Two into one does go: Formulation development of a multipurpose combination vaginal ring releasing dapivirine and metronidazole for prevention of HIV infection and treatment of bacterial vaginosis.

Bacterial vaginosis (BV) is a common but often asymptomatic dysbiosis of the human vagina characterized by an imbalance in the normal vaginal microbiota due to loss of lactobacilli and an overgrowth of certain anaerobic bacteria. While BV itself is not a sexually transmitted infection, it is associated with an increased risk in women of various sexually acquired infections, including human immunodeficiency virus (HIV) infection. There is, therefore, a strong rationale for pursuing new multipurpose products that seek to treat or prevent BV alongside preventing HIV infection. With the dapivirine-releasing vaginal ring for HIV prevention now approved in several African countries, here we report formulation development of a next-generation ring product that releases both dapivirine (DPV) and the antibiotic drug metronidazole (MET). Following thermal analysis studies to characterize the phase behaviour of DPV-MET mixtures and rheological analysis to assess the cure characteristics of the active silicone elastomer mixes, matrix-type rings were manufactured containing 25 or 200 mg DPV in combination with 100, 250, 500, 1000 or 2000 mg MET. The results for drug content, in vitro release, mechanical testing, and Gardnerella vaginalis time-kill experiments demonstrate the feasibility of incorporating both DPV and MET in a matrix-type ring formulation and indicate that clinically effective release rates may be possible.

Refining the in vitro release test method for a dapivirine-releasing vaginal ring to match in vivo performance.

Previously reported in vitro release test methods for drug-releasing vaginal rings containing poorly water-soluble drugs have described use of water-alcohol systems or surfactant solutions in efforts to maintain sink conditions. Here, as part of efforts to more closely match in vitro and in vivo release for the 25 mg dapivirine matrix-type silicone elastomer vaginal ring for HIV prevention, we have investigated alternatives to the 1:1 v/v water/isopropanol medium described previously. Specifically, we evaluated dapivirine release from rings into (i) monophasic water/isopropanol mixtures of varying compositions and (ii) biphasic buffer/octanol systems using pH 4.2 and pH 7.0 buffers. The rate and mechanism of dapivirine release were dependent upon the isopropanol concentration in the release medium, in accordance with the observed trend in drug solubility. At 0 and 10% v/v isopropanol concentrations, dapivirine release followed a partition-controlled mechansim. For media containing ≥ 20% v/v isopropanol, in vitro release of dapivirine was significantly increased and obeyed permeation-controlled kinetics. Cumulative release of ~3.5 mg dapivirine over 28 days was obtained using a water isopropanol mixture containing 20% v/v isopropanol, similar to the ~4 mg dapivirine released in vivo. Dapivirine release into the biphasic buffer/octanol system (intended to mimic the fluid/tissue environment in vivo) was constrained by the limited solubility of dapivirine in the buffer component in which the ring resided, such that cumulative dapivirine release was consistently lower than that observed with the 20% v/v isopropanol in water medium. Release into the biphasic system was also pH dependent, in line with dapivirine's pKa and with potential implications for in vivo release and absorption in women with elevated vaginal pH.

In vitro drug release, mechanical performance and stability testing of a custom silicone elastomer vaginal ring releasing dapivirine and levonorgestrel.

We have previously reported a multipurpose silicone elastomer vaginal ring providing sustained release of dapivirine (an antiretroviral) and levonorgestrel (a progestin) for HIV prevention and hormonal contraception. During initial development, issues arose due to reaction between the ethynyl group in the levonorgestrel molecule and the hydride-functionalised polydimethylsiloxane components in the silicone elastomer formulation. This unwanted reaction occurred both during and to a lesser extent after ring manufacture, impacting the curing process, the mechanical properties of the ring, and the in vitro release of levonorgestrel. Recently, we reported custom silicone elastomer grades that minimise this reaction. In this follow-on study, we describe the manufacture, in vitro drug release, mechanical, and pharmaceutical stability testing of ring formulations prepared from a custom silicone elastomer and containing 200 mg dapivirine and 80, 160, 240 or 320 mg levonorgestrel. The rings showed mechanical properties similar to marketed ring products, sustained in vitro release of both drugs over 30 days in quantities deemed clinically relevant, offered acceptable assay values, and provided good product stability over 15 weeks at 40 °C and 75% relative humidity.

Use of simulated vaginal and menstrual fluids to model in vivo discolouration of silicone elastomer vaginal rings.

Vaginal rings releasing antiretrovirals - either alone or in combination with contraceptive progestins - are being developed for prevention of human immunodeficiency virus (HIV) transmission via vaginal sex. Following Phase I trials, significant discolouration was observed on the surface of investigational silicone elastomer antiretroviral-contraceptive matrix-type vaginal rings containing either 25 mg dapivirine or 200 mg dapivirine plus levonorgestrel. In this study, potential causes of the discolouration have been assessed in vitro using simulated vaginal and menstrual fluids (SVF and SMF, respectively) to model in vivo exposure. The fluid compositions also included hydrogen peroxide (H2O2), hydrogen peroxide plus a copper intrauterine device (IUD), or synthetic dyes (representing personal care and household cleaning products). No discolouration was observed for rings exposed to SVF + hydrogen peroxide (with or without an IUD). However, the SVF + dye compositions showed significant ring discolouration, with staining patterns similar to those observed with rings that had been exposed to highly-coloured personal care and household cleaning products during clinical trial use. Exposure of rings to SMF compositions invariably caused yellow surface discolouration, dark spotting and markings, similar to the staining patterns observed following clinical use. The darker marks on the ring surface were identified as blood debris derived from the SMF. The study indicates that surface discolouration of rings in vivo can be attributed to exposure to menstrual fluid or highly coloured personal care or household cleaning products. Discolouration of the rings was not associated with any specific safety risks for the user, though severe discolouration could potentially impact acceptability and adherence.

Silicone elastomer formulations for improved performance of a multipurpose vaginal ring releasing dapivirine and levonorgestrel.

A dapivirine-releasing silicone elastomer vaginal ring for reducing women's risk of HIV acquisition has recently been approved. A next-generation multipurpose vaginal ring releasing dapivirine and levonorgestrel is currently in development, offering hormonal contraception and HIV prevention from a single device. Previously, we reported challenges with incorporating levonorgestrel into rings manufactured from addition-cure silicone elastomers due to an irreversible chemical reaction between the levonorgestrel molecule and the hydride-functionalised crosslinker component of the silicone elastomer formulation, leading to low drug content assay, cure inhibition, and reduced ring mechanical properties (which may account for the increased incidence of ring expulsion in vivo). Here, we report on the development and testing of various custom silicone elastomer materials specifically formulated to circumvent these issues. After extensive testing of the custom silicones and subsequent manufacture and testing (Shore M hardness, pot life, content assay, oscillatory rheology, mechanical testing) of rings containing both dapivirine and levonorgestrel, a lead candidate formulation was selected that was amenable to practical ring manufacture via injection molding, exhibited no substantial levonorgestrel binding, and offered suitable mechanical properties.

In vitro release testing methods for drug-releasing vaginal rings.

Drug-releasing vaginal rings are torus-shaped devices, generally fabricated from thermoplastic polymers or silicone elastomers, used to administer pharmaceutical drugs to the human vagina for periods typically ranging from three weeks to twelve months. One of the most important product performance tests for vaginal rings is the in vitro release test. Although it has been fifty years since a vaginal ring device was first described in the scientific literature, and despite seven drug-releasing vaginal rings having been approved for market, there is no universally accepted method for testing in vitro drug release, and only one non-compendial shaking incubator method (for the estradiol-releasing ring Estring®) is described in the US Food and Drug Administration's Dissolution Methods Database. Here, for the first time, we critically review the diverse range of test methods that have been described in the scientific literature for testing in vitro release of drug-releasing vaginal rings. Issues around in vitro-in vivo correlation and modelling of in vitro release data are also discussed.

Towards a dapivirine and levonorgestrel multipurpose vaginal ring: Investigations into the reaction between levonorgestrel and addition-cure silicone elastomers.

With a dapivirine-releasing vaginal ring having successfully completed late-stage clinical testing for HIV prevention and currently undergoing regulatory review, there is now growing interest in next-generation multipurpose prevention technologies that seek to combine antiretroviral and contraceptive drugs within a single product. Here, we focus on ongoing efforts to develop a silicone elastomer vaginal ring releasing both dapivirine and levonorgestrel. Specifically, we evaluate various strategies aimed at both better understanding and reducing the tendency of levonorgestrel to bind with the elastomer, including: (i) formulation and post-manufacturing strategies aimed at reducing the extent of levonorgestrel reaction with addition-cure silicone elastomers; (ii) evaluation of a simple silicone system to model the complex elastomer; (iii) use of model compounds representing the enone and ethinyl moieties of levonorgestrel to probe the mode of addition of levonorgestrel to addition-cure silicone elastomers; and (iv) solution and solid-state 13C NMR analysis to probe the structural features of the levonorgestrel-silicone system. The results demonstrate that both the enone and ethinyl groups within levonorgestrel undergo hydrosilylation reactions with the hydrosiloxane groups in the silicone elastomer leading to covalent binding. The results also highlight potential strategies for further optimising the dapivirine + levonorgestrel silicone vaginal ring formulation to ensure that the levonorgestrel is available for release.

Post-use ring weight and residual drug content as potential objective measures of user adherence to a contraceptive progesterone vaginal ring.

OBJECTIVES: The primary aim was to investigate post-use ring weight as a potential measure of cumulative adherence to a progesterone-releasing vaginal ring. STUDY DESIGN: We weighed and quantified residual progesterone in 115 vaginal rings following 90-day use by participants in an acceptability trial conducted in Nigeria, Senegal and Kenya. The primary objective was to correlate residual progesterone content with post-use ring weight. Secondary objectives included correlating ring weight with putative duration of ring use, and, where participants used two rings consecutively in the study, correlating residual content between these paired rings. RESULTS: Mean ring weight and progesterone content of used rings was 8.62±0.24 g and 1245±245 mg respectively, versus 9.37±0.02 and 2058±21 mg for control rings. Most used rings (90.4%) had residual progesterone levels less than 85% of the nominal loading. Linear regression showed a strong positive linear trend between residual progesterone content and post-use ring weight for all rings (r2=0.82). Duration of ring use was inversely associated (p=.00020) with ring weight. CONCLUSIONS: Post-use ring weight is highly correlated with residual progesterone content, a benchmark objective cumulative measure of adherence, and thus potentially useful as a surrogate objective measure of cumulative adherence to a progesterone-releasing vaginal ring. IMPLICATION STATEMENT: For vaginal rings containing a high initial drug loading and releasing a relatively large fraction of the initial loading during clinical use, post-use ring weight may offer a simple and inexpensive alternative to residual content testing for accurate monitoring of user adherence.

Drug stability and product performance characteristics of a dapivirine-releasing vaginal ring under simulated real-world conditions.

In two recent Phase III clinical trials, use of a 25 mg dapivirine vaginal ring significantly reduced HIV acquisition rates. Post hoc analysis from one of the trials indicated higher rates of protection among women over the age of 21 years when compared to younger women, most likely due to reduced adherence in the latter group. There is currently no information available on how release of dapivirine from the ring is affected by either its intermittent removal from the vagina or women's cleaning of the ring before re-insertion. Here, in vitro drug stability and product performance characteristics of the dapivirine ring were assessed under simulated conditions of real-world use. The impact of systematic deviations from the 28-day continuous use protocol upon in vitro release performance, was investigated. Also, the effect of ring exposure to a range of common household chemicals - including bath salts, bleach, detergent and personal lubricants - was examined through measurement of dapivirine content and stability. Dapivirine in vitro release under intermittent schedules was similar to that obtained under the normal continuous schedule ignoring the periods of interruption. Ring exposure to various household chemicals had no discernible impact on dapivirine assay value, degradation or stability.

Mechanical testing methods for drug-releasing vaginal rings.

Vaginal rings (VRs) are currently marketed for contraceptive or hormone regulation purposes, and investigationally, have been widely reported for delivery of antiretrovirals to reduce HIV transmission. To date, there is no national or international standard for the mechanical testing and minimum performance characteristics of any VR based products. Here, we describe a series of mechanical tests examining the durometer hardness, static and dynamic compression response, tensile properties and twist resistance of vaginal rings. The tests were conducted on currently marketed VRs and a number of the International Partnership for Microbicides' (IPM) investigational VR formulations. With wider application in the field, the tests described herein could form the basis for a more standardised approach to the mechanical testing of VRs.

Impact of ring size and drug loading on the pharmacokinetics of a combination dapivirine-darunavir vaginal ring in cynomolgus macaques.

This work investigates the impact of vaginal ring size and drug loading on the in vitro release, safety, ease of fit, and pharmacokinetics in cynomolgus macaques of matrix-type silicone elastomer vaginal rings containing a combination of the non-nucleoside reverse transcriptase inhibitor dapivirine and the protease inhibitor darunavir. Drug-free and drug-loaded vaginal rings having three different geometries were manufactured by reaction injection molding. In vitro drug release was assessed using both a solvent/water mixture and a vaginal fluid simulant. Macaques fitted with drug-free vaginal rings for 28 days were assessed by colposcopy, cytological evaluation of cervico-vaginal lavage and histological evaluation of tissue after ring removal. The 20 × 4.5 mm combination ring, deemed most appropriate for vaginal fit and comfort in the macaques, was evaluated for pharmacokinetics over 28 days. Substantial differences were observed in the in vitro release profiles between the three ring sizes. However, these differences were not manifest in vivo, where measured drug concentrations after 20 × 4.5 mm ring use were not significantly different from those reported previously with a 25 × 6 mm ring. These results suggest that ring placement and fit is an important species-specific study parameter that should be optimised prior to pharmacokinetic testing.

Packing Polymorphism of Dapivirine and Its Impact on the Performance of a Dapivirine-Releasing Silicone Elastomer Vaginal Ring.

A silicone elastomer vaginal ring providing sustained release over 28 days of the anti-retroviral microbicide dapivirine has recently completed phase III clinical testing and showed moderate protection against HIV acquisition. In support of the product licensure program, we report the impact of dapivirine packing polymorphism on the thermal and solubility characteristics of dapivirine and on the in vitro performance of the 25 mg dapivirine ring product. This is the first time that polymorphism has been reported for a drug-releasing vaginal ring product. Thermal, particle size, powder X-ray diffraction, and thermodynamic solubility analyses of dapivirine polymorphic forms I and IV, both of which are persistent at room temperature and with form I being the thermodynamically stable form, were conducted for both micronized and non-micronized materials. No significant differences in solubility between DPV forms I and IV were observed in media commonly used for in vitro release testing. Matrix-type silicone elastomer vaginal rings were manufactured and the impact of dapivirine polymorphism on key in vitro parameters (compression and tensile behavior; content assay; in vitro release; residual content assay) was investigated. The data demonstrate that dapivirine packing polymorphism has no significant impact on in vitro performance of the 25 mg dapivirine vaginal ring.

Matrix and reservoir-type multipurpose vaginal rings for controlled release of dapivirine and levonorgestrel.

A matrix-type silicone elastomer vaginal ring providing 28-day continuous release of dapivirine (DPV) - a lead candidate human immunodeficiency virus type 1 (HIV-1) microbicide compound - has recently demonstrated moderate levels of protection in two Phase III clinical studies. Here, next-generation matrix and reservoir-type silicone elastomer vaginal rings are reported for the first time offering simultaneous and continuous in vitro release of DPV and the contraceptive progestin levonorgestrel (LNG) over a period of between 60 and 180days. For matrix-type vaginal rings comprising initial drug loadings of 100, 150 or 200mg DPV and 0, 16 or 32mg LNG, Day 1 daily DPV release values were between 4132 and 6113µg while Day 60 values ranged from 284 to 454µg. Daily LNG release ranged from 129 to 684µg on Day 1 and 2-91µg on Day 60. Core-type rings comprising one or two drug-loaded cores provided extended duration of in vitro release out to 180days, and maintained daily drug release rates within much narrower windows (either 75-131µg/day or 37-66µg/day for DPV, and either 96-150µg/day or 37-57µg/day for LNG, depending on core ring configuration and ignoring initial lag release effect for LNG) compared with matrix-type rings. The data support the continued development of these devices as multi-purpose prevention technologies (MPTs) for HIV prevention and long-acting contraception.

Microbicide vaginal rings: Technological challenges and clinical development.

Vaginal rings (VRs) are flexible, torus-shaped, polymeric devices designed to sustain delivery of pharmaceutical drugs to the vagina for clinical benefit. Following first report in a 1970 patent application, several steroid-releasing VR products have since been marketed for use in hormone replacement therapy and contraception. Since 2002, there has been growing interest in the use of VR technology for delivery of drugs that can reduce the risk of sexual acquisition of human immunodeficiency virus type 1 (HIV-1), the causative agent of acquired immunodeficiency syndrome (AIDS). Although no vaginally-administered product has yet been approved for HIV reduction/prevention, extensive research efforts are continuing and a number of VR devices offering sustained release of so-called 'HIV microbicide' compounds are currently being evaluated in late-stage clinical studies. This review article provides an overview of the published scientific literature within this important field of research, focusing primarily on articles published within peer-reviewed journal publications. Many important aspects of microbicide-releasing VR technology are discussed, with a particular emphasis on the technological, manufacturing and clinical challenges that have emerged in recent years.

Controlling levonorgestrel binding and release in a multi-purpose prevention technology vaginal ring device.

Despite a long history of incorporating steroids into silicone elastomers for drug delivery applications, little is presently known about the propensity for irreversible drug binding in these systems. In this study, the ability of the contraceptive progestin levonorgestrel to bind chemically with hydrosilane groups in addition-cure silicone elastomers has been thoroughly investigated. Cure time, cure temperature, levonorgestrel particle size, initial levonorgestrel loading and silicone elastomer type were demonstrated to be key parameters impacting the extent of levonorgestrel binding, each through their influence on the solubility of levonorgestrel in the silicone elastomer. Understanding and overcoming this levonorgestrel binding phenomenon is critical for the ongoing development of a number of drug delivery products, including a multi-purpose technology vaginal ring device offering simultaneous release of levonorgestrel and dapivirine - a lead candidate antiretroviral microbicide - for combination HIV prevention and hormonal contraception.

Sustained release of the candidate antiretroviral peptides T-1249 and JNJ54310516-AFP from a rod insert vaginal ring.

Administration of biomacromolecular drugs in effective quantities from conventional vaginal rings is hampered by poor drug permeability in the polymers from which rings are commonly constructed. Here, we report the formulation development and testing of rod insert rings for sustained release of the candidate antiretroviral peptides T-1249 and JNJ54310516-AFP (JNJ peptide), both of which have potential as HIV microbicides. Rod inserts were prepared comprising antiviral peptides T-1249 or JNJ peptide in combination with a hydrophilic excipient (sodium chloride, sodium glutamate, lactose or zinc acetate) dispersed at different loadings within a medical grade silicone elastomer. The inserts were tested for weight change and swelling when immersed in simulated vaginal fluid (SVF). Dye migration into the inserts was also assessed visually over 28 days. In vitro release of T-1249 and JNJ peptide from rings containing various insert types was tested. Weight change and degree of swelling of rods immersed in SVF was dependent on the type and concentration of excipient present. The rods displayed the following rank order in terms of weight change: sodium glutamate > zinc acetate ≈ sodium chloride > lactose. The weight change and degree of swelling of the inserts did not correlate with the level of dye uptake observed. In vitro release of T-1249 was improved through addition of lactose, sodium chloride and sodium glutamate, while release of JNJ peptide was improved through addition of sodium chloride or sodium glutamate. Sustained release of hydrophobic peptides can be achieved using a rod insert ring design formulated to include a hydrophilic excipient. Release rates were dependent upon the type of excipient used. The degree of release improvement with different inserts partially reflects their ability to imbibe surrounding fluid and swell in aqueous environments.

Pre-clinical development of a combination microbicide vaginal ring containing dapivirine and darunavir.

OBJECTIVES: Combination microbicide vaginal rings may be more effective than single microbicide rings at reducing/preventing sexual transmission of HIV. Here, we report the pre-clinical development and macaque pharmacokinetics of matrix-type silicone elastomer vaginal rings containing dapivirine and darunavir. METHODS: Macaque rings containing 25 mg dapivirine, 100 mg dapivirine, 300 mg darunavir or 100 mg dapivirine+300 mg darunavir were manufactured and characterized by differential scanning calorimetry. In vitro release was assessed into isopropanol/water and simulated vaginal fluid. Macaque vaginal fluid and blood serum concentrations for both antiretrovirals were measured during 28 day ring use. Tissue levels were measured on day 28. Ex vivo challenge studies were performed on vaginal fluid samples and IC50 values were calculated. RESULTS: Darunavir caused a concentration-dependent reduction in the dapivirine melting temperature in both solid drug mixes and in the combination ring. In vitro release from rings was dependent on drug loading, the number of drugs present and the release medium. In macaques, serum concentrations of both microbicides were maintained between 10(1) and 10(2) pg/mL. Vaginal fluid levels ranged between 10(3) and 10(4) ng/g and between 10(4) and 10(5) ng/g for dapivirine and darunavir, respectively. Both dapivirine and darunavir showed very similar concentrations in each tissue type; the range of drug tissue concentrations followed the general rank order: vagina (1.8 × 10(3)-3.8 × 10(3) ng/g)  > cervix (9.4 × 10(1)-3.9 × 10(2) ng/g)  > uterus (0-108 ng/g)  > rectum (0-40 ng/g). Measured IC50 values were >2 ng/mL for both compounds. CONCLUSIONS: Based on these results, and in light of recent clinical progress of the 25 mg dapivirine ring, a combination vaginal ring containing dapivirine and darunavir is a viable second-generation HIV microbicide candidate.

Modified silicone elastomer vaginal gels for sustained release of antiretroviral HIV microbicides.

We previously reported nonaqueous silicone elastomer gels (SEGs) for sustained vaginal administration of the CCR5-targeted entry inhibitor maraviroc (MVC). Here, we describe chemically modified SEGs (h-SEGs) in which the hydrophobic cyclomethicone component was partially replaced with relatively hydrophilic silanol-terminated polydimethylsiloxanes (st-PDMS). MVC and emtricitabine (a nucleoside reverse transcriptase inhibitor), both currently under evaluation as topical microbicides to counter sexual transmission of human immunodeficiency virus type 1 (HIV-1), were used as model antiretroviral (ARV) drugs. Gel viscosity and in vitro ARV release were significantly influenced by st-PDMS molecular weight and concentration in the h-SEGs. Unexpectedly, gels prepared with lower molecular weight grades of st-PDMS showed higher viscosities. h-SEGs provided enhanced release over 24 h compared with aqueous hydroxyethylcellulose (HEC) gels, did not modify the pH of simulated vaginal fluid (SVF), and were shown to less cytotoxic than standard HEC vaginal gel. ARV solubility increased as st-PDMS molecular weight decreased (i.e., as percentage hydroxyl content increased), helping to explain the in vitro release trends. Dye ingression and SVF dilution studies confirmed the increased hydrophilicity of the h-SEGs. h-SEGs have potential for use in vaginal drug delivery, particularly for ARV-based HIV-1 microbicides.

A non-inferiority randomized controlled trial comparing the clinical effectiveness of anesthesia obtained by application of a novel topical anesthetic putty with the infiltration of lidocaine for the treatment of lacerations in the emergency department.

STUDY OBJECTIVE: We test the hypothesis that anesthesia, measured as pain scores, induced by a novel topical anesthetic putty is non-inferior (margin=1.3) to that provided by conventional lidocaine infiltration for the repair of lacerations. METHODS: A randomized controlled trial was conducted in the emergency department (ED) of a local hospital. Participants were randomly allocated to receive either infiltration anesthesia or topical anesthetic putty as per the trial protocol. Pain scores were recorded 15 minutes after infiltration and 30 minutes after topical anesthetic putty application. Median pain scores were compared between groups. Wound evaluation scores were conducted after 7 to 10 days and adverse events were monitored for both groups of participants throughout the study. RESULTS: One hundred and ten participants were enrolled in the study, with 56 receiving infiltration and 54 receiving topical anesthetic putty. The median difference between the pain scores of the 2 groups was 0 (95% confidence interval -1 to 0). There were no substantial differences between the 2 groups in terms of either the wound evaluation scores or the incidence of adverse events. CONCLUSION: The novel topical anesthetic putty was not inferior to infiltration with lidocaine with respect to the pain experienced during suturing, and this putty is a feasible alternative to infiltration anesthesia of lacerations in the ED.

Partial protection against multiple RT-SHIV162P3 vaginal challenge of rhesus macaques by a silicone elastomer vaginal ring releasing the NNRTI MC1220.

OBJECTIVES: The non-nucleoside reverse transcriptase inhibitor MC1220 has potent in vitro activity against HIV type 1 (HIV-1). A liposome gel formulation of MC1220 has previously been reported to partially protect rhesus macaques against vaginal challenge with a simian HIV (SHIV). Here, we describe the pre-clinical development of an MC1220-releasing silicone elastomer vaginal ring (SEVR), including pharmacokinetic (PK) and efficacy studies in macaques. METHODS: In vitro release studies were conducted on SEVRs loaded with 400 mg of MC1220, using simulated vaginal fluid (SVF, n = 4) and 1 : 1 isopropanol/water (IPA/H(2)O, n = 4) as release media. For PK evaluation, SEVRs were inserted into adult female macaques (n = 6) for 30 days. Following a 1 week washout period, fresh rings were placed in the same animals, which were then challenged vaginally with RT-SHIV162P3 once weekly for 4 weeks. RESULTS: SEVRs released 1.66 and 101 mg of MC1220 into SVF and IPA/H(2)O, respectively, over 30 days, the differential reflecting the low aqueous solubility of the drug. In macaque PK studies, MC1220 was consistently detected in vaginal fluid (peak 845 ng/mL) and plasma (peak 0.91 ng/mL). Kaplan-Meier analysis over 9 weeks showed significantly lower infection rates for animals given MC1220-containing SEVRs than placebo rings (hazard ratio 0.20, P = 0.0037). CONCLUSIONS: An MC1220-releasing SEVR partially protected macaques from vaginal challenge. Such ring devices are a practical method for providing sustained, coitally independent protection against vaginal exposure to HIV-1.