α,α'-Diarylacenaphtho[1,2-c]phosphole P-oxides: divergent synthesis and application to cathode buffer layers in organic photovoltaics.

A divergent method for the synthesis of α,α'-diarylacenaphtho[1,2-c]phosphole P-oxides has been established; α,α'-dibromoacenaphtho[c]phosphole P-oxide, which was prepared through a Ti(II)-mediated cyclization of 1,8-bis(trimethylsilylethynyl)naphthalene, underwent a Stille coupling with three different kinds of aryltributylstannanes to afford the α,α'-diarylacenaphtho[c]phosphole P-oxides in moderate to good yields. X-ray crystallographic analyses and UV/Vis absorption/fluorescence measurements have revealed that the degree of π-conjugation, the packing motif, the electron-accepting ability, and the thermal stability of the acenaphtho[c]phosphole π-systems are finely tunable with the α-aryl substituents. All the P=O and P=S derivatives exhibited high stability in their electrochemically reduced state. To use this class of arene-fused phosphole π-systems as n-type semiconducting materials, we evaluated device performances of the bulk heterojunction organic photovoltaics (OPV) that consist of poly(3-hexylthiophene), an indene-C(70) bisadduct, and a cathode buffer layer. The insertion of the diarylacenaphtho[c]phosphole P-oxides as the buffer layer was found to improve the power conversion efficiency of the polymer-based OPV devices.

Comparative study on the structural, optical, and electrochemical properties of bithiophene-fused benzo[c]phospholes.

Three types of bithiophene-fused benzo[c]phospholes were successfully prepared by Ti(II)-mediated cyclization of the corresponding dialkynylated bithiophene derivatives as a key step. Each sigma(3)-phosphorus center of the benzo[c]phosphole subunits was readily transformed into sigma(4)-phosphorus center by Au coordination or oxygenation. In addition, the bithiophene subunit was functionalized at the alpha,alpha'-carbon atoms by Pd-catalyzed cross-coupling reactions with heteroarylmetals and by an S(N)Ar reaction with hexafluorobenzene. The experimentally observed results (NMR spectroscopy, X-ray analysis, UV/Vis absorption/fluorescence spectroscopy, and cyclic/differential-pulse voltammetry) have revealed that the structural, optical, and electrochemical properties of the bithiophene-fused benzo[c]phospholes vary considerably depending on the pi-conjugation modes at the bithiophene subunits and the substituents of the heterocyclopentadiene components. The appropriately ring-annulated sigma(3)-P derivatives and sigma(4)-P-AuCl complexes were found to emit fluorescence in the orange-red region, and the sigma(4)-P-oxo derivatives proved to undergo reversible one-electron reduction at -1.4 to -1.8 V (vs ferrocene/ferrocenium). These results indicate that the bithiophene-fused benzo[c]phospholes possess narrow HOMO-LUMO gaps and low-lying LUMOs, which was confirmed by density functional theory calculations of their model compounds. The time-of-flight measurement of an ITO/benzo[c]phosphole/Al device showed that the electron mobility in the P-oxo derivative is one-order higher than that in Alq(3) at low electric fields. The present study demonstrates that the arene-fused benzo[c]phosphole skeleton could be a highly promising platform for the construction of a new class of phosphole-based optoelectrochemical materials.

Synthesis of thiophene-containing hybrid calixphyrins of the 5,10-porphodimethene type.

The synthesis, structure, and optical and electrochemical properties of thiophene-containing hybrid calixphyrins are reported. The 5,10-porphodimethene type 14pi- and 16pi-S,N2,X-hybrid calixphyrins (X = NH, O, S) were prepared by acid-promoted dehydrative condensation between a thiatripyrrane and the corresponding 2,5-bis[hydroxy(phenyl)methyl]heteroles followed by DDQ oxidation. Both crystallographic and spectroscopic analyses of the newly prepared hybrid calixphyrins have revealed that the combination of heteroles explicitly influences the electronic structures of the pi-conjugated framework. The 14pi-S,N2,X-hybrid calixphyrins have proven to be fluorescent in solution.

Syntheses, structures, and coordination chemistry of phosphole-containing hybrid calixphyrins: promising macrocyclic P,N2,X-mixed donor ligands for designing reactive transition-metal complexes.

The syntheses, structures, and coordination chemistry of phosphole-containing hybrid calixphyrins (P,N2,X-hybrid calixphyrins) and the catalytic activities of their transition-metal complexes are reported. The 5,10-porphodimethene type 14pi-P,(NH)2,X- and 16pi-P,N2,X-hybrid calixphyrins (X = O, S, NH) are prepared via acid-promoted dehydrative condensation between a sigma4-phosphatripyrrane and the corresponding 2,5-bis[hydroxy(phenyl)methyl]heteroles followed by DDQ oxidation. Both spectroscopic and crystallographic data of the hybrid calixphyrins have revealed that the conformation and size of the macrocyclic platforms as well as the oxidation state of the -conjugated pyrrole-heterole-pyrrole (N-X-N) units vary considerably depending on the combination of heteroles. The sigma3-P,(NH)2,S- and sigma3-P,N2,S-hybrids react with Pd(OAc)2 and Pd(dba)2, respectively, to afford the same Pd(II)-P,N2,S-hybrid complex, in which the calixphyrin platform is regarded as a dianionic ligand. In the complexation with [RhCl(CO)2]2 in dichloromethane, the sigma3-P,N2,S-hybrid behaves as a neutral ligand to afford an ionic Rh(I)-P,N2,S-hybrid complex, whereas the sigma3-P,N2,NH-hybrid behaves as an anionic ligand to produce Rh(III)-P,N3-hybrid complexes. In the latter reaction, it is likely that a neutral Rh(I)-P,N3-hybrid complex, generated as a highly nucleophilic intermediate, undergoes C-Cl bond activation of the solvent. The complexation of AuCl(SMe2) with the sigma3-P,N2,X-hybrids (X = S, NH) leads to the formation of the corresponding Au(I)-monophosphine complexes. The spectral data and crystal structures of these metal complexes exhibit the hemilabile nature of the phosphole-containing hybrid calixphyrin platforms derived from the flexible phosphole unit and the redox active N-X-N units. The hybrid calixphyrin-palladium and -rhodium complexes catalyze the Heck reaction and hydrosilylations, respectively, implying that the metal center in the core is capable of activating the substrates under appropriate reaction conditions. The present results demonstrate the potential utility of the phosphole-containing hybrid calixphyrins as a new class of macrocyclic P,N2,X-mixed donor ligands for designing highly reactive transition-metal complexes.

Synthesis of 2-aryl-5-styrylphospholes: promising candidates for the phosphole-based NLO chromophores.

2-Aryl-1-phenyl-5-styrylphospholes were prepared in good yields in a one-pot procedure from the corresponding 1,9-diarylnona-8-ene-1,6-diynes and dichloro(phenyl)phosphine via intermediary titanacyclopentadienes. According to the UV-vis absorption and fluorescence spectra of this class of compounds, the optical properties of the phosphole-vinylene-bridged pi-conjugated system have been revealed to depend strongly on the electronic character of the terminal functionalities. In particular, the polarizability at the excited-state has been found to be considerably greater than that in the ground state. High molecular hyperpolarizabilities obtained for the push-pull type of 2-aryl-5-styrylphospholes in the hyper-Rayleigh scattering measurements demonstrate the potential utility of the stilbene-type phosphole derivatives as a new class of second-order NLO chromophores.

Synthesis of a phosphorus-containing hybrid porphyrin.

A phosphorus-containing hybrid porphyrin was successfully prepared via the BF3-promoted dehydrative condensation between sigma4-phosphatripyrrane and 2,5-bis[hydroxy(phenyl)methyl]thiophene. The NMR and UV-vis absorption spectra, electrochemical measurements, and DFT calculations revealed that the sigma3-P,N2,S-hybrid porphyrin exhibits high aromaticity as an 18pi-electron system in terms of both geometric and magnetic criteria. [structure: see text]

Phosphorus-containing hybrid calixphyrins: promising mixed-donor ligands for visible and efficient palladium catalysts.

Phosphorus-sulfur-containing hybrid calixphyrins were prepared by the BF3-promoted dehydrative condensation between sigma4-2,5-bis[(pyrrol-2-yl)methyl]phosphole and 2,5-bis[hydroxy(phenyl)methyl]thiophene. X-ray crystallographic analysis of the Pd-P,N2,S-hybrid calixphyrin complex revealed that the Pd center was coordinated by the four heteroatoms to adopt a distorted square planar geometry. The Pd complex, displaying a characteristic reddish purple color in solution, catalyzed the Heck reaction of bromoarenes with n-butyl acrylate with high efficiency at elevated temperatures.

A convenient method for the synthesis of 2,5-difunctionalized phospholes bearing ester groups.

Symmetrically and unsymmetrically 2,5-difunctionalized phospholes bearing ester groups were prepared in a one-pot procedure from the corresponding diynes and dichloro(phenyl)phosphine via titanacyclopentadienes. The observed optical properties of the functionalized phospholes show that the pi-conjugative push-pull interaction between the 2- and 5-substituents plays an important role in controlling the light-emitting efficiency.