Robotic arm-assisted conversion of unicompartmental knee arthroplasty to total knee arthroplasty.

Aims: Robotic arm-assisted surgery offers accurate and reproducible guidance in component positioning and assessment of soft-tissue tensioning during knee arthroplasty, but the feasibility and early outcomes when using this technology for revision surgery remain unknown. The objective of this study was to compare the outcomes of robotic arm-assisted revision of unicompartmental knee arthroplasty (UKA) to total knee arthroplasty (TKA) versus primary robotic arm-assisted TKA at short-term follow-up. Methods: This prospective study included 16 patients undergoing robotic arm-assisted revision of UKA to TKA versus 35 matched patients receiving robotic arm-assisted primary TKA. In all study patients, the following data were recorded: operating time, polyethylene liner size, change in haemoglobin concentration (g/dl), length of inpatient stay, postoperative complications, and hip-knee-ankle (HKA) alignment. All procedures were performed using the principles of functional alignment. At most recent follow-up, range of motion (ROM), Forgotten Joint Score (FJS), and Oxford Knee Score (OKS) were collected. Mean follow-up time was 21 months (6 to 36). Results: There were no differences between the two treatment groups with regard to mean change in haemoglobin concentration (p = 0.477), length of stay (LOS, p = 0.172), mean polyethylene thickness (p = 0.065), or postoperative complication rates (p = 0.295). At the most recent follow-up, the primary robotic arm-assisted TKA group had a statistically significantly improved OKS compared with the revision UKA to TKA group (44.6 (SD 2.7) vs 42.3 (SD 2.5); p = 0.004) but there was no difference in the overall ROM (p = 0.056) or FJS between the two treatment groups (86.1 (SD 9.6) vs 84.1 (4.9); p = 0.439). Conclusion: Robotic arm-assisted revision of UKA to TKA was associated with comparable intraoperative blood loss, early postoperative rehabilitation, functional outcomes, and complications to primary robotic TKA at short-term follow-up. Robotic arm-assisted surgery offers a safe and reproducible technique for revising failed UKA to TKA.

Treatment strategy and clinical outcomes of surgically managed hip periprosthetic fractures: analysis from a high-volume centre.

BACKGROUND: Hip periprosthetic fractures (PPF) after total hip arthroplasty (THA) are becoming increasingly prevalent. Their management is secondary to the fracture type and the stability of the implant. This study aimed to provide the outcomes of operatively managed PPF from a high-volume centre to help guide future decision making. METHODS: This was a retrospective study of prospectively collected data from January 2008 to January 2021. Patient demographics, implant specific details, and fixation strategy were collected. Complications including infection, reoperation, re-fracture, re-revision, were collected. Short-term mortality was evaluated at 3 months and 1 year. P-values <0.05 were considered significant. RESULTS: 282 surgically managed PPF were identified. Vancouver B2 were predominant in 52% of the cases. Revision alone and revision with additional fixation were the most frequent strategies in 168 cases (60%). Complications requiring reoperation occurred in 20% of the cases, with infection as the most frequent (8.5%). Mortality rate was 7.8% at 3 months and 15.7% at 1 year, with significantly lower rates in B2 type. B2 fractures treated with cemented stems had a significantly lower 1-year mortality than distal fit revisions. CONCLUSIONS: PPF is associated with a high complication rate. Revision alone and revision with additional fixation remain the preferred method in B2/B3 type fractures, however, cemented revision can yield similar outcomes with lower short-term mortality. Considering the high-risk elderly and frail category of patients, a multidisciplinary team is necessary to improve outcomes and reduce mortality.

Two-Dimensional Versus Three-Dimensional Preoperative Planning in Total Hip Arthroplasty.

BACKGROUND: Preoperative planning in total hip arthroplasty (THA) involves utilizing radiographs or advanced imaging modalities, including computerized tomography scans, for precise prediction of implant sizing and positioning. This study aimed to compare 3-dimensional (3D) versus 2-dimensional (2D) preoperative planning in primary THA with respect to key surgical metrics, including restoration of the horizontal and vertical center of rotation (COR), combined offset, and leg length. METHODS: This study included 60 patients undergoing primary THA for symptomatic hip osteoarthritis (OA), randomly allocated to either robotic arm-assisted or conventional THA. Digital 2D templating and 3D planning using the robotic software were performed for all patients. All measurements to evaluate the accuracy of templating methods were conducted on the preoperative computerized tomography scanogram, using the contralateral hip as a reference. Sensitivity analyses explored differences between 2D and 3D planning in patients who had superolateral or medial OA patterns. RESULTS: Compared to 2D templating, 3D templating was associated with less medialization of the horizontal COR (-1.2 versus -0.2 mm, P = .002) and more accurate restoration of the vertical COR (1.63 versus 0.3 mm, P < .001) with respect to the contralateral side. Furthermore, 3D templating was superior for planned restoration of leg length (+0.23 versus -0.74 mm, P = .019). Sensitivity analyses demonstrated that in patients who had medial OA, 3D planning resulted in less medialization of horizontal COR and less offset reduction. Conversely, in patients who had superolateral OA, there was less lateralization of horizontal COR and less offset increase using 3D planning. Additionally, 3D planning showed superior reproducibility for stem, acetabular cup sizes, and neck angle, while 2D planning often led to smaller stem and cup sizes. CONCLUSIONS: Our findings indicated higher accuracy in the planned restoration of native joint mechanics using 3D planning. Additionally, this study highlights distinct variances between the 2 planning methods across different OA pattern subtypes, offering valuable insights for clinicians employing 2D planning.

Strong Correlation Between Standing Long-Leg Radiographs and CT Scans in Measuring Coronal Knee Alignment.

BACKGROUND: The objective of this study was to evaluate the correlation in measurements of the lower-limb coronal alignment between long-leg radiographs (LLRs) and computed tomography (CT) scanograms that were made during preoperative planning for robotic-arm-assisted knee arthroplasty. On the basis of published evidence demonstrating a good correlation between these imaging modalities in measuring the lower-limb mechanical axis, we hypothesized that there would be no significant differences between the 2 in the present study. METHODS: This multicenter cohort study across 3 tertiary centers included 300 patients undergoing primary robotic-arm-assisted total knee arthroplasty (TKA) or unicompartmental knee arthroplasty (UKA) for whom LLRs and CT scanograms were available preoperatively. The study involved measuring the medial proximal tibial angle (MPTA), lateral distal femoral angle (LDFA), hip-knee-ankle angle (HKA), joint line obliquity (JLO), joint-line convergence angle (JLCA), and arithmetic HKA (aHKA). The aHKA represents a method for estimating constitutional alignment using angles that are unaffected by joint-space narrowing. RESULTS: Strong correlations (p < 0.001) between the imaging modalities were found for the HKA (correlation coefficient, 0.912), aHKA (0.883), MPTA (0.820), LDFA (0.871), and JLO (0.778). A weaker correlation was observed for the JLCA in valgus knees as compared with varus knees (Spearman coefficients, 0.412 and 0.518, respectively). Regression models demonstrated that the degree of agreement was associated with the preoperative intra-articular deformity and the positioning of the lower limb during the CT scan (i.e., the lower-limb rotational angle). An initial JLCA within ±5° was associated with higher agreement. CONCLUSIONS: We observed a strong correlation between LLRs and CT scanograms that were made during the preoperative planning stage of robotic-arm-assisted knee arthroplasty, implying that CT scanograms can reliably be utilized to estimate the coronal alignment of the knee, potentially replacing the need for LLRs. Nevertheless, to attain a higher degree of agreement, it is crucial to ensure appropriate radiographic positioning of the lower limb. Additionally, surgeons must remain vigilant regarding potential discrepancies in cases involving substantial deformities. LEVEL OF EVIDENCE: Prognostic Level II. See Instructions for Authors for a complete description of levels of evidence.

A prospective randomized controlled trial comparing CT-based planning with conventional total hip arthroplasty versus robotic arm-assisted total hip arthroplasty.

Aims: Achieving accurate implant positioning and restoring native hip biomechanics are key surgeon-controlled technical objectives in total hip arthroplasty (THA). The primary objective of this study was to compare the reproducibility of the planned preoperative centre of hip rotation (COR) in patients undergoing robotic arm-assisted THA versus conventional THA. Methods: This prospective randomized controlled trial (RCT) included 60 patients with symptomatic hip osteoarthritis undergoing conventional THA (CO THA) versus robotic arm-assisted THA (RO THA). Patients in both arms underwent pre- and postoperative CT scans, and a patient-specific plan was created using the robotic software. The COR, combined offset, acetabular orientation, and leg length discrepancy were measured on the pre- and postoperative CT scanogram at six weeks following surgery. Results: There were no significant differences for any of the baseline characteristics including spinopelvic mobility. The absolute error for achieving the planned horizontal COR was median 1.4 mm (interquartile range (IQR) 0.87 to 3.42) in RO THA versus 4.3 mm (IQR 3 to 6.8; p < 0.001); vertical COR mean 0.91 mm (SD 0.73) in RO THA versus 2.3 mm (SD 1.3; p < 0.001); and combined offset median 2 mm (IQR 0.97 to 5.45) in RO THA versus 3.9 mm (IQR 2 to 7.9; p = 0.019). Improved accuracy was observed with RO THA in achieving the desired acetabular component positioning (root mean square error for anteversion and inclination was 2.6 and 1.3 vs 8.9 and 5.3, repectively) and leg length (mean 0.6 mm vs 1.4 mm; p < 0.001). Patient-reported outcome measures were comparable between the two groups at baseline and one year. Participants in the RO THA group needed fewer physiotherapy sessions postoperatively (median six (IQR 4.5 to 8) vs eight (IQR 6 to 11; p = 0.005). Conclusion: This RCT suggested that robotic-arm assistance in THA was associated with improved accuracy in restoring the native COR, better preservation of the combined offset, leg length correction, and superior accuracy in achieving the desired acetabular component positioning. Further evaluation through long-term and registry data is necessary to assess whether these findings translate into improved implant survival and functional outcomes.

Satisfactory 5-year functional outcomes following primary ACL reconstructions from the UK National Ligament Registry.

PURPOSE: The aim of this study was to describe the 10-year findings from the UK National Ligament Registry (NLR). METHODS: A retrospective review was performed for prospectively collected data on the NLR between January 2013 and December 2022. All patients who underwent primary ACL reconstruction (ACLR) on the registry were included. Surgical characteristics were analysed, including surgeon grade and case volume, concomitant knee procedures, venous thromboembolic prophylaxis, graft characteristics, femoral and tibial tunnel drilling, and fixation methods. Clinical outcomes were collected preoperatively and at 6 months, 1 year, 2 years and 5 years following the index procedure. RESULTS: During the study period, 17,492 unilateral ACLR procedures were recorded. Autograft was used in 98%, most commonly a combined semitendinosus and gracilis graft (77%) or patella tendon graft (31%). Allograft was used in only 1% of the patients. In 52% of cases, ACLR was associated with an additional procedure, with isolated medial meniscal surgery being the most common (21%). Femoral tunnel drilling was mostly performed through an anteromedial portal (73%) and tibial tunnel drilling using an outside-in technique (92%). The most common method of femoral graft fixation was with an Endobutton fixed loop suspensory device (77%), while interference screws predominated for tibial tunnel fixation (86%). Patients who underwent ACLR surgery showed significant improvement in their functional outcome scores at six months, 1 year, 2 years and 5 years postoperatively. CONCLUSION: Data from the NLR shows a detailed description of the current trends and evolution of ACLR in the United Kingdom over the last 10 years. Satisfactory functional outcomes were observed 5 years postoperatively. This study provides useful information on the prevalence of ACL-associated injuries and current surgical techniques with the aim of improving the quality of clinical care and patients' outcomes. Moreover, it provides surgeons with a benchmark against which to compare current practices and functional outcomes following ACLR across the United Kingdom. LEVEL OF EVIDENCE: Level III.

Anterior cruciate ligament injuries in female athletes: risk factors and strategies for prevention.

Anterior cruciate ligament (ACL) injuries are among the most common and debilitating knee injuries in professional athletes with an incidence in females up to eight-times higher than their male counterparts. ACL injuries can be career-threatening and are associated with increased risk of developing knee osteoarthritis in future life. The increased risk of ACL injury in females has been attributed to various anatomical, developmental, neuromuscular, and hormonal factors. Anatomical and hormonal factors have been identified and investigated as significant contributors including osseous anatomy, ligament laxity, and hamstring muscular recruitment. Postural stability and impact absorption are associated with the stabilizing effort and stress on the ACL during sport activity, increasing the risk of noncontact pivot injury. Female patients have smaller diameter hamstring autografts than males, which may predispose to increased risk of re-rupture following ACL reconstruction and to an increased risk of chondral and meniscal injuries. The addition of an extra-articular tenodesis can reduce the risk of failure; therefore, it should routinely be considered in young elite athletes. Prevention programs target key aspects of training including plyometrics, strengthening, balance, endurance and stability, and neuromuscular training, reducing the risk of ACL injuries in female athletes by up to 90%. Sex disparities in access to training facilities may also play an important role in the risk of ACL injuries between males and females. Similarly, football boots, pitches quality, and football size and weight should be considered and tailored around females' characteristics. Finally, high levels of personal and sport-related stress have been shown to increase the risk of ACL injury which may be related to alterations in attention and coordination, together with increased muscular tension, and compromise the return to sport after ACL injury. Further investigations are still necessary to better understand and address the risk factors involved in ACL injuries in female athletes.

Factors associated with decreased length of stay following robotic arm-assisted and conventional total hip arthroplasty.

Aims: Postoperative length of stay (LOS) and discharge dispositions following arthroplasty can be used as surrogate measurements for improvements in patients' pathways and costs. With the increasing use of robotic technology in arthroplasty, it is important to assess its impact on LOS. The aim of this study was to identify factors associated with decreased LOS following robotic arm-assisted total hip arthroplasty (RO THA) compared with the conventional technique (CO THA). Methods: This large-scale, single-institution study included 1,607 patients of any age who underwent 1,732 primary THAs for any indication between May 2019 and January 2023. The data which were collected included the demographics of the patients, LOS, type of anaesthetic, the need for treatment in a post-anaesthesia care unit (PACU), readmission within 30 days, and discharge disposition. Univariate and multivariate logistic regression models were used to identify factors and the characteristics of patients which were associated with delayed discharge. Results: The multivariate model identified that age, female sex, admission into a PACU, American Society of Anesthesiologists grade > II, and CO THA were associated with a significantly higher risk of a LOS of > two days. The median LOS was 54 hours (interquartile range (IQR) 34 to 78) in the RO THA group compared with 60 hours (IQR 51 to 100) in the CO THA group (p < 0.001). The discharge dispositions were comparable between the two groups. A higher proportion of patients undergoing CO THA required PACU admission postoperatively, although without reaching statistical significance (7.2% vs 5.2%, p = 0.238). Conclusion: We found that among other baseline characteristics and comorbidities, RO THA was associated with a significantly shorter LOS, with no difference in discharge destination. With the increasing demand for THA, these findings suggest that robotic assistance in THA could reduce costs. However, randomized controlled trials are required to investigate the cost-effectiveness of this technology.

The Value of Computed Tomography Scan in Three-dimensional Planning and Intraoperative Navigation in Primary Total Hip Arthroplasty.

Total hip arthroplasty (THA) is a frequently performed procedure; the objective is restoration of native hip biomechanics and achieving functional range of motion (ROM) through precise positioning of the prosthetic components. Advanced three-dimensional (3D) imaging and computed tomography (CT)-based navigation are valuable tools in both the preoperative planning and intraoperative execution. The aim of this study is to provide a thorough overview on the applications of CT scans in both the preoperative and intraoperative settings of primary THA. Preoperative planning using CT-based 3D imaging enables greater accuracy in prediction of implant sizes, leading to enhancement of surgical workflow with optimization of implant inventory. Surgeons can perform a more thorough assessment of posterior and anterior acetabular wall coverage, acetabular osteophytes, anatomical landmarks, and thus achieve more functional implant positioning. Intraoperative CT-based navigation can facilitate precise execution of the preoperative plan, to attain optimal positioning of the prosthetic components to avoid impingement. Medial reaming can be minimized preserving native bone stock, which can enable restoration of femoral, acetabular, and combined offsets. In addition, it is associated with greater accuracy in leg length adjustment, a critical factor in patients' postoperative satisfaction. Despite the higher costs and radiation exposure, which currently limits its widespread adoption, it offers many benefits, and the increasing interest in robotic surgery has facilitated its integration into routine practice. Conducting additional research on ultra-low-dose CT scans and examining the potential for translation of 3D imaging into improved clinical outcomes will be necessary to warrant its expanded application.

Endoscopic Tendon Release for Iliopsoas Impingement After Total Hip Arthroplasty-Excellent Clinical Outcomes and Low Failure Rates at Short-Term Follow-Up.

PURPOSE: To investigate the clinical effectiveness of endoscopic iliopsoas tendon release (IPR) at the lesser trochanter (LT) in patients with iliopsoas impingement (IPI) after total hip arthroplasty (THA). METHODS: Between November 2017 and March 2021, a consecutive series of 36 patients were treated with endoscopic IPR for diagnosed IPI. Patients included had acetabular cup position confirmed by functional imaging (OPS, Corin, Pymble, NSW), typical clinical symptoms of IPI, and a positive response to diagnostic injection. Clinical assessment included validated patient-reported outcome measures (PROMs) along with hip flexion strength and active range of motion at different time marks up to 2-year follow-up, as well as surgical complications. RESULTS: Overall, 36 consecutive patients (11 males) with a mean age of 62 ± 12 years were included. All patients had failed nonoperative management. Dynamic computed tomography assessment was available in 89% of the patients, edge loading was reported in 10%, and variable cup overhang was reported in 50%. Clinically, PROMs were significantly improved at every time mark when compared with preoperative values (P < .001), showing the biggest improvement within the first 4 weeks after surgery. At the 6-month follow-up, peak isometric hip flexion strength on the operated side was 20% lower than the contralateral side (P < .001). Failure rate of the procedure was 2.8% (1 case). Linear regression showed no association between cup overhang and clinical outcomes. CONCLUSIONS: Endoscopic IPR at the LT is a safe and reproducible technique associated with significant and immediate improvement in pain, functional outcomes, and high patient satisfaction. With minimal short-term weakness, no complications, and only a single revision, even in cases with cup malposition and/or edge loading, we believe that endoscopic IPR can be considered as one of the first-line operative options in patients with symptomatic IPI, irrespective of component position. LEVEL OF EVIDENCE: Level IV, case series.

The Clinical Frailty Scale is a Strong Predictor of 1-Year Mortality in Surgically Managed Hip Periprosthetic Fracture: An Analysis From a High-Volume Institution.

BACKGROUND: Hip periprosthetic fractures (PPFs) after primary total hip arthroplasty are increasing with the number of primary implants and aging population. Mortality has been reported up to 34% at 1-year. The aim of this study was to evaluate the association of Clinical Frailty Scale (CFS) and 1-year mortality, complication rate, and length of stay (LOS) in surgically managed hip PPFs. METHODS: This was a retrospective study of prospectively collected data from January 2008 to January 2021. A total of 282 surgically managed hip PPFs were identified. Mean age was 79 years (range, 42 to 106). Preoperative scores were analyzed through linear regression to identify significant association with mortality, complication and LOS. Receiver operating characteristic curve and Area Under the Curve (AUC) were generated to evaluate the quality of the models and the discriminatory ability of each clinical score. Significance was considered at P values < .05. RESULTS: Mortality was 7.8% at 3-months and 15.7% at 1-year. Complication rate requiring surgery was 19.5% and mean LOS was 8.9 ± 7 days. The CFS was significantly associated with 3-month (odds ratio 2.23, P < .001) and 1-year mortality (odds ratio 2.01, P < .001). The receiver operating characteristic curve test for 1-year mortality showed a greater AUC for the CFS when compared with American Society for Anesthesiologists score and age-adjusted Charlson Comorbidity Index (AUC 0.80 versus 0.68 versus 0.72, respectively). CONCLUSIONS: Frailty is a syndrome with increased risk of mortality after surgically managed PPF. The CFS can be easily assessed at the time of admission and could be considered as a strong and reliable predictor of 1-year mortality with a greater AUC than the conventionally used American Society for Anesthesiologists score.

Increased accuracy in component positioning using an image-less robotic arm system in primary total knee arthroplasty: a retrospective study.

BACKGROUND: Robotic-assisted total knee arthroplasty (RTKA) and navigated total knee arthroplasty (NTKA) have shown improved knee alignment and reduced radiographic outliers. Recent studies have proven that conventional mechanical alignment may not be the optimal goal for every patient. The aim of this study was to compare the accuracy of the planned implant positioning of a novel image-less robotic technique with an established navigated technique (NTKA). METHOD: The study is a retrospective analysis of prospectively collected data that compared the implant positioning and lower-limb alignment of 86 image-less RTKA with 86 image-less NTKA. Radiographic analysis was performed to evaluate the lower-limb overall alignment, femoral and tibial components positioning in the coronal and sagittal planes. Outliers were evaluated with a cutoff of ± 3°. RESULTS: No difference was noted between the two groups for radiographic outliers within ± 3° from neutral (p = 0.098). The mean hip-knee-ankle angle deviation from target was 1.3° in the RTKA group compared to 1.9° in the NTKA (p < 0.001). Femoral sagittal deviation (femoral component flexion) was smaller in the RTKA group (0.9° vs 1.9°; p < 0.001). Similarly, tibial coronal deviation (0.8° vs 1.5°; p < 0.001) and tibial sagittal deviation (tibial slope) were smaller in the RTKA group compared to the NTKA group (0.9° vs 1.7°; p < 0.001). CONCLUSIONS: The RTKA group reported a substantial and significant reduced error from the planned target angles for both tibial and femoral components. No difference in terms of radiographic outliers was noted between navigation and robotic assistance.

Anterior cruciate ligament injuries in female athletes.

The anterior cruciate ligament (ACL) is frequently injured in elite athletes, with females up to eight times more likely to suffer an ACL tear than males. Biomechanical and hormonal factors have been thoroughly investigated; however, there remain unknown factors that need investigation. The mechanism of injury differs between males and females, and anatomical differences contribute significantly to the increased risk in females. Hormonal factors, both endogenous and exogenous, play a role in ACL laxity and may modify the risk of injury. However, data are still limited, and research involving oral contraceptives is potentially associated with methodological and ethical problems. Such characteristics can also influence the outcome after ACL reconstruction, with higher failure rates in females linked to a smaller diameter of the graft, especially in athletes aged < 21 years. The addition of a lateral extra-articular tenodesis can improve the outcomes after ACL reconstruction and reduce the risk of failure, and it should be routinely considered in young elite athletes. Sex-specific environmental differences can also contribute to the increased risk of injury, with more limited access to and availablility of advanced training facilities for female athletes. In addition, football kits are designed for male players, and increased attention should be focused on improving the quality of pitches, as female leagues usually play the day after male leagues. The kit, including boots, the length of studs, and the footballs themselves, should be tailored to the needs and body shapes of female athletes. Specific physiotherapy programmes and training protocols have yielded remarkable results in reducing the risk of injury, and these should be extended to school-age athletes. Finally, psychological factors should not be overlooked, with females' greater fear of re-injury and lack of confidence in their knee compromising their return to sport after ACL injury. Both intrinsic and extrinsic factors should be recognized and addressed to optimize the training programmes which are designed to prevent injury, and improve our understanding of these injuries.

Use of topical vancomycin powder in total joint arthroplasty: Why the current literature is inconsistent?

Periprosthetic joint infection (PJI) is a rare but terrible complication in hip and knee arthroplasty, and the use of topical vancomycin powder (VP) has been investigated as a tool to potentially reduce its incidence. However, there remains no consensus on its efficacy. Therefore, the aim of this review is to provide an overview on the application of topical vancomycin in orthopaedic surgery focusing on the recent evidence and results in total joint arthroplasty. Several systematic reviews and meta-analyses on topical VP in hip and knee arthroplasty have been recently published reporting sometimes conflicting results. Apart from all being limited by the quality of the included studies (mostly level III and IV), confounding variables are often included potentially leading to biased conclusions. If taken into consideration the exclusive use of VP in isolation, the available data, although very limited, suggest that it does not reduce the infection rate in routine primary hip and knee arthroplasty. Therefore, we still cannot advise for a routinary application. A properly powered randomized-controlled trial would be necessary to clarify the role of VP in hip and knee arthroplasty. Based on the analysis of the current evidence, the use of topical VP appears to be safe when used locally in terms of systemic adverse reactions, hence, if proven to be effective, it could bring great benefits due to its low cost and accessibility.

Predictive Value of the C-Reactive Protein to Albumin Ratio in 30-Day Mortality after Hip Fracture in Elderly Population: A Retrospective Observational Cohort Study.

BACKGROUND: C-reactive protein (CRP) to Albumin ratio (CAR) has been used in multiple clinical settings to predict early mortality. However, there is a lack of evidence on the predictive role of CAR in 30-day mortality after a hip fracture. The purpose of this study was to establish a potential association between CAR and 30-day mortality and to assess if the CAR Receiving Operating Characteristics curve (ROC) can be a reliable predictor of early mortality. METHODS: We retrospectively reviewed the charts of 676 patients (>65 years) treated for hip fracture between 2006 and 2018. All hip fractures were included. Treatment strategies included closed reduction and internal fixation, open reduction and internal fixation, hemiarthroplasty, or total joint arthroplasty. Statistical analysis included T-test, Pearson correlation for CAR and other markers, ROC curves and area under the curve, Youden Model, and Odds Ratio. RESULTS: The 30-day mortality rate analysis showed that higher preoperative levels of CAR were associated with higher early mortality. When analyzing the area under the ROC curve (AUROC) for 30-day mortality, the reported value was 0.816. The point of the ROC curve corresponding to 14.72 was considered a cut-off with a specificity of 87% and a sensibility of 40.8%. When analyzing values higher than 14.72, the 30-day mortality rate was 17.9%, whilst, for values lower than 14.72, the 30-day mortality rate was 1.8%. CONCLUSIONS: Patients older than 65 years affected by a hip fracture with increased preoperative levels of CAR are associated with higher 30-day mortality. Despite a moderate sensibility, considering the low cost and the predictivity of CAR, it should be considered a standard predictive marker.

Metal-on-Metal Hips: Ten-Year Clinical and Radiographic Outcomes of the ADEPT Metal-on-Metal Hip Resurfacing and Modular Total Hip Arthroplasty.

BACKGROUND: The aim of this study is to update the 10-year follow-up survivorship and metal ions levels of a cohort of metal-on-metal (MoM) hip resurfacing (HR) and large-diameter-head (LDH) total hip arthroplasty (THA). METHODS: The study is a retrospective analysis of prospectively collected data that compared the outcomes of 24 MoM HR (21 patients) and 15 (11 patients) modular LHD MoM THA at >10 years follow-up. Baseline characteristics as well as intraoperative and postoperative information were collected, including complications, revisions, clinical and radiographic outcomes, and serum metal ions level (Cobalt, Chromium). Metal ion levels were compared using a two-tailed unpaired t-test and Wilcoxon signed-rank test (jamovi v2.3.3.0, Sydney, NSW, AU). RESULTS: No significant differences were detected in gender, BMI, and ASA score between the two groups. Patients in the modular THA group were significantly older (57 years vs. 46 years; p < 0.05). The HR overall survivorship was 91.7% (22 of 24 hips) with survivorship from implant failure and/or aseptic loosening and/or metal debris related 100% of problems. The modular THA overall survivorship was 86.7% (13 of 15 hips) with survivorship from implant aseptic loosening and metal ions complications of 93.4% (14 of 15 hips). No significant difference was noted when comparing clinical outcomes. Metal ions were significantly lower in the HR group (Co 25.8 nmol/L vs. 89 nmol/L; p < 0.001-Cr 33.5 nmol/L vs. 55.2 nmol/L; p = 0.026). CONCLUSION: Both implants reported excellent and comparable clinical outcomes at >10 years follow-up. The Adept HR reported remarkable survivorship, in line with the registry data, proving once again its reliability in young active males. The modular LDH THA, despite being discontinued, presented higher reliability and a lower failure rate when compared with similar withdrawn MoM implants. Trunnionosis did not appear to be a significant problem in this particular modular design.

The exeter cemented stem provides outstanding long-term fixation and bone load at 15 years follow-up: A systematic review and meta-analysis.

PURPOSE: Since its introduction in 1988, the double-tapered polished Exeter cemented stem has been widely adopted in primary total hip arthroplasty (THA). Despite the results coming from the arthroplasty registries have proven great survivorship, the aim of this study was to dig deeper and describe the modes of failure of the Exeter stem at 15 years follow-up while reporting the clinical and radiographic outcomes. METHODS: A search of PubMed, MEDLINE, and Embase was performed using the Preferred Reporting Items for Systematic Review and Meta-Analyses since inception of database to January 2022. A meta-analysis was performed on stem's failure rates and clinical outcomes using random effects models. Publication bias was assessed with funnel plots. RESULTS: Overall, ten studies met the inclusion criteria with 2167 hips at mean 14.8 ± 4.1 years follow-up. The meta-effect estimate for revision rate for stem-related reasons was 3.8% (CI 95% 2.1-5.6, p < 0.01). The meta-effect for revision rate for stem aseptic loosening (AL) was 0.22% (CI 95% 0-0.4, p = 0.048) and for periprosthetic fracture was 0.6% (CI95% 0.3-0.9, p < 0.001). The meta effect estimate for Oxford Hip Score (OHS) at final follow-up was 32.4 (moderate; CI 95% 23.2-41.6, p <0.001) with and heterogeneity among the studies of I2 0%. Radiolucent lines were reported in 5.5% of cases, with 1.0% of cases (21 hips) reported to be progressive. CONCLUSION: Current evidence suggests that the Exeter cemented stem not only has proven long-term outstanding reliability with a revision rate of 3.8%, but also incredibly low revision rates for AL (0.22%) and periprosthetic fracture (0.6%). It is suitable for a variety of indications, and the consistent radiological appearances indicate durable fixation and load transmission while being associated with a remarkably low stem-related complication rate.

Tantalum Cones for Severe Bone Defects in Revision Knee Arthroplasty: A Minimum 10-Year Follow-Up.

BACKGROUND: Two-to 6-year results of reconstruction of severe bone defects in revision total knee arthroplasty (TKA) with highly porous tantalum cones have been encouraging, but 10-year follow-up is lacking. The purpose of this study was to determine the minimum 10-year results of tantalum cones in revision TKA. METHODS: From 2005 to 2010, 30 consecutive patients (30 knees) underwent revision TKA with the use of cones. All patients were followed clinically and radiographically for a minimum of 10 years. A total of 42 cones (25 tibial and 17 femoral) were used to reconstruct massive bone defects classified as Anderson Orthopaedic Research Institute Types 2A (10), 2B (12), and 3 (19). The mean age of the patients was 73 years (range, 55 to 84) at the time of revision. The indication for the revision included aseptic loosening (15 patients) and second-stage reimplantation for deep infection (15 patients). Six patients were lost to follow-up. RESULTS: In total, 6 cones had to be revised. Minimum 10-year cone survivorship for any reason was 81% (25 of 31 cones). With cone revision for aseptic loosening as the end point, survivorship was 96% (30 of 31). No evidence of loosening or migration of any implant was noted on the most recent radiographs. CONCLUSION: Metaphyseal fixation with tantalum cones in revision TKA demonstrated excellent survivorship and fixation at a minimum follow-up of 10 years. This type of metaphyseal reconstruction can be a durable option for revision TKA in patients who have massive bone defects.