Role of DNA repair in Bacillus subtilis spore resistance to high energy and low energy electron beam treatments.

Bacillus subtilis spore inactivation mechanisms under low energy electron beam (LEEB) and high energy electron beam (HEEB) treatment were investigated using seven mutants lacking specific DNA repair mechanisms. The results showed that most of the DNA repair-deficient mutants, including ΔrecA, ΔKu ΔligD, Δexo Δnfo, ΔuvrAB and ΔsbcDC, had reduced resistances towards electron beam (EB) treatments at all investigated energy levels (80 keV, 200 keV and 10 MeV) compared to their wild type. This result suggested DNA damage was induced during EB treatments. The mutant lacking recA showed the lowest resistance, followed by the mutant lacking Ku and ligD. These findings indicated that recA, Ku and ligD and their associated DNA repair mechanisms, namely, homologous recombination and non-homologous end joining, play important roles in spore survival under EB treatment. Furthermore, exoA, nfo, uvrAB, splB, polY1 and polY2, which are involved in nucleotide damage repair/removal, showed different levels of effects on spore resistance under EB treatment. Finally, the results suggested that HEEB and LEEB inactivate B. subtilis spores through similar mechanisms. This research will provide a better understanding of how EB technologies inactivate B. subtilis spores and will contribute to the application of these technologies as a non-thermal, gentle spore control approach.

Geobacillus and Bacillus Spore Inactivation by Low Energy Electron Beam Technology: Resistance and Influencing Factors.

Low energy electron beam (LEEB) treatment is an emerging non-thermal technology that performs surface decontamination with a minimal influence on food quality. Bacterial spore resistance toward LEEB treatment and its influencing factors were investigated in this study. Spores from Geobacillus and Bacillus species were treated with a lab-scale LEEB at energy levels of 80 and 200 keV. The spore resistances were expressed as D-values (the radiation dose required for one log10 reduction at a given energy level) calculated from the linear regression of log10 reduction against absorbed dose of the sample. The results revealed that the spore inactivation efficiency by LEEB is comparable to that of other ionizing radiations and that the inactivation curves are mostly log10-linear at the investigated dose range (3.8 - 8.2 kGy at 80 keV; 6.0 - 9.8 kGy at 200 keV). The D-values obtained from the wildtype strains varied from 2.2 - 3.0 kGy at 80 keV, and from 2.2 - 3.1 kGy at 200 keV. Bacillus subtilis mutant spores lacking α/ß-type small, acid-soluble spore proteins showed decreased D-values (1.3 kGy at 80 and 200 keV), indicating that spore DNA is one of the targets for LEEB spore inactivation. The results revealed that bacterial species, sporulation conditions and the treatment dose influence the spore LEEB inactivation. This finding indicates that for the application of this emerging technology, special attention should be paid to the choice of biological indicator, physiological state of the indicator and the processing settings. High spore inactivation efficiency supports the application of LEEB for the purpose of food surface decontamination. With its environmental, logistical, and economic advantages, LEEB can be a relevant technology for surface decontamination to deliver safe, minimally processed and additive-free food products.

Sterilization of liquid foods by pulsed electric fields-an innovative ultra-high temperature process.

The intention of this study was to investigate the inactivation of endospores by a combined thermal and pulsed electric field (PEF) treatment. Therefore, self-cultivated spores of Bacillus subtilis and commercial Geobacillus stearothermophilus spores with certified heat resistance were utilized. Spores of both strains were suspended in saline water (5.3 mS cm(-1)), skim milk (0.3% fat; 5.3 mS cm(-1)) and fresh prepared carrot juice (7.73 mS cm(-1)). The combination of moderate preheating (70-90°C) and an insulated PEF-chamber, combined with a holding tube (65 cm) and a heat exchanger for cooling, enabled a rapid heat up to 105-140°C (measured above the PEF chamber) within 92.2-368.9 µs. To compare the PEF process with a pure thermal inactivation, each spore suspension was heat treated in thin glass capillaries and D-values from 90 to 130°C and its corresponding z-values were calculated. For a comparison of the inactivation data, F-values for the temperature fields of both processes were calculated by using computational fluid dynamics (CFD). A preheating of saline water to 70°C with a flow rate of 5 l h(-1), a frequency of 150 Hz and an energy input of 226.5 kJ kg(-1), resulted in a measured outlet temperature of 117°C and a 4.67 log10 inactivation of B. subtilis. The thermal process with identical F-value caused only a 3.71 log10 inactivation. This synergism of moderate preheating and PEF was even more pronounced for G. stearothermophilus spores in saline water. A preheating to 95°C and an energy input of 144 kJ kg(-1) resulted in an outlet temperature of 126°C and a 3.28 log10 inactivation, whereas nearly no inactivation (0.2 log10) was achieved during the thermal treatment. Hence, the PEF technology was evaluated as an alternative ultra-high temperature process. However, for an industrial scale application of this process for sterilization, optimization of the treatment chamber design is needed to reduce the occurring inhomogeneous temperature fields.

Survival and death kinetics of Salmonella strains at low relative humidity, attached to stainless steel surfaces.

Salmonella is a major pathogen of concern for low water activity foods and understanding its persistence in dry food processing environments is important for producing safe food. The studies sought to assess the survival of 15 isolates of Salmonella on stainless steel surfaces. Additionally, the aim was to select a suitable model to describe and understand the strains' survival kinetics. Salmonella isolates were dried onto stainless steel surfaces, placed in controlled temperature (25°C) and humidity (33%) conditions and their viability assessed at times from 1h to 30days. The highest survival rate was associated with S. Typhimurium DT104, S. Muenchen, and S. Typhimurium (NCTC 12023), where, after 30days, the reduction ranged from 1.3log10 cfu/surface to 1.6log10 cfu/surface. The lowest survival was linked to a S. Typhimurium strain used in European Standard disinfectant approval tests and S. Typhimurium isolated from whey powder. For most of the strains, following an initial reduction in viability in the first hours (<72h), no further reduction was seen over the 30day period; therefore a 2-population Weibull model was fitted to model the survival kinetics. The overall survival was neither serotype nor time related. All strains had two different subpopulations, one more resistant to desiccation than the other. The results indicate the possibility of the long term survival of Salmonella on environmental surfaces (at least 30days) and suggest the most suitable model to describe and predict survival kinetics. The results also identify strains that may be used to study stress response mechanisms and potential factory control measures in future studies.

Minimization of thermal impact by application of electrode cooling in a co-linear PEF treatment chamber.

A co-linear pulsed electric field (PEF) treatment chamber was analyzed and optimized considering electrical process conditions, temperature, and retention of heat-sensitive compounds during a continuous PEF treatment of peach juice. The applicability of a jacket heat-exchanger device surrounding the ground electrode was studied in order to provide active cooling and to avoid temperature peaks within the treatment chamber thus reducing the total thermal load to which the product is exposed. Simulation of the PEF process was performed using a finite element method prior to experimental verification. Inactivation of polyphenoloxydase (PPO) and peroxidase (POD) as well as the degradation of ascorbic acid (AA) in peach juice was quantified and used as indirect indicators for the temperature distribution. Peaks of product temperature within the treatment chamber were reduced, that is, from 98 to 75 °C and retention of the indicators PPO, POD, and AA increased by more than 10% after application of the active electrode cooling device. Practical Application: The co-linear PEF treatment chamber is widely used for continuous PEF treatment of liquid products and also suitable for industrial scale application; however, Joule heating in combination with nonuniform electric field distribution may lead to unwanted thermal effects. The proposed design showed potential to reduce the thermal load, to which the food is exposed, allowing the retention of heat-sensitive components. The design is applicable at laboratory or industrial scale to perform PEF trials avoiding temperature peaks, which is also the basis for obtaining inactivation kinetic models with minimized thermal impact on the kinetic variables.