Production of sealed rod sources made from epoxy resin for the Saint-Petersburg brick phantom for the calibration of whole-body counters.

Rod sources are a common tool for the calibration of whole-body counters in combination with the Saint-Petersburg brick phantom. Here, a method for the production of such sources in ordinary radiochemical laboratories is presented. The rod sources consist of a tubular capsule of rigid polyvinyl chloride with a radioactive filling of epoxy resin. The method allows the production of rod sources at material costs of about 1 € per rod source and of ten rod sources by one person per day. Quality-assurance measurements were performed regarding the spatial distribution of the activity within the rod sources and the distribution of the activity throughout a set of sources. The relative double standard deviation of the activities of five different segments of single rod sources was 7.1%. The relative double standard deviation within a set of 90 rod sources was 2.8% after those 11% of sources with the greatest deviation from the arithmetic mean were discarded. Tests according to ISO 2919 to certify the rod sources as sealed sources of Class 2 of this standard were successfully conducted. The bending test proved to be the most critical test for the rod sources; the sources were broken by a mass of 12-14 kg, which is only slightly more than the stipulated mass of 10.2 kg. The presented method allows for a cost- and labour-effective production of sealed radioactive rod sources and thus facilitates the application of the Saint-Petersburg brick phantom for calibrations and interlaboratory comparisons of whole-body counters.

Virtual Igor: an analytical phantom for the simulation of the Saint Petersburg brick phantom in arbitrary layouts in MCNP.

A computer code called Virtual Igor is presented. The code generates an analytical representation of the Saint Petersburg brick phantom family (Igor, Olga, Irina), which is frequently used for the calibration of whole-body counters, in arbitrary user-defined layouts for the use in the Monte-Carlo radiation transport code MCNP. The computer code reads a file in the ldraw format, which can easily be produced by simple freeware software with graphical user interfaces and which contains the types and coordinates of the bricks. Ldraw files with the canonical layouts of the brick phantom are provided with Virtual Igor. The code determines the positions of (2.75 cm)3 segments of the bricks, where 2.75 cm is the smallest length in the layout and, therefore, represents the spacing of the segment lattice. Each segment contains the exact geometry of the respective part of the brick, using cuboid and cylindrical surfaces. The user can define which rod source drill holes of which bricks contain the rod-type radionuclide sources. The method facilitates the comparison of different layouts of the Saint Petersburg brick phantom with each other and with anthropomorphic computational phantoms.

Exposure of German hunters and their family members to the radioactive nuclide 137Cs due to their eating habits.

The radioactive nuclide 137Cs that was released during the Chernobyl accident in 1986 is still present in the environment of wide parts of Middle Europe. It causes internal radiation exposure of people who incorporate this radionuclide when eating contaminated food, in particular boar meat and certain kinds of wild mushrooms. This study investigates the exposure of German hunters and their family members, which are supposed to consume these kinds of food more frequently than the general population. For this purpose, the body activity of 137Cs was measured in 58 hunters and their family members mostly from Southern Germany and it was compared with body activities from 1729 measurements of 251 members of the general population. Significantly higher 137Cs body activities were found in the hunters and their family members compared to the references after matching both groups for sociodemographic factors and the time of the measurement (factor of 2.4 between the geometric means, p-value ≪ 0.001). Within the hunters and their family members, an adjusted exponential regression showed significant associations of the activity and of mushroom picking (factor 2.6, 95% confidence interval 1.5-4.6) and of the frequency of having boar meat as part of the diet (factor 1.4 per meal per week, 95% confidence interval 1.1-1.8). No significant association was found for the 137Cs surface contamination at the hunting grounds. Within families, mostly similar results were found in terms of activity concentrations. For the hunter with the highest measured activity (1050 Bq), an annual contribution to the effective dose of 35 µSv was calculated, showing that also in hunters and their family members 137Cs is expected to cause only small contributions to the total effective dose from environmental exposure.

Thyroid monitoring of adults and children after reactor accidents with a new dose rate measurement device.

A specialized dose rate measurement device that was designed for monitoring the thyroid dose of children and adults after reactor accidents was tested. In measurements with neck phantoms and a human patient, the device was found to be capable of measuring the required low dose rates, even within increased ambient radiation. It is suitable for the application in emergency care centers.

Radon and thoron inhalation doses in dwellings with earthen architecture: Comparison of measurement methods.

The radioactive noble gas radon (222Rn) and its decay products have been considered a health risk in the indoor environment for many years because of their contribution to the radiation dose of the lungs. The radioisotope thoron (220Rn) and its decay products came into focus of being a health risk only recently. The reason for this is its short half-life, so only building material can become a significant source for indoor thoron. In this study, dwellings with earthen architecture were investigated with different independent measurement techniques in order to determine appropriate methods for reliable dose assessment of the dwellers. While for radon dose assessment, radon gas measurement and the assumption of a common indoor equilibrium factor often are sufficient, thoron gas has proven to be an unreliable surrogate for a direct measurement of thoron decay products. Active/time-resolved but also passive/integrating measurements of the total concentration of thoron decay products demonstrated being precise and efficient methods for determining the exposure and inhalation dose from thoron and its decay products. Exhalation rate measurements are a useful method for a rough dose estimate only if the exhalation rate is homogeneous throughout the house. Before the construction of a building in-vitro exhalation rate measurements on the building material can yield information about the exposure that is to be expected. Determining the unattached fraction of radon decay products and even more of thoron decay products leads to only a slightly better precision; this confirms the relative unimportance of the unattached thoron decay products due to their low concentration. The results of this study thereby give advice on the proper measurement method in similar exposure situations.

A puzzling case of contamination with 241Am.

Two people were exposed to and contaminated with 241Am. In vivo determinations of the incorporated 241Am were performed using a whole-body counter and two partial-body counters for the skull and lung, respectively. Additionally, urine samples were analysed to estimate the systemic activity removed from the body. To improve the geometry of the skull measurements, an optimised detector configuration was used, a calibration with three physical phantoms of the human head was conducted, and the morphological variability between the individuals was also considered. The results of the measurements indicate that activity is not deposited in the deep tissues, rather in the skin tissues close to the body surface. Unfortunately, the many open questions relating to the actual circumstances during and after the incident make the interpretation of this case difficult if at all possible.

An unattended device for high-voltage sampling and passive measurement of thoron decay products.

An integrating measurement device for the concentration of airborne thoron decay products was designed and calibrated. It is suitable for unattended use over up to several months also in inhabited dwellings. The device consists of a hemispheric capacitor with a wire mesh as the outer electrode on ground potential and the sampling substrates as the inner electrode on +7.0 kV. Negatively charged and neutral thoron decay products are accelerated to and deposited on the sampling substrates. As sampling substrates, CR39 solid-state nuclear track detectors are used in order to record the alpha decay of the sampled decay products. Nuclide discrimination is achieved by covering the detectors with aluminum foil of different thickness, which are penetrated only by alpha particles with sufficient energy. Devices of this type were calibrated against working level monitors in a thoron experimental house. The sensitivity was measured as 9.2 tracks per Bq/m(3) × d of thoron decay products. The devices were used over 8 weeks in several houses built of earthen material in southern Germany, where equilibrium equivalent concentrations of 1.4-9.9 Bq/m(3) of thoron decay products were measured.

Solubility of hot fuel particles from Chernobyl--influencing parameters for individual radiation dose calculations.

Nuclear fuel particles of Chernobyl origin are carriers of increased radioactivity (hot particles) and are still present in the atmosphere of the Chernobyl exclusion zone. Workers in the zone may inhale these particles, which makes assessment necessary. The residence time in the lungs and the transfer in the blood of the inhaled radionuclides are crucial for inhalation dose assessment. Therefore, the dissolution of several kinds of nuclear fuel particles from air filters sampled in the Chernobyl exclusion zone was studied. For this purpose filter fragments with hot particles were submersed in simulated lung fluids (SLFs). The activities of the radionuclides (137)Cs, (90)Sr, (239+240)Pu and (241)Am were measured in the SLF and in the residuum of the fragments by radiometric methods after chemical treatment. Soluble fractions as well as dissolution rates of the nuclides were determined. The influence of the genesis of the hot particles, represented by the (137)Cs/(239+240)Pu ratio, on the availability of (137)Cs was demonstrated, whereas the dissolution of (90)Sr, (239+240)Pu and (241)Am proved to be independent of genesis. No difference in the dissolution of (137)Cs and (239+240)Pu was observed for the two applied types of SLF. Increased solubility was found for smaller hot particles. A two-component exponential model was used to describe the dissolution of the nuclides as a function of time. The results were applied for determining individual inhalation dose coefficients for the workers at the Chernobyl construction site. Greater dose coefficients for the respiratory tract and smaller coefficients for the other organs were calculated (compared to ICRP default values). The effective doses were in general lower for the considered radionuclides, for (241)Am even by one order of magnitude.

Mitigation of radon and thoron decay products by filtration.

Inhalation of indoor radon ((222)Rn) and thoron ((220)Rn) decay products is the most important source of exposure to ionizing radiation for the human respiratory tract. Decreasing ventilation rates due to energy saving reasons in new buildings suggest additional active mitigation techniques to reduce the exposure in homes with high radon and thoron concentrations but poor ventilation. Filtration techniques with HEPA filters and simple surgical mask material have been tested for their potential to reduce the indoor exposure in terms of the total effective dose for mixed radon and thoron indoor atmospheres. The tests were performed inside an experimental room providing stable conditions. Filtration (at filtration rates of 0.2 h(-1) and larger) removes attached radon and thoron decay products effectively but indoor aerosol as well. Therefore the concentration of unattached decay products (which have a higher dose coefficient) may increase. The decrease of the attached decay product concentrations could be theoretically described by a slowly decreasing exponential process. For attached radon decay products, it exhibited a faster but weaker removal process compared to attached thoron decay products (-70% for attached radon decay products and -80% for attached thoron decay products at a filtration rate of 0.5 h(-1) with an HEPA filter). The concentration of unattached thoron decay products increased distinctly during the filtration process (+300%) while that of unattached radon decay products rose only slightly though at a much higher level (+17%). In the theoretical description these observed differences could be attributed to the different half-lives of the nuclides. Considering both effects, reduced attached and increased unattached decay product concentrations, filtration could significantly decrease the total effective dose from thoron whereas the overall effect on radon dose is small. A permanent filtration is recommended because of the slow decrease of the thoron decay product concentrations.

Online measurement of unattached and total radon and thoron decay products.

Radon and thoron decay products appear in two size modes: unattached and attached to aerosol particles. They deposit at different regions of the human respiratory tract causing different inhalation doses. A separate measurement of the concentration of both modes is realized by a new device based on a working level monitor and screen sampling. In addition, a new operation and evaluation procedure of the working level monitor is described to identify the thoron decay products (212)Pb and (212)Bi separately. First measurements reveal consistent results. The developments in measurement technique will enhance radon and thoron dose assessment.