A review on gold nanoparticles as an innovative therapeutic cue in bone tissue engineering: Prospects and future clinical applications.

Bone damage is a complex orthopedic problem primarily caused by trauma, cancer, or bacterial infection of bone tissue. Clinical care management for bone damage remains a significant clinical challenge and there is a growing need for more advanced bone therapy options. Nanotechnology has been widely explored in the field of orthopedic therapy for the treatment of a severe bone disease. Among nanomaterials, gold nanoparticles (GNPs) along with other biomaterials are emerging as a new paradigm for treatment with excellent potential for bone tissue engineering and regenerative medicine applications. In recent years, a great deal of research has focused on demonstrating the potential for GNPs to provide for enhancement of osteogenesis, reduction of osteoclastogenesis/osteomyelitis, and treatment of bone cancer. This review details the latest understandings in regards to GNPs based therapeutic systems, mechanisms, and the applications of GNPs against various bone disorders. The present review aims to summarize i) the mechanisms of GNPs in bone tissue remodeling, ii) preparation methods of GNPs, and iii) functionalization of GNPs and its decoration on biomaterials as a delivery vehicle in a specific bone tissue engineering for future clinical application.

Development of a Temperature-Responsive Hydrogel Incorporating PVA into NIPAAm for Controllable Drug Release in Skin Regeneration.

Melanoma, a highly malignant and aggressive form of skin cancer, poses a significant global health threat, with limited treatment options and potential side effects. In this study, we developed a temperature-responsive hydrogel for skin regeneration with a controllable drug release. The hydrogel was fabricated using an interpenetrating polymer network (IPN) of N-isopropylacrylamide (NIPAAm) and poly(vinyl alcohol) (PVA). PVA was chosen for its adhesive properties, biocompatibility, and ability to address hydrophobicity issues associated with NIPAAm. The hydrogel was loaded with doxorubicin (DOX), an anticancer drug, for the treatment of melanoma. The NIPAAm-PVA (N-P) hydrogel demonstrated temperature-responsive behavior with a lower critical solution temperature (LCST) around 34 °C. The addition of PVA led to increased porosity and faster drug release. In vitro biocompatibility tests showed nontoxicity and supported cell proliferation. The N-P hydrogel exhibited effective anticancer effects on melanoma cells due to its rapid drug release behavior. This N-P hydrogel system shows great promise for controlled drug delivery and potential applications in skin regeneration and cancer treatment. Further research, including in vivo studies, will be essential to advance this hydrogel system toward clinical translation and impactful advancements in regenerative medicine and cancer therapeutics.

Development of a plasma-based 3D printing system for enhancing the biocompatibility of 3D scaffold.

Fused deposition modeling (FDM) is a three-dimensional (3D) printing technology typically used in tissue engineering. However, 3D-printed row scaffolds manufactured using material extrusion techniques have low cell affinity on the surface and an insufficient biocompatible environment for desirable tissue regeneration. Thus, in this study, plasma treatment was used to render surface modification for enhancing the biocompatibility of 3D-printed scaffolds. We designed a plasma-based 3D printing system with dual heads comprising a plasma device and a regular 3D FDM printer head for a layer-by-layer nitrogen plasma treatment. Accordingly, the wettability, roughness, and protein adsorption capability of the 3D-printed scaffold significantly increased with the plasma treatment time. Hence, the layer-by-layer plasma-treated (LBLT) scaffold exhibited significantly enhanced cell adhesion and proliferation in anin vitroassay. Furthermore, the LBLT scaffold demonstrated a higher tissue infiltration and lower collagen encapsulation than those demonstrated by a non-plasma-treated scaffold in anin vivoassay. Our approach has great potential for various tissue-engineering applications via the adjustment of gas or precursor levels. In particular, this system can fabricate scaffolds capable of holding a biocompatible surface on an entire 3D-printed strut. Thus, our one-step 3D printing approach is a promising platform to overcome the limitations of current biocompatible 3D scaffold engineering.

The Effectiveness of Compartmentalized Bone Graft Sponges Made Using Complementary Bone Graft Materials and Succinylated Chitosan Hydrogels.

Bone defects can occur from many causes, including disease or trauma. Bone graft materials (BGMs) have been used to fill damaged areas for the reconstruction of diseased bone tissues since they are cost effective and readily available. However, BGMs quickly disperse around the tissue area, which ultimately leads to it migrating away from the defect after transplantation. We tested chitosan hydrogels as a useful carrier to hold BGMs in the transplantation area. In this study, we synthesized succinylated chitosan (SCS)-based hydrogels with a high decomposition rate and excellent biocompatibility. We confirmed that BGMs were well distributed inside the SCS hydrogel. The SCS-B hydrogel showed a decrease in mechanical properties, such as compressive strength and Young's modulus, as the succinylation rate increased. SCS-B hydrogels also exhibited a high cell growth rate and bone differentiation rate. Moreover, the in vivo results showed that the SCS hydrogel resorbed into the surrounding tissues while maintaining the BGMs in the transplantation area for up to 6 weeks. These data support the idea that SCS hydrogel can be useful as a bioactive drug carrier for a broad range of biomedical applications.

Facile Preparation of ß-Cyclodextrin-grafted Chitosan Electrospun Nanofibrous Scaffolds as a Hydrophobic Drug Delivery Vehicle for Tissue Engineering Applications.

Despite advances in the bio-tissue engineering area, the technical basis to directly load hydrophobic drugs on chitosan (CTS) electrospun nanofibers (ENs) has not yet been fully established. In this study, we fabricated CTS ENs by using an electrospinning (ELSP) system, followed by surface modification using succinyl-beta-cyclodextrin (ß-CD) under mild conditions. The ß-CD-modified CTS (ßCTS) ENs had slightly increased hydrophobicity compared to pristine CTS ENs as well as decreased residual amine content on the surface. Through FTIR spectroscopy and thermogravimetric analysis (TGA), we characterized the surface treatment physiochemically. In the drug release test, we demonstrated the stable and sustained release of a hydrophobic drug (e.g., dexamethasone) loaded on ß-CD ENs. During in vitro biocompatibility assessments, the grafting of ß-CD was shown to not reduce cell viability compared to pristine CTS ENs. Additionally, cells proliferated well on ß-CD ENs, and this was confirmed by F-actin fluorescence staining. Overall, the material and strategies developed in this study have the potential to load a wide array of hydrophobic drugs. This could be applied as a drug carrier for a broad range of tissue engineering applications.

Development of photo-crosslinkable platelet lysate-based hydrogels for 3D printing and tissue engineering.

Three-dimensional (3D) printing shows potential for use as an advanced technology for forming biomimetic tissue and other complex structures. However, there are limits and restrictions on selection of conventional bioinks. Here we report the first 3D-printable platelet lysate (PLMA)-based hydrogel, which consists of platelet lysate from whole blood of humans that can simulate the 3D structure of tissues and can be formed into a crosslinked hydrogel layer-by-layer to build cell-laden hydrogel constructs through methacrylated photo-polymerization. Furthermore, it can be customized for use with various tissues by controlling the physical properties according to irradiation time and concentration. In particular, different cells can be mixed and printed, and the integrity of the 3D printed structure can maintain its shape after crosslinking. The bio-ink exhibits excellent cell diffusion and proliferation at low concentrations, which improves moldability and biocompatibility. The 3D-printable PLMA bioinks may constitute a new strategy to create customized microenvironments for the repair of various tissuesin vivousing materials derived from the human body.

Injectable Hydrogel Containing Tauroursodeoxycholic Acid for Anti-neuroinflammatory Therapy After Spinal Cord Injury in Rats.

We investigate the anti-inflammatory effects of injectable hydrogel containing tauroursodeoxycholic acid (TUDCA) in a spinal cord injury (SCI) model. To this end, TUDCA-hydrogel (TC gel) is created by immersing the synthesized hydrogel in a TUDCA solution for 1 h. A mechanical SCI was imposed on rats, after which we injected the TC gel. After the SCI and injections, motor functions and lesions were significantly improved in the TC gel group compared with those in the saline group. The TC gel significantly decreased pro-inflammatory cytokine levels compared with the saline; TUDCA and glycol chitosan-oxidized hyaluronate were mixed at a ratio of 9:1 (CHA) gel independently. In addition, the TC gel significantly suppressed the phosphorylation of extracellular signal-regulated kinase (p-ERK) and c-Jun N-terminal kinase (p-JNK) in the mitogen-activated protein kinase (MAPK) pathway compared with the saline, TUDCA, and CHA gel independently. It also decreased tumor necrosis factor-α (TNF-α) and glial fibrillary acidic protein (GFAP), inflammatory marker, at the injured sites more than those in the saline, TUDCA, and CHA gel groups. In conclusion, the results of this study demonstrate the neuroinflammatory inhibition effects of TC gel in SCI and suggest that TC gel can be an alternative drug system for SCI cases.

Emerging Potential of Exosomes in Regenerative Medicine for Temporomandibular Joint Osteoarthritis.

Exosomes are nanosized vesicles (30-140 nm) of endocytic origin that play important roles in regenerative medicine. They are derived from cell membranes during endocytic internalization and stabilize in biological fluids such as blood and synovia. Temporomandibular joint osteoarthritis (TMJ OA) is a degenerative disease, which, in addition to chronic pain, is characterized by progressive cartilage breakdown, condylar bone remodeling, and synovitis. However, traditional clinical treatments have limited symptom- and structure-modifying effects to restore damaged cartilage and other TMJ tissues. This is due to the limited self-healing capacity of condylar cartilage. Recently, stem-cell-derived exosomes have been studied as an alternative therapeutic approach to tissue repair and regeneration. It is known that trophic regulation of mesenchymal stem cells (MSCs) has anti-inflammatory and immunomodulatory effects under pathological conditions, and research on MSC-derived exosomes is rapidly accumulating. MSC-derived exosomes mimic the major therapeutic effects of MSCs. They affect the activity of immune effector cells and possess multilineage differentiation potential, including chondrogenic and osteogenic differentiation. Furthermore, exosomes are capable of regenerating cartilage or osseous compartments and restoring injured tissues and can treat dysfunction and pain caused by TMJ OA. In this review, we looked at the uniqueness of TMJ, the pathogenesis of TMJ OA, and the potential role of MSC-derived exosomes for TMJ cartilage and bone regeneration.

Vitamin D-conjugated gold nanoparticles as functional carriers to enhancing osteogenic differentiation.

In an aging society, bone disorders such as osteopenia, osteoporosis, and degenerative arthritis cause serious public health problems. In order to solve these problems, researchers continue to develop therapeutic agents, increase the efficacy of developed therapeutic agents, and reduce side effects. Gold nanoparticles (GNPs) are widely used in tissue engineering applications as biosensors, drug delivery carriers, and bioactive materials. Their special surface property enables easy conjugation with ligands including functional groups such as thiols, phosphines, and amines. This creates an attractive advantage to GNPs for use in the bone tissue engineering field. However, GNPs alone are limited in their biological effects. In this study, we used thiol-PEG-vitamin D (SPVD) to conjugate vitamin D, an essential nutrient critical for maintaining normal skeletal homeostasis, to GNPs. To characterize vitamin D-conjugated GNPs (VGNPs), field emission transmission electron microscopy, energy dispersive X-ray spectroscopy, dynamic light scattering, and ultraviolet/visible absorption analysis were carried out. The developed VGNPs were well bound through the thiol groups between GNPs and vitamin D, and were fabricated in size of 60 nm. Moreover, to demonstrate VGNPs osteogenic differentiation effect, various assays were carried out through cell viability test, alkaline phosphatase assay, calcium deposition assay, real-time polymerase chain reaction, and immunofluorescence staining. As a result, the fabricated VGNPs were found to effectively enhance osteogenic differentiation of human adipose-derived stem cells (hADSCs) in vitro. Based on these results, VGNPs can be utilized as functional nanomaterials for bone regeneration in the tissue engineering field.

Development of a three-dimensionally printed scaffold grafted with bone forming peptide-1 for enhanced bone regeneration with in vitro and in vivo evaluations.

Defects in bone are some of the most difficult injuries to treat. Biomimetic scaffolds represent a promising approach for successful bone tissue regeneration. In this study, a three-dimensional (3D) scaffold with osteo-inductive functionality was designed and assayed both in-vitro and in-vivo. Bone formation peptide-1 (BFP1), an osteo-promoting specific peptide, was covalently bound to a 3D printed polycaprolactone (PCL) scaffold using polydopamine (DOPA). The amount of BFP1 immobilized on the surface was found to increase depending on the BFP1 concentration of the loading solution. To observe the biological effects of the 3D scaffolds, human tonsil-derived mesenchymal stem cells (hTMSCs) were isolated. The cells were cultured on the scaffolds and observed to rapidly differentiate into osteoblast-like cells with osteo-promoting capabilities. The scaffolds were implanted in a rabbit calvarial defect model for 8 weeks and successfully stimulated both vessel and bone regeneration. Osteo-promoting 3D scaffolds may provide a safer and more efficient approach for bone repair and remodelling in regenerative medicine.

Vascular endothelial growth factor immobilized on mussel-inspired three-dimensional bilayered scaffold for artificial vascular graft application: In vitro and in vivo evaluations.

Currently, there is a great clinical demand for biocompatible and robust tissue-engineered tubular scaffolds for use as artificial vascular graft materials. Despite considerable research on vascular scaffolds, there has still been only limited development of scaffold materials possessing both sufficient mechanical strengths and biological effects for vascular application. In this work, we designed a mechanically robust, bilayered scaffold and manufactured it by combining electrospinning (ELSP) and three-dimensional (3D) printing techniques. This material was coated with polydopamine (PDA) and vascular endothelial growth factor (VEGF) was grafted directly on the scaffold surface to induce potent angiogenic activity. We confirmed that the coated-PDA layer was evenly deposited on the bare polycaprolactone (PCL) scaffold and could enable abundant VEGF immobilization with enhanced hydrophilicity. The VEGF immobilized porous tubular scaffold was well prepared without mechanical weakness induced by surface modification steps. During in vitro and in vivo testing, VEGF immobilized scaffolds elicited markedly enhanced vascular cell proliferation and angiogenic differentiation, as compared to non-treated groups. These results demonstrate that the developed scaffolds may represent an innovative paradigm in vascular tissue engineering by inducing angiogenesis as a means of remodeling and healing vascular defects for use in restorative procedures.