Effect of solution chemistry on the sedimentation, dissolution, and aggregation of the bimetallic Fe/Cu nanoparticles pre- and post-grafted with carboxymethyl cellulose.

The suitability of iron-based nanomaterials or composites for in-situ remediation hinges on their physicochemical stability. Introducing surface modifications like metal doping or polymer grafting can regulate interparticle forces, influencing particle stability. Thus, probing how grafting methods (i.e., pre- or post-grafting) tune material properties controlling interparticle forces, comprehend the synergistic effect of metal doping and polymer grafting, and evaluate stability under varying geochemical conditions are the way forward in designing sustainable remediation strategies. To this end, time-dependent sedimentation, dissolution, and aggregation of four synthesized iron-based nanoparticles (bare iron (Fe), copper doped bimetallic iron/copper (Fe/Cu), pre- and post-grafted Fe/Cu with carboxymethyl cellulose (CMC) - CMCpre-Fe/Cu and CMCpost-Fe/Cu, respectively) were carried out as a function of solution chemistry (i.e., pH - 5 to 10, ionic strength, IS - 0 to 100 mM NaCl, initial particle concentration, C0-20 to 200 mg.L-1) mimicking geoenvironmental conditions. CMCpre-Fe/Cu exhibited markedly higher particle availability (> 91 %) against sedimentation than others (bare Fe/Cu (11.28 %) > bare Fe (7.33 %) > CMCpost-Fe/Cu (6.09 %)) - suggesting the pivotal role of grafting method on particle stability. XDLVO energy profiles revealed pre-grafting altered magnetic properties favoring surface charge-driven electrostatic repulsion over magnetic attraction, thereby limiting aggregation-induced particle settling. In contrast, superior magnetic force overrides the electrostatic behavior for bare and post-grafted particles. Unlike bare and post-grafted nanoparticles, CMCpre-Fe/Cu aggregate size correlated positively with [H+] and IS, consistent with their settling behavior. Rise in C0 showed a visible negative effect on particle aggregation and, thereby, sedimentation except for CMCpre-Fe/Cu by facilitating particle collision through Brownian movement. Both acidic pH and copper doping promoted nanoparticle dissolution, whereas pre-grafting can provide a plausible solution against nanoparticle toxicity and loss of reactivity due to ionic release. To recapitulate, these findings are imperative in building a sustainable framework for environmental remediation application.

Facile Fabrication of Monodispersed Carbon Sphere: A Pathway Toward Energy-Efficient Direct Air Capture (DAC) Using Amino Acids.

Direct removal of carbon dioxide (CO2 ) from the atmosphere, known as direct air capture (DAC) is attracting worldwide attention as a negative emission technology to control atmospheric CO2 concentrations. However, the energy-intensive nature of CO2 absorption-desorption processes has restricted deployment of DAC operations. Catalytic solvent regeneration is an effective solution to tackle this issue by accelerating CO2 desorption at lower regeneration temperatures. This work reports a one-step synthesis methodology to prepare monodispersed carbon nanospheres (MCSs) using trisodium citrate as a structure-directing agent with acidic sites. The assembly of citrate groups on the surface of MCSs enables consistent spherical growth morphology, reduces agglomeration and enhances water dispersibility. The functionalization-assisted synthesis produces uniform, hydrophilic nanospheres of 100-600 nm range. This work also demonstrates that the prepared MCSs can be further functionalized with strong Brønsted acid sites, providing high proton donation ability. Furthermore, the materials can be effectively used in a wide range of amino acid solutions to substantially accelerate CO2 desorption (25.6% for potassium glycinate and 41.1% for potassium lysinate) in the DAC process. Considering the facile synthesis of acidic MCSs and their superior catalytic efficiency, these findings are expected to pave a new path for energy-efficient DAC.

Engineered assembly of water-dispersible nanocatalysts enables low-cost and green CO2 capture.

Catalytic solvent regeneration has attracted broad interest owing to its potential to reduce energy consumption in CO2 separation, enabling industry to achieve emission reduction targets of the Paris Climate Accord. Despite recent advances, the development of engineered acidic nanocatalysts with unique characteristics remains a challenge. Herein, we establish a strategy to tailor the physicochemical properties of metal-organic frameworks (MOFs) for the synthesis of water-dispersible core-shell nanocatalysts with ease of use. We demonstrate that functionalized nanoclusters (Fe3O4-COOH) effectively induce missing-linker deficiencies and fabricate mesoporosity during the self-assembly of MOFs. Superacid sites are created by introducing chelating sulfates on the uncoordinated metal clusters, providing high proton donation capability. The obtained nanomaterials drastically reduce the energy consumption of CO2 capture by 44.7% using only 0.1 wt.% nanocatalyst, which is a ∽10-fold improvement in efficiency compared to heterogeneous catalysts. This research represents a new avenue for the next generation of advanced nanomaterials in catalytic solvent regeneration.

Next-generation enhanced-efficiency fertilizers for sustained food security.

Nitrogen losses in agricultural systems can be reduced through enhanced-efficiency fertilizers (EEFs), which control the physicochemical release from fertilizers and biological nitrogen transformations in soils. The adoption of EEFs by farmers requires evidence of consistent performance across soils, crops and climates, paired with information on the economic advantages. Here we show that the benefits of EEFs due to avoided social costs of nitrogen pollution considerably outweigh their costs-and must be incorporated in fertilizer policies. We outline new approaches to the design of EEFs using enzyme inhibitors with modifiable chemical structures and engineered, biodegradable coatings that respond to plant rhizosphere signalling molecules.

Modification of naturally abundant resources for remediation of potentially toxic elements: A review.

Water and soil contamination due to potentially toxic elements (PTEs) represents a critical threat to the global ecosystem and human health. Naturally abundant resources have significant advantages as adsorbent materials for environmental remediation over manufactured materials such as nanostructured materials and activated carbons. These advantages include cost-effectiveness, eco-friendliness, sustainability, and nontoxicity. In this review, we firstly compare the characteristics of representative adsorbent materials including bentonite, zeolite, biochar, biomass, and effective modification methods that are frequently used to enhance their adsorption capacity and kinetics. Following this, the adsorption pathways and sites are outlined at an atomic level, and an in-depth understanding of the structure-property relationships are provided based on surface functional groups. Finally, the challenges and perspectives of some emerging naturally abundant resources such as lignite are examined. Although both unamended and modified naturally abundant resources face challenges associated with their adsorption performance, cost performance, energy consumption, and secondary pollution, these can be tackled by using advanced techniques such as tailored modification, formulated mixing and reorganization of these materials. Recent studies on adsorbent materials provide a strong foundation for the remediation of PTEs in soil and water. We speculate that the pursuit of effective modification strategies will generate remediation processes of PTEs better suited to a wider variety of practical application conditions.

Water-Dispersible Nanocatalysts with Engineered Structures: The New Generation of Nanomaterials for Energy-Efficient CO2 Capture.

The high energy demand of CO2 absorption-desorption technologies has significantly inhibited their industrial utilization and implementation of the Paris Climate Accord. Catalytic solvent regeneration is of considerable interest due to its low operating temperature and high energy efficiency. Of the catalysts available, heterogeneous catalysts have exhibited relatively poor performances and are hindered by other challenges, which have slowed their large-scale deployment. Herein, we report a facile and eco-friendly approach for synthesizing water-dispersible Fe3O4 nanocatalysts coated with a wide range of amino acids (12 representative molecules) in aqueous media. The acidic properties of water-dispersible nanocatalysts can be easily tuned by introducing different functional groups during the hydrothermal synthesis procedure. We demonstrate that the prepared nanocatalysts can be used in energy-efficient CO2 capture plants with ease-of-use, at very low concentrations (0.1 wt %) and with extra-high efficiencies (up to ∼75% energy reductions). They can be applied in a range of solutions, including amino acids (i.e., short-chain, long-chain, and cyclic) and amines (i.e., primary, tertiary, and primary-tertiary mixture). Considering the superiority of the presented water-dispersible nanocatalysts, this technology is expected to provide a new pathway for the development of energy-efficient CO2 capture technologies.

The electro-Fenton regeneration of Granular Activated Carbons: Degradation of organic contaminants and the relationship to the carbon surface.

Electrochemical regeneration of Granular Activated Carbon is an emerging treatment option to restore adsorption capacity in systems designed to remove organic contaminants from aqueous solutions. The electro-Fenton process is one such electrochemical process and it is reviewed along with other members of its family including Photoelectro-Fenton and Heterogeneous electro-Fenton and electro-Fenton like reactions, for its ability to regenerate Granular Activated Carbons contaminated with organics. The behaviour of critical operating parameter such as pH, current, catalyst concentration and initial contaminant concentration are reviewed to find optimal operating conditions. The relationship between electro-Fenton regeneration and the chemical and physical surface of the carbon is also explored. Understanding regeneration mechanisms and the optimal operating conditions enables these technologies to be used commercially and to be scaled-up and treat contaminated waters more efficiently.

Porous media transport of iron nanoparticles for site remediation application: A review of lab scale column study, transport modelling and field-scale application.

Injection of surface modified zero valent iron nanoparticles for in situ remediation of soil, contaminated with an array of pollutants has attracted great attention due to the high reactivity of zero valent iron towards a broad range of contaminants, its cost effectiveness, minimal physical disruption and low toxicity. The effectiveness of this technology relies on the stability and mobility of injected iron nanoparticles. Hence the development of a modelling tool capable of predicting nZVI transport is indispensable. This review provides state of the art knowledge on the mobility of iron nanoparticles in porous media, mechanisms involved in subsurface retention of nZVI based on continuum models and field scale application. Special attention is given to the identification of the influential parameters controlling the transport potential of iron nanoparticles and the available numerical models for the simulation of laboratory scale transport data.

Assessment of the electro-Fenton pathway for the removal of naphthalene from contaminated waters in remote regions.

This work investigates the effectiveness of the electro-Fenton reaction for the treatment of wastewaters contaminated with petroleum hydrocarbons. More specific attention was given to field deployment applications in remote regions, such as the sub-Antarctic, where there is a need for low-cost technologies that can aid in remediation efforts. Naphthalene, a high priority pollutant for removal within these regions, was chosen as a model contaminant and treated with inexpensive graphite electrodes to promote the electro-Fenton pathway. Results show that naphthalene can be fully removed from a near-saturated solution, 20 mg/L, in less than 3 h of treatment. The underlying removal mechanisms were identified, and a kinetic model is presented that can accurately predict treatment outcomes at varying operating conditions of applied electric currents, 0-5 mA, and iron(II) concentrations, 0-2.0 mM. Optimal operating conditions for the electro-Fenton pathway were found to be at an applied current of 5 mA and an iron(II) concentration of 0.06 mM; this resulted in a specific energy consumption of 5.6 kWhr/kg of naphthalene removed, low enough to be operated in remote regions via sustainable energy sources.

Effect of Leifsonia sp. on retardation of uranium in natural soil and its potential mechanisms.

Uranium mining and milling activities for many years resulted in release of uranium into the adjoining soil in varying degrees. Bioremediation approaches (i.e., immobilization via the action of bacteria) resulting in uranium bearing solid is supposed as an economic and clean in-situ approach for the treatment of uranium contaminated sites. This study purposes to determine the immobilization efficiency of uranium in soil by Leifsonia sp. The results demonstrated that cells have a good proliferation ability under the stress of uranium and play a role in retaining uranium in soil. Residual uranium in active Leifsonia-medium group (66%) was higher than that in the controls, which was 31% in the deionised water control, 46% in the Leifsonia group, and 47% in the medium group, respectively. This indicated that Leifsonia sp. facilitates the immobilization efficiency of uranium in soil by converting part of the reducible and oxidizable fraction of uranium into the residual fraction. X-ray photoelectron fitting results showed that tetravalent states uranium existed in the soil samples, which indicated that the hexavalent uranium was converted into tetravalent by cells. This is the first report of effect of Leifsonia sp. on uranium immobilization in soil. The findings implied that Leifsonia sp. could, to some extent, prevent the migration and diffusion of uranium in soil by changing the chemical states into less toxicity and less risky forms.

Electrochemical removal of naphthalene from contaminated waters using carbon electrodes, and viability for environmental deployment.

This work assesses the potential of electrochemical technologies for the treatment of groundwaters contaminated with petroleum hydrocarbons. Specific consideration was given to deployment in Antarctic regions where numerous fuel spills have occurred over the last two centuries, and resources and manual labour for remediation efforts are limited. The polycyclic aromatic hydrocarbon, naphthalene, was a used as a model contaminant and was treated with low-cost, active carbon electrodes to promote the active chlorine degradation pathway. Results showed that 20 mg/L naphthalene solutions could be treated to sufficient standards in less than 3 h of treatment, and that the formation of toxic and chlorinated by-products is not an issue of concern if the appropriate timeframes are used (4 h of treatment). The effects of the applied current (0-160 mA) and electrolyte concentration (0.01-0.1 M NaCl) were evaluated and a dynamic kinetic model proposed and found to be in good agreement with the experimental results. The energy consumption is an important limitation in remote environmental regions where resources are scarce. It was found that an energy usage of 104 kW h/kg of naphthalene removed could be achieved.

Data in brief on CO2 absorption-desorption of aqueous-based amino acid solvents with phase change behaviour.

The data presented in this paper are related to the published research article "Development of aqueous-based phase change amino acid solvents for energy-efficient CO2 capture: The role of antisolvent" [1]. The raw and analyzed data include the equilibrium and kinetics of CO2 absorption, the density and concentration of different CO2-containing species at upper and lower liquid phases, and particle size distribution of solid particles precipitated during CO2 absorption of aqueous and aqueous-based amino acid solvents. In addition, the SEM images of solid precipitates at the end of CO2 absorption are presented. The detailed values of this phase change amino acid solvent are crucial for large-scale implementation of CO2 capture systems with phase change behavior.

Uranium adsorption and subsequent re-oxidation under aerobic conditions by Leifsonia sp. - Coated biochar as green trapping agent.

It has generally been assumed that the immobilization of U(VI) via polyphosphate accumulating microorganisms may present a sink for uranium, but the potential mechanisms of the process and the stability of precipitated uranium under aerobic conditions remain elusive. This study seeks to explore the mechanism, capacity, and stability of uranium precipitation under aerobic conditions by a purified indigenous bacteria isolated from acidic tailings (pH 6.5) in China. The results show that over the treatment ranges investigated, maximum removal of U(VI) from aqueous solution was 99.82% when the initial concentration of U(VI) was 42 µM, pH was 3.5, and the temperature was with 30 °C much higher than that of other reported microorganisms. The adsorption mechanism was elucidated via the use of SEM-EDS, XPS and FTIR. SEM-EDS showed two peaks of uranium on the surface. A plausible explanation for this, supported by FTIR, is that uranium precipitated on the biosorbent surfaces. XPS measurements indicated that the uranium product is most likely a mixture of 13% U(VI) and 87% U(IV). Notably, the reoxidation experiment found that the uranium precipitates were stable in the presence of Ca2+ and Mg2+, however, U(IV) is oxidized to U(VI) in the presence of NO3- and Na+ ions, resulting in rapid dissolution. It implies that the synthesized Leifsonia sp. coated biochar could be utilized as a green and effective biosorbent. However, it may not a good choice for in-situ remediation due to the subsequent re-oxidation under aerobic conditions. These observations can be of some guiding significance to the application of the bioremediation technology in surface environments.

The electrochemical regeneration of granular activated carbons: A review.

The electrochemical treatment of exhausted granular activated carbon (GAC) has been identified as an effective alternative to traditional adsorbent regeneration methods (e.g. thermal, chemical, and microbial). However, despite its proven potential and initial investigation over two decades ago, the development of this technology has been progressing slowly, hindering its deployment in industrial applications. Thus, a review has been conducted that aims to present the fundamentals of GAC electrochemical regenerative methods, what research has been conducted to develop the technology to the present day, and lastly, identify limitations and future prospects associated with electrochemical methods. The regenerative mechanism is firstly discussed, followed by a presentation of the varying reactor configurations and operating parameters utilized during the electrochemical treatment of GAC materials exhausted with a broad range of wastewater contaminants. Finally, emerging electrochemical technologies used for the commercial treatment of exhausted adsorbent materials and contaminated soils are discussed.

Liquid marble formation and solvent vapor treatment of the biodegradable polymers polylactic acid and polycaprolactone.

Liquid Marbles were produced by rolling aqueous droplets on a powder bed of biodegradable polymers, namely polylactic acid (PLA), polycaprolactone (PCL) and blends of these. Solvent vapor treatment was subsequently applied with dichloromethane (DCM). This treatment aligned the polymer chains in order to form a smooth polymeric shell with enhanced mechanical and barrier properties. Whilst a wide range of potential applications for Liquid Marbles exists, the aim here is to encapsulate a solution containing a fertilizer, i.e. urea to produce a controlled release fertilizer. The influences of droplet volume, polymer particle size and solvent vapor treatment time on the liquid marble properties were investigated. Crystallinity and thermal properties were analyzed by differential scanning calorimetry (DSC), surface characteristics and shell thickness by scanning electron microscopy (SEM), mechanical strength and elasticity by compression tests and evaporation rates by thermogravimetric analysis (TGA).

From urban municipalities to polar bioremediation: the characterisation and contribution of biogenic minerals for water treatment.

Minerals of biological origin have shown significant potential for the separation of contaminants from water worldwide. This study details the contribution of biologically derived minerals to water treatment operations, with a focus on filtration media from urban municipalities and remote cold regions. The results support biofilm-embedded iron and manganese to be the building blocks of biogenic mineral development on activated carbon and nutrient-amended zeolites. The presence of similar iron and manganese oxidising bacterial species across all filter media supports the analogous morphologies of biogenic minerals between sites and suggests that biological water treatment processes may be feasible across a range of climates. This is the first time the stages of biogenic mineral formation have been aligned with comprehensive imaging of the biofilm community and bacterial identification; especially with respect to cold regions. Where biogenic mineral formation occurs on filter media, the potential exists for enhanced adsorption for a range of organic and inorganic contaminants and improved longevity of filter media beyond the adsorption or exchange capacities of the raw material.

Permeable bio-reactive barriers to address petroleum hydrocarbon contamination at subantarctic Macquarie Island.

A reliance on diesel generated power and a history of imperfect fuel management have created a legacy of petroleum hydrocarbon contamination at subantarctic Macquarie Island. Increasing environmental awareness and advances in contaminant characterisation and remediation technology have fostered an impetus to reduce the environmental risk associated with legacy sites. A funnel and gate permeable bio-reactive barrier (PRB) was installed in 2014 to address the migration of Special Antarctic Blend diesel from a spill that occurred in 2002, as well as older spills and residual contaminants in the soil at the Main Power House. The PRB gate comprised of granular activated carbon and natural clinoptilolite zeolite. Petroleum hydrocarbons migrating in the soil water were successfully captured on the reactive materials, with concentrations at the outflow of the barrier recorded as being below reporting limits. The nutrient and iron concentrations delivered to the barrier demonstrated high temporal variability with significant iron precipitation observed across the bed. The surface of the granular activated carbon was largely free from cell attachment while natural zeolite demonstrated patchy biofilm formation after 15 months following PRB installation. This study illustrates the importance of informed material selection at field scale to ensure that adsorption and biodegradation processes are utilised to manage the environmental risk associated with petroleum hydrocarbon spills. This study reports the first installation of a permeable bio-reactive barrier in the subantarctic.

The performance of ammonium exchanged zeolite for the biodegradation of petroleum hydrocarbons migrating in soil water.

Nitrogen deficiency has been identified as the main inhibiting factor for biodegradation of petroleum hydrocarbons in low nutrient environments. This study examines the performance of ammonium exchanged zeolite to enhance biodegradation of petroleum hydrocarbons migrating in soil water within laboratory scale flow cells. Biofilm formation and biodegradation were accelerated by the exchange of cations in soil water with ammonium in the pores of the exchanged zeolite when compared with natural zeolite flow cells. These results have implications for sequenced permeable reactive barrier design and the longevity of media performance within such barriers at petroleum hydrocarbon contaminated sites deficient in essential soil nutrients.

A permeable reactive barrier (PRB) media sequence for the remediation of heavy metal and hydrocarbon contaminated water: A field assessment at Casey Station, Antarctica.

A field trial was conducted at Casey Station, Antarctica to assess the suitability of a permeable reactive barrier (PRB) media sequence for the remediation of sites containing both hydrocarbon and heavy metal contamination. An existing PRB was modified to assess a sequence consisting of three sections: (i) Nutrient release/hydrocarbon sorption using ZeoPro™ and granular activated carbon; (ii) Phosphorus and heavy metal capture by granular iron and sand; (iii) Nutrient and excess iron capture by zeolite. The media sequence achieved a greater phosphorus removal capacity than previous Antarctic PRB configurations installed on site. Phosphorus concentrations were reduced during flow through the iron/sand section and iron concentrations were reduced within the zeolite section. However, non-ideal flow was detected during a tracer test and supported by analysis of media and liquid samples from the second summer of operation. Results indicate that the PRB media sequence trialled might be appropriate for other locations, especially less environmentally challenging contaminated sites.