AQbD based green UPLC method to determine mycophenolate mofetil impurities and Identification of degradation products by QToF LCMS.

We report an ideal method for quantifying impurities in mycophenolate mofetil drug substances and their oral suspension preparations. We developed a systematic and eco-friendly analytical approach utilizing quality by design (QbD) and green chemistry principles. Initially, the critical method parameters (CMPs) were screened using a D-optimal design. The robust final method conditions were optimized using a systematic central composite design (CCD). Through graphical and numerical optimization, the protocol conditions were augmented. The pH of mobile phase buffer (25 mM KH2PO4) (MP-A), initial gradient composition (% MP-A), flow rate (mL min-1), and column oven temperatures (°C) are 4.05, 87, 0.4, and 30, respectively. The best possible separation between the critical pairs was achieved while using the Waters Acquity UPLC BEH C18 (100 × 2.1) mm, 1.7 µm analytical column. A mixture of water and acetonitrile in the ratio of 30:70 (v/v) was used as mobile phase-B for the gradient elution. The analytical method was validated in agreement with ICH and USP guidelines. The specificity results revealed that no peaks interfered with the impurities and MPM. The mean recovery of the impurities ranged between 96.2 and 102.7%, and the linearity results r > 0.999 across the range of LOQ - 150%. The precision results (%RSD) ranged between 0.8 and 4.5%. The degradation products formed during the base-induced degradation were identified as isomers of mycophenolic acid and sorbitol esters using Q-ToF LC-MS and their molecular and fragment ion peaks. The developed method eco-friendliness and greenness were assessed using analytical greenness (AGREE), green analytical procedure index (GAPI), and analytical eco score, and found it is green.

Implementation of analytical quality by design and green chemistry principles to develop an ultra-high performance liquid chromatography method for the determination of Fluocinolone Acetonide impurities from its drug substance and topical oil formulations.

An anti-inflammatory skin condition is treated with fluocinolone acetonide (FLA), a synthetic corticoid. The current study aims to develop a stability-indicating UPLC method for the determination of impurities present in fluocinolone acetonide and its topical oil formulation. The method development was performed by implementing Analytical Quality by Design (AQbD) and green chemistry principles. A detailed risk assessment was conducted based on the cause-and-effect relationship. d-optimal split-plot design was employed to screen the critical method parameters (CMPs). The central composite design (CCD) was employed to optimize the final method conditions. p-values for the model and lack of fit were <0.0001 and >0.05, respectively, which indicates the best fit statistical model for the studied responses (peak resolutions R1 - R5). The critical method attributes (CMAs) and CMPs such as the ratio of ACN: Water in mobile phase-B as 600:400 (v/v), the ratio of mobile phase-A & B in initial gradient program as 60:40, flow rate as 0.3 mL min-1, and column oven temperature as 50 °C were optimized from the CCD. The best possible separation among all components was achieved with a gradient elution using Waters Acquity UPLC HSS C18, 100 mm × 2.1 mm, 1.8 µm analytical column. The optimized gradient program is time (min)/%B: 0.0/40, 1.5/40, 6.0/60, 8.0/70, 9.0/80, 12.0/100, 15.0/100, 15.1/40 & 18.0/40. Optimization of diluent is highly critical for any oil-based formulations. The experimental results show that acetonitrile is the most suitable diluent for the current study. The method validation was executed in compliance with ICH and USP 〈1225〉 guidelines. Mean recovery of the impurities ranged between 95.7 and 105.7%, the correlation coefficient(r) was> 0.999, the RSD values (n = 6) ranged between 0.9 - 3.2% across the range for LOQ - 150% levels. The peaks from the specificity study did not interfere with the known and active analyte peaks. The major degradation products were identified as Imp-C, B, and A, and established their degradation pathways from FLA based on the stress studies. The method greenness was evaluated using GAPI, AGREE and analytical eco scale and found that the method is green.

Development and validation of rapid ultra high performance liquid chromatography with tandem mass spectroscopic method for the quantification of N-nitrosodimethyl amine and N-nitrosodiethyl amine in sitagliptin and metformin hydrochloride immediate and extended-release formulations.

A simple, effective LC-MS based method is developed and validated to determine N-nitrosodimethylamine and N-nitrosodiethylamine in pharmaceutical formulations of Sitagliptin and Metformin hydrochloride combination dosage forms. Atlantis T3 (100 × 3 mm, 3 µm) column, eluent-A (0.1% formic acid in water), and eluent-B (0.1% formic acid in methanol) were used to achieve chromatographic separation. A gradient program time (min)/%B: 0.01/3, 2/3, 4/55, 5/55, 5.5/90, 6.0/90, 6.5/3, and 7/3, and column flow rate: 0.75 mL/min was employed. The column oven and auto sample cooler temperatures were 40°C and 10°C, respectively. Atmospheric Pressure Ionisation positive mode with corona discharge potential as 4.0 V, drying gas (N2 ) flow as 110 mL/min, and nebulizer gas (N2 ) flow as 350 mL/min. Employing PerkinElmer triple quadrupole mass spectrometer, QSight 200 series, the source temperature was 450°C, and hot surface-induced desolvation temperature was 250°C. Under optimized conditions, diluent-1 and diluent-2 offered better recovery and improved peak shapes. The required method sensitivity of nitrosodimethylamine (LOQ 0.74 ng/mL) and nitrosodiethylamine (LOQ 0.37 ng/mL) for the nitrosamine impurities were achieved using an optimized test concentration of Metformin hydrochloride at 45.7 mg/mL.

A validated stability-indicating reversed-phase-HPLC method for dipyridamole in the presence of degradation products and its process-related impurities in pharmaceutical dosage forms.

In this study, we developed and validated a method to determine dipyridamole-related impurities in pharmaceutical dosage forms using the reversed-phase-HPLC technique. All impurities were separated on a YMC pack C8 (150 mm × 4.6 mm, 3.0 µm) analytical column using a suitable mobile phase. Mobile phase A was 10 mM concentration of phosphate buffer (pH adjusted to 4.7 by adding diluted orthophosphoric acid) and mobile phase B was buffer:acetonitrile:methanol (at the ratio of 30:40:30 v/v). The optimized chromatographic conditions used in the experiment were as follows: flow rate, 1.0 mL/min; injection volume, 10 µL and column temperature, 35°C. Chromatographic detection was performed at 295 nm. The stressed samples were analyzed for degradation under acidic, basic, peroxide, water hydrolysis, and physical degradation conditions. The proposed method was validated according to International Conference on Harmonization (ICH) guidelines, and found to be specific, linear, accurate and have a robust stability-indicating nature. The method showed excellent linearity from limit of quantification (LOQ) to 150% level of concentrations for all impurities. The correlation coefficient (r2 ) for all impurities was between 0.995 and 0.999. The recovery study was performed from LOQ to 150% level concentrations, with mean recovery values between 92.9% and 103.2%, respectively. The developed method can be used to determine dipyridamole and its relative impurities. The degradation and validated study results indicate its stability-indicating nature. Therefore, the method can be used in pharmaceutical research and development and quality control departments.

Development and validation of a stability-indicating UPLC method for the determination of olmesartan medoxomil, amlodipine and hydrochlorothiazide degradation impurities in their triple-combination dosage form using factorial design of experiments.

The current work describes the development and validation of a stability-indicating UPLC method for the determination of olmesaratan medoxomil (OLM), amlodipine besylate (AMB), hydrochlorothiazide (HCT) and their degradation products in the triple-combination tablet dosage form. The separation was achieved using a Zorbax Eclipse plus C8 RRHD (100 mm × 3.0 mm), 1.8 µm column with gradient elution of mobile phase A containing 0.02 m of sodium phosphate buffer (pH 3.35) and mobile phase B as acetonitrile and water (90:10, v/v). The detector signal was monitored at UV 250 nm. Analytical performance of the optimized UPLC method was validated as per International Conference on Harmonization guidelines. The linearity ranges for OLM, AMB and HCT were 0.59-240, 0.30-60 and 0.37-150 µg/ml, respectively, with correlation coefficients >0.999. The dosage form was subjected to forced-degradation conditions of neutral, acidic and alkaline hydrolysis, oxidation and thermal and photodegradation. The method was proved to be stability indicating by demonstrating the specificity of the drugs from degradation products. The robustness of the method was evaluated through a two-level, three-factorial design with a multivariate approach. Statistical data analysis with best model fit P-value < 0.05 from an ANOVA test indicated that the influence of individual factors is relatively higher than the interaction effects. The method is useful for the analysis of drug products.

Low-level determination of 4-chlorobutyl-(S)-[4-chloro-2-(4-cyclopropyl-1,1,1-trifluoro-2-hydroxy-but-3yn-2-yl)phenyl] carbamate (4-CTHC) in efavirenz drug substance by LC-MS.

A rapid, simple, sensitive, and selective liquid chromatography-tandem mass spectrometry (LC-MS) test method was developed and validated for the trace level determination of 4-chlorobutyl-(S)-[4-chloro-2-(4-cyclopropyl-1,1,1-trifluoro-2-hydroxy-but-3yn-2-yl)phenyl] carbamate (4-CTHC). 4-CTHC is a potential genotoxic impurity in efavirenz drug substance and the acceptable level is 2.5 µg ml-1 with respect to analyte concentration according to ICH M7(R1) Multidisciplinary Guidelines M7(R1). The LC-MS/MS analysis of 4-CTHC impurity was carried out on a Kinetex C18 (150 × 4.6 mm, 5.0 µm) column. In this test procedure, the mobile phase was prepared with buffer (0.1% formic acid in water) and acetonitrile in the ratio of 1:3 (v/v). The method set flow rate was 0.4 ml min-1 . The method was developed with a short run time of <10 min. Selective ion monitoring acquisition mode and negative polarity electrospray ionization mode were used as an MS method to quantify genotoxic impurities at 422.25 Da. The method showed linearity in a range of 0.64-3.71 µg ml-1 with a correlation coefficient of 0.9992. The RSD for intra-day and inter-day precision was found to be <5%. The method's accuracy was in the range of 106.5-112.4% for the genotoxic impurity of 4-CTHC. The procedure was validated as per the current ICH Q2 (R1) guidelines and proved suitable for stability testing in the quality control laboratory for pharmaceutical preparations.

Development and validation of LC-MS method for the determination of heptaethylene glycol monomethyl ether in benzonatate bulk drugs.

A simple and isocratic reverse-phase liquid chromatography with mass spectrometric method has been developed and validated for the determination of heptaethylene glycol monomethyl ether in benzonatate drug substance. Benzonatate is an oral antitussive drug used to relieve and suppress cough in patients older than 10 years. The presence of residual heptaethylene glycol monomethyl ether in the benzonatate drug substance affects the safety, strength, purity and quality of the drug substance. The subject compound separation was achieved using 0.1% formic acid and acetonitrile (50:50 v/v) at a flow rate of 0.3 ml/min. The Suplex PKB-100 250 × 4.6 mm, 5 µm LC column was used for a better peak shape. Detection was carried out at an m/z value of 341. The linearity curve showed a correlation of coefficient of >0.999. The precision and intermediate precision (RSD) were <7.30. The accuracy values were >90% for all levels. The developed method was validated as per International Conference on Harmonization guidelines and found to be a novel, specific and sensitive analytical method for determination of components of interest.

Oxidative degradation profile studies of tavaborole by a validated stability indicating RP-UPLC method: Isolation and characterization of novel degradant using 2D-NMR and HRMS.

The current research work reports a study on the degradation profile of tavaborole, which is an oxaborole antifungal drug used to treat infections in the toenails. This work also reports the chemical stability of tavaborole in different stress conditions along with the isolation and characterization of degradation products by high-resolution mass spectrometry and two-dimensional nuclear magnetic resonance techniques. A sensitive and reproducible stability-indicating ultra-performance liquid chromatography method was developed and validated for quantification of tavaborole bulk drug in the presence of degradation products. Significant degradation was observed during oxidative stress conditions using H2 O2 . It was observed that the drug was highly unstable under oxidation stress conditions and thus degradation profiles with various oxidizing reagents were studied. One unknown impurity (DP-1) was formed during peroxide degradation, which was isolated by reverse-phase preparative chromatography. The structure of this degradant was characterized by high-resolution mass spectrometry and multidimensional nuclear magnetic resonance techniques. The structure of this novel impurity DP-1 was identified as [4-fluoro-2-(hydroxymethyl)phenol], which was not reported as a degradant in the literature. An Acquity BEH C18 , 100 × 2.1 mm, 1.7 µm column was used to achieve the desired separation within a shorter runtime of 4.0 min. The method was validated for specificity, precision, linearity and accuracy over the concentration range of 5.0-400 µg ml-1 (r2 -0.9999) and limit of quantitation 5.0 µg ml-1 . This method is compatible with LCMS analysis which enables to identify the unknown impurities formed in the process.

Novel reversed-phase HPLC method for simultaneous determination of ethynodiol diacetate (EDA)/ethinyl estradiol (EE) in pharmaceutical dosage form.

Ethynodiol diacetate (EDA) and ethinyl estradiol (EE) tablets are indicated to prevent pregnancy in women who use oral contraceptives as a contraception method. EDA and EE were separated by reversed-phase HPLC using Agilent ZORBAX SB-Phenyl column, 4.6 mm × 15 cm, 5 µm, using a gradient mixture of acetonitrile and Milli-Q water as mobile phase. The linearity and recovery were found in the range of 0.025-0.25 mg/mL and 0.05-0.18 mg/mL for EDA and 0.001-0.01 mg/mL and 0.002-0.007 mg/mL for EE, respectively. The method is validated according to the regulatory guidelines concerning system suitability, specificity, repeatability, recovery, linearity, robustness, and stability of the sample solution.

Stability Indicating LC Method Development for Hydroxychloroquine Sulfate Impurities as Available for Treatment of COVID-19 and Evaluation of Risk Assessment Prior to Method Validation by Quality by Design Approach.

A quality by design-based stability indicating HPLC method has been developed for hydroxychloroquine sulfate impurities. The optimized HPLC method can detect and quantify the hydroxychloroquine sulfate and related organic impurities in pharmaceutical solid oral dosage forms. Nowadays, for the quantification of impurities in drug products demands more comprehensive way of analytical method development. The quality by design approach allows the assessment of different analytical parameters and their effects with minimum number of experiments. A highly sensitive and stability indicating RP-HPLC method was developed and evaluated the risk assessment prior to method validation. The chromatographic separation was achieved with X-terra phenyl column (250 × 4.6 mm, 5 µm) using phosphate buffer (0.3 M and pH 2.5). The gradient method flow rate was 1.5 mL min-1 and UV detection was made at 220 nm. The calibration curve of hydroxychloroquine sulfate and related impurities were linear from LOQ to 150% and correlation coefficient was found more than 0.999. The precision and intermediate precision % RSD values were found less than 2.0. In all forced degradation conditions, the purity angle of HCQ was found less than purity threshold. The optimized method found to be specific, accurate, rugged, and robust for determination of hydroxychloroquine sulfate impurities in the solid oral dosage forms. Finally, the method was applied successfully in quality control lab for stability analysis.