RESUMEN
Chemical reduction of a vertically expanded pentacene, TIPS-peri-pentacenopentacene (TIPS-PPP), with sodium metal in THF readily afforded a doubly-reduced product isolated as [{Na+(THF)3}2(TIPS-PPP2-)]. Single-crystal X-ray diffraction revealed the formation of a π-complex of TIPS-PPP2- with two {Na+(THF)3} moieties. The sodium ion is coordinated to three C-atoms at the most negatively charged edge sites and at the lateral ethynyl group. The delocalisation of the charge on the ethynyl function is accompanied by its notable elongation (Δ = 0.015 Å) coupled with the contraction of the adjacent single C-C bond (Δ = 0.033 Å). Bond length analysis supported by Harmonic Aromaticity Oscillator Model (HOMA) shows that the dianion can be written with four aromatic sextets in agreement with the Clar representation. Although TIPS-PPP2- has 36 π-electrons (4n), it does not show a global magnetic paratropic response. The rings with the most negative charge density have a very low paratropic response, while the other rings have a low diatropic response. Overall, the dianion is a non-aromatic molecule.
RESUMEN
Hexacarbazolylbenzene (6CzPh), which is benzene substituted by six carbazole rings, is a simple and attractive compound. Despite the success of a wide variety of carbazole derivatives in organic light-emitting diodes (OLEDs), 6CzPh has not received attention so far. Here, excellent performances of 6CzPh are revealed as a host material in OLEDs regarding conventional host materials. Various strategies are implemented to improve the performance of OLEDs, e.g., triplet utilization by thermally activated delayed fluorescence (TADF) and phosphorescence emitters for maximizing internal quantum efficiency, and molecular orientation control for increasing outcoupling efficiency. The present host material is suited for both criteria. Robustness of the structure and sufficiently high triplet energy enables a high external quantum efficiency with a long device lifetime. Besides, the host material boosts the horizontal molecular orientations of several guest emitters. It is noteworthy that disk-shaped 4CzIPN marks the complete horizontal molecular orientations (Θh = 100%, S = -0.50). These results provide an effective way of improving efficiencies without sacrificing device durability for future OLEDs.
RESUMEN
Ultrapure deep-blue emitters are in high demand for organic light-emitting diodes (OLEDs). Although color coordinates serve as straightforward parameters for assessing color purity, precise control over the maximum wavelength and full-width at half-maximum is necessary to optimize OLED performance, including luminance efficiency and luminous efficacy. Multiple-resonance (MR) emitters are promising candidates for achieving ideal luminescence properties; consequently, a wide variety of MR frameworks have been developed. However, most of these emitters experience a wavelength displacement from the ideal color, which limits their practical applicability. Therefore, a molecular design that is compatible with MR emitters for modulating their energy levels and color output is particularly valuable. Here, it is demonstrated that the azepine donor unit induces an appropriate blue-shift in the emission maximum while maintaining efficient MR characteristics, including high photoluminescence quantum yield, narrow emission, and a fast reverse intersystem crossing rate. OLEDs using newly developed MR emitters based on the ν-DABNA framework simultaneously exhibit a high quantum efficiency of ≈30%, luminous efficacy of ≈20 lm W-1, exceptional color purity with Commission Internationale de l'Éclairage coordinates as low as (0.14, 0.06), and notably high operational stability. These results demonstrate unprecedentedly high levels compared with those observed in previously reported deep-blue emitters.
RESUMEN
Contemporary materials discovery requires intricate sequences of synthesis, formulation, and characterization that often span multiple locations with specialized expertise or instrumentation. To accelerate these workflows, we present a cloud-based strategy that enabled delocalized and asynchronous design-make-test-analyze cycles. We showcased this approach through the exploration of molecular gain materials for organic solid-state lasers as a frontier application in molecular optoelectronics. Distributed robotic synthesis and in-line property characterization, orchestrated by a cloud-based artificial intelligence experiment planner, resulted in the discovery of 21 new state-of-the-art materials. Gram-scale synthesis ultimately allowed for the verification of best-in-class stimulated emission in a thin-film device. Demonstrating the asynchronous integration of five laboratories across the globe, this workflow provides a blueprint for delocalizing-and democratizing-scientific discovery.
RESUMEN
Boron-based multiple-resonance (MR) emitters exhibit the advantages of narrowband emission, high absolute photoluminescence quantum yield, thermally activated delayed fluorescence (TADF), and sufficient stability during the operation of organic light-emitting diodes (OLEDs). Thus, such MR emitters have been widely applied as blue emitters in triplet-triplet-annihilation-driven fluorescent devices used in smartphones and televisions. Moreover, they hold great promise as TADF or terminal emitters in TADF-assisted fluorescence or phosphor-sensitised fluorescent OLEDs. Herein we comprehensively review organoboron-based MR emitters based on their synthetic strategies, clarify structure-photophysical property correlations, and provide design guidelines and future development prospects.
RESUMEN
Organic light-emitting diodes (OLEDs) that efficiently emit near-infrared (NIR) light and consume little power will create valuable applications for OLEDs beyond just displays. Here, we report such a NIR-OLED with high operational stability that can be used as a light source for three-dimensional sensing of object's surfaces. Using a narrow-energy-gap material as a host for producing NIR hyperfluorescence system, we fabricated a NIR-OLED exhibiting intense emission at 930 nm with a high external electroluminescence quantum efficiency of more than 1% at a current density of 100 milliamperes per square meter without any degradation even after more than 300 hours of operation. The NIR-OLEDs were integrated with dense complementary metal-oxide semiconductor circuits to make a micro-NIR-OLED projector (0.21 inch, 230,400 pixels). By actively driving the projector on a pixel by pixel and projecting their emission onto objects, we successfully scanned and sensed the surfaces in three dimensions with invisible NIR.
RESUMEN
Reverse intersystem crossing (RISC) in purely organic molecules has become an attractive research topic since the demonstration of high efficiencies in organic light-emitting diodes using thermally activated delayed fluorescence (TADF). Although the intermolecular interactions have a significant impact on the exciton dynamics, it is generally difficult to identify the quantitative relationship associated with a specific factor. In this work, we used a clathrate crystal with TADF and H2O molecules to evaluate the effect of hydrogen bonding while maintaining molecular conformations and other intermolecular interactions. The hydrogen bonding shifted the charge transfer excited states to lower energies, resulting in superior TADF properties. Although the increase in the RISC rate is considered to enhance the stabilities of TADF molecules, photostability analysis revealed nearly the same degradation speed despite the 3 times faster RISC rate.
RESUMEN
A considerable variety of donor-acceptor (D-A) combinations offers the potential for realizing highly efficient thermally activated delayed fluorescence (TADF) materials. Multiple D-A type compounds are one of the promising families of TADF materials in terms of stability as well as efficiencies. However, those emitters are always composed of carbazole-based donors despite a wide choice of moieties used in linearly linked single D-A molecules. Herein, we developed a multiple D-A type TADF compound with two distinct donor units of 9,10-dihydro-9,9-dimethylacridine (DMAC) and carbazole as the hetero-donor design. The new emitter exhibits high photoluminescence quantum yield (PLQY) in various conditions including polar media blend and high concentrations. Organic light-emitting diodes (OLEDs) showed a reasonably high external quantum efficiency (EQE). In addition, we revealed that the multiple-D-A type molecules showed better photostability than the single D-A type molecules, while the operational stability in OLEDs involves dominant other factors.
RESUMEN
Recently, there has been intense interest in pure organic room-temperature phosphorescence (ORTP) from cocrystals composed of 1,4-diiodotetrafluorobenzene (DITFB) and a variety of polycyclic aromatic hydrocarbons (PAHs) or their derivatives. To expand the possibility of halogen bonding-based cocrystals, the relationship between the crystal packing motifs and ORTP characteristics in binary cocrystals composed of DITFB and PAHs of phenanthrene (Phen), chrysene (Chry), and pyrene (Pyr), respectively, is investigated. The σ-hole···π and π-hole···π interactions determine not only the crystal packing motifs but also photoluminescence quantum yields (PLQYs). The Phen-DITFB and Chry-DITFB binary cocrystals with σ-hole···π interactions show higher PLQY compared with the Pyr-DITFB binary cocrystal with π-hole···π interaction. Further, to clarify the effect of crystal structures on PLQY, ternary cocrystals are prepared by partially doping Pyr into Phen-DITFB. The crystal packing motif of the ternary cocrystal originates from a Phen-DITFB cocrystal with σ-hole···π interaction, and some of the Phen sites are randomly replaced with Pyr molecules. The ORTP emission is derived from Pyr. The maximum PLQY is >20% due to suppressing nonradiative decay by changing the crystal packing motif.
RESUMEN
This work reports a new acceptor for constructing donor-acceptor type (D-A type) blue thermally activated delayed fluorescence (TADF) emitters with narrowed charge-transfer (CT) emissions. A new acceptor core, carbazole-2-carbonitrile (CCN), is formed by the fusion of carbazole and benzonitrile. Three D-A type TADF emitters based on the CCN acceptor, namely 3CzCCN, 3MeCzCCN, and 3PhCzCCN, have been successfully synthesized and characterized. These emitters show deep-blue emissions from 439 to 457 nm with high photoluminescence quantum yields of up to 85% in degassed toluene solutions. Interestingly, all CCN-based deep-blue TADF emitters result in narrow CT emissions with full-width at half-maximums (FWHMs) of less than 50 nm in toluene solutions, which are pretty narrower compared with those of typical D-A type TADF emitters. Devices based on these emitters show high maximum external quantum efficiencies of up to 17.5%.
RESUMEN
Hyperfluorescent organic light-emitting diodes (HF-OLEDs) enable a cascading Förster resonance energy transfer (FRET) from a suitable thermally activated delayed fluorescent (TADF) assistant host to a fluorescent end-emitter to give efficient OLEDs with relatively narrowed electroluminescence compared to TADF-OLEDs. Efficient HF-OLEDs require optimal FRET with minimum triplet diffusion via Dexter-type energy transfer (DET) from the TADF assistant host to the fluorescent end-emitter. To hinder DET, steric protection of the end-emitters has been proposed to disrupt triplet energy transfer. In this work, the first HF-OLEDs based on structurally well-defined macromolecules, dendrimers is reported. The dendrimers contain new highly twisted dendrons attached to a Cibalackrot core, resulting in high solubility in organic solvents. HF-OLEDs based on dendrimer blend films are fabricated to show external quantum efficiencies of >10% at 100 cd m-2 . Importantly, dendronization with the bulky dendrons is found to have no negative impact to the FRET efficiency, indicating the excellent potential of the dendritic macromolecular motifs for HF-OLEDs. To fully prevent the undesired triplet diffusion, Cibalackrot dendrimers HF-OLEDs are expected to be further improved by adding additional dendrons to the Cibalackrot core and/or increasing dendrimer generations.
Asunto(s)
Dendrímeros , Colorantes , Transferencia Resonante de Energía de FluorescenciaRESUMEN
External quantum efficiency (EQE) roll-off under high current injection has been one of the major limiting factors toward the development of organic semiconductor laser diodes (OSLDs). While significant progress in this regard has been made on organic semiconductors (OSCs) emitting in the blue-green region of the visible spectrum, OSCs with longer wavelength emission (>600 nm) have fallen behind in both material development and the advancement in device architectures suitable for the realization of OSLDs. Therefore, to make simultaneous incremental advancements, a host-guest system comprising of a high performing poly(9,9-dioctylfluorene-alt-benzothiadiazole) (F8BT) polymer and an efficient small molecule laser dye, dithiophenyl diketopyrrolopyrrole (DT-DPP), is used. This combination provides an extremely low amplified spontaneous emission threshold of 4.2 µJ cm-2 at an emission wavelength of 620 nm. The solution-processed organic light-emitting diodes (OLEDs) fabricated using this system exhibit a high external quantum efficiency (EQE) of 2.6% with low efficiency roll-off and high current injection up to 90 A cm-2 to yield ultrahigh luminance of over 1.5 million cd m-2 .
RESUMEN
The limitation of lasing duration less than nanosecond order has been a major problem for realizing organic solid-state continues-wave (CW) lasers and organic semiconductor laser diodes. Triplets accumulation under CW excitation has been well recognized as a critical inhibiting factor. To overcome this issue, the utilization of thermally activated delayed fluorescence (TADF) emitters is a promising mechanism because of efficient reverse intersystem crossing. Herein, we model the triplet accumulation processes under lasing and propose the active utilization of TADF for lasing based on our simulation analysis. We used the rate constants experimentally determined from the optical properties of a boron difluoride curcuminoid fluorophore showing both TADF and lasing. We demonstrate that the intersystem crossing efficiency is gradually increased after the convergence of relaxation oscillation, i.e., terminating laser oscillation. In addition, we found that when the reverse intersystem crossing rate is close to the intersystem crossing rate, CW lasing becomes dominant.
RESUMEN
We report the synthesis and optoelectronic properties of TIPS-peri-pentacenopentacene (TIPS-PPP), a vertical extension of TIPS-pentacene (TIPS-PEN) and a low-band-gap material with remarkable stability. We found the synthetic conditions to avoid the competition between 1,2- and 1,4-addition of lithium acetylide on the large aromatic dione. The high stability of TIPS-PPP is due to the peri-fusion which increases the aromaticity by generating two localized aromatic sextets that are flanked with 2 diene fragments, similar to two fused-anthracenes. Like TIPS-PEN, TIPS-PPP shows the archetypal 2D brickwall motif in crystals with a larger transfer integral and smaller reorganization energy. The high mobility of up to 1â cm2 V-1 s-1 was obtained in an organic field-effect transistor fabricated by a wet process. Also, TIPS-PPP was used as a near-infrared (NIR) emitter for NIR organic-light-emitting-diode devices resulting in a high external quantum efficiency at 800â nm.
RESUMEN
A bright near-infrared (NIR) fluorescent molecule was developed based on the donor-acceptor-donor (D-A-D) approach using an aza-BODIPY analog called pyrrolopyrrole aza-BODIPY (PPAB) as an electron-accepting chromophore. Directly introducing electron-donating triphenylamine (TPA) to develop a D-A-D structure caused redshifts of absorption and emission of PPAB into the NIR region with an enhanced fluorescence brightness of up to 5.2×104 â m-1 cm-1 , whereas inserting a phenylene linker between the TPA donor and the PPAB acceptor induced solvatochromic behavior in emission. Transient absorption spectra and theoretical calculations revealed the presence of a highly emissive hybridized locally excited and charge-transfer state in the former case and the contribution of the dark charge-separated state to the excited state in the latter case. The bright D-A-D PPAB as a novel emitter resulted in a NIR electroluminescence with a high external quantum efficiency of 3.7 % and a low amplified spontaneous emission threshold of ca. 80â µJ cm-2 , indicating the high potential for NIR optoelectronic applications.
RESUMEN
Near-IR organic light-emitting diodes (NIR-OLEDs) are potential light-sources for various sensing applications as OLEDs have unique features such as ultra-flexibility and low-cost fabrication. However, the low external electroluminescence (EL) quantum efficiency (EQE) of NIR-OLEDs is a critical obstacle for potential applications. Here, we demonstrate a highly efficient NIR emitter with thermally activated delayed fluorescence (TADF) and its application to NIR-OLEDs. The NIR-TADF emitter, TPA-PZTCN, has a high photoluminescence quantum yield of over 40 % with a peak wavelength at 729â nm even in a highly doped co-deposited film. The EL peak wavelength of the NIR-OLED is 734â nm with an EQE of 13.4 %, unprecedented among rare-metal-free NIR-OLEDs in this spectral range. TPA-PZTCN can sensitize a deeper NIR fluorophore to achieve a peak wavelength of approximately 900â nm, resulting in an EQE of over 1 % in a TADF-sensitized NIR-OLED with high operational device durability (LT95 >600â h.).
RESUMEN
Triplet excitons have been identified as the major obstacle to the realisation of organic laser diodes, as accumulation of triplet excitons leads to significant losses under continuous wave (CW) operation and/or electrical excitation. Here, we report the design and synthesis of a solid-state organic triplet quencher, as well as in-depth studies of its dispersion into a solution processable bis-stilbene-based laser dye. By blending the laser dye with 20 wt% of the quencher, negligible effects on the ASE thresholds, but a complete suppression of singlet-triplet annihilation (STA) and a 20-fold increase in excited-state photostability of the laser dye under CW excitation, were achieved. We used small-area OLEDs (0.2 mm2) to demonstrate efficient STA suppression by the quencher in the nanosecond range, supported by simulations to provide insights into the observed STA quenching under electrical excitation. The results demonstrate excellent triplet quenching ability under both optical and electrical excitations in the nanosecond range, coupled with excellent solution processability.
RESUMEN
Five new N-phenyl-carbazole benzopyrans bearing different substitutions on one of the phenyl rings at the sp3 carbon have been synthesized. Their molecular structures were investigated by X-ray and NMR analyses and through quantum chemical calculations. The photochromic mechanism under UV irradiation in toluene, consisting of the consecutive formation of transoid-cis (TC) and transoid-trans (TT) isomers, was studied by UV-vis spectral and kinetic analyses. These molecules have been specifically designed to ascertain the possibility of favouring the formation of the less thermodynamically stable TT at the photostationary state, upon exploiting steric hindrance effects on the diene part of the molecule. The spectrokinetic study allowed the estimation of most of the spectrokinetic parameters, such as molar extinction coefficients, quantum yields of UV colouration and visible photobleaching, and the rate constants of the fast and slow thermal bleaching processes. Peculiar effects of substituents with different donor strengths on one phenyl ring located at the 3-position were observed on the spectrokinetic properties.
RESUMEN
A simple way to control only the surface properties of polymer materials, without changing the bulk properties, has long been desired. The segregation behavior when a component with a tiny amount fed into the matrix is thermodynamically enriched at the surface is one of the candidate methods. This capability was examined herein by focusing on a star-shaped polyhedral oligomeric silsesquioxane (s-POSS), where the central POSS unit is tethered to eight isobutyl-substituted POSS cages as a surface modifier. X-ray photoelectron spectroscopy revealed that the surface of a film of poly(methyl methacrylate) (PMMA) was almost completely covered with POSS units by adding just 5 wt % s-POSS to it. The segregated POSS dramatically altered the physical properties such as molecular motion and the mechanical and dielectric responses at the surface of the PMMA film. These findings make it clear that s-POSS is an excellent surface modifier for glassy polymers.