RESUMEN
A hybrid exoskeleton that combines functional electrical stimulation (FES) and a powered exoskeleton is an emerging technology for assisting people with mobility disorders. The cooperative use of FES and the exoskeleton allows active muscle contractions via FES while robustifying torque generation to reduce FES-induced muscle fatigue. In this paper, a switched distribution of allocation ratios between FES and electric motors in a closed-loop adaptive control design is explored for the first time. The new controller uses an iterative learning neural network (NN)-based control law to compensate for structured and unstructured parametric uncertainties in the hybrid exoskeleton model. A discrete Lyapunov-like stability analysis that uses a common energy function proves asymptotic stability for the switched system with iterative learning update laws. Five human participants, including a person with complete spinal cord injury, performed sit-to-stand tasks with the new controller. The experimental results showed that the synthesized controller, in a few iterations, reduced the root mean square error between desired positions and actual positions of the knee and hip joints by 46.20% and 53.34%, respectively. The sit-to-stand experimental results also show that the proposed NN-based iterative learning control (NNILC) approach can recover the asymptotically trajectory tracking performance despite the switching of allocation levels between FES and electric motor. Compared to a proportional-derivative controller and traditional iterative learning control, the findings showed that the new controller can potentially simplify the clinical implementation of the hybrid exoskeleton with minimal parameters tuning.
RESUMEN
Strength and selective motor control are primary determinants of pathological gait in children with cerebral palsy (CP) and other neuromotor disorders. Emerging evidence suggests robotic application of task-specific resistance to functional movements may provide the opportunity to strengthen muscles and improve neuromuscular function during walking in children with CP. Such a strategy could be most beneficial to children who are more severely affected by the pathology but their ability to overcome such resistance and maintain functional ambulation remains unclear. The goal of this study was to design, validate and evaluate initial feasibility and effects of a novel exoskeleton strategy that provides interleaved assistance and resistance to knee extension during overground walking. One participant with CP (GMFCS III) was recruited and completed ten total visits, nine walking with the exoskeleton. Our results validated the controller's ability to parse the gait cycle into five discrete phases (mean accuracy 91%) and provide knee extension assistance during stance and resistance during swing. Following acclimation to the interleaved strategy, peak knee extension was significantly improved in both the left (mean 7.9 deg) and right (15.2 deg) limbs when walking with the exoskeleton. Knee extensor EMG during late swing phase increased to 2.7 (left leg) and 1.7 (right leg) times the activation level during baseline exoskeleton walking without resistance. These results indicate that this interleaved strategy warrants further investigation in a longitudinal intervention study, particularly in individuals who may be more severely affected such that they are unable to ambulate overground using an exoskeleton training strategy that only deploys targeted resistance to limb motion.
RESUMEN
A hybrid exoskeleton comprising a powered exoskeleton and functional electrical stimulation (FES) is a promising technology for restoration of standing and walking functions after a neurological injury. Its shared control remains challenging due to the need to optimally distribute joint torques among FES and the powered exoskeleton while compensating for the FES-induced muscle fatigue and ensuring performance despite highly nonlinear and uncertain skeletal muscle behavior. This study develops a bi-level hierarchical control design for shared control of a powered exoskeleton and FES to overcome these challenges. A higher-level neural network-based iterative learning controller (NNILC) is derived to generate torques needed to drive the hybrid system. Then, a low-level model predictive control (MPC)-based allocation strategy optimally distributes the torque contributions between FES and the exoskeleton's knee motors based on the muscle fatigue and recovery characteristics of a participant's quadriceps muscles. A Lyapunov-like stability analysis proves global asymptotic tracking of state-dependent desired joint trajectories. The experimental results on four non-disabled participants validate the effectiveness of the proposed NNILC-MPC framework. The root mean square error (RMSE) of the knee joint and the hip joint was reduced by 71.96 and 74.57%, respectively, in the fourth iteration compared to the RMSE in the 1st sit-to-stand iteration.
RESUMEN
Currently controllers that dynamically modulate functional electrical stimulation (FES) and a powered exoskeleton at the same time during standing-up movements are largely unavailable. In this paper, an optimal shared control of FES and a powered exoskeleton is designed to perform sitting to standing (STS) movements with a hybrid exoskeleton. A hierarchical control design is proposed to overcome the difficulties associated with developing an optimal real-time solution for the highly nonlinear and uncertain STS control model with multiple degrees of freedom. A higher-level robust nonlinear control design is derived to exponentially track a time-invariant desired STS movement profile. Then, a lower-level optimal control allocator is designed to distribute control between FES and the knee electric motors. The allocator uses a person's muscle fatigue and recovery dynamics to determine an optimal ratio between the FES-elicited knee torque and the exoskeleton assist. Experiments were performed on human participants, two persons without disability and one person with spinal cord injury (SCI), to validate the feedback controller and the optimal torque allocator. The muscles of the participant with SCI did not actively contract to FES, so he was only tested with the powered exoskeleton controller. The experimental results show that the proposed hierarchical control design is a promising method to effect shared control in a hybrid exoskeleton.
RESUMEN
A hybrid walking neuroprosthesis that combines functional electrical stimulation (FES) with a powered lower limb exoskeleton can be used to restore walking in persons with paraplegia. It provides therapeutic benefits of FES and torque reliability of the powered exoskeleton. Moreover, by harnessing metabolic power of muscles via FES, the hybrid combination has a potential to lower power consumption and reduce actuator size in the powered exoskeleton. Its control design, however, must overcome the challenges of actuator redundancy due to the combined use of FES and electric motor. Further, dynamic disturbances such as electromechanical delay (EMD) and muscle fatigue must be considered during the control design process. This ensures stability and control performance despite disparate dynamics of FES and electric motor. In this paper, a general framework to coordinate FES of multiple gait-governing muscles with electric motors is presented. A muscle synergy-inspired control framework is used to derive the controller and is motivated mainly to address the actuator redundancy issue. Dynamic postural synergies between FES of the muscles and the electric motors were artificially generated through optimizations and result in key dynamic postures when activated. These synergies were used in the feedforward path of the control system. A dynamic surface control technique, modified with a delay compensation term, is used as the feedback controller to address model uncertainty, the cascaded muscle activation dynamics, and EMD. To address muscle fatigue, the stimulation levels in the feedforward path were gradually increased based on a model-based fatigue estimate. A Lyapunov-based stability approach was used to derive the controller and guarantee its stability. The synergy-based controller was demonstrated experimentally on an able-bodied subject and person with an incomplete spinal cord injury.