Turning plastics/microplastics into valuable resources? Current and potential research for future applications.

Plastics are a wide range of synthetic or semi-synthetic materials, mainly consisting of polymers. The use of plastics has increased to over 300 million metric tonnes in recent years, and by 2050, it is expected to grow to 800 million. Presently, a mere 10% of plastic waste is recycled, with approximately 75% ended up in landfills. Inappropriate disposal of plastic waste into the environment poses a threat to human lives and marine species. Therefore, this review article highlights potential routes for converting plastic/microplastic waste into valuable resources to promote a greener and more sustainable environment. The literature review revealed that plastics/microplastics (P/MP) could be recycled or upcycled into various products or materials via several innovative processes. For example, P/MP are recycled and utilized as anodes in lithium-ion (Li-ion) and sodium-ion (Na-ion) batteries. The anode in Na-ion batteries comprising PP carbon powder exhibits a high reversible capacity of ∼340 mAh/g at 0.01 A/g current state. In contrast, integrating Fe3O4 and PE into a Li-ion battery yielded an excellent capacity of 1123 mAh/g at 0.5 A/g current state. Additionally, recycled Nylon displayed high physical and mechanical properties necessary for excellent application as 3D printing material. Induction heating is considered a revolutionary pyrolysis technique with improved yield, efficiency, and lower energy utilization. Overall, P/MPs are highlighted as abundant resources for the sustainable production of valuable products and materials such as batteries, nanomaterials, graphene, and membranes for future applications.

Airborne microplastic/nanoplastic research: a comprehensive Web of Science (WoS) data-driven bibliometric analysis.

This paper presents the landscape of research on airborne microplastics and nanoplastics (MPs/NPs) according to the bibliometric analysis of 147 documents issued between 2015 and 2021, extracted from the Web of Science database. The publications on airborne MPs/NPs have increased rapidly from 2015 onwards, which is largely due to the existence of funding support. Science of the Total Environment is one of the prominent journals in publishing related papers. China, England, the USA, and European Countries have produced a significant output of airborne MP/NP research works, which is associated with the availability of funding agencies regionally or nationally. The research hotspot on the topic ranges from the transport of airborne MPs/NPs to their deposition in the terrestrial or aquatic environments, along with the contamination of samples by indoor MPs/NPs. Most of the publications are either research or review papers related to MPs/NPs. It is crucial to share the understanding of global plastic pollution and its unfavorable effects on humankind by promoting awareness of the existence and impact of MPs/NPs. Funding agencies are vital in boosting the research development of airborne MPs/NPs. Some countries that are lacking funding support were able to publish research findings related to the field of interest, however, with lesser research output. Without sufficient fundings, some impactful publications may not be able to carry a substantial impact in sharing the findings and discoveries with the mass public.

Environment impact and bioenergy analysis on the microwave pyrolysis of WAS from food industry: Comparison of CO2 and N2 atmosphere.

The alarming output of waste activated sludge (WAS) from industries requires proper management routes to minimize its impact on the environment during disposal. Pyrolysis is a feasible way of processing and valorizing WAS into higher-value products of alternate use. Despite extensive research into the potential of WAS through pyrolysis, the technology's long-term viability and environmental impact have yet to be fully revealed. In addition, the environmental effects of utilizing different pyrolysis atmosphere (N2 or CO2) has not been studied before, although benefits of CO2 reactivity during pyrolysis have been discovered. This study evaluates the process's environmental impact, carbon footprint, and bioenergy yield when different pyrolysis atmospheres are used. The global warming potential (GWP) for a functional unit of 1 t of dried WAS is 203.81 kg CO2 eq. The heat required during pyrolysis contributes the most (63.7%) towards GWP due to high energy usage, followed by the drying process (23.6%). Transportation contributes the most towards toxicity impact (59.3%) through dust, NOx, NH3 and SO2 emissions. The initial moisture content of raw WAS (65%) greatly impacts overall energy consumption and environmental impact. Pyrolysis in an N2 atmosphere will result in a higher overall bioenergy yield (833 kWh/tonne) and a lower carbon footprint (-1.09 kg CO2/tonne). However, when CO2 was used, the specific energy value within the biochar is higher (22.26 MJ/kg) due to enhanced carbonization. The carbon content of gas derived increased due to higher CO yield. From an energy perspective, the current setup will achieve a net positive bioenergy yield of 561 kW (CO2) and 833 kW (N2), where end products like biochar, bio-oil and gas can be used for power production. Despite the energy-intensive process, microwave pyrolysis has excellent potential to achieve a negative carbon footprint. The biochar used for soil amendment served as a good carbon sink. The utilization of CO2 as carrier gases provides a pathway to utilize anthropogenic CO2, which helps reduce global warming. This work demonstrates microwave pyrolysis as a negative emission, bioenergy-producing approach for WAS disposal and valorization.

Effects of medical staff's turning movement on dispersion of airborne particles under large air supply diffuser during operative surgeries.

The present study examines the effect of medical staff's turning movements on particle concentration in the surgical zone and settlement on the patient under single large diffuser (SLD) ventilation. A computational domain representing the operating room (OR) was constructed using computer-aided design (CAD) software. The airflow and particle models were validated against the published data before conducting the case studies. The airflow in the OR was simulated using an RNG k-ε turbulence model, while the dispersion of the particles was simulated using a discrete phase model based on the Lagrangian approach. A user-defined function (UDF) code was written and compiled in the simulation software to describe the medical staff member's turning movements. In this study, three cases were examined: baseline, SLD 1, and SLD 2, with the air supply areas of 4.3 m2, 5.7 m2, and 15.9 m2, respectively. Results show that SLD ventilations in an OR can reduce the number of dispersed particles in the surgical zone. The particles that settled on the patient were reduced by 41% and 39% when using the SLD 1 and SLD 2 ventilations, respectively. The use of the larger air supply area of SLD 2 ventilation in the present study does not significantly reduce the particles that settle on a patient. Likewise, the use of SLD 2 ventilation may increase operating and maintenance costs.

A bibliometric analysis on the tribological and physicochemical properties of vegetable oil-based bio-lubricants (2010-2021).

Vegetable oil-based bio-lubricants possess potential as an alternative to mineral oil-based lubricants due to their biodegradability and renewability. However, a detailed examination of the publication focus, trend, and future direction related to these bio-lubricants' tribological and physicochemical properties is scarce. Therefore, the study presents a bibliometric analysis of vegetable oil-based bio-lubricant. One hundred sixty-five publications were extracted from Web of Science (WoS) from 2010 to 2021. During this period, the total citation was 2,240, recording an average citation per publication of 13.58. Proceedings of The Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology was the top productive journal, publishing 10.3% of the publications selected on the studied topic. From 2010 to 2021, India was the most productive country working on bio-lubricants due to its abundance of coconut products, followed by Malaysia due to its abundance of palm products. The keyword analysis indicated that a significant amount of work emphasised the derivation of bio-lubricants with an increasing shift towards tribological performance characterisation. From the analysis, palm is the most studied bio-lubricant, followed by castor oil. The reported viscosity and viscosity index values cover an extensive range, allowing these bio-lubricants to be adopted for a wide range of applications. For different vegetable oil-based bio-lubricants, the coefficient of friction is reported from 0.001 to 0.78, with the wear scar diameter being reported from 0.075 µm to 4.59 mm. Even though these bio-lubricants' friction and wear performances can be tabulated, the dataset is still unreliable for lubricant-selection purposes because of the varying test conditions. Such a scenario also limits the ability to correlate the role of fatty acid composition in the vegetable oil-based bio-lubricants in fulfilling their various application-specific potentials. Therefore, this study recommends that a unified correlation between the fatty acid composition and its tribological performance be attained consistently to better elucidate the potential of vegetable oil-based bio-lubricants.

Correlating black soldier fly larvae growths with soluble nutrients derived from thermally pre-treated waste activated sludge.

Black soldier fly larvae (BSFL) have been deployed to valorize various organic wastes. Nonetheless, its growth rate whilst being offered with waste activated sludge (WAS) is not promising, likely by virtue of the presence of extracellular polymeric substances' structure in WAS. In this work, the WAS were first thermally pre-treated under different treatment temperatures and durations before being administered as the feeding substrates for BSFL. The results showed the thermal pre-treatment could improve WAS palatability and subsequently, enhance the growth of BSFL especially after the pre-treatments at 75 °C and above. The highest larva weight gained was recorded at 2.16 mg/larva for the WAS sample being pre-treated at 90 °C and 16 h. Furthermore, the samples pre-treated above 75 °C also achieved higher degradation rates, indicating that the 75 °C was a threshold temperature to effectively hydrolyze the WAS. The changes of WAS characteristics, namely, (i) soluble chemical oxygen demand (SCOD), (ii) soluble carbohydrate, (iii) soluble protein, (iv) humic substances and (v) total soluble protein and humic substances, after the thermal pre-treatments were also studied in correlating with the BSFL growth. Accordingly, a model was successfully developed with the highest R2 value attained at 0.95, evidencing the SCOD was the most suitable WAS characteristic to accurately predict the BSFL growth behavior.