3D finger vein biometric authentication with photoacoustic tomography.

Biometric authentication is the recognition of human identity via unique anatomical features. The development of novel methods parallels widespread application by consumer devices, law enforcement, and access control. In particular, methods based on finger veins, as compared to face and fingerprints, obviate privacy concerns and degradation due to wear, age, and obscuration. However, they are two-dimensional (2D) and are fundamentally limited by conventional imaging and tissue-light scattering. In this work, for the first time, to the best of our knowledge, we demonstrate a method of three-dimensional (3D) finger vein biometric authentication based on photoacoustic tomography. Using a compact photoacoustic tomography setup and a novel recognition algorithm, the advantages of 3D are demonstrated via biometric authentication of index finger vessels with false acceptance, false rejection, and equal error rates <1.23%, <9.27%, and <0.13%, respectively, when comparing one finger, a false acceptance rateimprovement>10× when comparing multiple fingers, and <0.7% when rotating fingers ±30.

Utilizing adaptive optics to mitigate intra-modal-group power coupling of graded-index few-mode fiber in a 200-Gbit/s mode-division-multiplexed link.

We experimentally demonstrate the utilization of adaptive optics (AO) to mitigate intra-group power coupling among linearly polarized (LP) modes in a graded-index few-mode fiber (GI FMF). Generally, in this fiber, the coupling between degenerate modes inside a modal group tends to be stronger than between modes belonging to different groups. In our approach, the coupling inside the LP11 group can be represented by a combination of orbital-angular-momentum (OAM) modes, such that reducing power coupling in OAM set tends to indicate the capability to reduce the coupling inside the LP11 group. We employ two output OAM modes l=+1 and l=-1 as resultant linear combinations of degenerate LP11a and LP11b modes inside the LP11 group of a ∼0.6-km GI FMF. The power coupling is mitigated by shaping the amplitude and phase of the distorted OAM modes. Each OAM mode carries an independent 20-, 40-, or 100-Gbit/s quadrature-phase-shift-keying data stream. We measure the transmission matrix (TM) in the OAM basis within LP11 group, which is a subset of the full LP TM of the FMF-based system. An inverse TM is subsequently implemented before the receiver by a spatial light modulator to mitigate the intra-modal-group power coupling. With AO mitigation, the experimental results for l=+1 and l=-1 modes show, respectively, that (i) intra-modal-group crosstalk is reduced by >5.8dB and >5.6dB and (ii) near-error-free bit-error-rate performance is achieved with a penalty of ∼0.6dB and ∼3.8dB, respectively.

High-dimensional Stokes vector direct detection over few-mode fibers.

Direct detection attracts much attention for its simplicity compared with coherent detection. In this Letter, we propose for the first time, to the best of our knowledge, a high-dimensional Stokes vector direct detection (HD-SVDD) receiver for mode-division multiplexing transmission in few-mode fibers where the coupled modes can be recovered without resorting to coherent detection. To the best of our knowledge, the first high-dimensional Stokes vector reception based on the proposed HD-SVDD receiver has been successfully demonstrated with a dual-spatial and dual-polarization mode at 60 Gb/s over a 200 m two-mode fiber.

Multi-parameter distributed fiber sensing with higher-order optical and acoustic modes.

We propose a novel multi-parameter sensing technique based on a Brillouin optical time domain reflectometry in the elliptical-core few-mode fiber, using higher-order optical and acoustic modes. Multiple Brillouin peaks are observed for the backscattering of both the LP01 mode and LP11 mode. We characterize the temperature and strain coefficients for various optical-acoustic mode pairs. By selecting the proper combination of modes pairs, the performance of multi-parameter sensing can be optimized. Distributed sensing of temperature and strain is demonstrated over a 0.5-km elliptical-core few-mode fiber, with the discriminative uncertainty of 0.28°C and 5.81 µÎµ for temperature and strain, respectively.

Coherent optical wireless communication link employing orbital angular momentum multiplexing in a ballistic and diffusive scattering medium.

We experimentally investigate the scattering effect on an 80 Gbit/s orbital angular momentum (OAM) multiplexed optical wireless communication link. The power loss, mode purity, cross talk, and bit error rate performance are measured and analyzed for different OAM modes under scattering levels from ballistic to diffusive regions. Results show that (i) power loss is the main impairment in the ballistic scattering, while the mode purities of different OAM modes are not significantly affected; (ii) in the diffusive scattering, however, the performance of an OAM-multiplexed link further suffers from the increased cross talk between the different OAM modes.

Photonic lantern broadband orbital angular momentum mode multiplexer.

Optical vortex beams that carry orbital angular momentum (OAM), also known as OAM modes, have attracted considerable interest in recent years as they can comprise an additional degree of freedom for a variety of advanced classical and quantum optical applications. While canonical methods of OAM mode generation are effective, a method that can simultaneously generate and multiplex OAM modes with low loss and over broad spectral range is still in great demand. Here, via novel design of an optical fiber device referred to as a photonic lantern, where the radial mode index ("m") is neglected, for the first time we demonstrate the simultaneous generation and multiplexing of OAM modes with low loss and over the broadest spectral range to date (550 nm). We further confirm the potential of this approach to preserve the quality of studied OAM modes by fusion splicing the end-facet of the fabricated device to a delivery ring-core fiber (RCF).

Stability of Ince-Gaussian beams in elliptical core few-mode fibers.

A comparative stability analysis of Ince-Gaussian and Hermite-Gaussian modes in elliptical core few-mode fibers is provided to inform the design of spatial division multiplexing systems. The correlation method is used to construct crosstalk matrices that characterize the spatial modes of the fiber. Up to six low-order modes are shown to exhibit about -20 dB crosstalk. The crosstalk performance of each mode set is found to be similar. However, a direct comparison between modes of equal Gouy phase shift, a parameter that ensures identical beam quality, and phase at the detector, demonstrates better relative power transmission for Ince-Gaussian beams. This result is consistent with the natural modes supported by a 100 m elliptical core fiber for which a mode ellipticity of ϵ=2 was found to be optimal. The relative power difference is expected to be magnified over longer fiber lengths in favor of Ince-Gaussian modes.

Discrimination of Temperature and Strain in Brillouin Optical Time Domain Analysis Using a Multicore Optical Fiber.

Brillouin optical time domain analysis is the sensing of temperature and strain changes along an optical fiber by measuring the frequency shift changes of Brillouin backscattering. Because frequency shift changes are a linear combination of temperature and strain changes, their discrimination is a challenge. Here, a multicore optical fiber that has two cores is fabricated. The differences between the cores' temperature and strain coefficients are such that temperature (strain) changes can be discriminated with error amplification factors of 4.57 °C/MHz (69.11 µ ϵ /MHz), which is 2.63 (3.67) times lower than previously demonstrated. As proof of principle, using the multicore optical fiber and a commercial Brillouin optical time domain analyzer, the temperature (strain) changes of a thermally expanding metal cylinder are discriminated with an error of 0.24% (3.7%).

Using a complex optical orbital-angular-momentum spectrum to measure object parameters.

Light beams can be characterized by their complex spatial profiles in both intensity and phase. Analogous to time signals, which can be decomposed into multiple orthogonal frequency functions, a light beam can also be decomposed into a set of spatial modes that are taken from an orthogonal basis. Such decomposition can potentially provide a tool for spatial spectrum analysis, which may enable stable, accurate, and robust extraction of physical object information that may not be readily achievable using traditional approaches. As a proof-of-concept example, we measure an object's opening angle using orbital-angular-momentum (OAM) -based complex spectrum, achieving a >15 dB signal-to-noise ratio. Moreover, the dip (i.e., notch) positions of the OAM intensity spectrum are dependent on an object's opening angle but independent of the opening's angular orientation, whereas the slope of the OAM phase spectrum is dependent on the opening's orientation but independent of the opening angle.

Comparing mode-crosstalk and mode-dependent loss of laterally displaced orbital angular momentum and Hermite-Gaussian modes for free-space optical communication.

There is interest in using orbital angular momentum (OAM) modes to increase the data speed of free-space optical communication. A prevalent challenge is the mitigation of mode-crosstalk and mode-dependent loss that is caused by the modes' lateral displacement at the data receiver. Here, the mode-crosstalk and mode-dependent loss of laterally displaced OAM modes (LG0,+1, LG0,-1) are experimentally compared to that of a Hermite-Gaussian (HG) mode subset (HG0,1, HG1,0). It is shown, for an aperture larger than the modes' waist sizes, some of the HG modes can experience less mode-crosstalk and mode-dependent loss when laterally displaced along a symmetry axis. It is also shown, over a normal distribution of lateral displacements whose standard deviation is 2× the modes' waist sizes, on average, the HG modes experience 66% less mode-crosstalk and 17% less mode-dependent loss.

Mode crosstalk matrix measurement of a 1 km elliptical core few-mode optical fiber.

The spatial modes of a 1 km elliptical core few-mode optical fiber (6 spatial modes) are analyzed by using liquid crystal on silicon spatial light modulators to measure the fiber's mode crosstalk matrix in Hermite-Gaussian, Laguerre-Gaussian, and linearly polarized spatial mode bases. It is shown that the fiber's spatial modes can be described by Hermite-Gaussian modes, which can propagate 1 km over the optical fiber with <-20 dB (1%) average mode crosstalk even when the fiber has multiple 1 cm diameter bends. The use of elliptical core few-mode optical fibers for space division multiplexing in data centers is discussed.

Using the nonseparability of vector beams to encode information for optical communication.

In this work, it is experimentally demonstrated that the nonseparability of vector beams (e.g., radial and azimuthal polarization) can be used to encode information for optical communication. By exploiting the nonseparability of a vector beam's space and polarization degrees of freedom using conventional wave plates, it is shown that 2 bits of information can be encoded when applying the identity and three Pauli operators to its polarization degree of freedom. It is also shown that vector beams can be efficiently decoded with as low as 2.7% cross talk using a Mach-Zehnder interferometer that exploits a higher-order Pancharatnam-Berry phase and liquid crystal q-plates.

Mode division multiplexing using an orbital angular momentum mode sorter and MIMO-DSP over a graded-index few-mode optical fibre.

Mode division multiplexing (MDM)- using a multimode optical fiber's N spatial modes as data channels to transmit N independent data streams - has received interest as it can potentially increase optical fiber data transmission capacity N-times with respect to single mode optical fibers. Two challenges of MDM are (1) designing mode (de)multiplexers with high mode selectivity (2) designing mode (de)multiplexers without cascaded beam splitting's 1/N insertion loss. One spatial mode basis that has received interest is that of orbital angular momentum (OAM) modes. In this paper, using a device referred to as an OAM mode sorter, we show that OAM modes can be (de)multiplexed over a multimode optical fiber with higher than -15 dB mode selectivity and without cascaded beam splitting's 1/N insertion loss. As a proof of concept, the OAM modes of the LP11 mode group (OAM-1,0 and OAM+1,0), each carrying 20-Gbit/s polarization division multiplexed and quadrature phase shift keyed data streams, are transmitted 5km over a graded-index, few-mode optical fibre. Channel crosstalk is mitigated using 4 × 4 multiple-input-multiple-output digital-signal-processing with <1.5 dB power penalties at a bit-error-rate of 2 × 10(-3).

Detecting Lateral Motion using Light's Orbital Angular Momentum.

Interrogating an object with a light beam and analyzing the scattered light can reveal kinematic information about the object, which is vital for applications ranging from autonomous vehicles to gesture recognition and virtual reality. We show that by analyzing the change in the orbital angular momentum (OAM) of a tilted light beam eclipsed by a moving object, lateral motion of the object can be detected in an arbitrary direction using a single light beam and without object image reconstruction. We observe OAM spectral asymmetry that corresponds to the lateral motion direction along an arbitrary axis perpendicular to the plane containing the light beam and OAM measurement axes. These findings extend OAM-based remote sensing to detection of non-rotational qualities of objects and may also have extensions to other electromagnetic wave regimes, including radio and sound.

SDM transmission of real-time 10GbE traffic using commercial SFP + transceivers over 0.5km elliptical-core few-mode fiber.

We experimentally demonstrate the first few-mode space division multiplexed (SDM) transmission of real-time 10Gb/s Ethernet (10GbE) traffic using commercial small form-factor pluggable SFP + transceivers without coherent detection or multiple input multiple output digital signal processing (MIMO-DSP) over 0.5km elliptical-core few-mode-fiber, achieving <-26dB crosstalk between LP(11e) and LP(11o) modes at 1.3µm.

4 × 20 Gbit/s mode division multiplexing over free space using vector modes and a q-plate mode (de)multiplexer.

Vector modes are spatial modes that have spatially inhomogeneous states of polarization, such as, radial and azimuthal polarization. In this work, the spatially inhomogeneous states of polarization of vector modes are used to increase the transmission data rate of free-space optical communication via mode division multiplexing. A mode (de)multiplexer for vector modes based on a liquid crystal q-plate is introduced. As a proof of principle, four vector modes each carrying a 20-Gbit/s quadrature phase shift keying signal (aggregate 80 Gbit/s) on a single wavelength channel (λ∼1550 nm) were transmitted ∼1 m over the lab table with <-16.4 dB mode crosstalk. Bit error rates for all vector modes were measured at the 7% forward error correction threshold with power penalties <3.41 dB.

All-digital wavefront sensing for structured light beams.

We present a new all-digital technique to extract the wavefront of a structured light beam. Our method employs non-homogeneous polarization optics together with dynamic, digital holograms written to a spatial light modulator to measure the phase relationship between orthogonal polarization states in real-time, thereby accessing the wavefront information. Importantly, we show how this can be applied to measuring the wavefront of propagating light fields, over extended distances, without any moving components. We illustrate the versatility of the tool by measuring propagating optical vortices, Bessel, Airy and speckle fields. The comparison of the extracted and programmed wavefronts yields excellent agreement.

Tunable supercontinuum light vector vortex beam generator using a q-plate.

Spatially coherent multicolored optical vector vortex beams were created using a tunable liquid crystal q-plate and a supercontinuum light source. The feasibility of the q-plate as a tunable spectral filter (switch) was demonstrated, and the polarization topology of the resulting vector vortex beam was mapped. Potential applications include multiplexing for broadband high-speed optical communication, ultradense data networking, and super-resolution microscopy.

Higher order Pancharatnam-Berry phase and the angular momentum of light.

The first experimental demonstration of a new Pancharatnam-Berry phase for light beams with spatially inhomogeneous, or vector, states of polarization referred to as the higher-order Pancharatnam-Berry phase is presented. This new geometric phase is proportional to light's total angular momentum, a sum of spin and higher dimensional orbital angular momentum, sharply contrasting the well-known Pancharatnam-Berry phase associated with the plane wave state of polarization of a spatially homogeneous light beam. The higher-order Pancharatnam-Berry phase is directly related to the rotational symmetry of a vortex-bearing electromagnetic field, associated with the rotational frequency shift of a light beam, and has implications in quantum information science as well as other physical systems such as electron vortex beams.

Manifestation of the Gouy phase in vector-vortex beams.

Experimental measurements of the twirl and changes in the anisotropy of the constant intensity ellipse, and the rotation of the polarization singular lemon pattern a generalized vector-vortex beam experiences around the two foci due to the converging and diverging conical waves and in between, are presented and interpreted as being due to the universal form of the Gouy phase, φ(G)=mπ/2.