Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Más filtros












Base de datos
Intervalo de año de publicación
1.
Nanoscale ; 15(32): 13233-13238, 2023 Aug 17.
Artículo en Inglés | MEDLINE | ID: mdl-37540202

RESUMEN

Clusters and oxo-clusters are drawing attention for their amazing physical properties, especially at the scale of the single molecule. However, chemical methods to organize them individually on a surface are still lacking. In this study we show that it is possible to periodically organize individual polyoxometalates thanks to their ordering by a new supramolecular assembly.

2.
ACS Appl Mater Interfaces ; 15(32): 38716-38728, 2023 Aug 16.
Artículo en Inglés | MEDLINE | ID: mdl-37523484

RESUMEN

We report the synthesis of a stable heterogeneous catalyst based on copper metal nanoparticles with oxidized surface supported on ZIF-8 for the oxidation of benzyl alcohol under mild temperature and using air as a sustainable oxygen source as well as for the implementation of the tandem "one-pot" catalytic system allowing the sustainable synthesis of benzylidene malononitrile. The influence of the reduction process applied to form the nanoparticle upon the catalyst texture and its performances was extensively examined. After ZIF-8 impregnation with a copper chloride precursor, the reduction of cupric ions into Cu0 nanoparticles was carried out according to two procedures: (i) by soaking the solid into a solution of NaBH4 and (ii) by submitting it to a flow of gaseous H2 at 340 °C. The in-depth physicochemical characterization and comparison of the resulting two types of Cu/ZIF-8 materials reveal significant differences: the reduction with NaBH4 led to the formation of 16 nm sized Cu0 nanoparticles (NP) mainly localized on the external surface of the ZIF-8 crystals together with ZnO nanocrystallites, while the reduction under H2 flow resulted in Cu0 nanoparticles with a mean size of 22 nm embedded within the bulk of ZIF-8 crystals. More, when NaBH4 was used to reduce cupric ions, ZnO particles were highlighted by high-resolution microcospy imaging. Formation of ZnO impurities was confirmed by the photoluminescence analysis of ZIF-8 after NaBH4 treatment. In contrast, ZnO was not detected on ZIF-8 treated with H2. Both types of Cu0 NPs supported on ZIF-8 were found to be active as catalysts toward the aerobic oxidation of benzyl alcohol under moderate temperature (T < 80 °C) and using air as a sustainable O2 source. Benzaldehyde yield of 66% and selectivity superior to 90% were obtained with the Cu/ZIF-8 catalyst prepared under H2 flow after 24 h under these conditions. The same material could be recycled 5 times without loss of activity, unlike the catalysts synthesized with NaBH4, as a result of the leaching of the surface copper NPs over the consecutive catalytic cycles. Finally, the most stable catalyst was successfully implemented in a tandem "one-pot" catalytic system associating benzyl alcohol oxidation and Knoevenagel condensation to synthesize benzylidene malononitrile.

3.
Talanta ; 255: 124245, 2023 Apr 01.
Artículo en Inglés | MEDLINE | ID: mdl-36610258

RESUMEN

We introduce here the engineering of nanobiosensors designed from gold nanorods coated with an ultrathin layer of silica (AuNR@SiO2) and biofunctionalized with antibodies for the Localized Surface Plasmon Resonance (LSPR) biosensing of proteins. Despite the outstanding properties of AuNRs, their use for LSPR biosensing is limited due to the presence of the surfactant cetyltrimethylammonium bromide (CTAB) - mandatory for their synthesis - which forms a strongly-bounded and positively-charged bilayer at their surface and significantly complicates their bio-functionalization. When coated with a thin layer of silica, these nanomaterials exhibit an improved sensitivity to refractive index change which augurs for better analytical performances. Here, we undertook an in-depth investigation of the biofunctionalization of AuNR@SiO2via three different routes to design and test a label-free LSPR biosensor operating in solution. In the first route, we took advantage of the negatively charged external silica shell to immobilize anti-rabbit IgG antibody by electrostatic physisorption. In the second and third routes, the silica surface was reacted with thiol or aldehyde terminated silanes, subsequently utilized to covalently attach anti-rabbit IgG antibody to the surface. The resulting nanoprobes were characterized by a wide range of physical methods (TEM, XPS, DLS, ELS and UV-Visible spectroscopy) then tested for the biosensing of rabbit-IgG. The three nanobiosensors maintain an excellent colloidal stability after analyte recognition and exhibit extremely high analytical performances in terms of specificity and dynamic range, with an LoD down to 12 ng/mL.


Asunto(s)
Técnicas Biosensibles , Nanotubos , Resonancia por Plasmón de Superficie/métodos , Oro/química , Dióxido de Silicio/química , Nanotubos/química , Inmunoglobulina G
4.
Front Bioeng Biotechnol ; 10: 1008436, 2022.
Artículo en Inglés | MEDLINE | ID: mdl-36406217

RESUMEN

As part of applications dealing with cardiovascular tissue engineering, drop-cast polyvinylidene fluoride (PVDF) scaffolds have been treated by cold plasma to enhance their adherence to cardiac cells. The scaffolds were treated in a dielectric barrier device where cold plasma was generated in a gaseous environment combining a carrier gas (helium or argon) with/without a reactive gas (molecular nitrogen). We show that an Ar-N2 plasma treatment of 10 min results in significant hydrophilization of the scaffolds, with contact angles as low as 52.4° instead of 132.2° for native PVDF scaffolds. Correlation between optical emission spectroscopy and X-ray photoelectron spectroscopy shows that OH radicals from the plasma phase can functionalize the surface scaffolds, resulting in improved wettability. For all plasma-treated PVDF scaffolds, the adhesion and maturation of primary cardiomyocytes is increased, showing a well-organized sarcomeric structure (α-actinin immunostaining). The efficacy of plasma treatment was also supported by real-time PCR analysis to demonstrate an increased expression of the genes related to adhesion and cardiomyocyte function. Finally, the biocompatibility of the PVDF scaffolds was studied in a cardiac environment, after implantation of acellular scaffolds on the surface of the heart of healthy mice. Seven and 28 days after implantation, no exuberant fibrosis and no multinucleated giant cells were visible in the grafted area, hence demonstrating the absence of foreign body reaction and the biocompatibility of these scaffolds.

5.
Nanoscale ; 14(24): 8691-8708, 2022 Jun 23.
Artículo en Inglés | MEDLINE | ID: mdl-35673929

RESUMEN

The extracellular matrix (ECM) of articular cartilage is a three-dimensional network mainly constituted of entangled collagen fibrils and interfibrillar aggrecan aggregates. During the development of osteoarthritis (OA), the most common musculoskeletal disorder, the ECM is subjected to a combination of chemical and structural changes that play a pivotal role in the initiation and the progress of the disease. While the molecular mechanisms involved in the pathological remodelling of the ECM are considered as decisive, they remain, however, not completely elucidated. Herein, we report a relevant way for unravelling the role and nature of OA progress on human cartilage tissues, in terms of chemical composition and morphological and mechanical properties at the level of supramolecular assemblies constituting the cartilage ECM. For this purpose, we used X-ray photoelectron spectroscopy (XPS), and developed an innovative methodological approach that provides the molecular composition of the ECM. Moreover, we used atomic force microscopy (AFM) to probe the tissues at the level of individual collagen fibrils, both imaging and force spectroscopy modes being explored to this end. Taken together, these nanoscale characterization studies reveal the existence of two stages in the OA progress. At the early stage, a marked increase in the aggrecan and collagen content is observed, reflecting the homeostatic chondrocyte activity that tends to repair the cartilage ECM. At the late stage, we observe a failed attempt to stabilize and/or restore the tissue, yielding significant degradation of the supramolecular assemblies. This suggests an imbalance in the chondrocyte activity that turns in favor of catabolic events. Chemical changes are also accompanied by ECM structural changes and stiffening. Interestingly, we showed the possibility to mimic the imbalanced activities of chondrocytes by applying enzymatic digestions of healthy cartilage, through the combined action of hyaluronidase and collagenase. This yields damage strictly analogous to that observed at high OA severity. These findings bring mechanistic insights leading to a better understanding of the mechanism by which OA is initiated and progresses in the cartilage ECM. They offer guidelines for the development of curative treatments, such as targeting the homeostatic balance of chondrocyte metabolism through the control of enzymatic reactions involved in catabolic processes.


Asunto(s)
Cartílago Articular , Osteoartritis , Agrecanos/metabolismo , Cartílago Articular/patología , Condrocitos , Colágeno/metabolismo , Matriz Extracelular/metabolismo , Humanos , Osteoartritis/patología
6.
ACS Sens ; 6(9): 3485-3493, 2021 09 24.
Artículo en Inglés | MEDLINE | ID: mdl-34436869

RESUMEN

Because the broadly consumed pain killer diclofenac (DCF) is a recognized pollutant, monitoring of its concentration is routinely performed in surface waters. As a valuable alternative to chromatographic and immunochemical assays, we developed a piezoelectric immunosensor to quantify DCF, first in buffer (PBS) and then in river water samples. A sensing layer comprising DCF was built up on the surface of silica-coated quartz sensors using a robust coupling chemistry. Binding of a highly affine monoclonal anti-DCF antibody was monitored in real time by quartz crystal microbalance with dissipation (QCM-D) measurements from which were determined a dissociation constant KD of 0.24 nM and an acoustic antibody surface coverage of 1120 ng/cm2 at saturation. On the other hand, an optical antibody surface coverage of 260 ng/cm2 was determined by combined nanoplasmonic sensing measurement, giving a hydration percentage of 75% for the antibody monolayer. DCF assay was further set up following a competitive format for which binding of antibody to the sensing layer is inhibited by DCF in solution. The piezoelectric sensor response expressed as frequency shift ΔF was inversely related to the concentration of DCF with a dynamic range of 15-46 nM and a limit of detection (LoD) of 9.5 nM (2.8 µg/L) in PBS. This piezoelectric immunosensor was eventually applied to the assay of DCF in surface water samples taken at three different locations in the Seine and Marne rivers. The calculated concentration of DCF in these samples was in good agreement with official data published by the French center of water analysis eaufrance.


Asunto(s)
Técnicas Biosensibles , Recursos Hídricos , Acústica , Diclofenaco , Inmunoensayo
7.
Mater Sci Eng C Mater Biol Appl ; 118: 111537, 2021 Jan.
Artículo en Inglés | MEDLINE | ID: mdl-33255090

RESUMEN

Aseptic loosening and bacterial infections are the two main causes of failure for metallic implants used for joint replacement. A coating that is both bioactive and possesses antimicrobial properties may address such shortcomings and improve the performance of the implant. We have sought to study the properties of combining hydroxyapatite-based nanoparticles or coatings with baicalein, a plant-extracted molecule with both antibacterial and antioxidant properties. (B-type) carbonated hydroxyapatite nanoparticles prepared by a chemical wet method could subsequently adsorbed by soaking in a baicalein solution. The amount of adsorbed baicalein was determined to be 63 mg.g-1 by thermogravimetric measurements. In a second approach, baicalein was adsorbed on a biomimetic calcium-deficient hydroxyapatite planar coating (12 µm thick) deposited on Ti6Al4V alloy from an aqueous solution of calcium, phosphate, sodium and magnesium salts. Soaking of the hydroxyapatite coated on titanium alloy in a baicalein solution induced partial dissolution/remodeling of the upper surface of the coating. However, the observed remodeling of the surface was much more pronounced in the presence of a baicalein solution, compared to pure water. The presence of adsorbed baicalein on the HAp layer, although it could not be precisely quantified, was assessed by XPS and fluorescence analysis. Planar coatings exhibited significant antibacterial properties against Staphylococcus epidermidis. Baicalein-modified nanoparticles exhibited significant antioxidant properties. These results illustrate the potential of hydroxyapatite used as a carrier for natural biologically-active molecules and also discuss the challenges associated with their applications as antibacterial agents.


Asunto(s)
Durapatita , Nanopartículas , Antibacterianos/farmacología , Antioxidantes/farmacología , Materiales Biocompatibles Revestidos/farmacología , Flavanonas , Propiedades de Superficie , Titanio
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...