Residential Density Is Associated With BMI Trajectories in Children and Adolescents: Findings From the Moving to Health Study.

Introduction: This study investigates the associations between built environment features and 3-year BMI trajectories in children and adolescents. Methods: This retrospective cohort study utilized electronic health records of individuals aged 5-18 years living in King County, Washington, from 2005 to 2017. Built environment features such as residential density; counts of supermarkets, fast-food restaurants, and parks; and park area were measured using SmartMaps at 1,600-meter buffers. Linear mixed-effects models performed in 2022 tested whether built environment variables at baseline were associated with BMI change within age cohorts (5, 9, and 13 years), adjusting for sex, age, race/ethnicity, Medicaid, BMI, and residential property values (SES measure). Results: At 3-year follow-up, higher residential density was associated with lower BMI increase for girls across all age cohorts and for boys in age cohorts of 5 and 13 years but not for the age cohort of 9 years. Presence of fast food was associated with higher BMI increase for boys in the age cohort of 5 years and for girls in the age cohort of 9 years. There were no significant associations between BMI change and counts of parks, and park area was only significantly associated with BMI change among boys in the age cohort of 5 years. Conclusions: Higher residential density was associated with lower BMI increase in children and adolescents. The effect was small but may accumulate over the life course. Built environment factors have limited independent impact on 3-year BMI trajectories in children and adolescents.

Neighborhood built and food environment in relation to glycemic control in people with type 2 diabetes in the moving to health study.

OBJECTIVE: To examine whether built environment and food metrics are associated with glycemic control in people with type 2 diabetes. RESEARCH DESIGN AND METHODS: We included 14,985 patients with type 2 diabetes using electronic health records from Kaiser Permanente Washington. Patient addresses were geocoded with ArcGIS using King County and Esri reference data. Built environment exposures estimated from geocoded locations included residential unit density, transit threshold residential unit density, park access, and having supermarkets and fast food restaurants within 1600-m Euclidean buffers. Linear mixed effects models compared mean changes of HbA1c from baseline at 1, 3 (primary) and 5 years by each built environment variable. RESULTS: Patients (mean age = 59.4 SD = 13.2, 49.5% female, 16.6% Asian, 9.8% Black, 5.5% Latino/Hispanic, 57.1% White, 20% insulin dependent, mean BMI = 32.7±7.7) had an average of 6 HbA1c measures available. Participants in the 1st tertile of residential density (lowest) had a greater decline in HbA1c (-0.42, -0.43, and -0.44 in years 1, 3, and 5 respectively) than those in the 3rd tertile (HbA1c = -0.37 at 1- and 3-years and -0.36 at 5-years; all p-values <0.05). Having any supermarkets within 1600 m of home was associated with a greater decrease in HbA1c at 1-year and 3-years compared to having none (all p-values <0.05). CONCLUSIONS: Lower residential density and better proximity to supermarkets may benefit HbA1c control in people with people with type 2 diabetes. However, effects were small and indicate limited clinical significance.

Cross-Sectional Study of Location-Based Built Environments, Physical Activity, Dietary Intake, and Body Mass Index in Adult Twins.

We examined relationships between walkability and health behaviors between and within identical twin pairs, considering both home (neighborhood) walkability and each twin's measured activity space. Continuous activity and location data (via accelerometry and GPS) were obtained in 79 pairs over 2 weeks. Walkability was estimated using Walk Score® (WS); home WS refers to neighborhood walkability, and GPS WS refers to the mean of individual WSs matched to every GPS point collected by each participant. GPS WS was assessed within (WHN) and out of the neighborhood (OHN), using 1-mile Euclidean (air1mi) and network (net1mi) buffers. Outcomes included walking and moderate-to-vigorous physical activity (MVPA) bouts, dietary energy density (DED), and BMI. Home WS was associated with WHN GPS WS (b = 0.71, SE = 0.03, p < 0.001 for air1mi; b = 0.79, SE = 0.03, p < 0.001 for net1mi), and OHN GPS WS (b = 0.18, SE = 0.04, p < 0.001 for air1mi; b = 0.22, SE = 0.04, p < 0.001 for net1mi). Quasi-causal relationships (within-twin) were observed for home and GPS WS with walking (ps < 0.01), but not MVPA, DED, or BMI. Results support previous literature that neighborhood walkability has a positive influence on walking.

Deciphering the impact of urban built environment density on respiratory health using a quasi-cohort analysis of 5495 non-smoking lung cancer cases.

INTRODUCTION: Lung cancer is a major health concern and is influenced by air pollution, which can be affected by the density of urban built environment. The spatiotemporal impact of urban density on lung cancer incidence remains unclear, especially at the sub-city level. We aimed to determine cumulative effect of community-level density attributes of the built environment on lung cancer incidence in high-density urban areas. METHODS: We selected 78 communities in the central city of Shanghai, China as the study site; communities included in the analysis had an averaged population density of 313 residents per hectare. Using data from the city cancer surveillance system, an age-period-cohort analysis of lung cancer incidence was performed over a five-year period (2009-2013), with a total of 5495 non-smoking/non-secondhand smoking exposure lung cancer cases. Community-level density measures included the density of road network, facilities, buildings, green spaces, and land use mixture. RESULTS: In multivariate models, built environment density and the exposure time duration had an interactive effect on lung cancer incidence. Lung cancer incidence of birth cohorts was associated with road density and building coverage across communities, with a relative risk of 1·142 (95 % CI: 1·056-1·234, P = 0·001) and 1·090 (95 % CI: 1·053-1·128, P < 0·001) at the baseline year (2009), respectively. The relative risk increased exponentially with the exposure time duration. As for the change in lung cancer incidence over the five-year period, lung cancer incidence of birth cohorts tended to increase faster in communities with a higher road density and building coverage. CONCLUSION: Urban planning policies that improve road network design and building layout could be important strategies to reduce lung cancer incidence in high-density urban areas.

Associations between neighborhood built environment, residential property values, and adult BMI change: The Seattle Obesity Study III.

Objective: To examine associations between neighborhood built environment (BE) variables, residential property values, and longitudinal 1- and 2-year changes in body mass index (BMI). Methods: The Seattle Obesity Study III was a prospective cohort study of adults with geocoded residential addresses, conducted in King, Pierce, and Yakima Counties in Washington State. Measured heights and weights were obtained at baseline (n = 879), year 1 (n = 727), and year 2 (n = 679). Tax parcel residential property values served as proxies for individual socioeconomic status. Residential unit and road intersection density were captured using Euclidean-based SmartMaps at 800 m buffers. Counts of supermarket (0 versus. 1+) and fast-food restaurant availability (0, 1-3, 4+) were measured using network based SmartMaps at 1600 m buffers. Density measures and residential property values were categorized into tertiles. Linear mixed-effects models tested whether baseline BE variables and property values were associated with differential changes in BMI at year 1 or year 2, adjusting for age, gender, race/ethnicity, education, home ownership, and county of residence. These associations were then tested for potential disparities by age group, gender, race/ethnicity, and education. Results: Road intersection density, access to food sources, and residential property values were inversely associated with BMI at baseline. At year 1, participants in the 3rd tertile of density metrics and with 4+ fast-food restaurants nearby showed less BMI gain compared to those in the 1st tertile or with 0 restaurants. At year 2, higher residential property values were predictive of lower BMI gain. There was evidence of differential associations by age group, gender, and education but not race/ethnicity. Conclusion: Inverse associations between BE metrics and residential property values at baseline demonstrated mixed associations with 1- and 2-year BMI change. More work is needed to understand how individual-level sociodemographic factors moderate associations between the BE, property values, and BMI change.

How Does Ride-Hailing Influence Individual Mode Choice? An Examination Using Longitudinal Trip Data from the Seattle Region.

This study investigates the impacts of ride-hailing, which we define as mobility services consisting of both conventional taxis and app-based services offered by transportation network companies, on individual mode choice. We examine whether ride-hailing substitutes for or complements travel by driving, public transit, or walking and biking. The study overcomes some of the limitations of convenience samples or cross-sectional surveys used in past research by employing a longitudinal dataset of individual travel behavior and socio-demographic information. The data include three waves of travel log data collected between 2012 to 2018 in transit-rich areas of the Seattle region. We conducted individual-level panel data modeling, estimating independently pooled models and fixed-effect models of average daily trip count and duration for each mode, while controlling for various factors that affect travel behavior. The results provide evidence of substitution effects of ride-hailing on driving. We found that cross-sectionally, participants who used more ride-hailing tended to drive less, and that longitudinally, an increase in ride-hailing usage was associated with fewer driving trips. No significant associations were found between ride-hailing and public transit usage or walking and biking. Based on detailed travel data of a large population in a major US metropolitan area, the study highlights the value of collecting and analyzing longitudinal data to understand the impacts of new mobility services.

Determining thresholds for spatial urban design and transport features that support walking to create healthy and sustainable cities: findings from the IPEN Adult study.

An essential characteristic of a healthy and sustainable city is a physically active population. Effective policies for healthy and sustainable cities require evidence-informed quantitative targets. We aimed to identify the minimum thresholds for urban design and transport features associated with two physical activity criteria: at least 80% probability of engaging in any walking for transport and WHO's target of at least 15% relative reduction in insufficient physical activity through walking. The International Physical Activity and the Environment Network Adult (known as IPEN) study (N=11 615; 14 cities across ten countries) provided data on local urban design and transport features linked to walking. Associations of these features with the probability of engaging in any walking for transport and sufficient physical activity (≥150 min/week) by walking were estimated, and thresholds associated with the physical activity criteria were determined. Curvilinear associations of population, street intersection, and public transport densities with walking were found. Neighbourhoods exceeding around 5700 people per km2, 100 intersections per km2, and 25 public transport stops per km2 were associated with meeting one or both physical activity criteria. Shorter distances to the nearest park were associated with more physical activity. We use the results to suggest specific target values for each feature as benchmarks for progression towards creating healthy and sustainable cities.

City planning policies to support health and sustainability: an international comparison of policy indicators for 25 cities.

City planning policies influence urban lifestyles, health, and sustainability. We assessed policy frameworks for city planning for 25 cities across 19 lower-middle-income countries, upper-middle-income countries, and high-income countries to identify whether these policies supported the creation of healthy and sustainable cities. We systematically collected policy data for evidence-informed indicators related to integrated city planning, air pollution, destination accessibility, distribution of employment, demand management, design, density, distance to public transport, and transport infrastructure investment. Content analysis identified strengths, limitations, and gaps in policies, allowing us to draw comparisons between cities. We found that despite common policy rhetoric endorsing healthy and sustainable cities, there was a paucity of measurable policy targets in place to achieve these aspirations. Some policies were inconsistent with public health evidence, which sets up barriers to achieving healthy and sustainable urban environments. There is an urgent need to build capacity for health-enhancing city planning policy and governance, particularly in low-income and middle-income countries.

Using open data and open-source software to develop spatial indicators of urban design and transport features for achieving healthy and sustainable cities.

Benchmarking and monitoring of urban design and transport features is crucial to achieving local and international health and sustainability goals. However, most urban indicator frameworks use coarse spatial scales that either only allow between-city comparisons, or require expensive, technical, local spatial analyses for within-city comparisons. This study developed a reusable, open-source urban indicator computational framework using open data to enable consistent local and global comparative analyses. We show this framework by calculating spatial indicators-for 25 diverse cities in 19 countries-of urban design and transport features that support health and sustainability. We link these indicators to cities' policy contexts, and identify populations living above and below critical thresholds for physical activity through walking. Efforts to broaden participation in crowdsourcing data and to calculate globally consistent indicators are essential for planning evidence-informed urban interventions, monitoring policy effects, and learning lessons from peer cities to achieve health, equity, and sustainability goals.

What next? Expanding our view of city planning and global health, and implementing and monitoring evidence-informed policy.

This Series on urban design, transport, and health aimed to facilitate development of a global system of health-related policy and spatial indicators to assess achievements and deficiencies in urban and transport policies and features. This final paper in the Series summarises key findings, considers what to do next, and outlines urgent key actions. Our study of 25 cities in 19 countries found that, despite many well intentioned policies, few cities had measurable standards and policy targets to achieve healthy and sustainable cities. Available standards and targets were often insufficient to promote health and wellbeing, and health-supportive urban design and transport features were often inadequate or inequitably distributed. City planning decisions affect human and planetary health and amplify city vulnerabilities, as the COVID-19 pandemic has highlighted. Hence, we offer an expanded framework of pathways through which city planning affects health, incorporating 11 integrated urban system policies and 11 integrated urban and transport interventions addressing current and emerging issues. Our call to action recommends widespread uptake and further development of our methods and open-source tools to create upstream policy and spatial indicators to benchmark and track progress; unmask spatial inequities; inform interventions and investments; and accelerate transitions to net zero, healthy, and sustainable cities.

Differential associations of the built environment on weight gain by sex and race/ethnicity but not age.

OBJECTIVE: To explore the built environment (BE) and weight change relationship by age, sex, and racial/ethnic subgroups in adults. METHODS: Weight trajectories were estimated using electronic health records for 115,260 insured Kaiser Permanente Washington members age 18-64 years. Member home addresses were geocoded using ArcGIS. Population, residential, and road intersection densities and counts of area supermarkets and fast food restaurants were measured with SmartMaps (800 and 5000-meter buffers) and categorized into tertiles. Linear mixed-effect models tested whether associations between BE features and weight gain at 1, 3, and 5 years differed by age, sex, and race/ethnicity, adjusting for demographics, baseline weight, and residential property values. RESULTS: Denser urban form and greater availability of supermarkets and fast food restaurants were associated with differential weight change across sex and race/ethnicity. At 5 years, the mean difference in weight change comparing the 3rd versus 1st tertile of residential density was significantly different between males (-0.49 kg, 95% CI: -0.68, -0.30) and females (-0.17 kg, 95% CI: -0.33, -0.01) (P-value for interaction = 0.011). Across race/ethnicity, the mean difference in weight change at 5 years for residential density was significantly different among non-Hispanic (NH) Whites (-0.47 kg, 95% CI: -0.61, -0.32), NH Blacks (-0.86 kg, 95% CI: -1.37, -0.36), Hispanics (0.10 kg, 95% CI: -0.46, 0.65), and NH Asians (0.44 kg, 95% CI: 0.10, 0.78) (P-value for interaction <0.001). These findings were consistent for other BE measures. CONCLUSION: The relationship between the built environment and weight change differs across demographic groups. Careful consideration of demographic differences in associations of BE and weight trajectories is warranted for investigating etiological mechanisms and guiding intervention development.

What county-level factors influence COVID-19 incidence in the United States? Findings from the first wave of the pandemic.

Effective control of the COVID-19 pandemic via appropriate management of the built environment is an urgent issue. This study develops a research framework to explore the relationship between COVID-19 incidence and influential factors related to protection of vulnerable populations, intervention in transmission pathways, and provision of healthcare resources. Relevant data for regression analysis and structural equation modeling is collected during the first wave of the pandemic in the United States, from counties with over 100 confirmed cases. In addition to confirming certain factors found in the existing literature, we uncover six new factors significantly associated with COVID-19 incidence. Furthermore, incidence during the lockdown is found to significantly affect incidence after the reopening, highlighting that timely quarantining and treating of patients is essential to avoid the snowballing transmission over time. These findings suggest ways to mitigate the negative effects of subsequent waves of the pandemic, such as special attention of infection prevention in neighborhoods with unsanitary and overcrowded housing, minimization of social activities organized by neighborhood associations, and contactless home delivery service of healthy food. Also worth noting is the need to provide support to people less capable of complying with the stay-at-home order because of their occupations or socio-economic disadvantage.

Measurement of neighborhood-based physical activity bouts.

This study examined how buffer type (shape), size, and the allocation of activity bouts inside buffers that delineate the neighborhood spatially produce different estimates of neighborhood-based physical activity. A sample of 375 adults wore a global positioning system (GPS) data logger and accelerometer over 2 weeks under free-living conditions. Analytically, the amount of neighborhood physical activity measured objectively varies substantially, not only due to buffer shape and size, but by how GPS-based activity bouts are identified with respect to containment within neighborhood buffers. To move the "neighborhood-effects" literature forward, it is critical to delineate the spatial extent of the neighborhood, given how different ways of measuring GPS-based activity containment will result in different levels of physical activity across different buffer types and sizes.

Does the built environment have independent obesogenic power? Urban form and trajectories of weight gain.

OBJECTIVE: To determine whether selected features of the built environment can predict weight gain in a large longitudinal cohort of adults. METHODS: Weight trajectories over a 5-year period were obtained from electronic health records for 115,260 insured patients aged 18-64 years in the Kaiser Permanente Washington health care system. Home addresses were geocoded using ArcGIS. Built environment variables were population, residential unit, and road intersection densities captured using Euclidean-based SmartMaps at 800-m buffers. Counts of area supermarkets and fast food restaurants were obtained using network-based SmartMaps at 1600, and 5000-m buffers. Property values were a measure of socioeconomic status. Linear mixed effects models tested whether built environment variables at baseline were associated with long-term weight gain, adjusting for sex, age, race/ethnicity, Medicaid insurance, body weight, and residential property values. RESULTS: Built environment variables at baseline were associated with differences in baseline obesity prevalence and body mass index but had limited impact on weight trajectories. Mean weight gain for the full cohort was 0.06 kg at 1 year (95% CI: 0.03, 0.10); 0.64 kg at 3 years (95% CI: 0.59, 0.68), and 0.95 kg at 5 years (95% CI: 0.90, 1.00). In adjusted regression models, the top tertile of density metrics and frequency counts were associated with lower weight gain at 5-years follow-up compared to the bottom tertiles, though the mean differences in weight change for each follow-up year (1, 3, and 5) did not exceed 0.5 kg. CONCLUSIONS: Built environment variables that were associated with higher obesity prevalence at baseline had limited independent obesogenic power with respect to weight gain over time. Residential unit density had the strongest negative association with weight gain. Future work on the influence of built environment variables on health should also examine social context, including residential segregation and residential mobility.

Small increments in diet cost can improve compliance with the Dietary Guidelines for Americans.

Adherence to the Dietary Guidelines for Americans (DGA) may involve higher diet costs. This study assessed the relation between two measures of food spending and diet quality among adult participants (N = 768) in the Seattle Obesity Study (SOS III). All participants completed socio-demographic and food expenditure surveys and the Fred Hutch food frequency questionnaire. Dietary intakes were joined with local supermarket prices to estimate individual-level diet costs. Healthy Eating Index (HEI- 2015) scores measured compliance with DGA. Multiple linear regressions using Generalized Estimating Equations with robust standard errors showed that lower food spending was associated with younger age, Hispanic ethnicity, and lower socioeconomic status. Even though higher HEI-2015 scores were associated with higher diet costs per 2000 kcal, much individual variability was observed. A positive curvilinear relationship was observed in adjusted models. At lower cost diets, a $100/month increase in cost (from $150 to $250) was associated with a 20.6% increase in HEI-2015. For higher levels of diet cost (from $350 to $450) there were diminishing returns (2.8% increase in HEI- 2015). These findings indicate that increases in food spending at the lower end of the range have the most potential to improve diet quality.

Residential neighborhood features associated with objectively measured walking near home: Revisiting walkability using the Automatic Context Measurement Tool (ACMT).

Many distinct characteristics of the social, natural, and built neighborhood environment have been included in walkability measures, and it is unclear which measures best describe the features of a place that support walking. We developed the Automatic Context Measurement Tool, which measures neighborhood environment characteristics from public data for any point location in the United States. We explored these characteristics in home neighborhood environments in relation to walking identified from integrated GPS, accelerometer, and travel log data from 681 residents of King Country, WA. Of 146 neighborhood characteristics, 92 (63%) were associated with walking bout counts after adjustment for individual characteristics and correction for false discovery. The strongest built environment predictor of walking bout count was housing unit count. Models using data-driven and a priori defined walkability measures exhibited similar fit statistics. Walkability measures consisting of different neighborhood characteristic measurements may capture the same underlying variation in neighborhood conditions.

Impact of Built Environments on Body Weight (the Moving to Health Study): Protocol for a Retrospective Longitudinal Observational Study.

BACKGROUND: Studies assessing the impact of built environments on body weight are often limited by modest power to detect residential effects that are small for individuals but may nonetheless comprise large attributable risks. OBJECTIVE: We used data extracted from electronic health records to construct a large retrospective cohort of patients. This cohort will be used to explore both the impact of moving between environments and the long-term impact of changing neighborhood environments. METHODS: We identified members with at least 12 months of Kaiser Permanente Washington (KPWA) membership and at least one weight measurement in their records during a period between January 2005 and April 2017 in which they lived in King County, Washington. Information on member demographics, address history, diagnoses, and clinical visits data (including weight) was extracted. This paper describes the characteristics of the adult (aged 18-89 years) cohort constructed from these data. RESULTS: We identified 229,755 adults representing nearly 1.2 million person-years of follow-up. The mean age at baseline was 45 years, and 58.0% (133,326/229,755) were female. Nearly one-fourth of people (55,150/229,755) moved within King County at least once during the follow-up, representing 84,698 total moves. Members tended to move to new neighborhoods matching their origin neighborhoods on residential density and property values. CONCLUSIONS: Data were available in the KPWA database to construct a very large cohort based in King County, Washington. Future analyses will directly examine associations between neighborhood conditions and longitudinal changes in body weight and diabetes as well as other health conditions. INTERNATIONAL REGISTERED REPORT IDENTIFIER (IRRID): DERR1-10.2196/16787.

Intersections and Non-Intersections: A Protocol for Identifying Pedestrian Crash Risk Locations in GIS.

Intersection and non-intersection locations are commonly used as spatial units of analysis for modeling pedestrian crashes. While both location types have been previously studied, comparing results is difficult given the different data and methods used to identify crash-risk locations. In this study, a systematic and replicable protocol was developed in GIS (Geographic Information System) to create a consistent spatial unit of analysis for use in pedestrian crash modelling. Four publicly accessible datasets were used to identify unique intersection and non-intersection locations: Roadway intersection points, roadway lanes, legal speed limits, and pedestrian crash records. Two algorithms were developed and tested using five search radii (ranging from 20 to 100 m) to assess the protocol reliability. The algorithms, which were designed to identify crash-risk locations at intersection and non-intersection areas detected 87.2% of the pedestrian crash locations (r: 20 m). Agreement rates between algorithm results and the crash data were 94.1% for intersection and 98.0% for non-intersection locations, respectively. The buffer size of 20 m generally showed the highest performance in the analyses. The present protocol offered an efficient and reliable method to create spatial analysis units for pedestrian crash modeling. It provided researchers a cost-effective method to identify unique intersection and non-intersection locations. Additional search radii should be tested in future studies to refine the capture of crash-risk locations.