RESUMEN
OBJECTIVE: Eurythmy Therapy (ET) is a mindfulness oriented therapy developed in the context of anthroposophic medicine. Despite commonly used in practice, it remains unclear whether active participation (Inner Correspondence) during ET can be observed in eurythmy gestures (EGest). So far, no validated peer-report instrument to evaluate EGest exists. METHOD: To validate an 83-item ET peer-report scale, a nested study on a sample of n = 82 breast cancer survivors with cancer-related fatigue was conducted. EGest were evaluated twice, at baseline and at 10-week follow-up, by peer-reports from two separate therapists. Interrater-reliability (IRR) was estimated by Cohen's weighted kappa (κw) across all items. Additionally, reliability-(RA) and principal component analyses (PCA) were conducted. Patients completed two self-report scales: Satisfaction with ET (SET) and Inner Correspondence with the Movement Therapy (ICPH). RESULTS: IRR was greater than or equal (κw ≥ 0.25) for 41 items (49.3%) with a mean weighted kappa of κÌ w = 0.40 (SD = 0.17, range = 0.25-0.85). RA resulted in the exclusion of 25 items with insufficient item-total correlations < 0.40. A PCA with 16 items revealed 3 subscales: 1. Mindfulness in Movement (8 items), 2. Motor Skills (5 items), 3. Walking Pattern (3items) explaining 63.86% of total variance. Internal consistency (Cronbach's alpha) was high for the sum score with α = 0.89 and for the subscales with α = 0.88, 0.86 and 0.84 respectively. Significant small to moderate subscale correlations were found ranging from r = 0.29-0.63 (all p < 0.01). Mindfulness in Movement correlated with Inner Correspondence (r = 0.32) and with Satisfaction with ET (r = - 0.25, both p < 0.05). CONCLUSIONS: The new AART-ASSESS-EuMove is the first consistent and reliable peer-report instrument to evaluate EGest. It shows associations between peer-reported Mindful Movement and patients' self-reported ICPH and SET.
Asunto(s)
Neoplasias de la Mama , Humanos , Femenino , Encuestas y Cuestionarios , Reproducibilidad de los Resultados , Psicometría/métodos , AutoinformeRESUMEN
OBJECTIVE: Anthroposophic painting therapy (APT) is a specific form of art therapy that aims to activate self-healing capacities through painting aquarelles. METHODS: The Anthroposophic Art Therapy Assessment-Paint' (AART-ASSESS-P) was developed to measure pictorial expression and validated in the framework of a comprehensive cohort design study. The validation study examined 68 breast cancer patients with fatigue. Art therapists made pre- and post-assessments of spontaneously drawn water-color paintings with a preliminary version of the AART-ASSESS-P (58 items). Inter-rater reliability (IRR) for the items was examined with Cohen's weighted Kappa (κw). Additionally, a reliability- and factor analysis (FA) were conducted. Convergence criteria were patients' self-report measures: the Satisfaction with Painting Therapy, Inner Correspondence with Painting Therapy and the Self-Regulation Questionnaire. RESULTS: IRR for the items was heterogeneous (κw= 0.09-0.89, Mean κw= 0.40, SDâ¯=â¯0.17). Thirty-six items were excluded due to insufficient IRR and item-total correlation (κw= < 0.30, ρitem-total< 0.30). A FA with 22 items revealed 5 subscales: Shape Development (6 items), Shape Arrangement (6 items), Order and Symmetry (5 items), Color Application (3 items), and Color Quality (2 items) explaining 61% of total variance. Psychometric properties for the AART-ASSESS-P were satisfying with Cronbach's alpha coefficients (rαâ¯=â¯0.60-0.81) across subscales. Due to weak inter-subscale correlations (râ¯=â¯0.18-0.48, p < 0.05) and the ambiguity of face validity a sum-score was not formed. Correlations between subscales and self-reports were small (all p < 0.05). CONCLUSION: The AART-ASSESS-P is the first reliable instrument to measure pictorial expression during APT.
Asunto(s)
Arteterapia , Pinturas , Humanos , Pintura , Psicometría , Reproducibilidad de los Resultados , Encuestas y CuestionariosRESUMEN
OBJECTIVE: The purpose of this in vitro study was to analyze the effect of computer-aided design/computer-aided manufacturing (CAD/CAM) fabrication and sintering procedures on the fracture load of monolithic zirconia crowns with different material thicknesses adhesively seated to methacrylate dies fabricated with stereolithography technology. METHOD: Monolithic zirconia crowns were fabricated from inCoris TZI C material with a chairside CAD/CAM system (CEREC MCXL) comprising three material thicknesses (0.5/1.0/1.5 mm, n=8 each). Two CAD/CAM fabrication procedures (milling, MI; grinding, GR), two chairside sintering procedures (superspeed, SS; speedfire sintering, SF), and one labside sintering procedure (classic, CL) were evaluated. In total, 144 crowns were fabricated. Restorations were adhesively seated to methacrylate dies fabricated with SLA technology. Thermomechanical cycling (TCML) was performed before fracture testing. Loading forces until fracture were registered and statistically analyzed with one-way analysis of variance (ANOVA), post hoc Scheffé test, and three-way ANOVA (α=0.05). RESULTS: Test groups showed statistically significant differences (p<0.05). The highest mean value was found for 1.5-mm crowns of group GR_SF with 3678.6 ± 363.9 N. The lowest mean value was found for group 0.5-mm crowns of group MI_SF with 382.4 ± 30.7 N. There was a significant three-way interaction effect between thickness, sintering, and processing [F(4,126)=9.542; p<0.001; three-way ANOVA, significance level α=0.05]. CONCLUSIONS: CAD/CAM fabrication and sintering procedures influence the maximum loading force of monolithic zirconia crowns with different material thicknesses. A material thickness of 0.5 mm should be considered as a critical thickness for monolithic zirconia crown restorations.
Asunto(s)
Diseño Asistido por Computadora , Circonio , Cerámica , Coronas , Porcelana Dental , Diseño de Prótesis Dental , Ensayo de MaterialesRESUMEN
Objectives Art therapy (ArT) such as mindfulness-oriented painting therapy is increasingly used in psychosomatic, oncological integrative and rehabilitative medicine. Though it remains unknown how ArT works, we hypothesize that an engaged participation with painting ('Inner-Correspondence') contributes to improved symptom scores. In the context of a comprehensive cohort study for breast cancer survivors with cancer-related fatigue, we developed a patient-reported outcome measure to assess 'Inner Correspondence' with painting therapy and conducted a first validation study. Design A 24-item questionnaire on 'Inner Correspondence' (ICPTh) was administered after ten weeks of intervention and at six month followup together with concurrent scales (Inner Correspondence and Peaceful Harmony, Cancer Fatigue Scale, Hospital Anxiety and Depression Scale, Internal Coherence Scale). Statistical assessment included reliability- and factor analyses. Results A total of n = 68 BC (mean age, 58.2 years, SD = 8.7) participated in the preliminary validation study. Exploratory factor analysis revealed a robust 22-item scale with an unambiguous four-factor solution explaining 78% of total variance and the following subsales: 1) therapy congruence and relaxation (11 items), 2) inner development and mood (6 items), 3) artistic skill (3 items) and 4) task congruence (2 items). The 22-item ICPTh yielded high reliability (Cronbach's alpha = .966, item-total correlation = .497 - .883, test-retest reliability = .888). Conclusions We present a reliable instrument to measure 'Inner Correspondence' with painting therapy. Due to the small sample size and sample selection further validation studies are indicated.
Asunto(s)
Arteterapia , Neoplasias de la Mama , Supervivientes de Cáncer , Pinturas , Calidad de Vida , Encuestas y Cuestionarios , Anciano , Estudios de Cohortes , Fatiga , Femenino , Humanos , Persona de Mediana Edad , Atención Plena , Medición de Resultados Informados por el Paciente , Psicometría , Reproducibilidad de los Resultados , Sentido de CoherenciaRESUMEN
The biological process of wound healing is one of the most complex occurrences during our lives turning a serious public health problem. The rate of healing chronic wounds in humans is relatively uniform, regardless of etiologies, and is estimated to be 0.63-0.65 mm/week for diabetics and non- diabetics [1], respectively, being visually unnoticeable throughout the daily care of a wound. A ruler designed for this purpose using a decal for setting the wound limits, however an area with a lot of irregularity requires a tool that carries out this measurement autonomously through image recognition, making the process feasible for the medical teams responsible for the treatment. The digitized images undergo morphological processes sing on the polygonal line that delimits the wound region. With the region delimited by the polygonal, the area and the perimeter are determined. A comparison with analytical methods demonstrates that this tool has the potential to become gold standard for estimating to estimate the area and the perimeter of wounds in the healing process.
Asunto(s)
Diseño de Software , Cicatrización de Heridas , HumanosRESUMEN
Cystic Fibrosis (CF) is the most common autosomal-recessive genetic disease affecting approximately 8000 people in Germany. The disease is caused by mutations in the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) gene leading to dysfunction of CFTR, a transmembrane chloride channel. This defect causes insufficient hydration of the epithelial lining fluid which leads to chronic inflammation of the airways. Recurrent infections of the airways as well as pulmonary exacerbations aggravate chronic inflammation, lead to pulmonary fibrosis and tissue destruction up to global respiratory insufficiency, which is responsible for the mortality in over 90â% of patients. The main aim of pulmonary treatment in CF is to reduce pulmonary inflammation and chronic infection. Pseudomonas aeruginosa (Pa) is the most relevant pathogen in the course of CF lung disease. Colonization and chronic infection are leading to additional loss of pulmonary function. There are many possibilities to treat Pa-infection. This is a S3-clinical guideline which implements a definition for chronic Pa-infection and demonstrates evidence-based diagnostic methods and medical treatment for Pa-infection in order to give guidance for individual treatment options.
Asunto(s)
Regulador de Conductancia de Transmembrana de Fibrosis Quística/genética , Fibrosis Quística/diagnóstico , Fibrosis Quística/terapia , Guías de Práctica Clínica como Asunto , Pseudomonas aeruginosa/aislamiento & purificación , Fibrosis Quística/complicaciones , Fibrosis Quística/microbiología , Regulador de Conductancia de Transmembrana de Fibrosis Quística/metabolismo , Alemania , Humanos , Infecciones por Pseudomonas/diagnósticoRESUMEN
OBJECTIVE: CAM fabrication is an important step within the CAD/CAM process. The internal fit of restorations is influenced by the accuracy of the subtractive CAM procedure. Little is known about how CAM strategies might influence the fit of CAD/CAM fabricated restorations. The aim of this study was to three-dimensionally evaluate the fit of CAD/CAM fabricated zirconia-reinforced lithium silicate ceramic partial crowns fabricated with three different CAM strategies. The null hypothesis was that different CAM strategies did not influence the fitting accuracy of CAD/CAM fabricated zirconia-reinforced lithium silicate ceramic partial crowns. METHODS AND MATERIALS: Preparation for a partial crown was performed on a maxillary right first molar on a typodont. A chairside CAD/CAM system with the intraoral scanning device CEREC Omnicam (Dentsply Sirona, York, PA, USA) and the 3+1 axis milling unit CEREC MCXL was used. There were three groups with different CAM strategies: step bur 12 (12), step bur 12S (12S), and two step-mode (12TWO). The zirconia-reinforced lithium silicate ceramic Celtra Duo (Dentsply Sirona) was used as the CAD/CAM material. A new 3D method for evaluating the fit was applied, consisting of the quadrant scan with the intraoral scanning device CEREC Omnicam. The scan of the PVS material adherent to the preparation and the preparation scan were matched, and the difference analysis was performed with special software OraCheck (Cyfex AG, Zurich, Switzerland). Three areas were selected for analysis: margin (MA), axial (AX), and occlusal (OC). Statistical analysis was performed using 80% percentile, one-way ANOVA, and the post hoc Scheffé test with α=0.05. RESULTS: Statistically significant differences were found both within and between the test groups. The aspect axial fit results varied from 90.5 ± 20.1 µm for the two-step milling mode (12TWO_AX) to 122.8 ± 12.2 µm for the milling with step bur 12S (12S_AX). The worst result in all groups was found for the aspect occlusal fit with the highest value for group 12S of 222.8 ± 35.6 µm. Group two-step milling mode (12TWO) performed statistically significantly better from groups 12 and 12S for the occlusal fit ( p<0.05). Deviation patterns were visually analyzed with a color-coded scheme for each restoration. CONCLUSIONS: CAM strategy influenced the internal adaptation of zirconia-reinforced lithium silicate partial crowns fabricated with a chairside CAD/CAM system. Sensible selection of specific areas of internal adaptation and fit is an important factor for evaluating the CAM accuracy of CAD/CAM systems.
Asunto(s)
Diseño Asistido por Computadora , Coronas , Diseño de Prótesis Dental/métodos , Cerámica , Filtración Dental , Adaptación Marginal Dental , Restauración Dental Permanente , Humanos , Imagenología Tridimensional/métodos , Técnicas In Vitro , Diente Molar/cirugía , CirconioRESUMEN
CLINICAL RELEVANCE:: Accurate reproduction of the jaw relationship is important in many fields of dentistry. Maximum intercuspation can be registered with digital buccal scan procedures implemented in the workflow of many intraoral scanning systems. OBJECTIVE:: The aim of this study was to investigate the accuracy of buccal scan procedures with intraoral scanning devices for the registration of habitual intercuspation in vivo. The hypothesis was that there is no statistically significant difference for buccal scan procedures compared to registration methods with poured model casts. METHODS AND MATERIALS:: Ten individuals (full dentition, no dental rehabilitations) were subjects for five different habitual intercuspation registration methods: (CI) poured model casts, manual hand registration, buccal scan with inEOS X5; (BC) intraoral scan, buccal scan with CEREC Bluecam; (OC4.2) intraoral scan, buccal scan with CEREC Omnicam software version 4.2; (OC4.5ß) intraoral scan, buccal scan with CEREC Omnicam version 4.5ß; and (TR) intraoral scan, buccal scan with Trios 3. Buccal scan was repeated three times. Analysis of rotation (Rot) and translation (Trans) parameters was performed with difference analysis software (OraCheck). Statistical analysis was performed with one-way analysis of variance and the post hoc Scheffé test ( p<0.05). RESULTS:: Statistical analysis showed no significant ( p>0.05) differences in terms of translation between groups CI_Trans (98.74±112.01 µm), BC_Trans (84.12±64.95 µm), OC4.2_Trans (60.70±35.08 µm), OC4.5ß_Trans (68.36±36.67 µm), and TR_Trans (66.60±64.39 µm). For rotation, there were no significant differences ( p>0.05) for groups CI_Rot (0.23±0.25°), BC_Rot (0.73±0.52°), OC4.2_Rot (0.45±0.31°), OC4.5ß_Rot (0.50±0.36°), and TR_Rot (0.47±0.65°). CONCLUSIONS:: Intraoral scanning devices allow the reproduction of the static relationship of the maxillary and mandibular teeth with the same accuracy as registration methods with poured model casts.
Asunto(s)
Oclusión Dental , Procesamiento de Imagen Asistido por Computador/métodos , Dispositivos Ópticos , Técnica de Impresión Dental , Humanos , Registro de la Relación Maxilomandibular , Modelos Dentales , Reproducibilidad de los Resultados , Programas InformáticosRESUMEN
AIM: To evaluate different magnetic resonance imaging (MRI) sequences for diagnosis of pulmonary manifestations of cystic fibrosis (CF) in comparison to chest computed tomography (CT), including an extended outcome analysis. MATERIALS AND METHODS: Twenty-eight patients with CF (15 male, 13 female, mean age 30.5±9.4 years) underwent CT and MRI of the lung. MRI (1.5 T) included different T2- and T1-weighted sequences: breath-hold HASTE (half Fourier acquisition single shot turbo spin echo) and VIBE (volumetric interpolated breath-hold examination, before and after contrast medium administration) sequences and respiratory-triggered PROPELLER (periodically rotated overlapping parallel lines with enhanced reconstruction) sequences with and without fat signal suppression, and perfusion imaging. CT and MRI images were evaluated by the modified Helbich and the Eichinger scoring systems. The clinical follow-up analysis assessed pulmonary exacerbations within 24 months. RESULTS: The highest concordance to CT was achieved for the PROPELLER sequences without fat signal suppression (concordance correlation coefficient CCC of the overall modified Helbich score 0.93 and of the overall Eichinger score 0.93). The other sequences had the following concordance: PROPELLER with fat signal suppression (CCCs 0.91 and 0.92), HASTE (CCCs 0.87 and 0.89), VIBE (CCCs 0.84 and 0.85) sequences. In the outcome analysis, the combined MRI analysis of all five sequences and a specific MRI protocol (PROPELLER without fast signal suppression, VIBE sequences, perfusion imaging) reached similar correlations to the number of pulmonary exacerbations as the CT examinations. CONCLUSION: An optimum lung MRI protocol in patients with CF consists of PROPELLER sequences without fat signal suppression, VIBE sequences, and lung perfusion analysis to enable high diagnostic efficacy and outcome prediction.
Asunto(s)
Fibrosis Quística/diagnóstico por imagen , Aumento de la Imagen/métodos , Imagen por Resonancia Magnética/métodos , Tomografía Computarizada por Rayos X/métodos , Adulto , Medios de Contraste , Femenino , Humanos , Interpretación de Imagen Asistida por Computador/métodos , Masculino , Persona de Mediana Edad , Estudios ProspectivosRESUMEN
There is no doubt today about the possibilities and potential of digital impression-taking with the aid of intraoral optical impression systems, and the past few years have seen a considerable increase in the range of optical intraoral scanners available on the market. On the strength of numerous innovations and a wider range of indications in orthodontics and implantology, intraoral scanning systems appear to be a highly promising development for the future. Digital impression-taking with intraoral scanners has already shown itself in some respects to be clearly superior to conventional impression- taking. Particularly worthy of mention is the versatile integration of digital impressions into diagnostic and treatment concepts to provide a customizable healthcare solution for the patient. It remains exciting to look forward to future developments that will allow us to observe digital impression-taking--as with other digital applications already established in everyday life--becoming firmly established in the routine of dentistry and dental technology. This article presents an overview of the benefits and limitations of digital impression-taking using intraoral scanning systems, and includes a summary of all the relevant intraoral scanners available on the market at present.
Asunto(s)
Diseño Asistido por Computadora , Técnica de Impresión Dental , Sistemas de Computación , Diseño Asistido por Computadora/instrumentación , Costos y Análisis de Costo , Bases de Datos como Asunto , Equipo Dental , Implantes Dentales , Técnica de Impresión Dental/instrumentación , Oclusión Dental , Prótesis Dental de Soporte Implantado , Diseño de Equipo , Humanos , Sistemas de Información , Imagen Óptica/instrumentación , Tecnología Odontológica/instrumentación , Interfaz Usuario-ComputadorAsunto(s)
Hematuria/etiología , Choque Hemorrágico/etiología , Esclerosis Tuberosa/complicaciones , Esclerosis Tuberosa/diagnóstico , Adulto , Aneurisma/diagnóstico por imagen , Aneurisma/terapia , Embolización Terapéutica/métodos , Hematuria/terapia , Humanos , Masculino , Radiografía , Arteria Renal/diagnóstico por imagen , Choque Hemorrágico/terapia , Esclerosis Tuberosa/terapiaRESUMEN
In several studies on patients with bloodstream infection (BSI), prior use of statins has been associated with improved survival. Gram-positive and Gram-negative bacteria alert the innate immune system in different ways. We, therefore, studied whether the relation between prior statin use and 90-day total mortality differed between Gram-positive and Gram-negative BSI. We conducted a prospective observational cohort study of 1,408 adults with BSI admitted to Levanger Hospital between January 1, 2002, and December 31, 2011. Data on the use of statins and other medications at admission, comorbidities, functional status, treatment, and outcome were obtained from the patients' hospital records. The relation of statin use with 90-day mortality differed between Gram-negative and Gram-positive BSI (p-value for interaction 0.01). Among patients with Gram-negative BSI, statin users had significantly lower 90-day total mortality [odds ratio (OR) 0.42, 95 % confidence interval (CI) 0.23-0.75, p = 0.003]. The association remained essentially unchanged after adjusting for the effect of sex, age, functional status before the infection, and underlying diseases that were considered confounders (adjusted OR 0.38, 95 % CI 0.20-0.72, p = 0.003). A similar analysis of patients with Gram-positive BSI showed no association of statin use with mortality (adjusted OR 1.22, 95 % CI 0.69-2.17, p = 0.49). The present study suggests that prior statin use is associated with a lower 90-day total mortality in Gram-negative BSI, but not in Gram-positive BSI.
Asunto(s)
Anticolesterolemiantes/uso terapéutico , Infecciones por Bacterias Gramnegativas/mortalidad , Infecciones por Bacterias Grampositivas/mortalidad , Sepsis/mortalidad , Adulto , Anciano , Anciano de 80 o más Años , Estudios de Cohortes , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Sepsis/microbiología , Análisis de Supervivencia , Resultado del TratamientoRESUMEN
Intraoral and extraoral scanning systems are continuously improving in terms of operational reliability and image quality. This creates new application options for the standard use of these systems in dental practice. Three-dimensional scans for volumetric and differential analysis of jaw position over time can be generated by superimposing partial or full-arch scans recorded at different time points. These analyses can be performed in a wide range of dental applications to compare and follow treatments or diagnoses over time. In this article, we will describe the indications and applications for OraCheck, a new software application that will be available to Cerec users in Spring 2014.
Asunto(s)
Diseño Asistido por Computadora , Técnica de Impresión Dental , Imagenología Tridimensional/métodos , Programas Informáticos , Presentación de Datos , Técnica de Impresión Dental/normas , Estudios de Seguimiento , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Procesamiento de Imagen Asistido por Computador/normas , Imagenología Tridimensional/normas , Registro de la Relación Maxilomandibular/métodos , Control de Calidad , Interfaz Usuario-ComputadorRESUMEN
OBJECTIVES: This study aims to evaluate the effect of a minimally invasive mesial-occlusal-distal (mod) preparation on the marginal adaptation of ceramic and composite inlays with the aim of saving sound dental substance. MATERIALS AND METHODS: Class II mod cavities were prepared in 50 extracted human molars and randomly allocated to five groups (n = 10). In all groups, the mesial-proximal box margins were located in the dentin, 1 mm below the cementoenamel junction (CEJ), while the distal box margins were 1 mm above the CEJ. In groups A and B, conventional standard preparations with a divergent angle of α = 6° were prepared. In groups C, D, and E, minimally invasive standard preparations with a convergent angle of α = 10° were prepared. In groups A and D, composite inlays and, in groups B and C, ceramic inlays were fabricated (chairside economical restoration of esthetic ceramics (CEREC)) and adhesively inserted. In group E, a direct composite filling using the incremental technique was placed. Replicas were taken before and after thermomechanical loading (1,200,000 cycles, 50/5 °C, max. load 49 N). Marginal integrity (tooth-luting composite, luting composite-inlay) was evaluated by scanning electron microscopy (× 200). The percentage of continuous margins in the different locations was compared between and within groups before and after cycling, using ANOVA and Scheffé post hoc test. RESULTS: After the thermomechanical loading, no significant differences were observed between the different groups with respect to the interface of luting composite-inlay. At the interface of tooth-luting composite for preparations involving the dentin, groups A and B behaved significantly better compared to the control group E, which in turn were not different to groups C and D. CONCLUSION: Composite and ceramic inlays inserted in minimally invasive prepared mod cavities result in margins not different from those of inlays placed in conventional mod preparations. Direct composite filling margins, however, were inferior to those attained by conventional indirect restorations. CLINICAL RELEVANCE: Minimally invasive preparations for mod inlays with undercuts show marginal adaptation equal to that of conventional inlay preparation design.
Asunto(s)
Cerámica , Resinas Compuestas , Caries Dental/patología , Cementos Dentales , Humanos , Microscopía Electrónica de RastreoRESUMEN
OBJECTIVES: The aim of this in vivo study was to investigate how reproducible individuals find their habitual intercuspation. METHODS: A new type of highly accurate measuring procedure was involved using an intraoral optical scanning device (Cerec Bluecam). First, a pilot test investigated the accuracy of the procedure within a standardized setting. With regard to the in vivo study, fifteen participants with full dentition were selected. For each of these individuals, eight scans were taken both in the morning and in the afternoon. Furthermore, during each session, scans were taken both in horizontal and upright position. In order to compare this to ubiquitous used processes, plaster replicas of five individuals were investigated as well. The scans were analysed, and the differences in the position of the lower jaw were calculated by a specialized superimposition program (n=570 comparisons/OraCheck). RESULTS: The results showed that there was no significant difference between the time of day and the position of the patient. The overall mean ± SD value for locating the habitual intercuspation was 42 ± 34 µm, however ranging from 22 ± 9 µm to 77 ± 58 µm for single individuals. On the other hand, the differences in positioning plaster replicas reached a mean of 135 ± 77 µm. CONCLUSIONS: The reproducibility of the habitual intercuspation can be obtained under in vivo conditions by a newly developed and highly accurate measuring procedure. Individuals with full dentition show values in average of 42 µm. CLINICAL SIGNIFICANCE: Determining the occlusal jaw relation is an important precondition in restorative dentistry and many methods are proposed for a proper occlusal registration. Although much is known about in vitro accuracy of these techniques, little is known how reproducible the habitual occlusal position itself is found between individuals.
Asunto(s)
Oclusión Dental , Adolescente , Adulto , Diente Premolar/anatomía & histología , Femenino , Humanos , Registro de la Relación Maxilomandibular , Masculino , Mandíbula/anatomía & histología , Persona de Mediana Edad , Modelos Dentales , Dispositivos Ópticos , Proyectos Piloto , Postura/fisiología , Reproducibilidad de los Resultados , Rotación , Factores de Tiempo , Adulto JovenRESUMEN
Reported food-related symptoms of patients may sometimes be misleading. A correct delineation of food-induced symptoms is often difficult and various differential diagnoses have to be considered. We report on two cases of food-induced, predominantly respiratory symptoms (in one case life-threatening) in children with food allergy. First, a two-year-old boy with no history of allergies and suspected foreign body aspiration which was finally diagnosed as an anaphylactic reaction to fish, and secondly a six-year-old girl with multiple food allergies and allergic asthma who during an electively performed oral food challenge developed severe respiratory distress, drop in blood pressure, and asphyxia not due to an anaphylactic reaction but due to choking on an unnoticed sweet. These two cases represent challenging, life-threatening symptom constellations involving food-induced reactions in food allergic children, reminding us to question first impressions.
Asunto(s)
Obstrucción de las Vías Aéreas/diagnóstico , Anafilaxia/diagnóstico , Hipersensibilidad a los Alimentos/diagnóstico , Cuerpos Extraños/diagnóstico , Aspiración Respiratoria/diagnóstico , Síndrome de Dificultad Respiratoria/diagnóstico , Obstrucción de las Vías Aéreas/etiología , Anafilaxia/complicaciones , Broncoscopía , Niño , Preescolar , Diagnóstico Diferencial , Femenino , Hipersensibilidad a los Alimentos/complicaciones , Cuerpos Extraños/complicaciones , Humanos , Masculino , Aspiración Respiratoria/complicaciones , Síndrome de Dificultad Respiratoria/etiologíaAsunto(s)
Diseño Asistido por Computadora , Técnica de Impresión Dental , Dispositivos Ópticos , Diseño Asistido por Computadora/instrumentación , Técnica de Impresión Dental/instrumentación , Diseño de Equipo , Humanos , Procesamiento de Imagen Asistido por Computador/instrumentación , Almacenamiento y Recuperación de la Información , Dispositivos Ópticos/clasificación , Sistemas de Atención de Punto , Programas Informáticos , Interfaz Usuario-ComputadorRESUMEN
The digital intraoral impression is a central part in today's CAD/CAM dentistry. With its possibilities, new treatment options for the patient is provided and the prosthetic workflow is accelerated. Nowadays, the major issue with intraoral scanning systems is to gain more accuracy especially for larger scan areas and to simplify clinical handling for the dentist. The aim of this study was to investigate different scanning strategies regardingtheir accuracy with full arch scans in an in-vitro study design. A reference master model was used for the digital impressions with the Lava COS, the Cerec Bluecam and a powderfree intraoral scanning system, Cadent iTero. The trueness and precision of each scanning protocol was measured. Lava COS provides the a trueness of 45.8 microm with the scanning protocol recommended from the manufacturer. A different scanning protocol shows significantly lower accuracy (trueness +/- 90.2 microm). Cerec Bluecam also benefits from an optimal scanning protocol with a trueness of +/- 23.3 microm compared to +/- 52.5 microm with a standard protocol. The powderfree impression system Cadent iTero shows also a high accurate full-arch scan with a trueness of +/- 35.0 microm and a precision of +/- 30.9 microm. With the current intraoral scanning systems, full arch dental impressions are possible with a high accuracy, if adequate scan strategies are used. The powderfree scanning system provides the same level of accuracy compared to scanning systems with surface pretreatment.
Asunto(s)
Diseño Asistido por Computadora/estadística & datos numéricos , Técnica de Impresión Dental/estadística & datos numéricos , Diseño Asistido por Computadora/instrumentación , Arco Dental/anatomía & histología , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Imagenología Tridimensional/métodos , Maxilar/anatomía & histología , Modelos Dentales , Dispositivos Ópticos , Reproducibilidad de los Resultados , Programas Informáticos , Interfaz Usuario-ComputadorRESUMEN
The quality of intraoral scanning systems is steadily improving, and they are becoming easier and more reliable to operate. This opens up possibilities for routine clinical applications. A special aspect is that overlaying (superimposing) situations recorded at different times facilitates an accurate three-dimensional difference analysis. Such difference analyses can also be used to advantage in other areas of dentistry where target/actual comparisons are required. This article presents potential indications using a newly developed software, explaining the functionality of the evaluation process and the prerequisites and limitations of 3D monitoring.