Using the reactive/transport dispersive models to simulate a monolithic anion exchanger: Experimental parameter determination, simultaneous model evaluation, and validation.

Selecting an adequate model to represent the mass transfer mechanisms occurring in a chromatographic process is generally complicated, which is one of the reasons why monolithic chromatography is scarcely simulated. In this study, the chromatographic separation of model proteins bovine serum albumin (BSA), ß-lactoglobulin-A, and ß-lactoglobulin-B on an anion exchange monolith was simulated based on experimental parameter determination, simultaneous model testing, and validation under three statistical criteria: retention time, dispersion accuracies, and Pearson correlation coefficient. Experimental characterization of morphologic, physicochemical, and kinetic parameters was performed through volume balances, pressure drop analysis, breakthrough curve analysis, and batch adsorptions. Free Gibbs energy indicated a spontaneous adsorption process for proteins and counterions. Dimensionless numbers were estimated based on height equivalent to a theoretical plate analysis, finding that pore diffusion controlled ß-lactoglobulin separation, whereas adsorption/desorption kinetics was the dominant mechanism for BSA. The elution profiles were modeled using the transport dispersive model and the reactive dispersive model coupled with steric mass action (SMA) isotherms because these models allowed to consider most of the mass transport mechanisms that have been described. RDM-SMA presented the most accurate simulations at pH 6.0 and at low (250 mM) and high (400 mM) NaCl concentrations. This simulation will be used as reference to forecast the purification of these proteins from bovine whey waste and to extrapolate this methodology to other monolith-based separations using these three statistical criteria that have not been used previously for this purpose.

Saccharomyces cerevisiae biofactory to produce naringenin using a systems biology approach and a bicistronic vector expression strategy in flavonoid production.

IMPORTANCE: Flavonoids are a group of compounds generally produced by plants with proven biological activity, which have recently beeen recommended for the treatment and prevention of diseases and ailments with diverse causes. In this study, naringenin was produced in adequate amounts in yeast after in silico design. The four genes of the involved enzymes from several organisms (bacteria and plants) were multi-expressed in two vectors carrying each two genes linked by a short viral peptide sequence. The batch kinetic behavior of the product, substrate, and biomass was described at lab scale. The engineered strain might be used in a more affordable and viable bioprocess for industrial naringenin procurement.

Advances in Material Modification with Smart Functional Polymers for Combating Biofilms in Biomedical Applications.

Biofilms as living microorganism communities are found anywhere, and for the healthcare sector, these constitute a threat and allied mechanism for health-associated or nosocomial infections. This review states the basis of biofilms and their formation. It focuses on their relevance for the biomedical sector, generalities, and the major advances in modified or new synthesized materials to prevent or control biofilm formation in biomedicine. Biofilm is conceptualized as an aggregate of cells highly communicated in an extracellular matrix, which the formation obeys to molecular and genetic basis. The biofilm offers protection to microorganisms from unfavorable environmental conditions. The most frequent genera of microorganisms forming biofilms and reported in infections are Staphylococcus spp., Escherichia spp., and Candida spp. in implants, heart valves, catheters, medical devices, and prostheses. During the last decade, biofilms have been most commonly related to health-associated infections and deaths in Europe, the United States, and Mexico. Smart, functional polymers are materials capable of responding to diverse stimuli. These represent a strategy to fight against biofilms through the modification or synthesis of new materials. Polypropylene and poly-N-isopropyl acrylamide were used enough in the literature analysis performed. Even smart polymers serve as delivery systems for other substances, such as antibiotics, for biofilm control.

Design and Assembly of a Biofactory for (2S)-Naringenin Production in Escherichia coli: Effects of Oxygen Transfer on Yield and Gene Expression.

The molecule (2S)-naringenin is a scaffold molecule with several nutraceutical properties. Currently, (2S)-naringenin is obtained through chemical synthesis and plant isolation. However, these methods have several drawbacks. Thus, heterologous biosynthesis has emerged as a viable alternative to its production. Recently, (2S)-naringenin production studies in Escherichia coli have used different tools to increase its yield up to 588 mg/L. In this study, we designed and assembled a bio-factory for (2S)-naringenin production. Firstly, we used several parametrized algorithms to identify the shortest pathway for producing (2S)-naringenin in E. coli, selecting the genes phenylalanine ammonia lipase (pal), 4-coumarate: CoA ligase (4cl), chalcone synthase (chs), and chalcone isomerase (chi) for the biosynthetic pathway. Then, we evaluated the effect of oxygen transfer on the production of (2S)-naringenin at flask (50 mL) and bench (4 L culture) scales. At the flask scale, the agitation rate varied between 50 rpm and 250 rpm. At the bench scale, the dissolved oxygen was kept constant at 5% DO (dissolved oxygen) and 40% DO, obtaining the highest (2S)-naringenin titer (3.11 ± 0.14 g/L). Using genome-scale modeling, gene expression analysis (RT-qPCR) of oxygen-sensitive genes was obtained.

State-of-the-Art and Opportunities for Bioactive Pentacyclic Triterpenes from Native Mexican Plants.

Native Mexican plants are a wide source of bioactive compounds such as pentacyclic triterpenes. Pentacyclic triterpenes biosynthesized through the mevalonate (MVA) and the 2-C-methyl-D-erythritol-phosphate (MEP) metabolic pathways are highlighted by their diverse biological activity. Compounds belonging to the oleanane, ursane, and lupane groups have been identified in about 33 Mexican plants, located geographically in the southwest of Mexico. The works addressing these findings have reported 45 compounds that mainly show antimicrobial activity, followed by anti-inflammatory, cytotoxic, anxiolytic, hypoglycemic, and growth-stimulating or allelopathic activities. Extraction by maceration and Soxhlet with organic solvents and consecutive chromatography of silica gel have been used for their whole or partial purification. Nanoparticles and nanoemulsions are the vehicles used in Mexican formulations for drug delivery of the pentacyclic triterpenes until now. Sustainable extraction, formulation, regulation, isolation, characterization, and bioassay facilities are areas of opportunity in pentacyclic triterpenes research in Mexico while the presence of plant and human resources and traditional knowledge are strengths. The present review discusses the generalities of the pentacyclic triterpene (definition, biogenic classification, and biosynthesis), a summary of the last two decades of research on the compounds identified and their evaluated bioactivity, the generalities about the extraction and purification methods used, drug delivery aspects, and a critical analysis of the advantages and limitations of research carried out in this way.

Mono-PEGylated lysozyme purification with increased productivity and isomer differentiation through heparin monolith chromatography.

PEGylated protein purification with the required quality attributes has represented a bioengineering challenge and Affinity Monolith Chromatography (AMC) has never been exploited for this goal. This work reports the generation of a heparin-modified affinity monolith disk by reductive alkylation with raised ligand density for its use as chromatographic support in the separation of lysozyme PEGylation reactions (LPRs) with three different PEG sizes (1, 20 and 40 kDa). For immobilized heparin determination a modified toluidine colorimetric assay adapted to microplate format was proposed. The heparin modified-disk was able to differentiate positional isomers of 20 kDa mono-PEGylated lysozyme at neutral pH using a salt linear gradient. Identity of PEG-conjugates was verified by SDS-PAGE and positional isomers were partially characterized by peptide mapping mass spectrometry. 20 kDa mono-PEGylated lysozyme conjugate purity (99.69 ± 0.05%) was comparable with traditional chromatographic methods while productivity (0.0964 ± 0.0001 mg/mL*min) was increased up to 6.1 times compared to that obtained in heparin packed-bed affinity chromatography procedures. The proposed AMC method represents a reliable, efficient, easy-handling, fast and single-step operation for the analysis or preparative isolation of PEGylated proteins containing a heparin binding domain.

Biological nanoparticles: Relevance as novel target drug delivery systems and leading chromatographic isolation approaches.

Nanotechnology is one of the most promising technologies of the 21st century, and it is now presenting an enormous impact on target drug delivery. In this context, the recent use of natural vesicle-like nanoparticles such as extracellular vesicles (i.e., exosomes, microvesicles, and apoptotic bodies) and virus-like particles is rendering encouraging results mostly because these delivery systems present cargo versatility, favorable body circulating advantages, biocompatibility, immunogenicity, and the capacity to be modified superficially to increase their affinity to a certain target or to control their entrance to the cell. However, some of the biggest challenges toward their clinical implementation are poorly standardized processing operations due to their inherent heterogeneity and expensive, long-lasting, and difficult to scale isolation procedures that can also affect the stability of the particles. Under these circumstances, chromatographic procedures represent an attractive and favorable alternative to overcome their downstream processing. Moreover, even when standardized chromatographic purification protocols are still in development, great achievements have been made using size exclusion, ionic exchange, hydrophobic interaction, and affinity protocols, mostly because of the correct harnessing of the nanovesicle membrane properties. In this sense, this review focuses on presenting the current understanding on the most promising therapeutic biological nanoparticles and the chromatographic isolation approaches employed in their recovery, providing at the same time recent findings and a general overview of the aspects that might impact the outcome of chromatographic techniques for this application.

Serological Test to Determine Exposure to SARS-CoV-2: ELISA Based on the Receptor-Binding Domain of the Spike Protein (S-RBDN318-V510) Expressed in Escherichia coli.

Massive worldwide serological testing for SARS-CoV-2 is needed to determine the extent of virus exposure in a particular region, the ratio of symptomatic to asymptomatic infected persons, and the duration and extent of immunity after infection. To achieve this, the development and production of reliable and cost-effective SARS-CoV-2 antigens is critical. We report the bacterial production of the peptide S-RBDN318-V510, which contains the receptor-binding domain of the SARS-CoV-2 spike protein (region of 193 amino acid residues from asparagine-318 to valine-510) of the SARS-CoV-2 spike protein. We purified this peptide using a straightforward approach involving bacterial lysis, his-tag-mediated affinity chromatography, and imidazole-assisted refolding. The antigen performances of S-RBDN318-V510 and a commercial full-length spike protein were compared in ELISAs. In direct ELISAs, where the antigen was directly bound to the ELISA surface, both antigens discriminated sera from non-exposed and exposed individuals. However, the discriminating resolution was better in ELISAs that used the full-spike antigen than the S-RBDN318-V510. Attachment of the antigens to the ELISA surface using a layer of anti-histidine antibodies gave equivalent resolution for both S-RBDN318-V510 and the full-length spike protein. Results demonstrate that ELISA-functional SARS-CoV-2 antigens can be produced in bacterial cultures, and that S-RBDN318-V510 may represent a cost-effective alternative to the use of structurally more complex antigens in serological COVID-19 testing.

Extraction and Isolation of Antineoplastic Pristimerin from Mortonia greggii (Celastraceae).

The aim of this research was to identify, extract and isolate pristimerin in leaves, stems and roots of the Mexican plant Mortonia greggii (Celastraceae). The principal objective was to determine the best laboratory experimental conditions for the extraction and isolation of this powerful natural anticancer agent from the root tissue. Six experimental factors in solid-liquid pristimerin extraction were analyzed: solvent systems, number of extractions, ratio of plant weight (g)/solvent volume (mL) used, time of extraction, temperature and agitation. A mathematical model was generated for pristimerin purity and yield. Ethanol, first extraction, 0.5 ratio of plant weight/solvent volume (g/mL), 0.5 h, 200 rpm and 49.7°C were optimal conditions for the extraction of this phytochemical. The degree of purification of pristimerin root extract was studied by size-exclusion chromatography (SEC) using Sephadex LH-20 reaching fractions with purification indexes (PI) greater than 2 and recoveries of 28.3%. When fractions with purification indices higher than 1 and less than 2 were accumulated, the recovery of pristimerin increased by about 73.6%. By combining the optimum extracts and SEC purification protocols, an enriched fraction containing 245.6 mg pristimerin was obtained from 100 g of root bark, representing about 14.4%, w/w, pristimerin from the total solids presented in the fraction.