RESUMEN
Uniform tensile ductility (UTD) is crucial for the forming/machining capabilities of structural materials. Normally, planar-slip induced narrow deformation bands localize the plastic strains and hence hamper UTD, particularly in body-centred-cubic (bcc) multi-principal element high-entropy alloys (HEAs), which generally exhibit early necking (UTD < 5%). Here we demonstrate a strategy to tailor the planar-slip bands in a Ti-Zr-V-Nb-Al bcc HEA, achieving a 25% UTD together with nearly 50% elongation-to-failure (approaching a ductile elemental metal), while offering gigapascal yield strength. The HEA composition is designed not only to enhance the B2-like local chemical order (LCO), seeding sites to disperse planar slip, but also to generate excess lattice distortion upon deformation-induced LCO destruction, which promotes elastic strains and dislocation debris to cause dynamic hardening. This encourages second-generation planar-slip bands to branch out from first-generation bands, effectively spreading the plastic flow to permeate the sample volume. Moreover, the profuse bands frequently intersect to sustain adequate work-hardening rate (WHR) to large strains. Our strategy showcases the tuning of plastic flow dynamics that turns an otherwise-undesirable deformation mode to our advantage, enabling an unusual synergy of yield strength and UTD for bcc HEAs.
RESUMEN
Crystalline-amorphous composite have the potential to achieve high strength and high ductility through manipulation of their microstructures. Here, we fabricate a TiZr-based alloy with micrometer-size equiaxed grains that are made up of three-dimensional bicontinuous crystalline-amorphous nanoarchitectures (3D-BCANs). In situ tension and compression tests reveal that the BCANs exhibit enhanced ductility and strain hardening capability compared to both amorphous and crystalline phases, which impart ultra-high yield strength (~1.80 GPa), ultimate tensile strength (~2.3 GPa), and large uniform ductility (~7.0%) into the TiZr-based alloy. Experiments combined with finite element simulations reveal the synergetic deformation mechanisms; i.e., the amorphous phase imposes extra strain hardening to crystalline domains while crystalline domains prevent the premature shear localization in the amorphous phases. These mechanisms endow our material with an effective strength-ductility-strain hardening combination.
RESUMEN
The loss of ductility with temperature has been widely observed in tensile tests of single-phase face-centered cubic structured high-entropy alloys (HEAs). However, the fundamental mechanism for such a ductility loss remains unknown. Here, we show that ductility loss in the CrMnFeCoNi HEA upon deformation at intermediate temperatures is correlated with cracking at grain boundaries (GBs). Nanoclustering Cr, Ni, and Mn separately at GBs, as detected by atom probe tomography, reduces GB cohesion and promotes crack initiation along GBs. We further demonstrated a GB segregation engineering strategy to avoid ductility loss by shifting the fast segregation of principal elements from GBs into preexisting Cr-rich secondary phases. We believe that GB decohesion by nanoclustering multiprincipal elements is a common phenomenon in HEAs. This study not only provides insights into understanding ductility loss but also offers a strategy for tailoring ductility-temperature relations in HEAs.
