Optimization of graphene polypyrrole for enhanced adsorption of moxifloxacin antibiotic: an experimental design approach and isotherm investigation.

The presence of antibiotics in water systems had raised a concern about their potential harm to the aquatic environment and human health as well as the possible development of antibiotic resistance. Herein, this study investigates the power of adsorption using graphene-polypyrrole (GRP-PPY) nanoparticles as a promising approach for the removal of Moxifloxacin HCl (MXF) as a model antibiotic drug. GRP-PPY nanoparticles synthesis was performed with a simple and profitable method, leading to the formation of high surface area particles with excellent adsorption properties. Characterization was assessed with various techniques, including Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET). Box-Behnken experimental design was developed to optimize the adsorption process. Critical parameters such as initial antibiotic concentration, nanoparticle concentration, and pH were investigated. The Freundlich isotherm model provided a good fit to the experimental data, indicating multilayer adsorption of MXF onto the GRP-PPY-NP. As a result, a high adsorption capacity of MXF (92%) was obtained in an optimum condition of preparing 30 µg/mL of the drug to be adsorbed by 1 mg/mL of GRP-PPY-NP in pH 9 within 1 h in a room temperature. Moreover, the regeneration and reusability of GRP-PPY-NP were investigated. They could be effectively regenerated for 3 cycles using appropriate desorption agents without significant loss in adsorption capacity. Overall, this study highlights the power of GRP-PPY-NP as a highly efficient adsorbent for the removal of MXF from wastewater as it is the first time to use this NP for a pharmaceutical product which shows the study's novelty, and the findings provide valuable insights into the development of sustainable and effective wastewater treatment technologies for combating antibiotic contamination in aquatic environments.

Development of Response Surface Approach for Determination of Paracetamol, Chlorpheniramine Maleate, Caffeine and Ascorbic Acid by Green HPLC Method: A Desirability-Based Optimization.

Design of experiment is an efficient and cost-effective tool to optimize the chromatographic separation of a multicomponent mixture. The central composite design was conducted to develop and optimize a green high performance liquid chromatography (HPLC) method for simultaneous quantitation of a quaternary mixture of paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid in their pharmaceutical dosage form as well as the determination of their dissolution profile. A five-level three-factor model was performed to investigate the effect of mobile phase composition, pH and flow rate on enhanced resolution and short run time. Analysis was performed using a Kinitex EVO C18 column and a mobile phase composed of methanol: 0.02 M phosphate buffer pH 3.3 (34:66, v/v) at 1.0 mL/min using photodiode array detection. Optimum chromatographic separation was achieved in <6 min with a desirability of 0.999. Linearity was achieved over a range of 1.00-300.00, 1.00-50.00, 2.00-50.00 and 2.00-100.00 µg/mL for paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid, respectively, with a limit of detection (<0.1 µg/mL). The greenness profile was evaluated using the analytical eco-scale and Analytical GREEnness Metric Approach with values of 81 and 0.77, respectively.

Application of smart chemometric models for spectra resolution and determination of challenging multi-action quaternary mixture: statistical comparison with greenness assessment.

A multivariate spectrophotometric method is a potential approach that enables discrimination of spectra of components in complex matrices (e.g., pharmaceutical formulation) serving as a substitution method for chromatography. Four green smart multivariate spectrophotometric models were proposed and validated, including principal component regression (PCR), partial least-squares (PLS), multivariate curve resolution-alternating least squares (MCR-ALS), and artificial neural networks (ANN). The developed chemometric models were compared to resolve highly overlapping spectra of Paracetamol (PARA), Chlorpheniramine maleate (CPM), Caffeine (CAF), and Ascorbic acid (ASC). The four multivariate calibration models were assessed via recoveries percent, and root mean square error of prediction. Hence, the proposed models were efficiently applied with no need for any preliminary separation step. The models were utilized to analyze the studied components in their combined pharmaceutical formulation (Grippostad® C capsules). Analytical GREEnness Metric Approach (AGREE) and eco-scale tools were applied to assess the greenness of the established models and found to be 0.77 and 85, respectively. Moreover, the proposed models have been compared to official ones showing no considerable variations in accuracy and precision. Therefore, these models can be highly advantageous for conducting standard pharmaceutical analysis of the substances researched within product testing laboratories.

A probe of new molecularly imprinted solid-phase extraction coupled with HPLC-DAD and atomic absorption spectrophotometry for quantification of tetracycline HCl, metronidazole and bismuth subcitrate in combination with their official impurities: Application in dosage form and human plasma.

The integration of molecular imprinting technique with chromatographic one has a great impact on the assay's selectivity and sensitivity. Herein, a molecularly imprinted solid-phase extraction associated with high performance liquid chromatography (MISPE-HPLC) was employed for simultaneous determination of the co-formulated drugs; tetracycline hydrochloride (TET) and metronidazole (MET), in plasma and in their anti-H-pylori drug for the first time. Two sorts of molecularly imprinted polymers (MIPs) were fabricated using TET and MET as the template molecules, while ethylene glycol dimethacrylate and methacrylic acid were used as a cross-linker and a monomer, respectively. The synthesized MIPs were identified using different techniques. The adsorption-desorption capability of each template was investigated towards its corresponding MIP. The extraction conditions of MISPE was optimized with respect to TET/MIP and MET/MIP sorbent. Bismuth subcitrate (BSC), the third co-formulated drug was analyzed in spiked human plasma using an atomic absorption spectrometric (AAS) method. The performance of the developed methods was assured as per ICH guidelines for analyzing the studied drugs in their pharmaceutical dosage form along with two of their official impurities. In addition, bioanalytical method validation was conducted where linearity was achieved at 2.0-40.0 µg mL-1, 2.0-40.0 µg mL-1 and 5.0-80.0 µg mL-1 for TET, MET and BSC, respectively.

Smartphone based colorimetric point-of-care sensor for abused drugs: case of baclofen determination in urine.

As a GABA-ß receptor agonist, the central muscle relaxant Baclofen (BAC) has a potential of abuse. Unfortunately, the sense of wellbeing and pleasure is obtained at very high BAC doses. This is associated with many life-threating or even fatal cases due to neurological and respiratory failures. Moreover, having narrow therapeutic index makes BAC a high-risk drug. This is potentiated in case of long-treatment regimen or off-label use in smoking and alcohol cessation protocols. Until now, there is no rapid diagnostic test available for BAC screening. Therefore; It is quite difficult to routinely monitor cases on BAC regimen. On the other hand, smartphone-based colorimetric point of care testing (POCT) is displacing conventional analytical approaches in the detection and assay of abused drugs as well as therapeutic drug monitoring. It offers on-site, rapid, easy, affordable and interpretable analysis. Incorporating smartphone as a portable device facilitates its application, especially in remote areas and low-income countries. For the first time, the current work presents a smartphone-based colorimetric POCT for BAC analysis in urine without interference from urine matrix. It depends on BAC reaction with naphthoquinone sulfonate (NQS) in highly alkaline aqueous medium. The developed color was captured in a customized photo box using smartphone camera. Then, intensity of the blue channel was measured by a software application "Color Analyzer". All parameters were optimized with respect to the colorimetric reaction, photographing and smartphone-based analysis. All parameters were successfully investigated according to FDA guidelines for bioanalytical method validation. Also, all POCT criteria were considered as per WHO requirements. This method could determine BAC, linearly, from 0.02 to 0.21 mmol L-1 in urine. Moreover, LLOQ was lower than the expected BAC therapeutic concentrations in urine. The proposed method proved high reliability and suitability to analyze BAC in urine. This strongly recommends its routine application in screening BAC abusers and BAC therapeutic monitoring.

Design of screen-printed potentiometric platform for sensitive determination of mirabegron in spiked human plasma; molecular docking and transducer optimization.

The integration of molecular modelling simulation and electrochemical sensors is of high interest. Herein, for the first time, a portable solid-contact potentiometric electrode was designed for the sensitive determination of mirabegron (MIR) in human plasma and pharmaceutical formulation. A two-step optimization protocol was investigated for the fabrication of an ion on sensing polymeric membrane. First, molecular docking was used for optimum ionophore selection. Calix[6]arene showed the highest affinity towards MIR with a better docking score (-4.35) and potential energy (-65.23) compared to other calixarene derivatives. Second, carbon nanotubes and gold nanoparticles were investigated as ion-electron transducers using a drop-casting procedure. Gold nanoparticle-based sensors showed better slope, potential stability, and rapid response compared to carbon nanotubes. The proposed solid contact sensors (V-VII) showed comparable sensitivity and ease of handling compared to liquid contact sensors (I-IV). The optimized gold nanoparticles sensor VII produced a Nernstian response over the range of 9.77 × 10-7 to 1 × 10-3 M with LOD of 2.4 × 10-7 M. It has also been used to determine MIR in its pharmaceutical formulation in the presence of a co-formulated antioxidant butylated hydroxytoluene and spiked human plasma. This would offer a feasible and economic platform for monitoring MIR in pharmaceutical preparation and biological fluids.

Spectrum subtraction as a complementary method for six resolution techniques resolving overlapping spectra; application to multicomponent veterinary formulation with greenness and whiteness assessment.

Mathematical filtration is an efficient tool to resolve the overlapping spectra of binary mixtures in zero or first order form. Herein, a comparative study was conducted between six economic, accurate and precise spectrophotometric methods for determination of Triclabendazole (TCB) and Levamisole HCl (LVM). Each component was resolved with minimum mathematical steps in its zero-order absorption spectrum by ratio subtraction, constant multiplication, and the recent factorized response method; coupled with spectrum subtraction. In addition, the mixture was resolved in its first derivative form by derivative subtraction, D1 constant multiplication, and the recent D1 factorized response method; coupled with spectrum subtraction. Results obtained were also compared to those obtained from constant value, concentration value, and derivative ratio methods. The linearity range was found to be either 1.0-10.0 µg/mL or 2.0-20.0 µg/mL for TCB, and 2.0-14.0 µg/mL for LVM with LOD of 0.08 µg/mL and 0.19 µg/mL, respectively. Validation of the proposed methods was performed according to VICH guidelines. Results obtained from the statistical data showed no significant difference regarding accuracy and precision compared to the reported methods. The developed spectrophotometric methods followed the principles of green analytical chemistry, in which the green assessment was done through four tools, called, National Environmental Methods Index (NEMI), Analytical Eco-Scale (AES), Green Analytical Procedure Index (GAPI) and Analytical greenness metric (AGREE). Also, a white assessment was performed using RGB model. The proposed methods could offer an economic alternative for the routine analysis of bulk materials and combined veterinary dosage form.

Novel eco-friendly spectrophotometric approaches for resolution of fixed dose formulation of phenylbutazone with minor component of dexamethasone: Greenness assessment by AGREE tool.

Spectrophotometric resolution of severely overlapped binary mixtures with minor component is challenging. Herein, coupling of mathematical manipulation steps with sample enrichment was conducted on the binary mixture spectrum of Phenylbutazone (PBZ) and Dexamethasone sodium phosphate (DEX) to resolve, for the first time each component separately. Simultaneous determination of both components in a mixture ratio of 1:0.002 was achieved in their zero or first order spectra by the recent factorized response method along with ratio subtraction and constant multiplication methods; all coupled with spectrum subtraction. In addition, a novel second derivative concentration value and second derivative constant value methods were developed for PBZ determination. The concentration of the minor component DEX was obtained, without preliminary separation steps by derivative ratio after sample enrichment by either spectrum addition or standard addition. Spectrum addition approach showed superior characteristics compared to standard addition technique. All proposed methods were placed through a comparative study. Linear correlation was found to be 1.5-18.0 µg/mL for PBZ, and 4.0-45.0 µg/mL for DEX. The proposed methods were validated in accordance with ICH guidelines. The greenness assessment of the proposed spectrophotometric methods was evaluated by AGREE software. Results obtained from the statistical data were evaluated by comparing to one another as well as the official USP methods. These methods offer a cost and time effective platform to analyze bulk materials and combined veterinary formulation.

Functionalized SnO2 nanoparticles with gallic acid via green chemical approach for enhanced photocatalytic degradation of citalopram: synthesis, characterization and application to pharmaceutical wastewater treatment.

Eco-friendly stannic oxide nanoparticles functionalized with gallic acid (SnO2/GA NP) were synthesized and employed as a novel photocatalyst for the degradation of citalopram, a commonly prescribed antidepressant drug. SnO2/GA NP were characterized using high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, Brunauer-Emmett-Teller measurements and X-ray diffraction. A validated RP-HPLC assay was developed to monitor citalopram concentration in the presence of its degradation products. Full factorial design (24) was conducted to investigate the effect of irradiation time, pH, SnO2/GA NP loading and initial citalopram concentration on the efficiency of the photodegradation process. Citalopram initial concentration was found to be the most significant parameter followed by irradiation time and pH, respectively. At optimum conditions, 88.43 ± 0.7% degradation of citalopram (25.00 µg/mL) was obtained in 1 h using UV light (1.01 mW/cm2). Citalopram kinetics of degradation followed pseudo-first order rate with Kobs and t0.5 of - 0.037 min-1 and 18.73 min, respectively. The optimized protocol was successfully applied for treatment of water samples collected during different cleaning validation cycles of citalopram production lines. The reusability of SnO2/GA NP was studied for 3 cycles without significant loss in activity. This approach would provide a green and economic alternative for pharmaceutical wastewater treatment of organic pollutants.

High performance anion exchange chromatographic and colorimetric methods for quality assessment of total and free polysaccharide content in Haemophilus influenzae type b conjugate vaccine containing lactose.

The presence of lactose as a stabilizer in Haemophilus influenzae type b (Hib) conjugate vaccine is a challenge for chromatographic resolution of its total and free poly ribosyl ribitol phosphate (PRP) content. Sample pretreatment using ultrafiltration was performed and had removed ≥95% of lactose in shorter time compared to the conventional dialysis process. Separation of free unconjugated PRP was performed using solid-phase extraction C4 cartridges. Hib conjugate vaccine was then analyzed for determination of total and free PRP, using two validated techniques: high performance anion exchange chromatography with pulsed amperometry (HPAEC-PAD) for ribitol determination and a colorimetric assay for phosphorus determination. Lactose removal had enabled a rapid chromatographic assay via fast depolymerization of PRP using high temperature treatment. Modifying the burning process in the colorimetric assay reduced the analysis time significantly compared to the pharmacopoeial method. Linearity was obtained over the range of 0.10-10.0 µg mL-1 for the HPAEC method and in the range of 1.0-8.0 µg mL-1 for the colorimetric one. Stability of Hib conjugate vaccine was investigated. The HPAEC results revealed about a 35% increase in free PRP content after storage under stressed conditions (moisture and temperature). The proposed methods offered a reliable and economic platform for assessing the immunogenicity, efficacy and stability of Hib conjugate vaccine containing lactose for the biopharmaceutical industry.

Molecular size distribution assessment of Haemophilus influenzae vaccine containing lactose by HPAEC-PAD and colorimetric assays.

Molecular size distribution of Haemophilus influenzae type b (Hib) conjugate vaccine is an important indicator for its immunogenicity and stability. Molecular size distribution was evaluated by High-Performance Protein Chromatography on Sepharose CL-4B column, and fractions were pooled. The use of high flow rate, incorporation of a calibration standard with the injected buffer and pooling method yielded a superior assay compared to conventional pharmacopeial method. The pools were analyzed for determination of distribution coefficient (KD) of 0.2 and 0.5 using two validated techniques: High Performance Anion Exchange Chromatography with pulsed amperometric detection (HPAEC-PAD) for ribitol determination and an optimized colorimetric assay for phosphorus determination. Linearity was achieved over range of 0.10-10.0 µg/mL and 1.0-8.0 µg/mL with LOD of 0.03 and 0.28 µg/mL for HPAEC and colorimetric assays, respectively. The developed assays were successfully applied in quality control monitoring of Hib conjugate vaccine. The optimized colorimetric method had shortened the analysis time to 25 min compared to 3.5 h for the European pharmacopeial assay by modifying the burning process. HPAEC stability results revealed 40% decrease in MSD after stressed storage conditions. The proposed assays offer a reliable and economic platform for monitoring the quality attributes of Hib for biopharma industry.

Facile imprinted polymer for label-free highly selective potentiometric sensing of proteins: case of recombinant human erythropoietin.

In the current study, a molecularly imprinted polymer (MIP)-based potentiometric sensor was fabricated for a label-free determination of recombinant human erythropoietin (rhEPO). The MIP sensor was operated under zero current conditions using tetra-butyl ammonium bromide as a marker ion. A highly ordered rhEPO surface imprinted layer was prepared using 3-aminopropyl triethoxysilane and tetraethoxysilane as a monomer and cross-linker, respectively, under mild reaction conditions. A two-fold increase in the signal output was obtained by polymeric surface minimization (0.5 mm) that allowed more pronounced molecular recognition (imprinting factor = 20.1). The proportion of cross-reactivity was examined using different interfering biomolecules. Results confirmed sensor specificity for both structurally related and unrelated proteins. An ~40% decrease in the response was obtained for rhEPO-ß compared to rhEPO-α. The imprinted polymeric surface was evaluated using scanning electron microscopy and Fourier transform infrared spectroscopy. Under the optimal measurement conditions, a linear range of 10.00-1000.00 ng mL-1 (10-10 - 10-8 M) was obtained. The sensor was employed for the determination of rhEPO in different biopharmaceutical formulations. Results were validated against standard immunoassay. Spiked human serum samples were analyzed and the assay was validated. The presence of non-specific proteins did not significantly affect (~8%) the results of our assay. A concentration-dependent linear response was produced in an identical range with detection limit as low as 6.50 ng mL-1 (2.14 × 10-10 M). The facile fabricated MIP sensor offers a cost-effective, portable, and easy to use alternative for biosimilarity assessment and clinical application.

Label-Free Potentiometric Ion Flux Immunosensor for Determination of Recombinant Human Myelin Basic Protein: Application to Downstream Purification from Transgenic Milk.

Recombinant human myelin basic protein (rhMBP) produced in the milk of transgenic cows was found exclusively associated with milk caseins. This hindered its direct determination without extensive sample pretreatment. Here, a label-free potentiometric immunosensor was developed and validated for the determination of rhMBP. An ion flux was generated under zero-current based on surface blocking of the polymeric membrane ion-selective electrode by anti-hMBP antibody and tetrabutylammonium bromide as a marker ion. The immunosensor was successfully employed in the quantitative determination of hMBP in the range of 0.10-20.00 µg/mL with a limit of detection of 50.00 ng/mL. The applicability of the passive ion flux immunosensor for determination of target analyte in complex matrices was investigated. Downstream purification of rhMBP from the milk of transgenic cows was achieved using cation exchange chromatography, immobilized metal affinity chromatography, and immunoaffinity chromatography. The specificity of the immunosensor along with matrix effect of milk proteins were demonstrated. Results obtained using the rhMBP immunosensor were further cross-validated using an orthogonal testing protocol assembled of RP-HPLC and SE-HPLC. It should be noted that the proposed ion flux immunosensor provided a feasible and specific tool for monitoring rhMBP concentration/purity, immunogenic activity, and stability. Such approach provides an attractive economic alternative to sophisticated biosensors required for in-process quality control of biopharmaceutical products.

Optimization of photocatalytic degradation of meloxicam using titanium dioxide nanoparticles: application to pharmaceutical wastewater analysis, treatment, and cleaning validation.

Meloxicam is a commonly prescribed nonsteroidal anti-inflammatory drug with analgesic and fever-reducing effects. In this study, photocatalytic degradation of meloxicam in the presence of TiO2 nanoparticles (TiO2NP) was optimized and applied for pharmaceutical wastewater treatment. A validated stability-indicating orthogonal testing protocol (reversed-phase (RP)-HPLC and capillary zone electrophoresis) was developed and validated for monitoring of meloxicam concentration in the presence of its photodegradation products. Fractional factorial design was employed in order to investigate the effects of pH, irradiation time, UV light intensity, TiO2NP loading, and initial meloxicam concentration on the efficiency of the process. The light intensity was found as the most significant parameter followed by irradiation time and concentration, respectively. The most influencing interactions were noted between irradiation time-concentration and irradiation time-light intensity. The kinetics of meloxicam degradation was investigated at the optimum set of experimental conditions. The protocol was successfully applied for treatment of incurred water samples collected during various cleaning validation cycles. A percentage degradation of 77.34 ± 0.02 % was achieved upon irradiation of samples containing 64.57 ± 0.09 µg/mL with UV light (1012 µW/cm(2), 8 h) in the presence of 0.4 mg/mL TiO2NP at pH 9.0 ± 0.05. Treatment of wastewaters collected during the cleaning validation of each product separately rather than the combined waste should result in a significant improvement in the economics of pharmaceutical wastewater treatment. This could be attributed to the relatively small waste volumes and the ability to tailor the experimental conditions to achieve maximum efficiency.