RESUMEN
High load-bearing capacity is one of the crucial indicators for liquid superlubricants to move toward practicality. However, some of the current emerging systems not only have low contact pressures but also are highly susceptible to further degradation due to water adsorption and even superlubricity failure. Herein, a novel choline chloride-based ionic liquid analogues (ILAs) of a superlubricant with triethanolamine (TEOA) as the H-bond donor is reported for the first time; it obtains an ultralow coefficient of friction (0.005) and high load-bearing capacity (360 MPa, more than 2 times that of similar systems) due to adsorption of a small amount of water (<5 wt %) from the air. In situ Raman combined with 1H NMR and FTIR techniques reveals that adsorbed water competes with the hydroxyl group of TEOA for coordination with Cl-, leading to the conversion of some strong H-bonds to weak H-bonds in ILAs; the localized strong H-bonds and weak H-bonds endow the ILAs with high load-bearing capacity and the formation of ultralow shear-resistance sliding interfaces, respectively, under the shear motion. This study proposes a strategy to modulate the interactions between liquid species using adsorbed water from air as a competing ligand, which provides new insights into the design of ILA-based macroscopic liquid superlubricants with a high load-bearing capacity.
RESUMEN
With the development of the integrated circuit and chip industry, electronic products and their components are becoming increasingly miniaturized, high-frequency, and low-loss. These demand higher requirements for the dielectric properties and other aspects of epoxy resins to develop a novel epoxy resin system that meets the needs of current development. This paper employs ethyl phenylacetate cured dicyclopentadiene phenol (DCPD) epoxy resin as the matrix and incorporates KH550 coupling-agent-treated SiO2 hollow glass microspheres to produce composite materials with low dielectric, high heat resistance, and high modulus. These materials are applied as insulation films for high density interconnect (HDI) and substrate-like printed circuit board (SLP) boards. The Fourier transform infrared spectroscopy (FTIR) technique was used to characterize the reaction between the coupling agent and HGM, as well as the curing reaction between the epoxy resin and ethyl phenylacetate. The curing process of the DCPD epoxy resin system was determined using differential scanning calorimetry (DSC). The various properties of the composite material with different HGM contents were tested, and the mechanism of the impact of HGM on the properties of the composite material was discussed. The results indicate that the prepared epoxy resin composite material exhibits good comprehensive performance when the HGM content is 10 wt.%. The dielectric constant at 10 MHz is 2.39, with a dielectric loss of 0.018. The thermal conductivity is 0.1872 Wm-1 k-1, the coefficient of thermal expansion is 64.31 ppm/K, the glass transition temperature is 172 °C, and the elastic modulus is 1221.13 MPa.
RESUMEN
Membrane separation technology represented by graphene oxide (GO) membranes has been widely used in lithium extraction from salt lakes. It is extraordinary to study the extraction of Li+ by GO membranes from the perspective of the confined mass transfer effect. This study establishes a GO channel model with the confined mass transfer effect to closely fit the actual mass transfer process. Meanwhile, this study investigates the dynamic fluid characteristics in the separation of Li+/Mg2+ by GO membranes using molecular dynamics simulations. The results showed that the Li+/Mg2+ separation ratio is maximum at 1.0 nm layer spacing and 10% oxidation degree of the GO membrane. Water molecules form a bilayer within the channel at the appropriate interlayer channel (1 nm) and oxidation level (10%), which accelerates the ion transport rate. Furthermore, the GO oxidation group has the weakest hydrogen bonding effect on water which promotes the passage of water. Finally, the maximum separation ratio is reached due to the fact that the binding force of Li+ to water molecules in the channel is lower than that of Mg2+. The results of this study will provide theoretical consideration for the design of high-performance Li+/Mg2+ separation membranes.
RESUMEN
Core-shell structure has been receiving extensive attention to enhance the electromagnetic wave (EMW) absorption performance due to its unique interface effect. In this paper, a micro-flower like ZnCo@C@1T-2H-MoS2 was prepared through MOF self-template method. The introduction 1T-2H-MoS2 shell helps optimize impedance matching of the CoZn@C particles to improve the EMW absorption ability. The minimal reflection loss (RLmin) value of ZnCo@C@1T-2H-MoS2 is -35.83â¯dB with a thickness of 5.0â¯mm at 5.83â¯GHz and the effective absorption (RLâ¯<â¯-10â¯dB) bandwidth up to 4.56â¯GHz at 2.0â¯mm thickness. Meanwhile, the overall effective absorption bandwidth (OEAB) can reach up to 13.44â¯GHz from 4.56 to 18.0â¯GHz. Moreover, ultrafast photothermal performances are also achieved, which can guarantee the normal functioning of ZnCo@C@1T-2H-MoS2 materials in cold conditions. The excellent EMW absorption and photothermal performance are attributed to the unique structure designed with the core of magnetic ZnCo@C rhombic dodecahedral and the shell of dielectric micro-flower like 1T-2H-MoS2 optimize impedance matching.
Asunto(s)
Radiación Electromagnética , Molibdeno , Impedancia EléctricaRESUMEN
Molybdenum disulfide (MoS2) has possession of a layered structure and high theoretical capacity, which is a candidate anode material for sodium ion batteries. However, unmodified MoS2 are inflicted with a poor cycling stability and an inferior rate capability upon charge/discharge processes. Considering that the shape and size of anode materials play a key role in the performance of anode materials, this paper proposes a multi-level composite structure formed by the micro-nano materials based on self-assembled molybdenum disulfide (MoS2) nanoflowers, Mxene and hollow carbonized kapok fiber (CKF). The micro-nano materials can be connected to form heterojunction and agglomeration can be avoided. The load bearing of heterostructure and stress release of CKF are coordinated to form a double protection mechanism, which improves the conductivity and structural stability of hybrid materials. Based on the above advantages, it has higher specific capacity than pure MoS2, and has better rate performance (639.3, 409.5, 386.2, 372, 338, 422.8 and 434.7 mAh g-1 at the current density of 0.05, 0.1, 0.2, 0.5, 1 ,0.1 and 0.05 A·g-1, respectively). The stress-modulated strategies can provide new insights for the design and construction of transition metal sulfides heterostructures to achieve high performance sodium ion batteries.
RESUMEN
Hard carbon (HC) has attracted considerable attention in the application of sodium-ion battery (SIB) anodes, but the poor realistic capacity and low rate performance severely hinder their practical application. Herein we report a solvent mechanochemical protocol for the in situ fabrication of the HC-MXene/TiO2 electrode by functionalizing MXene to improve the electrochemical performance of the batteries. MXene (Ti3C2Tx) with abundant oxygen-containing functional groups reacts with HC particles in the ball milling process to form a Ti-O-C covalent cross-linked HC-MXene composite, in which the edge of the MXene nanosheets is in situ oxidized by air to form TiO2 nanorods, forming a regular 1D/2D MXene/TiO2 heterojunction structure. Ti-O-C covalent bonding can protect the heterojunction structures from pulverization and detachment from the current collector during charge/discharge cycles due to sodium-ion intercalation/detachment, thus improving the stability of the electrode structure. Meanwhile, the MXene/TiO2 heterojunction can form a 3D conductive network and provide more active sites. The resulting HC-MXene/TiO2 electrode exhibits superior electrode capacity (660 mAh g-1), making it a promising anode material for SIBs. This simple and efficient method for preparing MXene/TiO2 heterojunction-decorated HC provides a new perspective on the structural design of MXene and carbon material composites for SIBs.
RESUMEN
The reduced graphene/poly(vinylidene fluoride) nanocomposite films were prepared by the solution casting-thermal reduction process using graphene oxide (GO) and poly(vinylidene fluoride) (PVDF) resin. With the presence of reduced graphene (RG) nano sheets in the nanocomposite, the structure of PVDF is transformed from alpha to beta phase, and the beta phase fraction and its crystallinity are largely affected by the RG content. The PVDF thermal stability is improved by the RG introduction, with about 15 degrees C increase of the half-life of PVDF decomposition temperature. The RG/PVDF nanocomposites show a better electrical conductivity than that for the GO/PVDF nanocomposites. At a low RG content (0.8 wt.%), the dielectric constant of RG/PVDF nanocomposite film with a very low loss tangent is dramatically increased from about 6 to 23. The mechanisms for the thermal stability and electrical property improvements are discussed.