RESUMEN
Data rates in optical fiber networks have increased exponentially over the past decades and core-networks are expected to operate in the peta-bit-per-second regime by 2030. As current single-mode fiber-based transmission systems are reaching their capacity limits, space-division multiplexing has been investigated as a means to increase the per-fiber capacity. Of all space-division multiplexing fibers proposed to date, multi-mode fibers have the highest spatial channel density, as signals traveling in orthogonal fiber modes share the same fiber-core. By combining a high mode-count multi-mode fiber with wideband wavelength-division multiplexing, we report a peta-bit-per-second class transmission demonstration in multi-mode fibers. This was enabled by combining three key technologies: a wideband optical comb-based transmitter to generate highly spectral efficient 64-quadrature-amplitude modulated signals between 1528 nm and 1610 nm wavelength, a broadband mode-multiplexer, based on multi-plane light conversion, and a 15-mode multi-mode fiber with optimized transmission characteristics for wideband operation.
RESUMEN
The local variations of group and phase propagation delays induced by bending and twisting a coupled core three-core fiber are experimentally characterized, for the first time, to the best of our knowledge, along the fiber length, with millimeter-scale spatial resolution. The measurements are performed by means of spectral correlation analysis on the fiber's Rayleigh backscattered signal, enabling for a distributed measurement of the perturbation effects along the fiber length. A mathematical model validating the experimental results is also reported.
RESUMEN
Optical vector network analyzers (OVNAs) based on swept-wavelength interferometry are applied widely in optical metrology and sensing to measure the complex transfer functions of optical components, devices, and fibers. Phase noise from laser sweep nonlinearities degrades the measurement quality as the distance increases and limits the usage of the OVNA in characterizing systems with long impulse responses as required in space-division multiplexing links with a high mode count or in the presence of large modal differential group delay (DGD). In this Letter, we use a densely distributed broadband ultra-weak fiber Bragg grating array to directly measure the distortion due to phase noise at a 5-m increment up to 400 m and use this measured data to directly eliminate the distortion. We experimentally extend the measurement range of the swept-wavelength OVNA over 400 m and successfully characterize a 2-km six-mode multimode fiber link with an accumulated impulse response as wide as 20 ns.
RESUMEN
Fiber-optical networks are a crucial telecommunication infrastructure in society. Wavelength division multiplexing allows for transmitting parallel data streams over the fiber bandwidth, and coherent detection enables the use of sophisticated modulation formats and electronic compensation of signal impairments. Optical frequency combs can replace the multiple lasers used for the different wavelength channels. Beyond multiplexing, it has been suggested that the broadband phase coherence of frequency combs could simplify the receiver scheme by performing joint reception and processing of several wavelength channels, but an experimental validation in a fiber transmission experiment remains elusive. Here we demonstrate and quantify joint reception and processing of several wavelength channels in a full transmission system. We demonstrate two joint processing schemes; one that reduces the phase-tracking complexity and one that increases the transmission performance.
RESUMEN
Combining reprogrammable optical networks with complementary metal-oxide semiconductor (CMOS) electronics is expected to provide a platform for technological developments in on-chip integrated optoelectronics. We demonstrate how opto-electro-mechanical effects in micrometer-scale hybrid photonic-plasmonic structures enable light switching under CMOS voltages and low optical losses (0.1 decibel). Rapid (for example, tens of nanoseconds) switching is achieved by an electrostatic, nanometer-scale perturbation of a thin, and thus low-mass, gold membrane that forms an air-gap hybrid photonic-plasmonic waveguide. Confinement of the plasmonic portion of the light to the variable-height air gap yields a strong opto-electro-mechanical effect, while photonic confinement of the rest of the light minimizes optical losses. The demonstrated hybrid architecture provides a route to develop applications for CMOS-integrated, reprogrammable optical systems such as optical neural networks for deep learning.
RESUMEN
Phase-sensitive optical parametric amplifiers (PSAs) can provide low-noise optical amplification while simultaneously mitigating nonlinear distortions caused by the Kerr effect. However, nonlinearity mitigation using PSAs is affected by link parameters, and imperfect link design results in residual nonlinear distortions. In this paper, we use first-order perturbation theory to describe these residual nonlinear distortions, and develop a way to mitigate them using a modified third-order Volterra nonlinear equalizer (VNLE) in the receiver. Using numerical simulations, we show that our proposed VNLE reduces the residual nonlinear distortions in links using in-line PSAs for several combinations of symbol rates and modulation formats, and can increase the maximum transmission distance by up to 80%. We also perform a proof-of-concept experiment and confirm that our modified VNLE can mitigate the residual nonlinear distortions on a 10-Gbaud 16QAM signal after transmission through a 10×80-km link with in-line PSAs.
RESUMEN
We present a low-complexity fully pilot-based digital signal processing (DSP) chain designed for high spectral efficiency optical transmission systems. We study the performance of the individual pilot algorithms in simulations before demonstrating transmission of a 51×24 Gbaud PM-64QAM superchannel over distances reaching 1000 km. We present an overhead optimization technique using the system achievable information rate to find the optimal balance between increased performance and throughput reduction from adding additional DSP pilots. Using the optimal overhead of 2.4%, we report 9.3 (8.3) bits/s/Hz spectral efficiency, or equivalently 11.9 (10.6) Tb/s superchannel throughput, after 480 (960) km of transmission over 80 km spans with EDFA-only amplification. Moreover, we show that the optimum overhead depends only weakly on transmission distance, concluding that back-to-back optimization is sufficient for all studied distances. Our results show that pilot-based DSP combined with overhead optimization can increase the robustness and performance of systems using advanced modulation formats while still maintaining state-of-the-art spectral efficiency and multi-Tb/s throughput.
RESUMEN
Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advanced coherent communications since they display unusually high power-conversion efficiency. Here, we report the first coherent-transmission experiments using 64-quadrature amplitude modulation encoded onto the frequency lines of a dark-pulse comb. The high conversion efficiency of the comb enables transmitted optical signal-to-noise ratios above 33 dB, while maintaining a laser pump power level compatible with state-of-the-art hybrid silicon lasers.
RESUMEN
Microresonator-based frequency combs are strong contenders as light sources for wavelength-division multiplexing (WDM). Recent experiments have shown the potential of microresonator combs for replacing a multitude of WDM lasers with a single laser-pumped device. Previous demonstrations have however focused on short-distance few-span links reaching an impressive throughput at the expense of transmission distance. Here we report the first long-haul coherent communication demonstration using a microresonator-based comb source. We modulated polarization multiplexed (PM) quadrature phase-shift keying-data onto the comb lines allowing transmission over more than 6300 km in a single-mode fiber. In a second experiment, we reached beyond 700 km with the PM 16 quadrature amplitude modulation format. To the best of our knowledge, these results represent the longest fiber transmission ever achieved using an integrated comb source.
RESUMEN
We demonstrate and characterize an all-optical self-homodyne (SH) frequency superchannel enabled by comb regeneration at the receiver. In order to generate the superchannel, we use a frequency comb with 26 carriers spaced by 25 GHz at the transmitter, from which 24 carriers are modulated with polarization-multiplexed 32 quadrature amplitude modulation (PM 32-QAM) data. To enable comb regeneration at the receiver side, the two central carriers remain unmodulated. High fidelity comb regeneration is achieved by filtering the two unmodulated carriers with an approximately 25 MHz wide optical filter based on Brillouin amplification before a parametric mixer. The carriers from the regenerated comb are then used as local oscillator for SH detection. We demonstrate that all 24 carriers can be detected with an optical signal-to-noise ratio (OSNR) penalty lower than 2.5 dB in a back-to-back scenario. We also demonstrate that the whole superchannel can be transmitted through 120 km of single-mode fiber (SMF) and be detected with bit-error rate (BER) below 0.015.
