RESUMEN
Objectives: Since carbonized clots and tissue (debris) tend to adhere firmly to the tip of the endoscopic submucosal dissection (ESD) knife as the procedure proceeds, manual removing the firm debris is often challenging and time-consuming. Recently, effective ultrasonic cleaning for other medical devices has been reported. The aim of the present study was to clarify whether ultrasonic cleaning is effective in removing the debris on the insulation-tipped diathermic (IT) knife-2. Methods: This study was an ex-vivo experimental randomized study. A total of 40 IT knife-2 knives with debris on their tip surfaces were prepared and randomly assigned to two groups (Group A and Group B). The knives in Group A were cleaned using the conventional scrubbing method for 30 s (conventional cleaning method), while those in Group B were cleaned using a combined method of scrubbing for 20 s and ultrasonic cleaning for 10 s (combined ultrasonic cleaning method). The tip electrode of the knife after cleaning was photographed under a microscope (40x). The 40 images of the knives were evaluated by independent three endoscopists and two clinical engineers using the five-step evaluation criteria ranging from cleaning score 1 (dirty) to 5 (clean). Results: The mean cleaning score of 3.78 (range: 2.33-4.67) in Group B was significantly higher than that of 1.68 (range: 1.00-2.83) in Group A. Conclusions: The combined ultrasonic cleaning method could remove debris adhering to the IT knife-2 more effectively than the conventional cleaning method. Ultrasonic cleaning may be applied for real-world ESD.
RESUMEN
Oxygen therapy is an essential treatment for patients with coronavirus disease 2019, although there is a risk of aerosolization of additional viral droplets occurring during this treatment that poses a danger to healthcare professionals. High-flow oxygen through nasal cannula (HFNC) is a vital treatment bridging low-flow oxygen therapy with tracheal intubation. Although many barrier devices (including devices without negative pressure in the barrier) have been reported in the literature, few barrier devices are suitable for HFNC and aerosol infection control procedures during HFNC have not yet been established. Hence, we built a single cough simulator model to examine the effectiveness of three protective measures (a semi-closed barrier device, a personalized exhaust, and surgical masks) administered in isolation as well as in combination using particle counter measurements and laser sheet visualization. We found that the addition of a personalized exhaust to a semi-closed barrier device reduced aerosol leakage during HFNC without negative pressure. This novel combination may thus reduce aerosol exposure during oxygen therapy, enhance the protection of healthcare workers, and likely reduce nosocomial infection risk.
Asunto(s)
Microbiología del Aire , Contaminación del Aire Interior , COVID-19 , Aerosoles y Gotitas Respiratorias , Tos , Humanos , SARS-CoV-2RESUMEN
DYRK1A phosphorylates proteins involved in neurological disorders in an intermolecular manner. Meanwhile, during the protein folding process of DYRK1A, a transitional folding intermediate catalyzes the intramolecular autophosphorylation required for the "one-off" inceptive activation and stabilization. In our previous study, a small molecule termed FINDY (1) was identified, which inhibits the folding intermediate-catalyzed intramolecular autophosphorylation of DYRK1A but not the folded state-catalyzed intermolecular phosphorylation. However, the structural features of FINDY (1) responsible for this intermediate-selective inhibition remain elusive. In this study, structural derivatives of FINDY (1) were designed and synthesized according to its predicted binding mode in the ATP pocket of DYRK1A. Quantitative structure-activity relationship (QSAR) of the derivatives revealed that the selectivity against the folding intermediate is determined by steric hindrance between the bulky hydrophobic moiety of the derivatives and the entrance to the pocket. In addition, a potent derivative 3 was identified, which inhibited the folding intermediate more strongly than FINDY (1); it was designated as dp-FINDY. Although dp-FINDY (3) did not inhibit the folded state, as well as FINDY (1), it inhibited the intramolecular autophosphorylation of DYRK1A in an in vitro cell-free protein synthesis assay. Furthermore, dp-FINDY (3) destabilized endogenous DYRK1A in HEK293 cells. This study provides structural insights into the folding intermediate-selective inhibition of DYRK1A and expands the chemical options for the design of a kinase inhibitor.
Asunto(s)
Inhibidores de Proteínas Quinasas/farmacología , Proteínas Serina-Treonina Quinasas/antagonistas & inhibidores , Proteínas Tirosina Quinasas/antagonistas & inhibidores , Tiazoles/farmacología , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Relación Dosis-Respuesta a Droga , Células HEK293 , Humanos , Estructura Molecular , Inhibidores de Proteínas Quinasas/química , Proteínas Serina-Treonina Quinasas/metabolismo , Proteínas Tirosina Quinasas/metabolismo , Relación Estructura-Actividad , Tiazoles/química , Quinasas DyrKRESUMEN
We previously developed biobased wrinkled surfaces based on wood mimetic skins in which microscopic wrinkles were fabricated on a chitosan film by immersion in a phenolic acid solution, horseradish peroxidase-catalyzed surface reaction, and drying. Here, we prepared a diverse range of wrinkled films by immersion treatment at 30, 40, 50, and 60 °C in p-coumaric acid and then investigated the correlation between wrinkle morphology and mechanical properties. Wrinkle wavelengths gradually decreased as the immersion temperature increased as well as the previous report. In order to clarify the mechanisms responsible for the different wrinkle morphologies, the films were subjected to elastic moduli measurement and GPC analysis after immersion treatment. These experiments provided evidence that the chitosan around the film surface decomposed along with the immersion process. The decomposition was accelerated by higher immersion temperature, suggesting that higher temperatures led to the formation of softer skins, inducing smaller wrinkles. In fact, wrinkle morphologies with this system were predominately determined by the hardness of the wood mimetic skins. This phenomenon is consistent with the fundamentals of surface wrinkling in nature. This study is the first to demonstrate that artificial wrinkling triggered by water evaporation can be controlled by precise control of the surface hardness of soft material.
Asunto(s)
Materiales Biomiméticos , Desecación , Fenómenos Mecánicos , Estrés Mecánico , Propiedades de Superficie , Temperatura , MaderaRESUMEN
Recent clinical evidence suggests that hylan, a modified hyaluronan, and related products potentially elicit foreign body granulomatous inflammation in human soft tissue. We investigated the biocompatibility of hylan G-F 20 (Synvisc) for up to 28 days after intradermal injection in guinea pigs and intramuscular injection in rabbits. Compared to saline and unmodified hyaluronan, hylan induced definitive macroscopic changes in guinea pigs by day 14 or later and in rabbits by 28 days after injection. Histologically, at the injection sites, there was severe granulomatous inflammation in guinea pigs and acute inflammation with minimal infiltration of macrophages and foreign body giant cells in rabbits. Furthermore, specific antibodies against hylan were demonstrated in guinea pigs by passive cutaneous anaphylaxis, and substantial deposits of IgG on hylan were evident by immunohistochemistry. The present results contradict previous reports on biocompatibility of hylan and suggest that hylan may potentially induce similar unfavorable reactions in humans.