiveness of ELPs and pH sensitivity of PAA to confer multifunctionality to CNCs. Cryo-TEM and light microscopy are used to exhibit reversible temperature response, while atomic force microscopy (AFM) provides detailed information on the particle morphology. The approach is tunable and allows variation of the modifying molecules, inspiring supramolecular engineering beyond the currently presented motifs. The surge of genetically engineered peptides adds further possibilities for future exploitation of the potential of cellulose nanomaterials.

Photoluminescent Hybrids of Cellulose Nanocrystals and Carbon Quantum Dots as Cytocompatible Probes for in Vitro Bioimaging.

We present an approach to construct biocompatible and photoluminescent hybrid materials comprised of carbon quantum dots (CQDs) and TEMPO-oxidized cellulose nanocrystals (TO-CNCs). First, the amino-functionalized carbon quantum dots (NH2-CQDs) were synthesized using a simple microwave method, and the TO-CNCs were prepared by hydrochloric acid (HCl) hydrolysis followed by TEMPO-mediated oxidation. The conjugation of NH2-CQDs and TO-CNCs was conducted via carbodiimide-assisted coupling chemistry. The synthesized TO-CNC@CQD hybrid nanomaterials were characterized using X-ray photoelectron spectroscopy, cryo-transmittance electron microscopy, confocal microscopy, and fluorescence spectroscopy. Finally, the interactions of TO-CNC@CQD hybrids with HeLa and RAW 264.7 macrophage cells were investigated in vitro. Cell viability tests suggest the surface conjugation with NH2-CQDs not only improved the cytocompatibility of TO-CNCs, but also enhanced their cellular association and internalization on both HeLa and RAW 264.7 cells after 4 and 24 h incubation.

Photoantimicrobial Biohybrids by Supramolecular Immobilization of Cationic Phthalocyanines onto Cellulose Nanocrystals.

The development of photoactive and biocompatible nanostructures is a highly desirable goal to address the current threat of antibiotic resistance. Here, we describe a novel supramolecular biohybrid nanostructure based on the non-covalent immobilization of cationic zinc phthalocyanine (ZnPc) derivatives onto unmodified cellulose nanocrystals (CNC), following an easy and straightforward protocol, in which binding is driven by electrostatic interactions. These non-covalent biohybrids show strong photodynamic activity against S. aureus and E. coli, representative examples of Gram-positive and Gram-negative bacteria, respectively, and C. albicans, a representative opportunistic fungal pathogen, outperforming the free ZnPc counterparts and related nanosystems in which the photosensitizer is covalently linked to the CNC surface.

Degradation and Crystallization of Cellulose in Hydrogen Chloride Vapor for High-Yield Isolation of Cellulose Nanocrystals.

Despite the structural, load-bearing role of cellulose in the plant kingdom, countless efforts have been devoted to degrading this recalcitrant polysaccharide, particularly in the context of biofuels and renewable nanomaterials. Herein, we show how the exposure of plant-based fibers to HCl vapor results in rapid degradation with simultaneous crystallization. Because of the unchanged sample texture and the lack of mass transfer out of the substrate in the gas/solid system, the changes in the crystallinity could be reliably monitored. Furthermore, we describe the preparation of cellulose nanocrystals in high yields and with minimal water consumption. The study serves as a starting point for the solid-state tuning of the supramolecular properties of morphologically heterogeneous biological materials.

Hydrogen bonding asymmetric star-shape derivative of bile acid leads to supramolecular fibrillar aggregates that wrap into micrometer spheres.

We report that star-shaped molecules with cholic acid cores asymmetrically grafted by low molecular weight polymers with hydrogen bonding end-groups undergo aggregation to nanofibers, which subsequently wrap into micrometer spherical aggregates with low density cores. Therein the facially amphiphilic cholic acid (CA) is functionalized by four flexible allyl glycidyl ether (AGE) side chains, which are terminated with hydrogen bonding 2-ureido-4[1H]pyrimidinone (UPy) end-groups as connected by hexyl spacers, denoted as CA(AGE6-C6H12-UPy)4. This wedge-shaped molecule is expected to allow the formation of a rich variety of solvent-dependent structures due to the complex interplay of interactions, enabled by its polar/nonpolar surface-active structure, the hydrophobicity of the CA in aqueous medium, and the possibility to control hydrogen bonding between UPy molecules by solvent selection. In DMSO, the surfactant-like CA(AGE6-C6H12-UPy)4 self-assembles into nanometer scale micelles, as expected due to its nonpolar CA apexes, solubilized AGE6-C6H12-UPy chains, and suppressed mutual hydrogen bonds between the UPys. Dialysis in water leads to nanofibers with lateral dimensions of 20-50 nm. This is explained by promoted aggregation as the hydrogen bonds between UPy molecules start to become activated, the reduced solvent dispersibility of the AGE-chains, and the hydrophobicity of CA. Finally, in pure water the nanofibers wrap into micrometer spheres having low density cores. In this case, strong complementary hydrogen bonds between UPy molecules of different molecules can form, thus promoting lateral interactions between the nanofibers, as allowed by the hydrophobic hexyl spacers. The wrapping is illustrated by transmission electron microscopy tomographic 3D reconstructions. More generally, we foresee hierarchically structured matter bridging the length scales from molecular to micrometer scale by sequentially triggering supramolecular interactions.

Noncovalent Dispersion and Functionalization of Cellulose Nanocrystals with Proteins and Polysaccharides.

Native cellulose nanocrystals (CNCs) are valuable high quality materials with potential for many applications including the manufacture of high performance materials. In this work, a relatively effortless procedure was introduced for the production of CNCs, which gives a nearly 100% yield of crystalline cellulose. However, the processing of the native CNCs is hindered by the difficulty in dispersing them in water due to the absence of surface charges. To overcome these difficulties, we have developed a one-step procedure for dispersion and functionalization of CNCs with tailored cellulose binding proteins. The process is also applicable for polysaccharides. The tailored cellulose binding proteins are very efficient for the dispersion of CNCs due to the selective interaction with cellulose, and only small fraction of proteins (5-10 wt %, corresponds to about 3 µmol g(-1)) could stabilize the CNC suspension. Xyloglucan (XG) enhanced the CNC dispersion above a fraction of 10 wt %. For CNC suspension dispersed with carboxylmethyl cellulose (CMC) we observed the most long-lasting stability, up to 1 month. The cellulose binding proteins could not only enhance the dispersion of the CNCs, but also functionalize the surface. This we demonstrated by attaching gold nanoparticles (GNPs) to the proteins, thus, forming a monolayer of GNPs on the CNC surface. Cryo transmission electron microscopy (Cryo-TEM) imaging confirmed the attachment of the GNPs to CNC solution conditions.

Rod-Like Nanoparticles with Striped and Helical Topography.

The behavior of nanoparticles in solution is largely dominated by their shape and interaction potential. Despite considerable progress in the preparation of patchy and compartmentalized particles, access to nanoparticles with complex surface patterns and topographies remains limited. Here, we show that polyanionic brushes tethered to rod-like cellulose nanocrystals (CNCs) spontaneously develop a striped or helical topography through interpolyelectrolyte complexation with polycationic diblock copolymers. Using cryogenic transmission electron microscopy (cryo-TEM) and tomography (cryo-ET), we follow the complexation process and analyze the delicate 3D topography on the CNC surface. The described approach is facile and modular and can be extended to other block chemistries, nanoparticles, and surfaces, thereby providing a versatile platform toward surface-patterned particles with complex topographies and spatially arranged functional groups.

Modular architecture of protein binding units for designing properties of cellulose nanomaterials.

Molecular biomimetic models suggest that proteins in the soft matrix of nanocomposites have a multimodular architecture. Engineered proteins were used together with nanofibrillated cellulose (NFC) to show how this type of architecture leads to function. The proteins consist of two cellulose-binding modules (CBM) separated by 12-, 24-, or 48-mer linkers. Engineering the linkers has a considerable effects on the interaction between protein and NFC in both wet colloidal state and a dry film. The protein optionally incorporates a multimerizing hydrophobin (HFB) domain connected by another linker. The modular structure explains effects in the hydrated gel state, as well as the deformation of composite materials through stress distribution and crosslinking. Based on this work, strategies can be suggested for tuning the mechanical properties of materials through the coupling of protein modules and their interlinking architectures.

Disulfide-Functionalized Unimolecular Micelles as Selective Redox-Responsive Nanocarriers.

Redox-sensitive hyperbranched dendritic-linear polymers (HBDLPs) were prepared and stabilized individually as unimolecular micelles with diameters in the range 25-40 nm. The high molecular weight (500-950 kDa), core-shell amphiphilic structures were synthesized through a combination of self-condensing vinyl copolymerization (SCVCP) and atom transfer radical polymerization (ATRP). Cleavable disulfide bonds were introduced, either in the backbone, or in pendant groups, of the hyperbranched core of the HBDLPs. By triggered reductive degradation, the HBDLPs showed up to a 7-fold decrease in molecular weight, and the extent of degradation was tuned by the amount of incorporated disulfides. The HBDLP with pendant disulfide-linked functionalities in the hyperbranched core was readily postfunctionalized with a hydrophobic dye, as a mimic for a drug. An instant release of the dye was observed as a response to a reductive environment similar to the one present intracellularly. The proposed strategy shows a facile route to highly stable unimolecular micelles, which attractively exhibit redox-responsive degradation and cargo release properties.

Optical and mechanical properties of nanofibrillated cellulose: Toward a robust platform for next-generation green technologies.

Nanofibrillated cellulose, a polymer that can be obtained from one of the most abundant biopolymers in nature, is being increasingly explored due to its outstanding properties for packaging and device applications. Still, open challenges in engineering its intrinsic properties remain to address. To elucidate the optical and mechanical stability of nanofibrillated cellulose as a standalone platform, herein we report on three main findings: (i) for the first time an experimental determination of the optical bandgap of nanofibrillated cellulose, important for future modeling purposes, based on the onset of the optical bandgap of the nanofibrillated cellulose film at Eg≈275 nm (4.5 eV), obtained using absorption and cathodoluminescence measurements. In addition, comparing this result with ab-initio calculations of the electronic structure the exciton binding energy is estimated to be Eex≈800 meV; (ii) hydrostatic pressure experiments revealed that nanofibrillated cellulose is structurally stable at least up to 1.2 GPa; and (iii) surface elastic properties with repeatability better than 5% were observed under moisture cycles with changes of the Young modulus as large as 65%. The results obtained show the precise determination of significant properties as elastic properties and interactions that are compared with similar works and, moreover, demonstrate that nanofibrillated cellulose properties can be reversibly controlled, supporting the extended potential of nanofibrillated cellulose as a robust platform for green-technology applications.

Nacre-mimetics with synthetic nanoclays up to ultrahigh aspect ratios.

Nacre-mimetics hold great promise as mechanical high-performance and functional materials. Here we demonstrate large progress of mechanical and functional properties of self-assembled polymer/nanoclay nacre-mimetics by using synthetic nanoclays with aspect ratios covering three orders in magnitude (25-3,500). We establish comprehensive relationships among structure formation, nanostructuration, deformation mechanisms and mechanical properties as a function of nanoclay aspect ratio, and by tuning the viscoelastic properties of the soft phase via hydration. Highly ordered, large-scale nacre-mimetics are obtained even for low aspect ratio nanoplatelets and show pronounced inelastic deformation with very high toughness, while those formed by ultralarge nanoplatelets exhibit superb stiffness and strength, previously only reachable for highly crosslinked materials. Regarding functionalities, we report formerly impossible glass-like transparency, and excellent gas barrier considerably exceeding earlier nacre-mimetics based on natural nanoclay. Our study enables rational design of future high-performance nacre-mimetic materials and opens avenues for ecofriendly, transparent, self-standing and strong advanced barrier materials.

Enhanced plastic deformations of nanofibrillated cellulose film by adsorbed moisture and protein-mediated interactions.

Biological composites are typically based on an adhesive matrix that interlocks rigid reinforcing elements in fiber composite or brick-and-mortar assemblies. In nature, the adhesive matrix is often made up of proteins, which are also interesting model systems, as they are unique among polymers in that we know how to engineer their structures with atomic detail and to select protein elements for specific interactions with other components. Here we studied how fusion proteins that consist of cellulose binding proteins linked to proteins that show a natural tendency to form multimer complexes act as an adhesive matrix in combination with nanofibrillated cellulose. We found that the fusion proteins are retained with the cellulose and that the proteins mainly affect the plastic yield behavior of the cellulose material as a function of water content. Interestingly, the proteins increased the moisture absorption of the composite, but the well-known plastifying effect of water was clearly decreased. The work helps to understand the functional basis of nanocellulose composites as materials and aims toward building model systems for molecular biomimetic materials.

Formation of ceramophilic chitin and biohybrid materials enabled by a genetically engineered bifunctional protein.

A bifunctional protein composed of a highly negatively charged oyster shell protein and a chitin-binding domain enabled the formation of biohybrid materials through non-covalent surface modification of chitin nanofibres. The results demonstrate that specific biomolecular interactions offer a route for the formation of biosynthetic materials.

Facile access to large-scale, self-assembled, nacre-inspired, high-performance materials with tunable nanoscale periodicities.

Although advances have been reported to mimic the mechanically excellent structure of natural nacre, larger-scale applications are still limited due to time and energy-intensive preparation pathways. Herein, we demonstrate that simple high-shear homogenization of dispersions containing biobased high molecular weight sodium carboxymethyl cellulose (700 kg/mol, CMC) and natural sodium montmorillonite (MTM), serving as the soft energy-dissipating phase and reinforcing platelets, respectively, can be used to prepare large-area and thick films with well-aligned hard/soft nacre-mimetic mesostructure. During this process, core-shell nanoplatelets with intrinsic hard/soft structure form, which then self-assemble into a layered nanocomposite during water removal. The nanoscale periodicities of the alternating hard/soft layers can be precisely tuned by changing the ratio of CMC to MTM, which allows studying the evolution of mechanical properties as a function of the lamellar nanoscale periodicity and fractions of hard to soft material. Remarkable mechanical stiffness (25 GPa) and strength (320 MPa) can be obtained placing these materials among the top end of nacre-inspired materials reported so far. Mechanical homogenization also allows direct preparation of concentrated, yet homogeneous, gel-like dispersions of high nanoclay content, suited to doctor-blade large-area and thick films with essentially the same properties as films cast from dilute dispersions. In terms of functional properties, we report high-transparency, shape-persistent fire-blocking and the ability to surface-pattern via inkjet printing. Considering the simple, fully scalable, waterborne preparation pathway, and the use of nature-based components, we foresee applications as ecofriendly, bioinspired materials to promote sustainable engineering materials and novel types of functional barrier coatings and substrates.

Facile method for stiff, tough, and strong nanocomposites by direct exfoliation of multilayered graphene into native nanocellulose matrix.

Nanofibrillated cellulose (NFC) is a natural fibrillar material with exceptionally high mechanical properties. It has, however, been exceedingly difficult to achieve nanocomposites with drastically improved mechanical properties by dispersing NFC as random networks to polymer matrices, even using compatibilization. We show nanocomposites consisting of aligned assemblies of multilayered graphene and NFC with excellent tensile mechanical properties without any surface treatments. The optimum composition was found at 1.25 wt % graphene multilayers, giving a Young's modulus of 16.9 GPa, ultimate strength of 351 MPa, strain of 12%, and work-of-fracture of 22.3 MJ m(-3). This combines high strength with relatively high toughness and is obtained by direct exfoliation of graphite within aqueous hydrogels of NFC where an optimum sonication power is described. The results suggest the existence of an attractive interaction between multilayered graphene flakes and cellulose. Aligned assemblies are obtained by removal of water by filtration. The concept can be beneficial for applications because it results in high mechanical properties by a simple and environmentally green process.

Polyelectrolyte brushes grafted from cellulose nanocrystals using Cu-mediated surface-initiated controlled radical polymerization.

Herein we report the synthesis of cellulose nanocrystals (CNCs) grafted with poly(acrylic acid) (PAA) chains of different lengths using Cu-mediated surface initiated-controlled radical polymerization (SI-CRP). First, poly(tert-butylacrylate) (PtBA) brushes were synthesized; then, subsequent acid hydrolysis was used to furnish PAA brushes tethered onto the CNC surfaces. The CNCs were chemically modified to create initiator moieties on the CNC surfaces using chemical vapor deposition (CVD) and continued in solvent phase in DMF. A density of initiator groups of 4.6 bromine ester groups/nm(2) on the CNC surface was reached, suggesting a dense functionalization and a promising starting point for the controlled/living radical polymerization. The SI-CRP of tert-butylacrylate proceeded in a well-controlled manner with the aid of added sacrificial initiator, yielding polymer brushes with polydispersity values typically well below 1.12. We calculated the polymer brush grafting density to almost 0.3 chains/nm(2), corresponding to high grafting densities and dense polymer brush formation on the nanocrystals. Successful rapid acid hydrolysis to remove the tert-butyl groups yielded pH-responsive PAA-polyelectrolyte brushes bound to the CNC surface. Individually dispersed rod-like nanoparticles with brushes of PtBA or PAA were clearly visualized by AFM and TEM imaging.

Colloidal ionic assembly between anionic native cellulose nanofibrils and cationic block copolymer micelles into biomimetic nanocomposites.

We present a facile ionic assembly between fibrillar and spherical colloidal objects toward biomimetic nanocomposites with majority hard and minority soft domains based on anionic reinforcing native cellulose nanofibrils and cationic amphiphilic block copolymer micelles with rubbery core. The concept is based on ionic complexation of carboxymethylated nanofibrillated cellulose (NFC, or also denoted as microfibrillated cellulose, MFC) and micelles formed by aqueous self-assembly of quaternized poly(1,2-butadiene)-block-poly(dimethylaminoethyl methacrylate) with high fraction of the NFC reinforcement. The adsorption of block copolymer micelles onto nanocellulose is shown by quartz crystal microbalance measurements, atomic force microscopy imaging, and fluorescent optical microscopy. The physical properties are elucidated using electron microscopy, thermal analysis, and mechanical testing. The cationic part of the block copolymer serves as a binder to NFC, whereas the hydrophobic rubbery micellar cores are designed to facilitate energy dissipation and nanoscale lubrication between the NFC domains under deformation. We show that the mechanical properties do not follow the rule of mixtures, and synergistic effects are observed with promoted work of fracture in one composition. As the concept allows wide possibilities for tuning, the work suggests pathways for nanocellulose-based biomimetic nanocomposites combining high toughness with stiffness and strength.

Large-area, lightweight and thick biomimetic composites with superior material properties via fast, economic, and green pathways.

Although remarkable success has been achieved to mimic the mechanically excellent structure of nacre in laboratory-scale models, it remains difficult to foresee mainstream applications due to time-consuming sequential depositions or energy-intensive processes. Here, we introduce a surprisingly simple and rapid methodology for large-area, lightweight, and thick nacre-mimetic films and laminates with superior material properties. Nanoclay sheets with soft polymer coatings are used as ideal building blocks with intrinsic hard/soft character. They are forced to rapidly self-assemble into aligned nacre-mimetic films via paper-making, doctor-blading or simple painting, giving rise to strong and thick films with tensile modulus of 45 GPa and strength of 250 MPa, that is, partly exceeding nacre. The concepts are environmentally friendly, energy-efficient, and economic and are ready for scale-up via continuous roll-to-roll processes. Excellent gas barrier properties, optical translucency, and extraordinary shape-persistent fire-resistance are demonstrated. We foresee advanced large-scale biomimetic materials, relevant for lightweight sustainable construction and energy-efficient transportation.