RESUMEN
This study evaluates the impact of Kirschner wire (K-wire) insertion direction on the biomechanical properties of combined tibial plateau leveling osteotomy (TPLO) and tibial tuberosity transposition (TTT) procedures in small-breed dogs with cranial cruciate ligament rupture and medial patella luxation. Twenty-one cadaveric tibiae were divided into two groups; the specimens were divided into two groups; one underwent TPLO-TTT with a proximal pin placement (Group TTP), and the other received TPLO-TTT with a distal pin placement (Group TTD). For both pin placements, two additional subgroups were formed: one with a 0.56 mm tension band (Groups TTP0.56 and TTD0.56) and the other with a 0.76 mm tension band (Groups TTP0.76 and TTD0.76). The tensile force was applied, and failure load and mode were recorded. The distal pin direction in Group TTD0.56 exhibited a significantly higher mean failure load (380.1 N) compared to the proximal pin direction in Group TTP0.56 (302.2 N, p = 0.028). No significant differences were observed among the other groups. This study concludes that distal pin placement can provide similar or improved mechanical stability in cases with limited space for proximal pin placement during combined TPLO and TTT procedures.
RESUMEN
Robotic exoskeletons have considerable, but largely untapped, potential to restore mobility in individuals with neurological disorders, and other conditions that result in partial or complete immobilization. The growing demand for these devices necessitates the development of technology to characterize the human-robot system during exoskeletal-assisted locomotion (EAL) and accelerate robot design refinements. The goal of this study was to combine controlled experiments with computational modeling to build a virtual simulator of EAL. The first objective was to acquire a minimum empirical dataset comprising human-robot kinematics, ground reaction forces, and electromyography during exoskeletal-assisted and unassisted locomotion from an able-bodied participant. The second objective was to quantify the dynamics of the human-robot system using a subject-specific virtual simulator reproducing EAL compared to the dynamics of normal gait. We trained an able-bodied participant to ambulate independently in a Food and Drug Administration-approved exoskeleton, the ReWalk P6.0 (ReWalk Robotics, Yoknaem, Israel). We analyzed the motion of the participant during exoskeletal-assisted and unassisted walking, sit-to-stand, and stand-to-sit maneuvers, with simultaneous measurements of (i) three-dimensional marker trajectories, (ii) ground reaction forces, (iii) electromyography, and (iv) exoskeleton encoder data. We created a virtual simulator in OpenSim, comprising a whole-body musculoskeletal model and a full-scale exoskeleton model, to determine the joint kinematics and moments during exoskeletal-assisted and unassisted maneuvers. Mean peak knee flexion angles of the human subject during exoskeletal-assisted walking were 50.1° ± 0.6° (left) and 52.6° ± 0.7° (right), compared to 68.6° ± 0.3° (left) and 70.7° ± 1.1° (right) during unassisted walking. Mean peak knee extension moments during exoskeletal-assisted walking were 0.10 ± 0.10 Nm/kg (left) and 0.22 ± 0.11 Nm/kg (right), compared to 0.64 ± 0.07 Nm/kg (left) and 0.73 ± 0.10 Nm/kg (right) during unassisted walking. This work provides a foundation for parametric studies to characterize the effects of human and robot design variables, and predictive modeling to optimize human-robot interaction during EAL.
Asunto(s)
Dispositivo Exoesqueleto , Robótica , Humanos , Extremidad Inferior , Locomoción , Caminata , Robótica/métodos , Fenómenos Biomecánicos , MarchaRESUMEN
A 4-year-old, intact, female, Collie was presented with 5 month history of right hindlimb lameness. Lateral luxation of the superficial digital flexor tendon (SDFT) was diagnosed on the basis of the clinical, radiographic and ultrasonographic finding. Intraoperatively, shallow right calcaneal tuber was observed. Block recession calcaneoplasty with retinaculum repair using anchor screw were performed to manage SDFT luxation. Additionally, temporary restraining pin was placed on lateral aspect of the calcaneal tuber. The patient demonstrated mild lameness at 2 weeks postoperatively and improved to normal limb function at 12 weeks postoperatively. As the gold standard of surgical techniques for SDFT luxation has not yet been reported, block recession calcaneooplasty may be an alternative surgical option for patients with calcaneal morphologic abnormalities causing SDFT luxation.
RESUMEN
Heat transfer under flow boiling is better in a rectangular channel filled with open-cell metal foam than in an empty channel, but the high pressure drop is a drawback of the empty channel method. In this study, various types of metal foam insert configurations were tested to reduce the pressure drop while maintaining high heat transfer. Specifically, we measured the boiling heat transfer and pressure drop of a two-phase vertical upward flow of R245fa inside a channel. To measure the pressure and temperature differences of the metal foam, differential pressure transducers and T-type thermocouples were used at both ends of the test section. While the saturation pressure was kept constant at 5.9 bar, the steam quality at the inlet of the test section was changed from 0.05 to 0.99. The channel height, moreover, was 3 mm, and the mass flux ranged from 133 to 300 kg/m2s. The two-phase flow characteristics were observed through a high-speed visualization experiment. Heat transfer tended to increase with the mean vapor quality, and, as expected, the fully filled metal foam channel offered the highest thermal performance. The streamwise insert pattern model had the lowest heat transfer at a low mass flux. However, at a higher mass flux, the three different insert models presented almost the same heat transfer coefficients. We found that the streamwise pattern model had a very low pressure drop compared to that of the spanwise pattern models. The goodness factors of the flow area and the core volume of the streamwise patterned model were higher than those of the full-filled metal foam channel.
RESUMEN
The ability to control the surface composition and morphology of alloy catalysts is critical for achieving high activity and durability of catalysts for oxygen reduction reaction (ORR) and fuel cells. This report describes an efficient surfactant-free synthesis route for producing a twisty nanowire (TNW) shaped platinum-iron (PtFe) alloy catalyst (denoted as PtFe TNWs) with controllable bimetallic compositions. PtFe TNWs with an optimal initial composition of â¼24% Pt are shown to exhibit the highest mass activity (3.4 A/mgPt, â¼20 times higher than that of commercial Pt catalyst) and the highest durability (<2% loss of activity after 40â¯000 cycles and <30% loss after 120â¯000 cycles) among all PtFe-based nanocatalysts under ORR or fuel cell operating conditions reported so far. Using ex situ and in situ synchrotron X-ray diffraction coupled with atomic pair distribution function (PDF) analysis and 3D modeling, the PtFe TNWs are shown to exhibit mixed face-centered cubic (fcc)-body-centered cubic (bcc) alloy structure and a significant lattice strain. A striking finding is that the activity strongly depends on the composition of the as-synthesized catalysts and this dependence remains unchanged despite the evolution of the composition of the different catalysts and their lattice constants under ORR or fuel cell operating conditions. Notably, dealloying under fuel cell operating condition starts at phase-segregated domain sites leading to a final fcc alloy structure with subtle differences in surface morphology. Due to a subsequent realloying and the morphology of TNWs, the surface lattice strain observed with the as-synthesized catalysts is largely preserved. This strain and the particular facets exhibited by the TNWs are believed to be responsible for the observed activity and durability enhancements. These findings provide new insights into the correlation between the structure, activity, and durability of nanoalloy catalysts and are expected to energize the ongoing effort to develop highly active and durable low-Pt-content nanowire catalysts by controlling their alloy structure and morphology.
RESUMEN
Botulinum toxin A (BoNT-A) is used clinically for various muscle disorders and acts by preventing the release of the neurotransmitter acetylcholine into the synapse space. Here, we compared the efficacy of prabotulinumtoxinA (PRA) and onabotulinumtoxinA (ONA) for the reduction in hypertrophy in myostatin-deficient (Mstn-/- ) mice. Two different BoNT-A products (2.5, 10 and 25 U/kg) were injected to paralyse the hindlimb for 2 months, after which sciatic nerve conduction study, 3D micro-CT, haematoxylin and eosin (H&E) and dystrophin staining were conducted. Administration of BoNT-A products induced denervation-mediated atrophy and alleviated muscle hypertrophy generated in Mstn-/- mice. The present study revealed that each BoNT-A regulates skeletal muscle size, myofibre number and myofibre diameter in Mstn-/- mice. The potential applicability of BoNT-A for the treatment of rare muscle hypertrophic diseases was demonstrated. Compared with ONA, PRA had a comparable ability to act in the local area.
Asunto(s)
Toxinas Botulínicas Tipo A/farmacología , Toxinas Botulínicas/farmacología , Hipertrofia/tratamiento farmacológico , Enfermedades Musculares/tratamiento farmacológico , Miostatina/genética , Animales , Toxinas Botulínicas/administración & dosificación , Toxinas Botulínicas Tipo A/administración & dosificación , Modelos Animales de Enfermedad , Relación Dosis-Respuesta a Droga , Miembro Posterior , Hipertrofia/fisiopatología , Masculino , Ratones , Ratones Endogámicos C57BL , Ratones Noqueados , Músculo Esquelético/patología , Enfermedades Musculares/fisiopatología , Fármacos Neuromusculares/administración & dosificación , Fármacos Neuromusculares/farmacologíaRESUMEN
PURPOSE: The frequency of zygomaticomaxillary fracture is second only to nasal bone fracture. Up to 30% to 80% of zygomaticomaxillary fracture patients complain of sensory disturbance results from infraorbital nerve injury. The objective of this study was to detect what factors are related to infraorbital nerve recovery and specifically to investigate decompression of infraorbital foramen improves sensory recovery. PATIENTS AND METHODS: A total of 257 patients were assessed with unilateral zygomaticomaxillary complex fracture, treated with open reduction and internal fixation with orbital floor reconstruction. Of these, 166 patients followed up over 6 months were included in this study. The data collected included age, sex, pre, and postoperative sensory score measured by visual analogue scale (range: 0-10). Sensory score was measured at the infraorbital nerve innervation. The impact of decompression operation on the change of sensory score was compared. Statistical analysis was performed using SPSS 18.0 software (SPSS Inc, Chicago, IL). RESULTS: In patients with preoperative hypoesthesia, difference between postoperative and preoperative sensory score was 3.2 (decompression group), 4.4 (nondecompression group), respectively, but not significant (P > 0.05). In patients without preoperative hypoesthesia, difference between postoperative and preoperative sensory score was -0.2 (decompression group), -0.3 (nondecompression group), respectively, and did not show significant association (P > 0.05). DISCUSSION: Based on this result, in patients with preoperative hypoesthesia, infraorbital decompression operation is not useful for sensory recovery. This result indicates infraorbital sensory disturbance occurs from not only pinched nerve injury at the infraorbital foramen but also traction nerve injury at the other part of the nerve.
Asunto(s)
Descompresión Quirúrgica/métodos , Fracturas Maxilares/cirugía , Órbita/inervación , Fracturas Cigomáticas/cirugía , Adulto , Femenino , Estudios de Seguimiento , Fijación Interna de Fracturas/métodos , Humanos , Hipoestesia/cirugía , Masculino , Nervio Maxilar/lesiones , Nervio Maxilar/fisiopatología , Órbita/lesiones , Órbita/cirugía , Procedimientos de Cirugía Plástica/métodos , Recuperación de la Función/fisiología , Sensación/fisiología , Escala Visual AnalógicaRESUMEN
Neurotrophin-3 (NT-3) is well known to play an important role in facilitating neuronal survival and differentiation during development. However, the mechanisms by which neurotrophin-3 promotes prolonged Akt/MAPK signaling at an early stage are not well understood. Here, we report that NT-3 works at an early stage of neuronal differentiation in mouse neural stem cells (NSCs). After treatment with NT-3 for 12h, more NSCs differentiated into neurons than did untreated cells. These findings demonstrated that stimulation with NT-3 causes NSCs to differentiate into neurons through a phosphatidylinositol 3-kinase (PI3K)/Akt signaling pathway and the phosphorylated extracellular signal-regulated kinase (ERK) pathway. In addition, treatment with NT-3 induced neurite outgrowth by specific phosphorylation of p38 MAPK, which was accompanied by neuronal differentiation. Taken together, these results suggest that NT-3, along with the Trk C receptors in NSCs, might lead to the survival and neuronal differentiation of NSCs via two distinct downstream signaling pathways at an early stage of neuronal differentiation.
Asunto(s)
Sistema de Señalización de MAP Quinasas/fisiología , Neuronas/citología , Neuronas/metabolismo , Neurotrofina 3/administración & dosificación , Células Madre/citología , Células Madre/metabolismo , Animales , Diferenciación Celular/efectos de los fármacos , Células Cultivadas , Relación Dosis-Respuesta a Droga , Sistema de Señalización de MAP Quinasas/efectos de los fármacos , Ratones , Neuronas/efectos de los fármacos , Células Madre/efectos de los fármacosRESUMEN
Heat treatment is commonly used to control viral contamination of seeds. To study virus inactivation, virus was purified from seeds contaminated with Cucumber green mottle mosaic virus (CGMMV) after various heat treatments. CGMMV particles were observed to be physically disrupted by high temperature. Analysis of viral RNA revealed that the 5' and 3' termini of the genome were protected whereas regions between 2-2.5, 3.2-3.7 and 4-4.8 kb from the 5' terminus were not. Heat inactivation of virus on seeds was confirmed by RT-PCR using primers for a heat-sensitive region. The RT-PCR approach developed here may prove preferable to time- and labor-intensive bioassays for assessing virus heat inactivation.