Lead-Free Piezoelectric Energy Harvester Based on 2D Bismuth Titanate.

The use of two-dimensional (2D) layered materials with a noncentrosymmetric structure dramatically increases the potential of nanoscale electromechanical systems and electronic devices. In this work, liquid-phase exfoliation of bulk bismuth titanate was employed to synthesize atomically thin 2D sheets and fabricate a high-performance piezoelectric energy harvester. The structural and morphological properties of the 2D sheets were analyzed, confirming their phase purity and layer formation. Piezoelectric properties of the 2D sheets were evaluated using Piezoresponse Force Microscopy (PFM), demonstrating a high d33 piezoelectric coefficient of 40 pm/V in a few-layer bismuth titanate nanosheet. A prototype energy harvesting device was fabricated with 2D bismuth titanate as the active material. The piezoelectric response of the fabricated device was recorded at different frequencies and forces, which yielded a maximum d33 of 57.8 pC/N at 1 Hz. Such a solid electromechanical performance at a relatively infinitesimal input response indicates that 2D bismuth titanate can be useful for piezoelectric energy harvesting applications.

Development of PEGylated Cu nanoclusters: A nontoxic, multifunctional colloidal system for bioimaging and peroxide sensing.

This study introduces the development of blue-emitting colloidal Cu NCs through a novel and easy PEGylation method using different functional groups, including -SH and -COOH. The surface functionalization controls the size, cellular toxicity, and emission properties of Cu NCs. The combination of PEG, thiol, and carboxylic groups protects the particle surface from aggregation and oxidation. Among the samples, CAGP (Surface modified Cu NCs with -SH-COOH-PEG combination) emerges as an amazing candidate with the lowest toxicity and enhanced blue emission properties. The bright blue fluorescence emission from Hela cells after treatment with CAGP demonstrated this property. It also has excellent peroxide sensing potential, with a detection limit of 1.4 µM. Because of their excellent bioimaging and peroxide sensing properties, these Cu NCs could be a promising candidate for cellular oxidative stress sensing applications with high clinical relevance.

Development of a paper printed colorimetric sensor based on Cu-Curcumin nanoparticles for evolving point-of-care clinical diagnosis of sodium.

The homeostatic control of Sodium (Na+) ion in the human body assumes paramount relevance owing to its physiological importance. Any deviation from the normal level causes serious health problems like hypernatremia, hyponatremia, stroke, kidney problems etc. Therefore, quantification of Na+ levels in body fluids has significant diagnostic and prognostic importance. However, interfering ions like Potassium ion (K+) is the major hurdle in sodium detection. In this work, we synthesized the clusters of 3-9 nm-sized highly stable and pure Copper nanoparticles surface functionalised with curcumin, through chemical reduction method. Each cluster of particles is encapsulated in a curcumin layer which is clearly visible in TEM images. The results show that these curcumin functionalized Cu NPs (CuC) are highly selective to the colorimetric detection of Na+. The ions like K+, Mg2+ and Zn2+ did not interfere with the Na+ in this sensing technique. Low-cost paper-based sensor strips are fabricated and calibrated for the sensing of sodium in the physiological range and shade cards were developed as a calorimetric guide for estimation of Na+ which makes them ideal point of care diagnostic platform. We demonstrate that the proposed CuC paper strip can be used for detecting Na+ concentration within the whole physiological range in both blood serum and urine.

Green Synthesis of Engineered CdS Nanoparticles with Reduced Cytotoxicity for Enhanced Bioimaging Application.

The modern epoch of semiconductor nanotechnology focuses on its application in biology, especially in medical sciences, to fetch direct benefits to human life. Fabrication of devices for biosensing and bioimaging is a vibrant research topic nowadays. Luminescent quantum dots are the best option to move with, but most of them are toxic to living organisms and hence cannot be utilized for biological applications. Recent publications demonstrate that surface treatment on the nanoparticles leads to enhanced luminescence properties with a drastic reduction in toxicity. The current work introduces surface-modified CdS, prepared via a simple green chemical route with different medicinal leaf extracts as the reaction media. Lower toxicity and multiple emissions in the visible region, observed for the CdS-O.tenuiflorum hybrid structures, make them a better option for future biological applications. Furthermore, the hybrid structure showed enhanced electrical properties, which promises its use in modifying the current optoelectronic devices.

Facile coconut inflorescence sap mediated synthesis of silver nanoparticles and its diverse antimicrobial and cytotoxic properties.

Green synthesis of nanoparticles (NPs) involves the use of diverse extracts of biological origin as substrates to synthesize NPs and can overcome the hazards associated with chemical methods. Coconut inflorescence sap, which is unfermented phloem sap obtained by tapping of coconut inflorescence, is a rich source of sugars and secondary metabolites. In this study, coconut inflorescence sap was used to synthesize silver NPs (AgNPs). We have initially undertaken metabolomic profiling of coconut inflorescence sap from West Coast Tall cultivar to delineate its individual components. It was found to comprise of 64% secondary metabolites, 9% sugars, 12% lipids/fats and 9% peptides in positive mode, whereas in the negative mode, it was 33, 20, 9 and 11%, respectively. The concentration of silver nitrate, inflorescence sap and incubation temperature for the synthesis of AgNPs were optimized. Incubating the reaction mixture at 40 °C was found to enhance AgNP synthesis. The AgNPs synthesized were characterized using UV-visible (UV-Vis) spectrophotometry, X-Ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR) and Transmission Electron Microscopy (TEM). The particles were crystalline in nature and the bulk of the particles were spherical with smooth (thin) shell and poly-dispersed with a diameter ranging from 10 nm to 30 nm. Antimicrobial property of AgNPs was tested in tissue culture of arecanut (Areca catechu L.) where bacterial contamination (Bacillus pumilus) was a frequent occurrence. A significant reduction in the contamination was observed when plantlets were treated with aqueous solutions of AgNPs. Notably, treatment with AgNPs did not affect the growth and development of the arecanut plantlets. Antimicrobial properties of AgNPs synthesized from inflorescence sap were also evaluated in human pathogenic bacteria viz., Escherichia coli ATCC 25922; Salmonella Typhimurium ATCC 14028 and Vibrio parahaemolyticus AQ4037. The antibacterial action was confirmed by determining the production of reactive oxygen species (ROS) and protein leakage studies. Cytotoxicity of AgNPs was quantified in HeLa cells. The viability (%) of HeLa cells declined significantly at 10 mg L-1 concentration of AgNP and complete mortality was observed at a concentration of 60 mg L-1. The study concludes that unfermented inflorescence sap, with above neutral pH, serves as an excellent reducing agent to synthesize AgNPs from Ag+.

A slow, efficient and safe nanoplatform of tailored ZnS QD-mycophenolic acid conjugates for in vitro drug delivery against dengue virus 2 genome replication.

Dengue is a major health concern causing significant mortality, morbidity and economic loss. The development of anti-dengue viral drugs is challenging due to high toxicity, as well as off-target/side effects. We engineered size tuned ZnS QDs as a platform for the efficient delivery of mycophenolic acid (MPA) against dengue virus serotype 2 (DENV2) to evaluate the drug efficacy and toxicity using the DENV2 sub-genomic replicon system in BHK21 cells. The results indicate that the Selectivity Index 50 (SI50) of the ZnS QD-MPA conjugate was two orders higher than that of free MPA with lower cytotoxicity. The effect is attributed to the sustained release of MPA from ZnS QD-MPA. The conjugated MPA caused significant inhibition of the virus at the level of replication and viral protein translation. The study underpins the efficiency of the ZnS QD for the delivery of antiviral drugs against DENV2 with negligible toxicity and side effects.

Label Free, Nontoxic Cu-GSH NCs as a Nanoplatform for Cancer Cell Imaging and Subcellular pH Monitoring Modulated by a Specific Inhibitor: Bafilomycin A1.

Metal nanoparticles-based sensors invoked much research attention in the biomedical field, especially in applications involving live cell imaging and monitoring. Here, a simple cost-effective method is adopted to synthesize glutathione coated copper nanoclusters (Cu-GSH NCs) with strong bright red fluorescence (625 nm). The clusters were found to be containing five Cu(0) atoms complexed with one molecule of glutathione (GSH) as evidenced by MALDI-TOF MS analysis. The synthesized Cu-GSH NCs system responds linearly to the pH in the acidic and alkaline ranges with a high degree of in vitro pH reversibility, projecting its potential as a real time pH sensor. Higher intensity emission observed in acidic conditions can be exploited for its employability as cellular organelle markers. The imaging and sensing potential of Cu-GSH NCs in the live human adenocarcinoma cell line, the HeLa cells, was tested. The treatment of HeLa cells for 48 h imparted deep red fluorescence, owing to the lower level of intracellular pH in cancer cells. In contrast, the imaging using normal cell lines (L-132, lung epithelial cell line) showed significantly lower fluorescence intensity as compared to that of HeLa cells. The subcellular pH-dependent fluorescence emission of Cu-GSH NCs was further assessed by treating HeLa cells with proton pump (V-ATPase) inhibitor Bafilomycin A1, which increases the vesicular pH. Interestingly, the fluorescent intensity of HeLa cells decreases with increasing concentration of Bafilomycin A1 in the presence of Cu-GSH NCs, as evidenced by the fluorescence microscopic images and quantitative fluorescent output. Accordingly, the developed Cu-GSH NCs system can be employed as an efficient pH-based bioimaging probe for the detection of cancer cells with an implied potential for the label free subcellular organelle tracking and marking. Importantly, the Cu-GSH NCs can be used for live cell pH imaging owing to their high degree of reversibility in sensing of pH variation.

Cytotoxicity of nanoparticles - Are the size and shape only matters? or the media parameters too?: a study on band engineered ZnS nanoparticles and calculations based on equivolume stress model.

Size dependent cytotoxicity of ZnS nanoparticles (NPs) was investigated in Human embryonic kidney (HEK-293) cell lines by MTT assay. The cells were incubated with varying concentration of ZnS NPs of sizes 4 nm, 10 nm and 25 nm for 48 h under different (cell culture) media viscosity conditions. The results showed that the toxicity is decreased with the particle size while it is negatively correlated with the viscosity of the media. Theoretical calculations were performed, by assuming equivolume stress model and the same is explained with schematics. Similarly, the effect of particle size and shape on toxicity is explained based on the theoretical calculation of the stress. The calculations showed that out of the possible cellular entry mechanisms for the cubic or cage shaped NPs, the highest toxicity is predicted for the entry through the corners while the lowest toxicity is predicted for the entry through the faces. The experimental observations depicting the cytotoxicity as a function of the viscosity of cell culture media was also validated by stress calculations and are found to be consistent. Studies on size and shape dependence of semiconductor NPs like ZnS is rather scarce, while the role of viscosity of cell culture media on the cytotoxicity is being reported for the first time. In summary, the study indicates that the cytotoxicity is an integral function of size and shape of NPs, physical parameters of the cell culture media in addition to the post entry biochemical interactions with the host cell.

Enhanced photoconductivity in CdS/betanin composite nanostructures.

Development of novel materials for thin film solar cells are gaining significant attention due to their tunable wide bandgap and extensive application potential in flexible energy harvesters. CdS is a known window material for thin film solar cells. Tuning of the photoconductivity of CdS by doping, substitution and grain size tailoring is widely attempted by researchers. Inorganic core/shell structures like CdS/CdSe, CdS/ZnS etc. are other possible candidates with band gap tailorability. However, such attempts are rare in tailoring the photoconductivity by providing an organic shell over the inorganic core. Here the authors synthesised CdS/betanin core/shell structures using wet chemical routes. Spectroscopic studies show that the composite structure is core/shell like, with CdS as the core and betanin (a natural dye), as the outer shell with an average core particle size of 10 nm. The absorption spectra of the composite system show the signature of an additional band in the lower wavelength region and it is redshifted with increase in betanin percentage. The intermediate band observed in the energy of ∼1.75 eV, helps CdS to enhance the rate of absorption. Simultaneous absorbance of lower and higher energy photons from the solar radiation can increase the efficiency of CdS based solar cells. A huge enhancement in conductivity is observed in CdS/betanin composites on illumination with white light due to the transfer of photogenerated electrons from the conduction band of betanin dye to the conduction band of CdS.

Allium sativum Constituents Exhibit Anti-tubercular Activity In vitro and in RAW 264.7 Mouse Macrophage Cells Infected with Mycobacterium tuberculosis H37Rv.

BACKGROUND: Long duration of treatment, side-effects of currently used anti-tubercular drugs and emergence of drug-resistant forms of Mycobacterium tuberculosis (MTB) warrants the need to develop new drugs to tackle the scourge of tuberculosis (TB). Garlic is an edible plant reported to have anti-tubercular activity. However, previous researches on anti-tubercular effect of garlic were focused mostly on preliminary in vitro screening. OBJECTIVE: To identify constituents responsible for anti-tubercular activity of thiosulfinate-derivative rich extract of garlic (GE) and to evaluate activity of the most active constituent in RAW 264.7 mouse macrophage cells infected with M. tuberculosis H37Rv (MTBH). MATERIALS AND METHODS: In the present study, we have isolated eight compounds from GE by flash chromatography. The isolated compounds were characterized by 1H nuclear magnetic resonance spectroscopy, liquid chromatography-mass spectrometry and Fourier transform infrared spectroscopy. Individual isolates and GE were screened for activity against MTBH by Resazurin Microtitre Plate Assay (REMA). RESULTS: Anti-tubercular activity of GE was superior to that of isolates when evaluated by REMA, possibly due to synergism amongst the constituents of GE. Cytotoxicity of GE was evaluated in RAW 264.7 mouse macrophage cells and it was observed that GE had a favorable selectivity index (>10). Therefore, anti-tubercular activity of GE was further evaluated by intracellular macrophage infection model. GE demonstrated concentration-dependent activity in macrophages infected with MTBH. CONCLUSION: This is the first report on intracellular anti-tubercular activity of any extract of garlic or its components. Appreciable intracellular anti-tubercular activity of GE in macrophages combined with low cytotoxicity makes it a suitable candidate for further development as an anti-tubercular agent. SUMMARY: Thiosulfinate-derivative rich extract of Allium sativum showed better activity than its isolated constituents against Mycobacterium tuberculosis H37Rv.(MTBH) when evaluated by Resazurin Microtitre Plate AssayThe extract showed least cytotoxic potential against RAW 264.7 mouse macrophage cells as compared to rifampicin, isoniazid and ethambutol when evaluated by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The extract had an appreciable selectivity indexExtract showed appreciable activity in RAW 264.7 mouse macrophage cells infected with MTBH, indicating its potential to be developed further as an anti-tubercular agent that can be administered as an adjunct to the existing anti-tubercular drug regimen. Abbreviations used: TB: Tuberculosis, MTB: Mycobacterium tuberculosis, MTBH: Mycobacterium tuberculosis H37Rv, GE: Thiosulfinate-derivative rich extract of garlic, REMA: Resazurin Microtitre Plate Assay, VD: Vinyldithiin, CFU: Colony forming unit, 1H NMR: 1H nuclear magnetic resonance spectroscopy, FT-IR: Fourier transform-infrared spectroscopy, LC-MS: Liquid chromatography-mass spectrometry, IC50: Concentration required to inhibit the cells by 50%, ANOVA: Analysis of variance.

High voltage generation from lead-free magnetoelectric coaxial nanotube arrays and their applications in nano energy harvesters.

Harvesting energy from surrounding vibrations and developing self-powered portable devices for wireless and mobile electronics have recently become popular. Here the authors demonstrate the synthesis of piezoelectric energy harvesters based on nanotube arrays by a wet chemical route, which requires no sophisticated instruments. The energy harvester gives an output voltage of 400 mV. Harvesting energy from a sinusoidal magnetic field is another interesting phenomenon for which the authors fabricated a magnetoelectric energy harvester based on piezoelectric-magnetostrictive coaxial nanotube arrays. Piezoelectric K0.5Na0.5NbO3 (KNN) is fabricated as the shell and magnetostrictive CoFe2O4 (CFO) as the core of the composite coaxial nanotubes. The delivered voltages are as high as 300 mV at 500 Hz and at a weak ac magnetic field of 100 Oe. Further tailoring of the thickness of the piezoelectric and magnetic layers can enhance the output voltage by several orders. Easy, single-step wet chemical synthesis enhances the industrial upscaling potential of these nanotubes as energy harvesters. In view of the excellent properties reported here, the lead-free piezoelectric component (KNN) in this nanocomposite should be explored for eco-friendly piezoelectric as well as magnetoelectric power generators in nanoelectromechanical systems (NEMS).