RESUMEN
The development of functional bionanocomposites for active food packaging is of current interest to replace non-biodegradable plastic coatings. In the present work, we report the synthesis of an alginate-based nanocomposite filled with modified halloysite nanotubes (HNTs) to develop coatings with improved barrier properties for food packaging. Firstly, HNTs were chemically modified by the introduction of carbon dots units (CDs) onto their external surface (HNTs-CDs) obtaining a nanomaterial where CDs are uniformly present onto the tubes as verified by morphological investigations, with good UV absorption and antioxidant properties. Afterwards, these were dispersed in the alginate matrix to obtain the alginate/HNTs-CDs nanocomposite (Alg/HNTs-CDs) whose morphology was imaged by AFM measurements. The UV and water barrier properties (in terms of moisture content and water vapor permeability) were investigated, and the antioxidant properties were evaluated as well. To confer some antimicrobial properties to the final nanocomposite, the synthetized filler was loaded with a natural extract (E) from M. cisplatensis. Finally, the extract kinetic release both from the filler and from the nanocomposite was studied in a medium mimicking a food simulant and preliminary studies on the effect of Alg/HNTs-CDs/E on coated and uncoated fruits, specifically apples and bananas were also carried out.
Asunto(s)
Alginatos , Antioxidantes , Arcilla , Embalaje de Alimentos , Nanocompuestos , Alginatos/química , Embalaje de Alimentos/métodos , Arcilla/química , Nanocompuestos/química , Antioxidantes/química , Antioxidantes/farmacología , Puntos Cuánticos/química , Carbono/química , PermeabilidadRESUMEN
Stable and uniform layers of protein molecules at the surface are important to build passive devices as well as active constructs for smart biointerfaces for a large number of biomedical applications. In this context, a strategy to build-up surfaces able to anchor protein molecules on specific and controlled surface sites has been developed. Human serum albumin (HSA) has been chosen as a model protein due to its important antithrombogenic properties and its features in cell response highly valuable for in vivo devices. Uniform self-assembled monolayers of 2,2':6'2â³-terpyridines (SAM), whose sites were further employed to chelate copper and iron ions, forming SAM-Cu(II) and SAM-Fe(II) complexes, have been developed. The effect of two metal cations on the physicochemical features of SAM, including thickness, Young's modulus, and tip-monolayer adhesion factors, has been investigated. Protein adsorption at different concentrations showed that the copper ion-templated surfaces exhibit highly specific mass uptake, kinetic behavior, and recognition and anchoring of HSA molecules owing to the coordination sphere of the different cations. The results pave the way to the development of a more general strategy to obtain ordered and density-tuned arrays of specific metal cations, which in turn would drive the anchoring of precise proteins for different biological functions.
Asunto(s)
Cobre , Albúmina Sérica Humana , Humanos , Adsorción , Transporte Biológico , CationesRESUMEN
The surface properties of drug containers should reduce the adsorption of the drug and avoid packaging surface/drug interactions, especially in the case of biologically-derived products. Here, we developed a multi-technique approach that combined Differential Scanning Calorimetry (DSC), Atomic Force Microscopy (AFM), Contact Angle (CA), Quartz Crystal Microbalance with Dissipation monitoring (QCM-D), and X-ray Photoemission Spectroscopy (XPS) to investigate the interactions of rhNGF on different pharma grade polymeric materials. Polypropylene (PP)/polyethylene (PE) copolymers and PP homopolymers, both as spin-coated films and injected molded samples, were evaluated for their degree of crystallinity and adsorption of protein. Our analyses showed that copolymers are characterized by a lower degree of crystallinity and lower roughness compared to PP homopolymers. In line with this, PP/PE copolymers also show higher contact angle values, indicating a lower surface wettability for the rhNGF solution on copolymers than PP homopolymers. Thus, we demonstrated that the chemical composition of the polymeric material and, in turn, its surface roughness determine the interaction with the protein and identified that copolymers may offer an advantage in terms of protein interaction/adsorption. The combined QCM-D and XPS data indicated that protein adsorption is a self-limiting process that passivates the surface after the deposition of roughly one molecular layer, preventing any further protein adsorption in the long term.
RESUMEN
Polyetheretherketone (PEEK) is a thermoplastic polymer that has been recently employed for bone tissue engineering as a result of its biocompatibility and mechanical properties being comparable to human bone. PEEK, however, is a bio-inert material and, when implanted, does not interact with the host tissues, resulting in poor integration. In this work, the surfaces of 3D-printed PEEK disks were functionalized with: (i) an adhesive peptide reproducing [351-359] h-Vitronectin sequence (HVP) and (ii) HVP retro-inverted dimer (D2HVP), that combines the bioactivity of the native sequence (HVP) with the stability toward proteolytic degradation. Both sequences were designed to be anchored to the polymer surface through specific covalent bonds via oxime chemistry. All functionalized PEEK samples were characterized by Water Contact Angle (WCA) measurements, Atomic Force Microscopy (AFM), and X-ray Photoelectron Spectroscopy (XPS) to confirm the peptide enrichment. The biological results showed that both peptides were able to increase cell proliferation at 3 and 21 days. D2HVP functionalized PEEK resulted in an enhanced proliferation across all time points investigated with higher calcium deposition and more elongated cell morphology.
Asunto(s)
Polímeros , Vitronectina , Humanos , Polietilenglicoles/química , Cetonas/química , Péptidos , Propiedades de SuperficieRESUMEN
Medical applications stimulate the need for materials with broad potential. Chitosan, the partially deacetylated derivative of chitin, offers many interesting characteristics, such as biocompatibility and chemical derivatization possibility. In the present study, porous scaffolds composed of electrospun interwoven nanometric fibers are produced using chitosan or chitosan functionalized with aliphatic chains of twelve, fourteen or sixteen methylene groups. The scaffolds were thoroughly characterized by SEM and XPS. The length of the aliphatic tail influenced the physico-chemical and dynamic mechanical properties of the functionalized chitosan. The electrospun membranes revealed no interaction of Gram+ or Gram- bacteria, resulting in neither antibacterial nor bactericidal, but constitutively sterile. The electrospun scaffolds demonstrated the absence of cytotoxicity, inflammation response, and eryptosis. These results open the door to their application for blood purification devices, hemodialysis membranes, and vascular grafts.
RESUMEN
The limitations and difficulties that nerve autografts create in normal nerve function recovery after injury is driving research towards using smart materials for next generation nerve conduits (NCs) setup. Here, the new polymer partially oxidized polyvinyl alcohol (OxPVA) was assayed to verify its future potential as a bioactivated platform for advanced/effective NCs. OxPVA-patterned scaffolds (obtained by a 3D-printed mold) with/without biochemical cues (peptide IKVAV covalently bound (OxPVA-IKVAV) or self-assembling peptide EAK (sequence: AEAEAKAKAEAEAKAK), mechanically incorporated (OxPVA+EAK) versus non-bioactivated scaffold (peptide-free OxPVA (PF-OxPVA) supports, OxPVA without IKVAV and OxPVA without EAK control scaffolds) were compared for their biological effect on neuronal SH-SY5Y cells. After cell seeding, adhesion/proliferation, mediated by (a) precise control over scaffolds surface ultrastructure; (b) functionalization efficacy guaranteed by bioactive cues (IKVAV/EAK), was investigated by MTT assay at 3, 7, 14 and 21 days. As shown by the results, the patterned groove alone stimulates colonization by cells; however, differences were observed when comparing the scaffold types over time. In the long period (21 days), patterned OxPVA+EAK scaffolds distinguished in bioactivity, assuring a significantly higher total cell amount than the other groups. Experimental evidence suggests patterned OxPVA-EAK potential for NCs device fabrication.
RESUMEN
The Spontaneous Symmetry Breaking (SSB) phenomenon is a natural event in which a system changes its symmetric state, apparently reasonless, in an asymmetrical one. Nevertheless, this occurrence could be hiding unknown inductive forces. An intriguing investigation pathway uses supramolecular aggregates of suitable achiral porphyrins, useful to mimic the natural light-harvesting systems (as chlorophyll). Using as SSB probe supramolecular aggregates of 5,10,15,20-tetrakis[p(ω-methoxypolyethyleneoxy)phenyl]porphyrin (StarP), a non-ionic achiral PEGylated porphyrin, we explore here its interaction with weak asymmetric thermal gradients fields. The cross-correlation of the experimental data (circular dichroism, confocal microscopy, atomic force microscopy, and cryo-transmission electron microscopy) revealed that the used building blocks aggregate spontaneously, organizing in flag-like structures whose thermally-induced circular dichroism depends on their features. Finally, thermal gradient-induced enantioselectivity of the supramolecular flag-like aggregates has been shown and linked to their size-dependence mesoscopic deformation, which could be visualized as waving flags in the wind.
RESUMEN
This paper reports atomic force microscopy results and molecular dynamics simulations of the striking differences of long-term self-organization structures of negatively charged (AcA4)2KD (double tail) and AcA4D (single tail) peptides, respectively, forming micrometer-long, linearly ordered ribbon-like structures and nanometer-sized, unstructured, round-shaped aggregates. The subsequent formation steps of the long-range nanoribbons, experimentally observed only for the "double tail" (AcA4)2KD peptide, are analyzed in detail, showing that the initial "primary" unstructured round-shaped aggregates progressively evolve into longer nanofilaments and into micrometer-long, network-forming nanoribbon moieties. In particular, the long-range self-organization of the "double tail" peptides appears to be closely related to electrostatically driven diffusional motions of the primary aggregates and nanofilaments. The diffusional freedom degrees are prompted by the formation of a dynamic ternary air/liquid/substrate interface, due to the water evaporation process from the ultrathin films of the peptide solution cast onto a solid mica substrate. Overall, the initial aggregation of unstructured round-shaped moieties, for both the peptides, can be seen as an entropy-driven process, involving the intra- and intermolecular interactions of hydrophobic parts of the peptides, while the further formation of long nanoribbons, only for "double tail" peptides, can be viewed in terms of an enthalpy-driven process, mainly due to the predominant electrostatic interactions between the charged heads of the interacting peptides. The role of the solid-liquid interface, as the locus of the enthalpy-driven linear organization, is also highlighted.
RESUMEN
Hydrogels produced by self-assembling peptides are intrinsically biocompatible and thus appropriate for many biomedical purposes. Their application field may be even made wider by reducing the softness and improving the hydrogel mechanical properties through cross-linking treatments. To this aim, modifications of EAK16-II sequence by including Cys residues in its sequence were here investigated in order to obtain hydrogels cross-linkable through a disulfide bridge. Two sequences, namely, C-EAK and C-EAK-C, that contain Cys residues at the N-terminus or at both ends were characterized. Fiber-forming abilities and biological and dynamic mechanical properties were explored before and after the oxidative treatment. In particular, the oxidized version of C-EAK presents a good cell viability and sustains osteoblast proliferation. Furthermore, molecular dynamics (MD) simulations on monomeric and assembled forms of the peptides were performed. MD simulations explained how a specific Cys functionalization was better than the other one. In particular, the results suggested that EAK16-II functionalization with a single Cys residue, instead of two, together with biocompatible cross-linking may be considered an intriguing strategy to obtain a support with better dynamic mechanical properties and biological performances.
Asunto(s)
Hidrogeles , Péptidos , Supervivencia Celular , Disulfuros , Simulación de Dinámica MolecularRESUMEN
Damage of enteric neurons and partial or total loss of selective neuronal populations are reported in intestinal disorders including inflammatory bowel diseases and necrotizing enterocolitis. To develop three-dimensional scaffolds for enteric neurons we propose the decoration of ionic-complementary self-assembling peptide (SAP) hydrogels, namely EAK or EAbuK, with bioactive motives. Our results showed the ability of EAK in supporting neuronal cell attachment and neurite development. Therefore, EAK was covalently conjugated to: RGD, (GRGDSP)4K (fibronectin), FRHRNRKGY (h-vitronectin, named HVP), IKVAV (laminin), and type 1 Insulin-like Growth Factor (IGF-1). Chemoselective ligation was applied for the SAP conjugation with IGF-1 and the other longer sequences. Freshly isolated murine enteric neurons attached and grew on all functionalized EAK but IGF-1. Cell-cell contact was evident on hydrogels enriched with (GRGDSP)4K and HVP. Moreover (GRGDSP)4K significantly increased mRNA expression of neurotrophin-3 and nerve growth factor, two trophic factors supporting neuronal survival and differentiation, whereas IKVAV decoration specifically increased mRNA expression of acetylcholinesterase and choline acetyltransferase, genes involved in synaptic communication between cholinergic neurons. Thus, decorated hydrogels are proposed as injectable scaffolds to support in loco survival of enteric neurons, foster synaptic communication, or drive the differentiation of neuronal subtypes.
Asunto(s)
Sistema Nervioso Entérico/metabolismo , Neuronas/metabolismo , Péptidos/metabolismo , Animales , Diferenciación Celular/fisiología , Supervivencia Celular/fisiología , Células Cultivadas , Factor I del Crecimiento Similar a la Insulina/metabolismo , Ratones , Factor de Crecimiento Nervioso/metabolismo , Neurogénesis/fisiología , Neurotrofina 3/metabolismo , ARN Mensajero/metabolismoRESUMEN
The cyclic change of structure, thickness, and density, with pH switching from acidic (pH = 3) to basic (pH = 11) condition, has been revealed for chemisorbed monolayers of the peptide Lipo-Aib-Lys-Leu-Aib-Lys-Lys-Leu-Aib-Lys-Ile-Lol, a trichogin GA IV-analogue carrying Lys residues instead of Gly ones at positions 2, 5, 6, and 9, while a homologous peptide not containing Lys residues does not show any response to pH changes. Experimental and theoretical results, obtained by means of quartz crystal microbalance with dissipation monitoring, surface plasmon resonance, nanoplasmonic sensing technique, Fourier transform infrared-reflection attenuated spectroscopy and dynamic force spectroscopy, and molecular dynamics simulations provide detailed information on the overall monolayer structure changes with pH, including the analysis of the intra- and interchain peptide dynamics, the structure of the peptide layer/water/solid interface, as well as the position and role of solvation and nonsolvation water. The observed stimuli-responsive behavior of L1 peptide monolayers is accounted in terms of the occurrence of a pH-induced wetting/dewetting process, due to the pH-induced switching of the hydrophilic character of charged lysine groups to hydrophobic one of the same uncharged groups, along the peptide chain. This behavior in turn promotes the collective change of the aggregation state of the peptide chains. The present results may pave the way to critically reexamine the mechanism of stimuli-responsive systems.
Asunto(s)
Péptidos/química , Adsorción , Concentración de Iones de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
We have developed a novel approach enabling us to follow and facilitate the formation of two-dimensional coordination polymer monolayers directly at the air/water interface without the need of complex instrumentation. The method is based on the use of a surface active ligand that, when spread at the air/water interface, progressively undergoes hydrolysis with consequent gradual decrease in surface pressure. Notably, if the aqueous subphase contains metal ions capable of coordinating the ligand, coordination competes with hydrolysis, resulting in a lower surface pressure decrease. As a consequence, the formation of the coordination polymer monolayer can be verified simply by surface pressure measurements. Competition between hydrolysis and coordination was investigated as a function of the main experimental parameters affecting the two reactions, enabling the formation of stable coordination polymer monolayers with controlled density. Finally, the formation of continuous rigid 2D layers was confirmed by compression isotherms and ex situ morphological characterization. This work will simplify the verification of coordination polymer monolayer formation; thus, it will boost the synthesis of novel and innovative 2D materials.
RESUMEN
Experimental and theoretical reports have shown that nanostructured surfaces have a dramatic effect on the amount of protein adsorbed and the conformational state and, in turn, on the performances of the related devices in tissue engineering strategies. Here we report an innovative method to prepare silica-based nanostructured surfaces with a reproducible, well-defined local curvature, consisting of ordered hexagonally packed arrays of curved hemispheres, from nanoparticles of different diameters (respectively 147 nm, 235 nm and 403 nm). The nanostructured surfaces have been made chemically homogeneous by partially embedding silica nanoparticles in poly(hydroxymethylsiloxane) films, further modified by means of UV-O3 treatments. This paper has been focused on the experimental and theoretical study of laminin, taken as a model protein, to study the nanocurvature effects on the protein configuration at nanostructured surfaces. A simple model, based on the interplay of electrostatic interactions between the charged terminal domains of laminin and the nanocurved charged surfaces, closely reproduces the experimental findings. In particular, the model suggests that nanocurvature drives the orientation of rigid proteins by means of a "geometrical resonance" effect, involving the matching of dimensions, charge distribution and spatial arrangement of both adsorbed molecules and adsorbent nanostructures. Overall, the results pave the way to unravel the nanostructured surface effects on the intra- and inter-molecular organization processes of proteins.
Asunto(s)
Nanoestructuras , Proteínas/análisis , Dióxido de Silicio , Adsorción , Laminina/análisis , Propiedades de SuperficieRESUMEN
The modeling and realization of an effective communication platform for long-range information transfer is reported. Messages are encrypted in molecular bits by concentration pulses of fluorescent carbon quantum dots having self-quenching emission that dynamically depends on the concentration pulses. Messages are transferred along longer paths when received and decoded by means of dynamical emission response with respect to the ones encoded by absorbance scaling linearly with messenger concentration. These results represent a significant breakthrough in view of the futuristic development of a nonspecific molecular communication platform to encode and transfer information in multiple fluid environments, ranging from physiological to industrial ones.
RESUMEN
Staphylococcus aureus is a major human pathogen causing health care-associated and community-associated infections. Early diagnosis is essential to prevent disease progression and to reduce complications that can be serious. In this study, we selected, from a 9-mer phage peptide library, a phage clone displaying peptide capable of specific binding to S. aureus cell surface, namely St.au9IVS5 (sequence peptide RVRSAPSSS).The ability of the isolated phage clone to interact specifically with S. aureus and the efficacy of its bacteria-binding properties were established by using enzyme linked immune-sorbent assay (ELISA). We also demonstrated by Western blot analysis that the most reactive and selective phage peptide binds a 78KDa protein on the bacterial cell surface. Furthermore, we observed selectivity of phage-bacteria-binding allowing to identify clinical isolates of S. aureus in comparison with a panel of other bacterial species. In order to explore the possibility of realizing a selective bacteria biosensor device, based on immobilization of affinity-selected phage, we have studied the physisorbed phage deposition onto a mica surface. Atomic Force Microscopy (AFM) was used to determine the organization of phage on mica surface and then the binding performance of mica-physisorbed phage to bacterial target was evaluated during the time by fluorescent microscopy. The system is able to bind specifically about 50% of S. aureus cells after 15' and 90% after one hour. Due to specificity and rapidness, this biosensing strategy paves the way to the further development of new cheap biosensors to be used in developing countries, as lab-on-chip (LOC) to detect bacterial agents in clinical diagnostics applications.
Asunto(s)
Técnicas Biosensibles/métodos , Biblioteca de Péptidos , Staphylococcus aureus , Ensayo de Inmunoadsorción Enzimática , PéptidosRESUMEN
The design of hybrid poly-ε-caprolactone (PCL)-self-assembling peptides (SAPs) matrices represents a simple method for the surface functionalization of synthetic scaffolds, which is essential for cell compatibility. This study investigates the influence of increasing concentrations (2.5%, 5%, 10% and 15% w/w SAP compared to PCL) of three different SAPs on the physico-chemical/mechanical and biological properties of PCL fibers. We demonstrated that physico-chemical surface characteristics were slightly improved at increasing SAP concentrations: the fiber diameter increased; surface wettability increased with the first SAP addition (2.5%) and slightly less for the following ones; SAP-surface density increased but no change in the conformation was registered. These results could allow engineering matrices with structural characteristics and desired wettability according to the needs and the cell system used. The biological and mechanical characteristics of these scaffolds showed a particular trend at increasing SAP concentrations suggesting a prevailing correlation between cell behavior and mechanical features of the matrices. As compared with bare PCL, SAP enrichment increased the number of metabolic active h-osteoblast cells, fostered the expression of specific osteoblast-related mRNA transcripts, and guided calcium deposition, revealing the potential application of PCL-SAP scaffolds for the maintenance of osteoblast phenotype.
Asunto(s)
Osteoblastos/efectos de los fármacos , Péptidos/farmacología , Poliésteres/farmacología , Andamios del Tejido/química , Anciano , Calcio/metabolismo , Células Cultivadas , Humanos , Masculino , Osteoblastos/metabolismo , Péptidos/química , Poliésteres/química , ARN Mensajero/genética , ARN Mensajero/metabolismoRESUMEN
In this study, it was aimed to investigate the combinatory effect of biophysical and biochemical factors on human dental pulp stem cells' (hDPSCs) behavior. For this purpose, well-defined nanotopography of nanowells with two different pitch size of 109 nm and 341 nm were prepared on polyhydroxymethylsiloxane (PHMS) by using colloidal particles nanofabrication. The nanopatterned PHMS surfaces (PHMS/109 and PHMS/341) were subsequently used for fibronectin (Fn) adsorption. With this approach, nanotopographical details were combined with biochemical signals from Fn. Depending upon the size of cavities created by the nanowells, Fn molecules followed a site-selective adsorption. While they adsorbed both inside and outside the nanowells of PHMS/341, they preferred to adsorb outside the cavities of PHMS/109 surfaces. Human dental pulp stem cells were cultured on nanopatterned PHMS with or without Fn adsorption in the presence and absence of serum. Scanning electron microscopy and fluorescence microscopy analyses showed the interaction of cells was dependent on nanotopography size especially in serum-free medium. Furthermore, hDPSCs' morphology and cytoskeletal organization changed in correlation with preferential Fn adsorption. On Fn adsorbed PHMS/109 surfaces, cells displayed stretched bundles whereas, they showed extensive spreading and followed the Fn adsorbed sites inside the cavities of PHMS/341 surfaces. The observed effects are interpreted in terms of the preferential exposure of different Fn epitopes occurring on PHMS/109 and PHMS/341 as a consequence of the different hydrophilic/hydrophobic adsorbing surface.
Asunto(s)
Pulpa Dental/citología , Fibronectinas/química , Nanoestructuras/efectos adversos , Nanoestructuras/química , Células Madre/citología , Células Madre/efectos de los fármacos , Adhesión Celular/efectos de los fármacos , Línea Celular , Humanos , Propiedades de SuperficieRESUMEN
Cells are surrounded by a hyaluronan-rich coat called 'pericellular matrix' (PCM), mainly constituted by hyaluronan, a long-chain linear polysaccharide which is secreted and resorbed by the cell, depending on its activity. Cell attachment to a surface is mediated by PCM before integrins and focal adhesions are involved. As hyaluronan is known to bear a negative charge at physiological pH, the relevance of its electrical properties in driving the early cell adhesion steps has been studied, exploring how PCM mediates cell adhesion to charged surfaces, such as polyelectrolyte multilayer (PEM) films. Poly(ethylene imine) (PEI) and poly(sodium 4-styrene sulphonate) (PSS), assembled as PEI/PSS and PEI/PSS/PEI layers, were used. The nanoscale morphology of such layers was analysed by atomic force microscopy, and the detailed surface structure was analysed by X-ray photoemission spectroscopy. PCM-coated and PCM-depleted MG63 osteoblast-like cells were used, and cell density, morphology and adhesive structures were analysed during early steps of cell attachment to the PEM surfaces (1-6 h). The present study demonstrates that the pericellular matrix is involved in cell adhesion to material surfaces, and its arrangement depends on the cell interaction with the surface. Moreover, the PCM/surface interaction is not simply driven by electrostatic effects, as the cell response may be affected by specific chemical groups at the material surface. In the development of biomimetic surfaces promoting cell adhesion and function, the role of this unrecognised outer cell structure has to be taken into account.
Asunto(s)
Materiales Biocompatibles/farmacología , Matriz Extracelular/química , Ácido Hialurónico/química , Poliaminas/farmacología , Electricidad Estática , Materiales Biocompatibles/química , Adhesión Celular/efectos de los fármacos , Línea Celular Tumoral , Movimiento Celular/efectos de los fármacos , Humanos , Poliaminas/química , PolielectrolitosRESUMEN
The aggregation of human islet amyloid polypeptide (hIAPP) has been linked to beta-cell death in type II diabetes. Zinc present in secretory granules has been shown to affect this aggregation. A combination of EXAFS, NMR, and AFM experiments shows that the influence of zinc is most likely due to the stabilization of prefibrillar aggregates of hIAPP.
Asunto(s)
Polipéptido Amiloide de los Islotes Pancreáticos/química , Zinc/química , Humanos , Microscopía de Fuerza Atómica , Espectroscopía de Absorción de Rayos XRESUMEN
Water soluble amphiphilic calix[8]arenes have been found to form pH-responsive and reversible supramolecular hydrogels at sub-millimolar concentration. Depending on their upper rim functionalization, pH variations trigger hydrogelation under basic or acidic conditions. Studies on self-organization processes by atomic force microscopy (AFM) measurements on differently charged surfaces are reported.