Fabrication and characterization of a novel zein/pectin/pumpkin seed oil Pickering emulsion and the effects of myricetin on oxidation stability.

In this study, zein/pectin/pumpkin seed oil (PSO) Pickering emulsions (ZPPEs) were fabricated loading with myricetin (MYT), and the quality control methods of oxidation stability were innovatively investigated. The microstructure and particle properties of zein-pectin particles were determined. The zein to pectin ratio of 5:3 and oil phase fraction (φ = 50 %) turned out as the most optimal conditions for the stabilization of myricetin-loaded ZPPEs. The expected oil-in-water emulsion-type structure was confirmed by confocal laser scanning microscopy (CLSM). The internal 3D structure of Pickering emulsions (Lugol's solution improved the water-phase contrast) was imaged by micro-computed tomography (Micro-CT) for the first time. Results showed a sponge like structure of water phase in emulsion with 42 µm as mean droplet size. Light-induced oxidation was evaluated with the PetroOxy method and malondialdehyde (MDA) assays. Encapsuling ZPPEs with MYT could prevent the light induced oxidation, especially, loading of MYT at the core of the emulsion. The analysis of Electronic nose (E-nose) was used to analyze the odor before and after UV-induced oxidation, and showed a good discrimination. This study provided a new approach to prepare ZPPEs with high oxidation stability. Micro-CT, PetroOxy and E-nose could be new methods for characterization and quality assessment of Pickering emulsions.

Heterocyclic aromatic amines in meat: Formation mechanisms, toxicological implications, occurrence, risk evaluation, and analytical methods.

Heterocyclic aromatic amines (HAAs) are detrimental substances can develop during the high-temperature cooking of protein-rich foods, such as meat. They are potent mutagens and carcinogens linked to an increased risk of various cancers. HAAs have complex structures with nitrogen-containing aromatic rings and are formed through chemical reactions between amino acids, creatin(in)e, and sugars during cooking. The formation of HAAs is influenced by various factors, such as food type, cooking temperature, time, cooking method, and technique. HAAs exert their toxicity through mechanisms like DNA adduct formation, oxidative stress, and inflammation. The research on HAAs is important for public health and food safety, leading to risk assessment and management strategies. It has also led to innovative approaches for reducing HAAs formation during cooking and minimizing related health risks. Understanding HAAs' chemistry and formation is crucial for developing effective ways to prevent their occurrence and protect human health. The current review presents an overview about HAAs, their formation pathways, and the factors influencing their formation. Additionally, it reviews their adverse health effects, occurrence, and the analytical methods used for measuring them.

Anticancer Potential of the Cyclolinopeptides.

Novel therapeutic agents to combat cancer is an active area of research, as current treatment options have limitations in efficacy and tolerability. One of these therapeutic agents in our immediate environment is cyclolinopeptides (CLPs). CLPs have several advantages that make them suitable for daily consumption and potential therapeutics in cancer research. They are natural compounds, having high specificity, low toxicity, low cost, and an overall simple extraction process. Over the years, numerous in vitro studies in cancer cells demonstrated CLPs to possess anti-proliferative, apoptotic, and anti-angiogenic effects, as well as the ability to induce cell cycle arrest and inhibit cancer cell growth in various cancer types, including breast cancer, gastric cancer, and melanoma. This paper provides an overview of the significance and potential of CLPs as therapeutic agents, emphasizing their promising role in cancer treatment based on different cancer cell lines. The mechanism of action of CLPs in cancer cells is multifaceted. It involves the modulation of multiple signaling pathways, including inhibition of protein kinases, modulation of apoptosis-related proteins, and regulation of oxidative stress and inflammation.

Identification and Characterization of the Stability of Hydrophobic Cyclolinopeptides From Flaxseed Oil.

Flaxseed (linseed) is a cultivar of the spring flowering annual plant flax (Linum usitatissimum) from the Linaceae family. Derivatives of this plant are widely used as food and as health products. In recent years, cyclic peptides isolated from flaxseed and flaxseed oil, better known as cyclolinopeptides (CLPs), have attracted the attention of the scientific community due to their roles in the inhibition of osteoclast differentiation or their antimalarial, immunosuppressive, and antitumor activities, as well as their prospects in nanotechnology and in the biomedical sector. This study describes the detection, identification, and measurement of CLPs in samples obtained from nine different flaxseed oil manufacturers. For the first time, Q Exactive Hybrid Quadrupole-Orbitrap Mass Spectrometer was used for CLP identification together with RP-HPLC. The routine analyses were performed using RP chromatography, measuring the absorption spectra and fluorescence detection for identifying tryptophan-containing peptides using the native fluorescence of tryptophan. In addition, existing protocols used for CLP extraction were optimized and improved in a fast and cost-efficient way. For the first time, 12 CLPs were separated using methanol/water as the eluent with RP-HPLC. Finally, the stability and degradation of individual CLPs in the respective flaxseed oil were examined over a period of 60 days at different temperatures. The higher temperature was chosen since this might reflect the cooking practices, as flaxseed oil is not used for high-temperature cooking. Using HPLC-MS, 15 CLPs were identified in total in the different flaxseed oils. The characterization of the peptides via HPLC-MS highlighted two types of CLP profiles with a substantial variation in the concentration and composition of CLPs per manufacturer, probably related to the plant cultivar. Among the observed CLPs, CLP-O, CLP-N, and CLP-B were the least stable, while CLP-C and CLP-A were the most stable peptides. However, it is important to highlight the gradual degradation of most of the examined CLPs over time, even at room temperature.

Food Ingredients and Nutraceuticals from Microalgae: Main Product Classes and Biotechnological Production.

Microalgal products are an emerging class of food, feed, and nutraceuticals. They include dewatered or dried biomass, isolated pigments, and extracted fat. The oil, protein, and antioxidant-rich microalgal biomass is used as a feed and food supplement formulated as pastes, powders, tablets, capsules, or flakes designed for daily use. Pigments such as astaxanthin (red), lutein (yellow), chlorophyll (green), or phycocyanin (bright blue) are natural food dyes used as isolated pigments or pigment-rich biomass. Algal fat extracted from certain marine microalgae represents a vegetarian source of n-3-fatty acids (eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), γ-linolenic acid (GLA)). Gaining an overview of the production of microalgal products is a time-consuming task. Here, requirements and options of microalgae cultivation are summarized in a concise manner, including light and nutrient requirements, growth conditions, and cultivation systems. The rentability of microalgal products remains the major obstacle in industrial application. Key challenges are the high costs of commercial-scale cultivation, harvesting (and dewatering), and product quality assurance (toxin analysis). High-value food ingredients are commonly regarded as profitable despite significant capital expenditures and energy inputs. Improvements in capital and operational costs shall enable economic production of low-value food products going down to fishmeal replacement in the future economy.

Investigation on the mitigation effects of furfuryl alcohol and 5-hydroxymethylfurfural and their carboxylic acid derivatives in coffee and coffee-related model systems.

The mitigation of furfuryl alcohol, 5-hydroxymethylfurfural, 2-furoic acid, and 5-hydroxymethyl 2-furoic acid was conducted in two dry model systems mimicking coffee and an actual coffee system by incorporating 14 chemicals, that are categorized to phenolic acids, flavonoids, non-phenolic antioxidants, and non-antioxidant agents. Mitigation effects were determined as the decrease in the levels of the studied furan derivatives after the systems went through a controlled roasting process. Strong mitigation effects in the dry model systems were observed after the application of phenolic acids, quinic acid or EDTA. The mitigation effects of phenolic acids and flavonoids depended on the number and availability of phenolic hydroxyl groups. Certain agents exhibited a furan derivative-specific reducing effect while most of them showed a generalized effect. The mitigation efficacy decreased with the increasing complexity of the tested systems. In the coffee system, mitigation effects were almost completely lost in comparison with dry model systems. Still, taurine and sodium sulfite exerted the strongest mitigation effect in the coffee system.

Why is sea buckthorn (Hippophae rhamnoides L.) so exceptional? A review.

Sea buckthorn (Hippophae L.) is a valuable, multipurpose plant extensively grown in Asia, Europe and Canada. In order to use it in the best way for products of human nutrition, it is necessary to recognize its positive aspects and to eliminate the negative ones. The exceptional value of sea buckthorn can be seen in the presence of both lipophilic antioxidants (mainly carotenoids and tocopherols) and hydrophilic antioxidants (flavonoids, tannins, phenolic acids, ascorbic acid) in remarkably high quantities. Some of the main nutrients, especially lipids of advantageous fatty acid composition, contribute to nutritional benefits of sea buckthorn products for a consumer as well. This review article focuses, besides the above mentioned compounds and vitamins, also on other important components, such as sugars, sugar derivatives, fibre, organic acids, proteins, amino acids and mineral elements. The article also deals with the effects of sea buckthorn components on the course of non-enzymatic browning of food and in vivo glycation. In addition, sensory perception of sea buckthorn and its constituents from the consumers point of view is discussed.

A Micromethod for Polyphenol High-Throughput Screening Saves 90 Percent Reagents and Sample Volume.

There is ample evidence that polyphenols are important natural substances with pronounced antioxidative properties. This study aimed to develop a fast and reliable method to determine total polyphenol content (TPC) in foodstuffs and human samples. The microtitration format offers the advantage of low sample volumes in the microlitre range, facilitating high-throughput screening with 40 samples simultaneously. We accordingly adjusted the so-called Folin-Ciocalteu method to a microtitre format (polyphenols microtitre-PPm) with 90% reduction of reagents. The assay was standardized with gallic acid in the range between 0.1 and 3 mM, using a 20 µL sample volume. The intra-assay coefficient of variation (CV) was less than 5%, and inter-assay CV was in the range of 10%. Wavelength was measured at 766 nm after two hours of incubation. This micromethod correlates significantly with both the classical Folin-Ciocalteu method and High-Performance Thin-Layer Chromatography (HPTLC) (r2 = 0.9829). We further observed a significant correlation between PPm and total antioxidants (r2 = 0.918). The highest polyphenol concentrations were obtained for red, blue, and black fruits, vegetables, and juices. Extracts of red grapes could be harvested almost sugar free and might serve as a basis for polyphenol supplementation. Beer, flour, and bread contained polyphenol concentrations sufficient to meet the minimal daily requirement. We conclude that PPm is a sensitive and reliable method that detects polyphenols even in samples diluted 10-fold. The literature strongly recommends further investigations on the effects of polyphenol uptake on human and animal health.

LC method for the direct and simultaneous determination of four major furan derivatives in coffee grounds and brews.

The simultaneous quantification of two potential genotoxic hydroxymethyl furan derivatives in coffee (furfuryl alcohol and 5-hydroxymethylfurfural) alongside their carboxylic acid derivatives (2-furoic acid and 5-hydroxymethyl furoic acid, respectively) was carried out. Their extraction from ground roasted coffee using sonication, simple shaking or heat-assisted shaking lead to similar results. A minimum of 97.3% of the four furan derivatives were extracted during the first extraction cycle using water, whereas methanol showed considerably lower extraction efficiency. A simple high-performance liquid chromatography method coupled with diode array detection was developed for the simultaneous determination and was applied to roasted coffee extracts or brews. No sample pre-treatment except for centrifugation was needed. The diode array detector was used to assess the purity of the peaks of interest in analyzed samples against authentic standards. The linearity according to Mandel, accuracy (recovery ≥ 89.9%) and precision (inter- and intraday relative standard deviation ≤ 4.5%) were checked. The values for the limit of detection and quantification ranged within 0.11-0.76 and 0.35-2.55 µg/mL, respectively. Filtered and espresso brews were analyzed for the four furan derivatives where furfuryl alcohol showed double the concentration of 5-hydroxymethylfurfural and about ten times the concentrations of 2-furoic acid or 5-hydroxymethyl furoic acid.

Parameters affecting the exposure to furfuryl alcohol from coffee.

Recently, furfuryl alcohol (FFA) was labelled a human potential carcinogen (group 2B) by the International Agency for Research on Cancer. Its alimentary exposure is mostly from coffee since in any other foods the concentrations are significantly lower. The various storage conditions of roasted coffee, the different brewing techniques applied and the bioaccessibility after ingestion are potential parameters that might alter the exposure to FFA from coffee. An 8 weeks stability study at varying temperatures showed that FFA is stable in the ground coffee matrix. Moreover, different brewing techniques extracted different amounts of FFA and affected its final concentration. The evaluation of the relative exposure to four furans (FFA, 5-hydroxymethyl-furaldehyde, 2-furoic acid, and 5-hydroxymethyl-2-furoic acid) revealed that FFA amounts were at least 2-fold the amounts of other studied furans in the same brew. A 22-fold variation in the concentration of the four furans in brews prepared using different coffee grounds and brewing techniques could be observed. 90% of the four furans were extracted by the first 25-30% fraction of the filter brew. A significant decrease of FFA is observed after stressing with simulated gastric fluid. However, this decrease could not be reproduced when mimicking a regular coffee ingestion situation.

Formation kinetics of furfuryl alcohol in a coffee model system.

The production of furfuryl alcohol from green coffee during roasting and the effect of multiple parameters on its formation were studied employing HPLC-DAD. Results show that coffee produces furfuryl alcohol in larger quantities (418µg/g) compared to other beans or seeds (up to 132µg/g) roasted under the same conditions. The kinetics of furfuryl alcohol production resemble those of other process contaminants (e.g., HMF, acrylamide) produced in coffee roasting, with temperature and time of roasting playing significant roles in quantities formed. Different coffee species yielded different amounts of furfuryl alcohol. The data point out that the amounts of furfuryl alcohol found in roasted coffee do not reflect the total amounts produced during roasting because great amounts of furfuryl alcohol (up to 57%) are evaporating and released to the atmosphere during roasting. Finally the effect of the moisture content on furfuryl alcohol formation was found to be of little impact.

Formation of potentially toxic carbonyls during oxidation of triolein in the presence of alimentary antioxidants.

ABSTRACT: A relation between oil uptake and cancer as well as induction of hepatic inflammation was shown earlier. It is discussed that the main oil oxidation products-hydroperoxides and carbonyls-might be the reason for the mentioned diseases. In this manuscript quantitative determination of aldehydes which are formed during oxidation of triolein-as a model substance-using the Rancimat 679 is described. The oxidation of 11 g of triolein is carried out at 120 °C sparging air with a flow of 20 dm3/h for 10 h. A series of aliphatic aldehydes starting from hexanal to decanal as well as decenal was identified by LC-MS/MS and quantified as DNPH derivatives. In addition, the total amount of carbonyls was determined. Based on the calibration with hexanal, all other dominant substances were in the similar concentration range with maximum concentrations of 1.6 µmol/cm3 of hexanal, 2.3 µmol/cm3 of heptanal, 2.5 µmol/cm3 of octanal, 3.2 µmol/cm3 of nonanal, 4.0 µmol/cm3 of decanal after 6 h. The total amount of carbonyls reached a maximum after 6 h being 27 µmol/cm3 for triolein without antioxidant. The results of this investigation will be a basis for further toxicological studies on oxidized oils.

Instant coffee as a source of antioxidant-rich and sugar-free coloured compounds for use in bakery: Application in biscuits.

Ammonia caramels are the most common antioxidant colour agent used in bakery formulations, although their high sugars content. An alternative could be coffee melanoidins, which are brown coloured compounds with antioxidant properties, readily available from instant coffee. However, high caffeine content is limiting its direct application. To evaluate the possibility of obtaining coloured melanoidin-rich, sugars- and caffeine-poor fractions from instant coffee, in this work, simple procedures based on their ethanol insolubility (fraction EtPp) or retention by ultrafiltration (fraction HWSn) were exploited. Melanoidins incorporation into biscuits formulation (amounts of 1, 5 and 10% w/w related to flour content) resulted in acceptable coloured products with higher antioxidant activity. The biscuits supplemented with 1% EtPp or HWSn had a low caffeine content. The caffeine of one espresso coffee was equivalent to 130 biscuits containing EtPp and 31 biscuits containing HWSn. Besides, both fractions did not promote extra formation of acrylamide or 5-hydroxymethylfurfural during baking.

The food processing contaminant glyoxal promotes tumour growth in the multiple intestinal neoplasia (Min) mouse model.

Glyoxal is formed endogenously and at a higher rate in the case of hyperglycemia. Glyoxal is also a food processing contaminant and has been shown to be mutagenic and genotoxic in vitro. The tumourigenic potential of glyoxal was investigated using the multiple intestinal neoplasia (Min) mouse model, which spontaneously develops intestinal tumours and is susceptible to intestinal carcinogens. C57BL/6J females were mated with Min males. Four days after mating and throughout gestation and lactation, the pregnant dams were exposed to glyoxal through drinking water (0.0125%, 0.025%, 0.05%, 0.1%) or regular tap water. Female and male offspring were housed separately from PND21 and continued with the same treatment. One group were only exposed to 0.1% glyoxal from postnatal day (PND) 21. There was no difference in the number of intestinal tumours between control and treatment groups. However, exposure to 0.1% glyoxal starting in utero and at PND21 caused a significant increase in tumour size in the small intestine for male and female mice in comparison with respective control groups. This study suggests that glyoxal has tumour growth promoting properties in the small intestine in Min mice.

An in vitro study on the genotoxic effect of substituted furans in cells transfected with human metabolizing enzymes: 2,5-dimethylfuran and furfuryl alcohol.

2,5-Dimethylfuran (DMF) and furfuryl alcohol (FFA) are two substituted furans that are formed during the processing of foods and have also been used as food flavorings. DMF and FFA are proposed to be bioactivated by human sulfotransferases (SULTs) which are not expressed in conventional cell lines used for genotoxicity testing. Therefore, in addition to the standard V79 cell line, we used a transfected V79 derived cell line co-expressing human cytochrome P450 (CYP) 2E1 and human SULT1A1 to assess the genotoxicity of DMF and FFA. The alkaline single cell gel electrophoresis (SCGE) assay was used to detect DNA damage in the form of single strand breaks and alkali-labile sites after exposure to DMF (0.5h; 0.5, 1, 1.5 or 2mM) or FFA (3h; 1, 3, 6 or 15mM). DMF induced DNA damage in V79 cells in a concentration-dependent manner irrespective of the expression of human CYP2E1 and SULT1A1. Almost no increase in the level of DNA damage was detected after exposure to FFA, except for a weak effect at the highest concentration in the transfected cell line. The results suggest that DNA damage in V79 cells from exposure to DMF detected by the alkaline SCGE assay is independent of human CYP2E1 and SULT1A1, and the genotoxic effect of FFA, as assessed by SCGE, is minimal in V79 cells.

A new method to measure oxygen solubility in organic solvents through optical oxygen sensing.

A new method to measure oxygen concentration in air-saturated organic solvents and binary mixtures has been developed. The methodology relies on the ability of HPLC columns to retain the molecular oxygen contained in different types of solvents which are injected into the system at 298.15 K. The outlet of the HPLC is coupled with an optical oxygen sensor which continuously measures changes in oxygen partial pressure.

Food-derived peroxidized fatty acids may trigger hepatic inflammation: a novel hypothesis to explain steatohepatitis.

BACKGROUND & AIMS: Obesity and hepatic steatosis are frequently associated with the development of a non-alcoholic steatohepatitis (NASH). The mechanisms driving progression of a non-inflamed steatosis to NASH are largely unknown. Here, we investigated whether ingestion of peroxidized lipids, as being present in Western style diet, triggers the development of hepatic inflammation. METHODS: Corn oil containing peroxidized fatty acids was administered to rats by gavage for 6 days. In a separate approach, hepatocytes (HC), endothelial (EC) and Kupffer cells (KC) were isolated from untreated livers, cultured, and incubated with peroxidized linoleic acid (LOOH; linoleic acid (LH) being the main fatty acid in corn oil). Samples obtained from in vivo and in vitro studies were mainly investigated by qRT-PCR and biochemical determinations of lipid peroxidation products. RESULTS: Rat treatment with peroxidized corn oil resulted in increased hepatic lipid peroxidation, upregulation of nitric oxide synthetase-2 (NOS-2), cyclooxygenase-2 (COX-2), interleukin-1ß (IL-1ß), and tumor necrosis factor-α (TNFα), elevation of total nitric oxides, and increase in cd68-, cd163-, TNFα-, and/or COX-2 positive immune cells in the liver. When investigating liver cell types, LOOH elevated the secretion of TNFα, p38MAPK phosphorylation, and mRNA levels of NOS-2, COX-2, and TNFα, mainly in KC. The elevation of gene expression could be abrogated by inhibiting p38MAPK, which indicates that p38MAPK activation is involved in the pro-inflammatory effects of LOOH. CONCLUSIONS: These data show for the first time that ingestion of peroxidized fatty acids carries a considerable pro-inflammatory stimulus into the body which reaches the liver and may trigger the development of hepatic inflammation.

Enzyme-based online monitoring and measurement of antioxidant activity using an optical oxygen sensor coupled to an HPLC system.

It is estimated that up to 50% of the adult population take antioxidant products on a daily basis to promote their health status. Strangely, despite the well-recognized importance of antioxidants, currently there is no international standard index for labeling owing to the lack of standardized methods for antioxidant measurement in complex products. Here, an online high-performance liquid chromatography (HPLC)-based method to detect and measure the total antioxidant capacity of antioxidant samples is presented. In this approach, complex samples containing antioxidants are separated by the HPLC system, which is further coupled to an antioxidant measuring system consisting of an optical oxygen sensor, laccase, and tetramethoxy azobismethylene quinone (TMAMQ). The antioxidants, separated via HPLC, reduce TMAMQ to syringaldazine, which is then reoxidized by laccase while simultaneously consuming O(2). The amount of consumed oxygen is directly proportional to the concentration of antioxidants and is measured by the optical oxygen sensor. The sensor is fabricated by coating a glass capillary with an oxygen-sensitive thin layer made of platinum(II) meso-tetra(4-fluorophenyl)tetrabenzoporphyrin and polystyrene, which makes real-time analysis possible (t(90) = 1.1 s in solution). Four selected antioxidants (3 mM), namely, catechin, ferulic acid, naringenin (used as a control), and Trolox, representing flavonol, hydrocinnamic acid, flavanone, and vitamin E, respectively, were injected into the online antioxidant monitoring system, separated, and then mixed with the TMAMQ/laccase solution, which resulted in oxygen consumption. This study shows that, with the use of such a system, the antioxidant activity of individual antioxidant molecules in a sample and their contribution to the total antioxidant activity of the sample can be correctly assigned.

Characterization of the polymerization of furfuryl alcohol during roasting of coffee.

The polymerization of furfuryl alcohol contributes to the formation of the brown colour in heated foods, in addition to the Maillard and caramelization reactions. During the heating of food, furfuryl alcohol is formed via the degradation of quinic acid or 1,2-enediols. Furfuryl alcohol is a mutagenic compound. In acidic conditions it is able to polymerize and form aliphatic polymers that show a brown colour. Herein we show that furfuryl alcohol polymerizes in a model system by incubating it in 1 M HCl at room temperature. Some of the reaction products are dimers, trimers, tetramers, and pentamers with methylene linkages. The degree of polymerization and the amount of those furfuryl alcohol oligomers increased with increasing reaction time. The results of this model system were used to characterize the polymerization of furfuryl alcohol which is produced during roasting of coffee. The coffee was roasted at 210 °C for 2, 3, 4, 5, and 6 min with a home coffee roaster. Furfuryl alcohol and its dimer were found in roasted coffee after 2 and 3 min of roasting respectively, reaching a maximum amount after 4 min. Perhaps due to further reactions, the dimeric furfuryl alcohol concentration starts to decrease after 4 min. We propose that the polymers of furfuryl alcohol contribute to the brown colour of roasted foods.

Hydroxymethyl-substituted furans: mutagenicity in Salmonella typhimurium strains engineered for expression of various human and rodent sulphotransferases.

5-Hydroxymethylfurfural (HMF) and furfuryl alcohol (FFA) are present in numerous foodstuffs at high levels. FFA is also used for the production of polymers. Both compounds had demonstrated some evidence of carcinogenic activity in 2-year bioassays. We tested these compounds and four congeners for mutagenicity in Salmonella typhimurium TA100 and TA100-derived strains expressing human or rodent sulphotransferases (SULTs). 5-Hydroxymethylfuroic acid, a metabolite of HMF, was not mutagenic in any strain. 3-Hydroxymethylfuran was weakly mutagenic in all strains independently of SULT expression. HMF, 2,5-(bishydroxymethyl)furan (metabolite of HMF), FFA and 5-methyl-FFA were inactive in TA100 but strongly mutagenic when human SULT1C2 was expressed. This form has been detected in ovary, kidney and foetal tissues. Human SULT1A1, SULT1A2 and SULT1A3 as well as murine Sult1a1 and Sult1d1 also activated some hydroxymethyl-substituted furans to varying degrees. Whereas chemically synthesised 5-sulphooxymethylfurfural was mutagenic in TA100, furfuryl sulphate was bacteriotoxic, only leading to marginal increases in the number of revertants. Furfuryl acetate, an uncharged ester of FFA, used as fragrance and food flavouring, was clearly mutagenic. We determined half-life times of 120 min, 20 s and 10 h, respectively, for 5-sulphooxymethylfurfural, furfuryl sulphate and furfuryl acetate at 37°C in water. It is likely that the short lifespan of furfuryl sulphate, together with its charge, led to insufficient penetration of the bacteria when added externally, although it was mutagenic when generated by appropriate SULTs from FFA within the cell.