In vitro metabolic profiling of new synthetic cannabinoids, ADB-FUBIATA, AFUBIATA, CH-FUBIATA, and CH-PIATA.

In the recreational drug market, synthetic cannabinoids with a new acetamide linker structure emerged, most likely to circumvent the law. As the knowledge of drug metabolites is vital for proving drug consumption, the phase I metabolism of the newly emerging cannabinoids, ADB-FUBIATA, AFUBIATA, CH-FUBIATA, and CH-PIATA, was investigated. Each drug (10 µmol/L) was incubated with human liver microsomes for 1 h, and the samples, after dilution, were analyzed by liquid chromatography-high-resolution mass spectrometry. All drugs were metabolized via hydroxylation and N-dealkylation, while AFUBIATA and CH-PIATA additionally underwent ketone formation. The metabolites AF7 (hydroxylated at the indole/adjacent methylene) of ADB-FUBIATA, A16 (hydroxylated at the adamantane) of AFUBIATA, CF15 (hydroxylated at the cyclohexane) of CH-FUBIATA, and CP9 (hydroxylated at the pentane) of CH-PIATA were the most abundant metabolites by considering the peak areas on the chromatograms, and are recommended for urinalysis. The structure-metabolism relationship was also discussed, which generally agreed well with previously reported metabolic pathways of other synthetic cannabinoids. However, the preferred hydroxylation site of ADB-FUBIATA, the indole/adjacent methylene, clearly differed from that of ADB-FUBICA, the 3,3-dimethylbutanamide moiety, despite their structures differing only by a methylene group, emphasizing that metabolic predictions of new drugs should not replace in vitro experimental analyses, albeit helpful.

Systematic In Vitro Metabolic Profiling of the OXIZID Synthetic Cannabinoids BZO-4en-POXIZID, BZO-POXIZID, 5F-BZO-POXIZID, BZO-HEXOXIZID and BZO-CHMOXIZID.

A new class of synthetic cannabinoids termed OXIZIDs has recently emerged on the recreational drug market. In order to continue the detection of new drugs in biological specimens, the identification of metabolites is essential. The aim of this study was to elucidate the metabolites of BZO-4en-POXIZID produced in human liver microsomes (HLMs) and human hepatocyte incubations and to compare the results with closely related analogs using the same experimental setup. Each drug was incubated for 1 h in HLM and BZO-4en-POXIZID was also incubated in human hepatocytes for up to 3 h. Subsequently, the incubates were analyzed by liquid chromatography-high-resolution mass spectrometry. BZO-4en-POXIZID metabolites were obtained in the incubation with HLMs and human hepatocytes, via the metabolic pathways of dihydrodiol formation, hydroxylation, reduction of the alkene bond and glucuronidation. The major metabolic pathway was found to be dihydrodiol formation at the pentenyl tail moiety. BZO-POXIZID, 5 F-BZO-POXIZID, BZO-HEXOXIZID and BZO-CHMOXIZID underwent similar metabolism to those reported in the literature, via the metabolic pathways of N-dealkylation, hydroxylation, ketone formation and oxidative defluorination (to alcohol or carboxylic acid). The results suggest that OXIZIDs are mainly metabolized at the N-alkyl moiety and the major metabolic pathways are hydroxylation when the N-alkyl moiety is a simple hydrocarbon, whereas functional-group-specific pathways (dihydrodiol formation and oxidative defluorination) are preferred when the moiety contains specific functional groups (alkene or fluoro), as has been observed for other synthetic cannabinoids. The major metabolites generated via these major metabolic pathways should serve as useful analytical targets for urine analysis. Furthermore, the higher abundance of glucuronidated metabolite suggests that enzymatic hydrolysis of glucuronides may be necessary for urine analysis to increase phase I metabolite concentration and improve detection.

Forensic Discrimination of Drug Powder Based on Drug Mixing Condition Determined Using Micro Fourier Transform Infrared Spectroscopy.

The quantitative evaluation of the drug mixing condition was conducted for application in the forensic discrimination of drug powders using micro Fourier transform infrared (FT-IR) spectroscopy. Bromhexine hydrochloride (BHCl) and p-hydroxybenzoic acid (PHBA) were used as the simulated drug and additive, respectively. Equal masses of two chemicals were (1) simply mixed, (2) homogenized using agate mortar, or (3) dissolved in methanol and dried, and then (4) homogenized using agate mortar. The mixed powders dispersed on BaF2 plates were subjected to mapping analysis of micro FT-IR spectroscopy using synchrotron radiation (SR) or globar light in transmission mode with aperture sizes of 2.5 x 2.5 and 10 x 10µm2, and x-y scanning steps of 2.5 and 10 µm, respectively. The areas of the vibration bands specific to BHCl (C-N bending) and PHBA (C=O stretching) were converted to the molar contents (CBHCl, CPHBA), and the relative content ratio (RCR: CPHBA/[CBHCl + CPHBA]) was used as one mixing parameter. The resulting two-dimensional distribution map provided the relative spatial localizations of the two species, and frequency histograms with a horizontal axis of RCR were plotted to evaluate the RCR distribution. The percentage frequency of the extreme value in which RCR was 0 or 1 (%EV) was used as one mixing index. After excluding the extreme values, the coefficient of variation (CV) of the RCR distribution was used as another mixing index. The differentiation among four mixing modes could be evaluated from the standpoint of %EV and CV, and the discrimination capacity by SR instrument was superior to that by globe light instrument.

Comparison between human liver microsomes and the fungus Cunninghamella elegans for biotransformation of the synthetic cannabinoid JWH-424 having a bromo-naphthyl moiety analysed by high-resolution mass spectrometry.

PURPOSE: JWH-424, (8-bromo-1-naphthyl)(1-pentyl-1H-indol-3-yl)methanone, is a synthetic cannabinoid, which is a brominated analogue of JWH-018, one of the best-known synthetic cannabinoids. Despite the structural similarity to JWH-018, little is known about JWH-424 including its metabolism. The aim of the study was to compare human liver microsomes (HLM) and the fungus Cunninghamella elegans as the metabolism catalysts for JWH-424 to better understand the characteristic actions of the fungus in the synthetic cannabinoid metabolism. METHODS: JWH-424 was incubated with HLM for 1 h and Cunninghamella elegans for up to 72 h. The HLM incubation mixtures were diluted with methanol and fungal incubation mixtures were extracted with dichloromethane and reconstituted in methanol before analyses by liquid chromatography-high-resolution mass spectrometry (LC-HRMS). RESULTS: HLM incubation resulted in production of ten metabolites through dihydrodiol formation, hydroxylation, and/or ipso substitution of the bromine with a hydroxy group. Fungal incubation led to production of 23 metabolites through carboxylation, dihydrodiol formation, hydroxylation, ketone formation, glucosidation and/or sulfation. CONCLUSIONS: Generally, HLM models give good predictions of human metabolites and structural analogues are metabolised in a similar fashion. However, major hydroxy metabolites produced by HLM were those hydroxylated at naphthalene instead of pentyl moiety, the major site of hydroxylation for JWH-018. Fungal metabolites, on the other hand, had undergone hydroxylation mainly at pentyl moiety. The metabolic disagreement suggests the necessity to verify the human metabolites in authentic urine samples, while H9 and H10 (hydroxynaphthalene), H8 (ipso substitution), F22 (hydroxypentyl), and F17 (dihydroxypentyl) are recommended for monitoring of JWH-424 in urinalysis.

Effects of Machine Washing on the Chromatography Parameters of Polyester Fiber Gel Permeation.

Fiber examination is frequently performed in forensics, and gel permeation chromatography (GPC) is one candidate method for discriminating polyester fibers. Here, the effects of machine washing on weight-average molecular weight (M w), polydispersity index (PDI), and the percentage peak area of cyclic ethylene terephthalate trimer (PPAL) of commercial polyester shirts and manufactured poly(ethylene terephthalate) (PET) yarns were investigated using GPC. GPC was performed using a 1,1,1,3,3,3-hexafluoro-propan-2-ol polymer solubilizer, styrene-divinylbenzene copolymer GPC columns, a chloroform mobile phase, and a 254 nm absorbance monitor. The statistical change in the polyester fibers during machine washing was evaluated by comparing three GPC parameters of the same fiber samples before and after machine washing. Among the commercial polyester shirts examined, the GPC parameters changed significantly after machine washing with a considerable PPAL decrease. In contrast, the GPC parameters of manufactured PET yarns changed significantly with a moderate increase in M w. This work elucidates the change on GPC parameters of polyester fibers by machine washing.