RESUMEN
Amide bioisoterism is a widely used strategy in drug development to fine-tune physicochemical, pharmacokinetic, and metabolic properties, eliminate toxicity and gain intellectual property rights in uncharted chemical space. Of these, oxetane-amines offer particularly exciting possibilities as bioisosteres, although they are less frequently investigated than warranted due to the lack of simple and widely applicable synthetic methods. Herein, we report a two-step, practical, modular, robust, and scalable method for the construction of oxetane-containing amide bioisosteres that relies on the readily available oxetan-3-one. This operationally simple procedure exploits the enhanced reactivity of the keto group of the commercially available oxetan-3-one to form amine-benzotriazole intermediates, which springloaded adducts are then reacted with various aliphatic and aromatic organometallic reagents under mild conditions to afford various amino-oxetanes in good to high yields. The simplicity and broad applicability of the method greatly facilitates the synthesis of derivatives that were previously difficult or impossible to produce. The usefulness of this method in the field medicinal chemistry was also demonstrated by eliminating the well-known metabolic problem of ketoconazole.
RESUMEN
Fluorine-containing saturated nitrogen heterocycles are very attractive structures in medicinal and biological chemistry because fluorine can be used to tune conformation as well as key properties such as basicity and bioavailability. At present cyclic fluorinated amines are accessed using hazardous reagents such as DAST or by lengthy synthesis routes. Here we report a modular two-step synthesis of cyclic ß-fluoroalkyl amines using a photoredox-catalysed cyclisation/hydrogen atom transfer reaction of bromodifluoroethylamines.
RESUMEN
We have developed a general and practical approach towards 2-oxabicyclo[2.1.1]hexanes with two and three exit vectors via an iodocyclization reaction. The obtained compounds have been easily converted into the corresponding building blocks for use in medicinal chemistry. 2-Oxabicyclo[2.1.1]hexanes have been incorporated into the structure of five drugs and three agrochemicals, and validated biologically as bioisosteres of ortho- and meta-benzenes.
RESUMEN
A one-step approach to borylated cyclobutanes from amides of carboxylic acids and vinyl boronates is elaborated. The reaction proceeds via the thermal [2 + 2]-cycloaddition of in situ-generated keteniminium salts.
RESUMEN
Electron-rich, electron-deficient, and non-activated alkenes can be rapidly functionalized by in situ-generated difluoromethyl nitrile oxide. The (3+2) cycloaddition proceeds at room temperature, has broad functional group tolerance, and can be used for the late-stage modification of bioactive molecules (finasteride and carbamazepine). The obtained CF2H-isoxazolines can be easily transformed into CF2H-containing building blocks for medicinal chemistry: amines, amino acids, amino alcohols, and spirocyclic scaffolds.
RESUMEN
The Pauson-Khand reaction has in the past 50 years become one of the most common cycloaddition reactions in chemistry. Coupling two unsaturated bonds with carbon monoxide, the transformation remains limited to CO as a C1 building block. Herein we report analogous cycloaddition reactions with nitrenes as an N1 unit. The reaction of a nonconjugated diene with a nitrene precursor produces bicyclic bioisosteres of common saturated heterocycles such as piperidine, morpholine, and piperazine. Experimental and computational mechanistic studies support relaying of the diradical nature of triplet nitrene into the π-system. We showcase the reaction's utility in late-stage functionalization of drug compounds and discovery of soluble epoxide hydrolase inhibitors.
RESUMEN
The spiro[3.3]heptane core, with the non-coplanar exit vectors, was shown to be a saturated benzene bioisostere. This scaffold was incorporated into the anticancer drug sonidegib (instead of the meta-benzene), the anticancer drug vorinostat (instead of the phenyl ring), and the anesthetic drug benzocaine (instead of the para-benzene). The patent-free saturated analogs obtained showed a high potency in the corresponding biological assays.
Asunto(s)
Antineoplásicos , Benceno , Heptanos , Fenómenos Químicos , Antineoplásicos/farmacologíaRESUMEN
[This corrects the article DOI: 10.1039/D1SC04846E.].
RESUMEN
Bicyclo[2.1.1]hexanes have been synthesized, characterized, and biologically validated as saturated bioisosteres of the ortho-substituted benzene ring. The incorporation of the 1,2-disubstituted bicyclo[2.1.1]hexane core into the structure of fungicides boscalid (BASF), bixafen (Bayer CS), and fluxapyroxad (BASF) gave saturated patent-free analogs with high antifungal activity.
RESUMEN
The phenyl ring is a basic structural element in chemistry. Here, we show the design, synthesis, and validation of its new saturated bioisostere with improved physicochemical properties - 2-oxabicyclo[2.2.2]octane. The design of the structure is based on the analysis of the advantages and disadvantages of the previously used bioisosteres: bicyclo[1.1.1]pentane, bicyclo[2.2.2]octane, and cubane. The key synthesis step is the iodocyclization of cyclohexane-containing alkenyl alcohols with molecular iodine in acetonitrile. 2-Oxabicyclo[2.2.2]octane core is incorporated into the structure of Imatinib and Vorinostat (SAHA) drugs instead of the phenyl ring. In Imatinib, such replacement leads to improvement of physicochemical properties: increased water solubility, enhanced metabolic stability, and reduced lipophilicity. In Vorinostat, such replacement results in a new bioactive analog of the drug. This study enhances the repertoire of available saturated bioisosteres of (hetero)aromatic rings for the use in drug discovery projects.
RESUMEN
1-Azaspiro[3.3]heptanes were synthesized, characterized, and validated biologically as bioisosteres of piperidine. The key synthesis step was thermal [2+2] cycloaddition between endocyclic alkenes and the Graf isocyanate, ClO2 S-NCO, to give spirocyclic ß-lactams. Reduction of the ß-lactam ring with alane produced 1-azaspiro[3.3]heptanes. Incorporation of this core into the anesthetic drug bupivacaine instead of the piperidine fragment resulted in a new patent-free analogue with high activity.
RESUMEN
The ortho-substituted phenyl ring is a basic structural element in chemistry. It is found in more than three hundred drugs and agrochemicals. During the past decade, scientists have tried to replace the phenyl ring in bioactive compounds with saturated bioisosteres to obtain novel patentable structures. However, most of the research in this area has been devoted to the replacement of the para-substituted phenyl ring. Here we have developed saturated bioisosteres of the ortho-substituted phenyl ring with improved physicochemical properties: 2-oxabicyclo[2.1.1]hexanes. Crystallographic analysis revealed that these structures and the ortho-substituted phenyl ring indeed have similar geometric properties. Replacement of the phenyl ring in marketed agrochemicals fluxapyroxad (BASF) and boscalid (BASF) with 2-oxabicyclo[2.1.1]hexanes dramatically improved their water solubility, reduced lipophilicity and most importantly retained bioactivity. This work suggests an opportunity for chemists to replace the ortho-substituted phenyl ring in bioactive compounds with saturated bioisosteres in medicinal chemistry and agrochemistry.
RESUMEN
A general approach to 3-azabicyclo[3.1.1]heptanes by reduction of spirocyclic oxetanyl nitriles was developed. The mechanism, scope, and scalability of this transformation were studied. The core was incorporated into the structure of the antihistamine drug Rupatidine instead of the pyridine ring, which led to a dramatic improvement in physicochemical properties.
RESUMEN
Catalytic borylations of sp3 C-H bonds occur with high selectivities for primary C-H bonds or secondary C-H bonds that are activated by nearby electron-withdrawing substituents. Catalytic borylation at tertiary C-H bonds has not been observed. Here we describe a broadly applicable method for the synthesis of boron-substituted bicyclo[1.1.1]pentanes and (hetero)bicyclo[2.1.1]hexanes by an iridium-catalysed borylation of the bridgehead tertiary C-H bond. This reaction is highly selective for the formation of bridgehead boronic esters and is compatible with a broad range of functional groups (>35 examples). The method is applicable to the late-stage modification of pharmaceuticals containing this substructure and the synthesis of novel bicyclic building blocks. Kinetic and computational studies suggest that C-H bond cleavage occurs with a modest barrier and that the turnover-limiting step of this reaction is an isomerization that occurs prior to reductive elimination that forms the C-B bond.
RESUMEN
CF3-cyclopropanes with aliphatic, aromatic, and even heteroaromatic substituents were prepared on a multigram scale by deoxyfluorination of cyclopropane carboxylic acids or their salts with sulfur tetrafluoride. For labile α-pyridine acetic acids, only the use of their potassium salts allowed to obtain the needed products. Derivatization of CF3-cyclopropanes into building blocks ready for direct use in medicinal chemistry was performed.
RESUMEN
Sulfonylated aromatics are commonplace motifs in drugs and agrochemicals. However, methods for the direct synthesis of sulfonylated non-classical arene bioisosteres, which could improve the physicochemical properties of drug and agrochemical candidates, are limited. Here we report a solution to this challenge: a one-pot halosulfonylation of [1.1.1]propellane, [3.1.1]propellane and bicyclo[1.1.0]butanes that proceeds under practical, scalable and mild conditions. The sulfonyl halides used in this chemistry feature aryl, heteroaryl and alkyl substituents, and are conveniently generated in situ from readily available sulfinate salts and halogen atom sources. This methodology enables the synthesis of an array of pharmaceutically and agrochemically relevant halogen/sulfonyl-substituted bioisosteres and cyclobutanes, on up to multidecagram scale.
Asunto(s)
Butanos , Halógenos , Indicadores y Reactivos , Butanos/químicaRESUMEN
The previously unknown difluoromethyl diazirines and the previously neglected trifluoromethyl-aliphatic diazirines were synthesized and characterized. Model photolabeling experiments and biological studies showed that these compounds could indeed be used as photoaffinity labels.
Asunto(s)
Diazometano , Etiquetas de FotoafinidadRESUMEN
A useful protocol for achieving decarboxylative cross-coupling (DCC) of redox-active esters (RAE, isolated or generated in situ) and halo(hetero)arenes is reported. This pragmatically focused study employs a unique Ag-Ni electrocatalytic platform to overcome numerous limitations that have plagued this strategically powerful transformation. In its optimized form, coupling partners can be combined in a surprisingly simple way: open to the air, using technical-grade solvents, an inexpensive ligand and Ni source, and substoichiometric AgNO3, proceeding at room temperature with a simple commercial potentiostat. Most importantly, all of the results are placed into context by benchmarking with state-of-the-art methods. Applications are presented that simplify synthesis and rapidly enable access to challenging chemical space. Finally, adaptation to multiple scale regimes, ranging from parallel milligram-based synthesis to decagram recirculating flow is presented.
Asunto(s)
Ésteres , Catálisis , Ligandos , Oxidación-Reducción , SolventesRESUMEN
Many oxetane-carboxylic acids were found to be unstable. They easily isomerized into new (hetero)cyclic lactones while being stored at room temperature or slightly heated. Chemists should keep in mind the high instability of these molecules, as this could dramatically affect the reaction yields and lead to negative results (especially in those reactions that require heating).
Asunto(s)
Ácidos Carboxílicos , Éteres Cíclicos , Isomerismo , LactonasRESUMEN
After more than 20â years of trials, a practical scalable approach to fluoro-substituted bicyclo[1.1.1]pentanes (F-BCPs) has been developed. The physicochemical properties of the F-BCPs have been studied, and the core was incorporated into the structure of the anti-inflammatory drug Flurbiprofen in place of the fluorophenyl ring.