RESUMEN
Processing of electrode slurry, which is highly non-Newtonian fluid, is a critical step in the mass production of lithium-ion batteries (LIBs). While extensional flow plays an important role in the electrode slurry processes such as coating, most previous studies have focused only on the shear rheology, due to the lack of a reliable method to measure the extensional rheological properties of the slurry. Here, it is demonstrated that the extensional rheological properties of the anode slurries can be successfully characterized using the stop-flow-dripping-onto-substrate/capillary break-up rheometry (SF-DoS/CaBER). Using this system, it is observed that the extensional rheology of the anode slurry is significantly affected by the blend ratio of the natural and synthetic graphite, as well as the binder and conductive concentrations. Furthermore, the shear rheology-based model predicts much shorter pinch-off times than those measured experimentally, indicating that the yield-stress of the anode slurry is much larger in extensional flow than in shear flow.
RESUMEN
Monitoring and diagnosing the battery status in real-time are of utmost importance for clarifying failure mechanism, improving battery performance, and ensuring safety, particularly under fast charging conditions. Recently, advanced operando techniques have been developed to observe changes in the microstructures of lithium deposits using laboratory-scale cell designs, focusing on understanding the nature of Li metal electrodes. However, the macroscopic spatial inhomogeneity of lithium electroplating/stripping in the prototype pressurized pouch cells has not been measured in real-time under practical conditions. Herein, a new noninvasive operando technique, spatial pressure mapping analysis, is introduced to macroscopically and quantitatively measure spatial pressure changes in a pressurized pouch cell during cycling. Moreover, dynamic spatial changes in the macroscopic morphology of the lithium metal electrode are theoretically visualized by combining operando pressure mapping data with mechanical analyses of cell components. Additionally, under fast charging conditions, the direct correlation between abrupt capacity fading and sudden increases in spatial pressure distribution inhomogeneity is demonstrated through comparative analysis of pouch cells under various external pressures, electrolyte species, and electrolyte weight to cell capacity (e/c) ratios. This operando technique provides insights for assessing the current battery status and understanding the complex origin of cell degradation behavior in pressurized pouch cells.
RESUMEN
Displays in which arrays of microscopic 'particles', or chiplets, of inorganic light-emitting diodes (LEDs) constitute the pixels, termed MicroLED displays, have received considerable attention1,2 because they can potentially outperform commercially available displays based on organic LEDs3,4 in terms of power consumption, colour saturation, brightness and stability and without image burn-in issues1,2,5-7. To manufacture these displays, LED chiplets must be epitaxially grown on separate wafers for maximum device performance and then transferred onto the display substrate. Given that the number of LEDs needed for transfer is tremendous-for example, more than 24 million chiplets smaller than 100 µm are required for a 50-inch, ultra-high-definition display-a technique capable of assembling tens of millions of individual LEDs at low cost and high throughput is needed to commercialize MicroLED displays. Here we demonstrate a MicroLED lighting panel consisting of more than 19,000 disk-shaped GaN chiplets, 45 µm in diameter and 5 µm in thickness, assembled in 60 s by a simple agitation-based, surface-tension-driven fluidic self-assembly (FSA) technique with a yield of 99.88%. The creation of this level of large-scale, high-yield FSA of sub-100-µm chiplets was considered a significant challenge because of the low inertia of the chiplets. Our key finding in overcoming this difficulty is that the addition of a small amount of poloxamer to the assembly solution increases its viscosity which, in turn, increases liquid-to-chiplet momentum transfer. Our results represent significant progress towards the ultimate goal of low-cost, high-throughput manufacture of full-colour MicroLED displays by FSA.
RESUMEN
Deformable semi-solid liquid metal particles (LMP) have emerged as a promising substitute for rigid conductive fillers due to their excellent electrical properties and stable conductance under strain. However, achieving a compact and robust coating of LMP on fibers remains a persistent challenge, mainly due to the incompatibility of conventional coating techniques with LMP. Additionally, the limited durability and absence of initial electrical conductivity of LMP restrict their widespread application. In this study, we propose a solution process that robustly and compactly assembles mechanically durable and initially conductive LMP on fibers. Specifically, we present a shearing-based deposition of polymer-attached LMP followed by additional coating with CNT-attached LMP to create bi-layer LMP composite with exceptional durability, electrical conductivity, stretchability, and biocompatibility on various fibers. The versatility and reliability of this manufacturing strategy for 1D electronics are demonstrated through the development of sewn electrical circuits, smart clothes, stretchable biointerfaced fiber, and multifunctional fiber probes.
Asunto(s)
Dispositivos Electrónicos Vestibles , Textiles , Reproducibilidad de los Resultados , Polímeros , MetalesRESUMEN
Solution-based thin-film processing is a widely utilized technique for the fabrication of various devices. In particular, the tunability of the ink composition and coating condition allows precise control of thin-film properties and device performance. Despite the advantage of having such tunability, the sheer number of possible combinations of experimental parameters render it infeasible to efficiently optimize device performance and analyze the correlation between experimental parameters and device performance. In this work, a microfluidic screening-embedded thin-film processing technique is developed, through which thin-films of varying ratios of small molecule semiconductor:polymer blend are simultaneously generated and screened in a time- and resource-efficient manner. Moreover, utilizing the thin-films of varying combinations of experimental parameters, machine learning models are trained to predict the transistor performance. Gaussian Process Regression (GPR) algorithms tuned by Bayesian optimization shows the best predictive accuracy amongst the trained models, which enables narrowing down of the combinations of experimental parameters and investigation of the degree of vertical phase separation under the predicted parameter space. The technique can serve as a guideline for elucidating the underlying complex parameter-property-performance correlations in solution-based thin-film processing, thereby accelerating the optimization of various thin-film devices in the future.
RESUMEN
The recent global spread of COVID-19 stresses the importance of developing diagnostic testing that is rapid and does not require specialized laboratories. In this regard, nanomaterial thin-film-based immunosensors fabricated via solution processing are promising, potentially due to their mass manufacturability, on-site detection, and high sensitivity that enable direct detection of virus without the need for molecular amplification. However, thus far, thin-film-based biosensors have been fabricated without properly analyzing how the thin-film properties are correlated with the biosensor performance, limiting the understanding of property-performance relationships and the optimization process. Herein, the correlations between various thin-film properties and the sensitivity of carbon nanotube thin-film-based immunosensors are systematically analyzed, through which optimal sensitivity is attained. Sensitivities toward SARS-CoV-2 nucleocapsid protein in buffer solution and in the lysed virus are 0.024 [fg/mL]-1 and 0.048 [copies/mL]-1, respectively, which are sufficient for diagnosing patients in the early stages of COVID-19. The technique, therefore, can potentially elucidate complex relationships between properties and performance of biosensors, thereby enabling systematic optimization to further advance the applicability of biosensors for accurate and rapid point-of-care (POC) diagnosis.
RESUMEN
Solution-based thin-film solidification is a complex process involving various transport phenomena that are intricately dependent on multiple experimental parameters. The difficulty of analyzing this process experimentally or conducting exact numerical simulation make it challenging to understand, predict, and control the solidification process. In this work, a simple and effective technique to analyze the thin-film solidification process during solution shearing, based on 3D geometrical model of the meniscus, is proposed. The 3D meniscus geometry, which changes depending on the experimental parameters, is attained using high-speed side-view and top-view in situ microscopy. Thereafter, mass and momentum transport mathematical models are applied to obtain numerical solutions of transport phenomena within the meniscus. Utilizing these results, the underlying mechanism of dendritic growth of small molecule organic semiconductor is elucidated, which has previously been unknown. The 3D meniscus modeling is particularly important for this analysis, as dendrite formation is strongly dependent on the meniscus geometry near the contact line and mass transport variation perpendicular to the coating direction. This technique enables the study of complex relationship between experimental parameters and solidification process, which is widely applicable to various materials and coating systems; whereby, better understanding of thin-film growth and device performance optimization is possible.
RESUMEN
In this study, we investigate the percolation threshold of curved linear objects, describing them as quadratic Bézier curves. Using Monte Carlo simulations, we calculate the critical number densities of the curves with different curviness. We also obtain the excluded area of the curves. When an excluded area is given, we can find the critical number density of the curves with arbitrary curviness. Apparent conductivity exponents are computed for the curves, and these values are found to be analogous to that of sticks in the percolative region for a junction resistance dominant system. These results can be used to analyze the optoelectrical performance of metal nanowire films because the high-aspect-ratio metal nanowires can be easily curved during coating.
RESUMEN
Currently, due to the lack of precise control of flow behavior and the understanding of how it influences thin-film crystallization, strict tuning of thin-film properties during solution-based coating is difficult. In this work, a continuous-flow microfluidic-channel-based meniscus-guided coating (CoMiC) is introduced, which is a system that enables manipulation of flow patterns and analysis connecting flow pattern, crystallization, and thin-film properties. Continuous supply of a solution of an organic semiconductor with various flow patterns is generated using microfluidic channels. 3D numerical simulations and in situ microscopy allow the tracking of the flow pattern along its entire path (from within the microfluidic channel to near the liquid-solid boundary), and enable direct observation of thin-film crystallization process. In particular, the generation of chaotic flow results in unprecedented device-to-device uniformity, with coefficient of variation (CV) of 7.3% and average mobility of 2.04 cm2 V-1 s-1 in doped TIPS-pentacene. Furthermore, CV and average mobility of 9.6% and 11.4 cm2 V-1 s-1 are achieved, respectively, in a small molecule:polymer blend system. CoMiC can serve as a guideline for elucidating the relation between flow behavior, liquid-to-solid phase transition, and device performance, which has thus far been unknown.
RESUMEN
The choice of materials that constitute electrodes and the way they are interconnected, i.e., the microstructure, influences the performance of lithium-ion batteries. For batteries with high energy and power densities, the microstructure of the electrodes must be controlled during their manufacturing process. Moreover, understanding the microstructure helps in designing a high-performance, yet low-cost battery. In this study, we propose a systematic algorithm workflow for the images of the microstructure of anodes obtained from a focused ion beam scanning electron microscope (FIB-SEM). Here, we discuss the typical issues that arise in the raw FIB-SEM images and the corresponding preprocessing methods that resolve them. Next, we propose a Fourier transform-based filter that effectively reduces curtain artifacts. Also, we propose a simple, yet an effective, global-thresholding method to identify active materials and pores in the microstructure. Finally, we reconstruct the three-dimensional structures by concatenating the segmented images. The whole algorithm workflow used in this study is not fully automated and requires user interactions such as choosing the values of parameters and removing shine-through artifacts manually. However, it should be emphasized that the proposed global-thresholding method is deterministic and stable, which results in high segmentation performance for all sectioning images.
RESUMEN
Chabazite (CHA)-type zeolites are promising for the separation of CO2 from larger molecules, such as N2 (relevant to postcombustion carbon capture) and CH4 (relevant to natural gas/biogas upgrading). In particular, the pore size of CHA zeolites (0.37 × 0.42 nm2) can recognize slight molecular size differences between CO2 (0.33 nm) and the larger N2 (0.364 nm) or CH4 (0.38 nm) molecules, thus allowing separation in favor of CO2 through CHA membranes. Furthermore, the siliceous constituents in the CHA zeolite can reduce the adsorption capacity toward the smaller H2O molecule (0.265 nm) and, thus, the H2O permeation rate. This is highly desirable for securing good molecular sieving ability with CO2 permselectivity in the presence of H2O vapor. Indeed, a siliceous CHA film obtained with a nominal Si/Al ratio of 100 (CHA_100) showed high CO2/N2 and CO2/CH4 separation performance, especially in the presence of H2O vapor; â¼13.4 CO2/N2 and â¼37 CO2/CH4 separation factors (SFs) at 30 °C. These SFs were higher than the corresponding values (â¼5.2 CO2/CH4 SFs and â¼31 CO2/CH4 SFs) under dry conditions; such improvement could be ascribed to defect blocking by physisorbed water molecules. Finally, the contribution of molecular transport through zeolitic and nonzeolitic parts was quantitatively analyzed by combining information extracted from image processing of fluorescence confocal optical microscopy images with a one-dimensional permeation model. It appears that â¼19 and â¼20% of the total CO2 permeance for CHA_100 were reduced due to transport inhibition by the physisorbed water molecules on the membrane surface and defect, respectively.
RESUMEN
This study proposes a simple method of Au coating on silver nanowires (Ag NWs) transparent conductive films as the anode of organic light emitting diodes (OLED) to increase the work function of the film and thus enhance hole transport. We carefully engineer the process conditions (pretreatment, solution concentrations, and coating number) of the coating using a diluted HAuCl4 solution on the Ag NWs film to minimize etching damage on Ag NWs accompanying the galvanic replacement reaction. Ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy show work function increase of Ag NWs upon Au coating. OLED devices based on Au-coated Ag NWs show a lower turn-on voltage and higher luminance, compared with pristine Ag NWs device. Although the Ag NWs device displays poor efficiencies in the low luminance range due to a high leakage, some of the Au-coated Ag NWs devices showed efficiencies higher than those of the ITO device in a high luminance.
RESUMEN
Silver (Ag) nanowires (NWs) are promising building blocks for the fabrication of stretchable electrodes, but they may undergo mechanical fracture at low tensile strains, which leads to degradation in electrical performance of Ag NW-based stretchable electrodes. Here we report on a simple route to create the percolation networks of Ag NW rings via a conventional spray coating process. We discovered that Ag NWs can be bent into curved shapes within micrometer-sized liquid droplets generated during the spraying process due to elasto-capillary interaction. This curving phenomenon allowed the deposition of Ag NW rings directly on a desired substrate without the need for any complicated process. The network of Ag NW rings effectively releases the applied tensile strains thanks to curved shapes of the constituent NWs, enabling the achievement of excellent electromechanical stability as well as high stretchability. Our approach not only provides a simple, low cost, and scalable route to the fabrication of high-performance Ag NW-based stretchable electrodes, but also opens a new and useful way of engineering the structure of NWs for various applications.
RESUMEN
Scalable sub-micrometer molybdenum disulfide ([Formula: see text]) flake films with highly uniform coverage were created using a systematic approach. An electrohydrodynamic (EHD) printing process realized a remarkably uniform distribution of exfoliated [Formula: see text] flakes on desired substrates. In combination with a fast evaporating dispersion medium and an optimal choice of operating parameters, the EHD printing can produce a film rapidly on a substrate without excessive agglomeration or cluster formation, which can be problems in previously reported liquid-based continuous film methods. The printing of exfoliated [Formula: see text] flakes enabled the fabrication of a gas sensor with high performance and reproducibility for [Formula: see text] and [Formula: see text].
RESUMEN
We first report that two-dimensional (2D) metal (NbSe2)-semiconductor (WSe2)-based flexible, wearable, and launderable gas sensors can be prepared through simple one-step chemical vapor deposition of prepatterned WO3 and Nb2O5. Compared to a control device with a Au/WSe2 junction, gas-sensing performance of the 2D NbSe2/WSe2 device was significantly enhanced, which might have resulted from the formation of a NbxW1-xSe2 transition alloy junction lowering the Schottky barrier height. This would make it easier to collect charges of channels induced by molecule adsorption, improving gas response characteristics toward chemical species including NO2 and NH3. 2D NbSe2/WSe2 devices on a flexible substrate provide gas-sensing properties with excellent durability under harsh bending. Furthermore, the device stitched on a T-shirt still performed well even after conventional cleaning with a laundry machine, enabling wearable and launderable chemical sensors. These results could pave a road toward futuristic gas-sensing platforms based on only 2D materials.
RESUMEN
INTRODUCTION: This study was performed to investigate the cephalometric configuration of the occlusal plane in patients with anterior open bite. METHODS: Of 61 subjects with open bite (overbite ≥3.75 mm) who had been recruited consecutively from January 2006 to November 2013 and had no history of orthodontic treatment, 14 cephalometric landmarks indicating the incisal edge or the buccal or mesiobuccal cusp tips of each tooth were used for K-means clustering to classify the occlusal plane configuration. For the open-bite group and a control group with normal occlusion (n = 38), dentoalveolar height, which is the perpendicular distance of each tooth to the palatal or mandibular plane, was compared among the clusters and between the 2 groups. RESULTS: The open-bite subjects were divided into 2 clusters according to occlusal contact of the premolars: Y-form and V-form (with and without premolar contact, respectively). The normalized dentoalveolar heights of the 4 mandibular teeth (lateral incisor to second premolar) were significantly greater in the Y-form class than in the V-form class. The dentoalveolar heights of the 5 maxillary teeth (lateral incisor to first molar) were significantly greater in the open-bite group than in the control group. CONCLUSIONS: For anterior open-bite treatment, the cephalometric configuration of the occlusal plane should be considered based on the occlusal contacts of the premolars.
Asunto(s)
Cefalometría/métodos , Mordida Abierta/patología , Corona del Diente/patología , Adulto , Proceso Alveolar/patología , Puntos Anatómicos de Referencia/patología , Diente Premolar/patología , Cefalometría/estadística & datos numéricos , Análisis por Conglomerados , Diente Canino/patología , Arco Dental/patología , Oclusión Dental , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador/métodos , Incisivo/patología , Masculino , Mandíbula/patología , Diente Molar/patología , Hueso Paladar/patología , Adulto JovenRESUMEN
Heterostructures of compositionally and electronically variant two-dimensional (2D) atomic layers are viable building blocks for ultrathin optoelectronic devices. We show that the composition of interfacial transition region between semiconducting WSe2 atomic layer channels and metallic NbSe2 contact layers can be engineered through interfacial doping with Nb atoms. WxNb1-xSe2 interfacial regions considerably lower the potential barrier height of the junction, significantly improving the performance of the corresponding WSe2-based field-effect transistor devices. The creation of such alloyed 2D junctions between dissimilar atomic layer domains could be the most important factor in controlling the electronic properties of 2D junctions and the design and fabrication of 2D atomic layer devices.
RESUMEN
Al-based composites incorporating multilayered graphene sheets were developed via a facile approach. The multilayered graphene sheets were fabricated from the expanded graphite via a simple mechanical exfoliation process. The facile extrusion molding process with Al powder and graphene sheets exfoliated from expended graphite afforded Al-based graphene composite rods. These composites showed enhanced thermal conductivity compared to the pristine Al rods. Moreover, the Al-based multilayered graphene sheet composites exhibited lower interfacial contact resistance between graphene-based electrodes than the pristine Al. With increasing degrees of dispersion, the number of exposed graphene sheets increases, thereby significantly decreasing the interfacial contact resistance between the composite and external graphite electrode.
RESUMEN
Concentrated hard-sphere suspensions in the liquid and crystal coexistence region show a unique nonlinear behavior under a large amplitude oscillatory shear flow, the so-called strain stiffening, in which the viscosity or modulus suddenly starts to increase near a critical strain amplitude. Even though this phenomenon has been widely reported in experiments, its key mechanism has never been investigated in a systematic way. To have a good understanding of this behavior, a numerical simulation was performed using the lattice Boltzmann method (LBM). Strain stiffening was clearly observed at large strain amplitudes, and the critical strain amplitude showed an angular frequency dependency. The distortion of the shear stress appeared near the critical strain amplitude, and the nonlinear behavior was quantified by the Fourier transformation (FT) and the stress decomposition methods. Above the critical strain amplitude, an increase in the global bond order parameter Ψ(6) was observed at the flow reversal. The maximum of Ψ(6) and the maximum shear stress occurred at the same strain. These results show how strongly the ordered structure of the particles is related to the stress distortion. The ordered particles maintained a bond number of "two" with alignment with the compressive axis, and they were distributed over a narrow range of angular distribution (110°-130°). In addition, the ordered structure was formed near the lowest shear rate region (the flow reversal). The characteristics of the ordered structure were remarkably different from those of the hydroclusters which are regarded as the origin of shear thickening. It is clear that strain stiffening and shear thickening originate from different mechanisms. Our results clearly demonstrate how the ordering of the particles induces strain stiffening in the liquid and crystal coexistence region.
RESUMEN
We demonstrate continuous roll-to-roll production of highly conductive silver network films on a plastic substrate via mechanical and chemical welding processes. This process included three essential steps: (i) solvent spraying, (ii) roll compression, and (iii) salt treatment and washing. The sheet resistance of the resulting AgNW film was 5 Ω sq(-1) at 92% transmittance, which was the lowest sheet resistance and the highest transparency among the values reported previously for solution-processed AgNW electrodes. Moreover, the strong contacts among the AgNWs dramatically enhanced the mechanical stability of the network film. The resulting AgNW film was successfully applied to various organic electronic devices, such as organic field-effect transistors (OFETs), organic light-emitting diodes (OLEDs), and organic solar cells (OSCs).