Recovery of Valuable Materials from End-of-Life Photovoltaic Solar Panels.

The disposal of end-of-life (EOL) photovoltaic solar panels has become a relevant environmental issue as they are considered to be a hazardous electronic waste. On the other hand, enormous benefits are achieved from recovering valuable metals and materials from such waste. Eventually, physical and chemical processing will become the most important stages during the recycling process. A physical treatment including crushing, grinding, and screening was achieved, and it was observed that a fine fraction of -0.25 mm had the maximum percentage of the required materials. Moreover, the optimum chemical treatment conditions were adjusted to reach the maximum recovery of silver, aluminum, and silicon. The synthesis of silicon oxide, silver oxide, alunite, and K-Alum from leachant solution was performed through a simple route. The structural and morphological properties of the prepared materials were defined by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FESEM).

New Materials and Technologies for Durability and Conservation of Building Heritage.

The increase in concrete structures' durability is a milestone to improve the sustainability of buildings and infrastructures. In order to ensure a prolonged service life, it is necessary to detect the deterioration of materials by means of monitoring systems aimed at evaluating not only the penetration of aggressive substances into concrete but also the corrosion of carbon-steel reinforcement. Therefore, proper data collection makes it possible to plan suitable restoration works which can be carried out with traditional or innovative techniques and materials. This work focuses on building heritage and it highlights the most recent findings for the conservation and restoration of reinforced concrete structures and masonry buildings.

Recovery of Waste Materials: Technological Research and Industrial Scale-Up.

An increase in population, booming economy, rapid urbanization and the rise in living standards have exponentially accelerated waste production [...].

Effect of Acid Leaching Pre-Treatment on Gold Extraction from Printed Circuit Boards of Spent Mobile Phones.

The effect of a preliminary acid leaching for the recovery of gold by thiourea from printed circuit boards (PCBs) of spent mobile phones, was investigated. Preliminary leaching is aimed to recover copper in the leachate that would compete with gold in the successive leaching of the residue with thiourea, thus preventing the formation of the gold-thiourea complex. Two hydrometallurgical routes were tested for the recovery of copper first, and gold after. The first one was based on a two-step leaching that utilizes sulfuric acid and hydrogen peroxide in the preliminary leaching and then thiourea for the recovery of gold in the successive leaching: A copper and gold recovery of 81% and 79% were obtained, respectively. In the second route, nitric acid was used: 100% of copper was recovered in the leachate and 85% of gold in the thiourea successive leaching. The main operative parameters, namely thiourea and ferric sulphate concentrations, leach time, liquid-solid ratio, and temperature were studied according to a factorial plan strategy. A flowsheet of the processes was proposed, and a mass balance of both routes was obtained. Finally, qualitative considerations on the technical and economic feasibility of the different routes were made.

Binders alternative to Portland cement and waste management for sustainable construction-part 1.

This review presents "a state of the art" report on sustainability in construction materials. The authors propose different solutions to make the concrete industry more environmentally friendly in order to reduce greenhouse gases emissions and consumption of non-renewable resources. Part 1-the present paper-focuses on the use of binders alternative to Portland cement, including sulfoaluminate cements, alkali-activated materials, and geopolymers. Part 2 will be dedicated to traditional Portland-free binders and waste management and recycling in mortar and concrete production.

Binders alternative to Portland cement and waste management for sustainable construction - Part 2.

The paper represents the "state of the art" on sustainability in construction materials. In Part 1 of the paper, issues related to production, microstructures, chemical nature, engineering properties, and durability of mixtures based on binders alternative to Portland cement were presented. This second part of the paper concerns the use of traditional and innovative Portland-free lime-based mortars in the conservation of cultural heritage, and the recycling and management of wastes to reduce consumption of natural resources in the production of construction materials. The latter is one of the main concerns in terms of sustainability since nowadays more than 75% of wastes are disposed of in landfills.

A hydrometallurgical process for the recovery of terbium from fluorescent lamps: Experimental design, optimization of acid leaching process and process analysis.

Terbium and rare earths recovery from fluorescent powders of exhausted lamps by acid leaching with hydrochloric acid was the objective of this study. In order to investigate the factors affecting leaching a series of experiments was performed in according to a full factorial plan with four variables and two levels (42). The factors studied were temperature, concentration of acid, pulp density and leaching time. Experimental conditions of terbium dissolution were optimized by statistical analysis. The results showed that temperature and pulp density were significant with a positive and negative effect, respectively. The empirical mathematical model deducted by experimental data demonstrated that terbium content was completely dissolved under the following conditions: 90 °C, 2 M hydrochloric acid and 5% of pulp density; while when the pulp density was 15% an extraction of 83% could be obtained at 90 °C and 5 M hydrochloric acid. Finally a flow sheet for the recovery of rare earth elements was proposed. The process was tested and simulated by commercial software for the chemical processes. The mass balance of the process was calculated: from 1 ton of initial powder it was possible to obtain around 160 kg of a concentrate of rare earths having a purity of 99%. The main rare earths elements in the final product was yttrium oxide (86.43%) following by cerium oxide (4.11%), lanthanum oxide (3.18%), europium oxide (3.08%) and terbium oxide (2.20%). The estimated total recovery of the rare earths elements was around 70% for yttrium and europium and 80% for the other rare earths.

Production of aggregate from non-metallic automotive shredder residues.

In this paper, the results of an experimentation on the production of granules suitable to be used as aggregates in cementitious or asphalt mixes are presented and discussed. The granules were obtained by granulating the non-metallic fraction of automotive shredder residues. In a preliminary separation step the fluff fraction containing mainly inert and non-metallic materials was sieved and analyzed for the metal content. In the following granulation step, the sieved fraction was mixed with binding materials, fly ash and a densifier agent, to produce granules of 5-30 mm of diameter and up to 1400 kg/m3 of specific weight. The granulation was carried out at room temperature in a rotating tank. Concrete samples prepared using as aggregates the produced granules showed a specific weight up to 1800 kg/m3 and a compressive strength up to about 55% of reference samples prepared using a calcareous aggregate, depending on the fluff content of the mixes, and on the nature of the binder and of the other components used.

Bracciano's Lake waters: an experimental survey on the surface layer pollution.

The chemical and trophic conditions of the surface waters of the lake Bracciano, near Roma, have been investigated all through the year 2005. Electrical conductivity, pH, alkalinity, hardness, total nitrogen, phosphorus content, chloride, fluoride and sulphate ions were measured. The results were compared with similar analyses formerly carried out by different authors, to achieve a right evaluation of the actual quality of the surface waters of the lake Bracciano all over the year 2005.