Real-time multispectral transmission of hard tooth tissues and dental composites with their heating.

The objective of the study was to investigate the real-time transmission of Violet, Blue, Red and Near Infra-Red (NIR) irradiation through 2 or 4 mm thick dental composites and tooth tissue samples at varying positions of Light Curing Unit (LCU) with polymerization temperature monitoring. METHODS: The composites tested were: Filtek Universal Restorative (FUR), Filtek One Bulk Fill (FBF), Tetric EvoCeram (TEC), Tetric Bulk Fill (TBF) and Tetric PowerFill (TPF). The new LCU Pinkwave (a four-wavelength source manufactured by Vista Apex, USA) was placed either centrally or eccentrically for 3 mm above the sample. A Fiber spectrometer detected irradiation and Infrared Thermal camera polymerization temperatures. RESULTS: All eccentric LCU positions significantly weaken transmitted spectra for all composites in both thickness, jeopardizing Blue light. The LCU position did not affect transmitted irradiation for tooth tissues. The reduction in wavelength intensity when penetrating through thicker compared to thinner composite samples was 62%, 50% and 31% for Blue, NIR and Red, respectively, and 90%, 50% and 35% for tooth tissue samples, respectively. The temperature of bulk fill composites with additional photoinitiators rises faster. Eccentric LCU positions cause a significant decrease in both speed and the maximal value of temperature rise. Red and NIR irradiations contribute to the polymerization temperature. SIGNIFICANCE: Tested LCU source cause considerable inhomogeneity in the emitted and transmitted spectra. Tooth tissues homogenize irradiation, but drastically attenuates it. Red light has better potential than Blue light concerning penetration and could be further investigated as the wavelength for activation of an adjusted photoinitiator.

Characterization and Optimization of Real-Time Photoresponsive Gelatin for Direct Laser Writing.

There is an abundance of plastic materials used in the widest range of applications, such as packaging, machine parts, biomedical devices and components, etc. However, most materials used today are non-decomposable in the environment, producing a huge burden on ecosystems. The search for better, safer alternatives is still on. Here we present a detailed analysis of a simple, cheap, non-toxic, even edible, eco-friendly material, which can be easily manufactured, laser patterned and used for the fabrication of complex structures. The base substance is gelatin which is made photoresponsive by adding plasticizers and sensitizers. The resulting films were analyzed with respect to their optical, thermal and mechanical properties, which can be modified by a slight variation of chemical composition. The material is optimized for rapid laser-manufacturing of elastic microstructures (lenses, gratings, cantilevers, etc.) without any waste or residues. Overall, the material properties were tailored to increase photothermal responsivity, improve the surface quality and achieve material homogeneity, transparency and long-term stability (as verified using electron microscopy, infrared spectroscopy and differential scanning calorimetry).

Modulated photoactivation of composite restoration: measurement of cuspal movement using holographic interferometry.

The purpose of this research was to investigate the influence of modulated photoactivation on cuspal movement. Eight class II MOD composite restorations were analyzed under various photoactivation protocols in a real-time manner using holographic interferometry. During the first photoactivation protocol, the composite restoration was illuminated for 200 s continuously. In the second protocol, the polymerization lamp was first turned on for 5 s, then turned off for 120 s, and again turned on for a final 195 s. In both protocols, radiant exposure was the same. A significant decrease (p < 0.05) in cuspal deflection was found for two-step irradiation (average value of total cuspal deflection was 5.03 ± 0.62 µm) compared to continuous irradiation (average value of total cuspal deflection was 5.95 ± 0.65 µm). The two-step photoactivation protocol was found preferable, since it resulted in a significantly lower cuspal deflection (11% lower, compared to the continuous illumination).

[Three dimensional mathematical model of tooth for finite element analysis].

INTRODUCTION: The mathematical model of the abutment tooth is the starting point of the finite element analysis of stress and deformation of dental structures. The simplest and easiest way is to form a model according to the literature data of dimensions and morphological characteristics of teeth. Our method is based on forming 3D models using standard geometrical forms (objects) in programmes for solid modeling. OBJECTIVE: Forming the mathematical model of abutment of the second upper premolar for finite element analysis of stress and deformation of dental structures. METHODS: The abutment tooth has a form of a complex geometric object. It is suitable for modeling in programs for solid modeling SolidWorks. After analysing the literature data about the morphological characteristics of teeth, we started the modeling dividing the tooth (complex geometric body) into simple geometric bodies (cylinder, cone, pyramid,...). Connecting simple geometric bodies together or substricting bodies from the basic body, we formed complex geometric body, tooth. The model is then transferred into Abaqus, a computational programme for finite element analysis. Transferring the data was done by standard file format for transferring 3D models ACIS SAT. RESULTS: Using the programme for solid modeling SolidWorks, we developed three models of abutment of the second maxillary premolar: the model of the intact abutment, the model of the endodontically treated tooth with two remaining cavity walls and the model of the endodontically treated tooth with two remaining walls and inserted post. CONCLUSION: Mathematical models of the abutment made according to the literature data are very similar with the real abutment and the simplifications are minimal. These models enable calculations of stress and deformation of the dental structures. The finite element analysis provides useful information in understanding biomechanical problems and gives guidance for clinical research.

Thermal analysis of microlens formation on a sensitized gelatin layer.

We analyze a mechanism of direct laser writing of microlenses. We find that thermal effects and photochemical reactions are responsible for microlens formation on a sensitized gelatin layer. An infrared camera was used to assess the temperature distribution during the microlens formation, while the diffraction pattern produced by the microlens itself was used to estimate optical properties. The study of thermal processes enabled us to establish the correlation between thermal and optical parameters.

Properties of microlenses produced on a layer of tot'hema and eosin sensitized gelatin.

Gelatin sensitized with tot'hema and eosin (compounds used in medical therapy) appears to be an excellent material for microlens fabrication. Lenses are produced by irradiation with a 532 nm laser beam. Aspheric concave lenses are formed rapidly with low power radiation. The lens profile is analyzed, as well as imaging properties. Physics of lens formation is also proposed. All material constituents are nonpoisonous, resulting in an environmentally safe, low toxicity material.

Real-time measurement of internal stress of dental tissue using holography.

We describe a real-time holographic technique used to observe dental contraction due to photo-polymerization of dental filling during LED lamp illumination. An off-axis setup was used, with wet in-situ processing of the holographic plate, and consequent recording of interference fringes using CCD camera. Finite elements method was used to calculate internal stress of dental tissue, corresponding to experimentally measured deformation. A technique enables selection of preferred illumination method with reduced polymerization contraction. As a consequence, durability of dental filling might be significantly improved.