Photo-Polymerizable Autologous Growth-Factor Loaded Silk-Based Biomaterial-Inks toward 3D Printing-Based Regeneration of Meniscus Tears.

Meniscus tears in the avascular region undergoing partial or full meniscectomy lead to knee osteoarthritis and concurrent lifestyle hindrances in the young and aged alike. Here they reported ingenious photo-polymerizable autologous growth factor loaded 3D printed scaffolds to potentially treat meniscal defects . A shear-thinning photo-crosslinkable silk fibroin methacrylate-gelatin methacrylate-polyethylene glycol dimethacrylate biomaterial-ink is formulated and loaded with freeze-dried growth factor rich plasma (GFRP) . The biomaterial-ink exhibits optimal rheological properties and shape fidelity for 3D printing. Initial evaluation revealed that the 3D printed scaffolds mimic mechanical characteristics of meniscus, possess favourable porosity and swelling characteristics, and demonstrate sustained GFRP release. GFRP laden 3D scaffolds are screened with human neo-natal stem cells in vitro and biomaterial-ink comprising of 25 mg mL-1 of GFRP (GFRP25) is found to be amicable for meniscus tissue engineering. GFRP25 ink demonstrated rigorous rheological compliance, and printed constructs demonstrated long term degradability (>6 weeks), GFRP release (>5 weeks), and mechanical durability (3 weeks). GFRP25 scaffolds aided in proliferation of seeded human neo-natal stem cellsand their meniscus-specific fibrochondrogenic differentiation . GFRP25 constructs show amenable inflammatory response in vitro and in vivo. GFRP25 biomaterial-ink and printed GFRP25 scaffolds could be potential patient-specific treatment modalities for meniscal defects.

In Vitro and In Vivo Bone Regeneration Assessment of Titanium-Doped Waste Eggshell-Derived Hydroxyapatite in the Animal Model.

In this work, a titanium-doped hydroxyapatite (HAp) scaffold was produced from two different sources (natural eggshell and laboratory-grade reagents) to compare the efficacy of natural and synthetic resources of HAp materials on new bone regeneration. This comparative study also reports the effect of Ti doping on the physical, mechanical, and in vitro as well as in vivo biological properties of the HAp scaffold. Pellets were prepared in the conventional powder metallurgy route, compacted, and sintered at 900 °C, showing sufficient porosity for bony ingrowth. The physical-mechanical characterizations were performed by density, porosity evaluation, XRD, FTIR, SEM analysis, and hardness measurement. In vitro interactions were evaluated by bactericidal assay, hemolysis, MTT assay, and interaction with simulated body fluid. All categories of pellets showed absolute nonhemolytic and nontoxic character. Furthermore, significant apatite formation was observed on the Ti-doped HAp samples in the simulated body fluid immersion study. The developed porous pellets were implanted to assess the bone defect healing in the femoral condyle of healthy rabbits. A 2 month study after implantation showed no marked inflammatory reaction for any samples. Radiological analysis, histological analysis, SEM analysis, and oxytetracycline labeling studies depicted better invasion of mature osseous tissue in the pores of doped eggshell-derived HAp scaffolds as compared to the undoped HAp, and laboratory-made samples. Quantification using oxytetracycline labeling depicted 59.31 ± 1.89% new bone formation for Ti-doped eggshell HAp as compared to Ti-doped pure HAp (54.41 ± 1.93) and other undoped samples. Histological studies showed the presence of abundant osteoblastic and osteoclastic cells in Ti-doped eggshell HAp in contrast to other samples. Radiological and SEM data also showed similar results. The results indicated that Ti-doped biosourced HAp samples have good biocompatibility, new bone-forming ability, and could be used as a bone grafting material in orthopedic surgery.

Polymeric biomaterials-based tissue engineering for wound healing: a systemic review.

Background: Biomaterials are vital products used in clinical sectors as alternatives to several biological macromolecules for tissue engineering techniques owing to their numerous beneficial properties, including wound healing. The healing pattern generally depends upon the type of wounds, and restoration of the skin on damaged areas is greatly dependent on the depth and severity of the injury. The rate of wound healing relies on the type of biomaterials being incorporated for the fabrication of skin substitutes and their stability in in vivo conditions. In this review, a systematic literature search was performed on several databases to identify the most frequently used biomaterials for the development of successful wound healing agents against skin damage, along with their mechanisms of action. Method: The relevant research articles of the last 5 years were identified, analysed and reviewed in this paper. The meta-analysis was carried out using PRISMA and the search was conducted in major scientific databases. The research of the most recent 5 years, from 2017-2021 was taken into consideration. The collected research papers were inspected thoroughly for further analysis. Recent advances in the utilization of natural and synthetic biomaterials (alone/in combination) to speed up the regeneration rate of injured cells in skin wounds were summarised. Finally, 23 papers were critically reviewed and discussed. Results: In total, 2022 scholarly articles were retrieved from databases utilizing the aforementioned input methods. After eliminating duplicates and articles published before 2017, ~520 articles remained that were relevant to the topic at hand (biomaterials for wound healing) and could be evaluated for quality. Following different procedures, 23 publications were selected as best fitting for data extraction. Preferred Reporting Items for Systematic Reviews and Meta-Analyses for this review illustrates the selection criteria, such as exclusion and inclusion parameters. The 23 recent publications pointed to the use of both natural and synthetic polymers in wound healing applications. Information related to wound type and the mechanism of action has also been reviewed carefully. The selected publication showed that composites of natural and synthetic polymers were used extensively for both surgical and burn wounds. Extensive research revealed the effects of polymer-based biomaterials in wound healing and their recent advancement. Conclusions: The effects of biomaterials in wound healing are critically examined in this review. Different biomaterials have been tried to speed up the healing process, however, their success varies with the severity of the wound. However, some of the biomaterials raise questions when applied on a wide scale because of their scarcity, high transportation costs and processing challenges. Therefore, even if a biomaterial has good wound healing qualities, it may be technically unsuitable for use in actual medical scenarios. All of these restrictions have been examined closely in this review.

In vivo biocompatibility of SrO and MgO doped brushite cements.

The addition of dopants in biomaterials has emerged as a critical regulator of bone formation and regeneration due to their imminent role in the biological process. The present work evaluated the role of strontium (Sr) and magnesium (Mg) dopants in brushite cement (BrC) on in vivo bone healing performance in a rabbit model. Pure, 1 wt% SrO (Sr-BrC), 1 wt% MgO (Mg-BrC), and a binary composition of 1.0 wt% SrO + 1.0 wt% MgO (Sr + Mg-BrC) BrCs were implanted into critical-sized tibial defects in rabbits for up to 4 months. The in vivo bone healing of three doped and pure BrC samples was examined and compared using sequential radiological examination, histological evaluations, and fluorochrome labeling studies. The results indicated excellent osseous tissue formation for Sr-BrC and Sr + Mg-BrC and moderate bone regeneration for Mg-BrC compared to pure BrC. Our findings indicated that adding small amounts of SrO, MgO, and binary dopants to the BrC can significantly influence new bone formation for bone tissue engineering.

In Vitro Degradation and In Vivo Biocompatibility of Strontium-Doped Magnesium Phosphate-Reinforced Magnesium Composites.

Magnesium is projected for use as a degradable orthopedic biomaterial. However, its fast degradation in physiological media is considered as a significant challenge for its successful clinical applications. Bioactive reinforcements containing Mg-based composites constitute one of the promising approaches for developing degradable metallic implants because of their adjustable mechanical behaviors, corrosion resistance, and biological response. Strontium is a trace element known for its role in enhancing osteoblast activity. In this study, bioactive SrO-doped magnesium phosphate (MgP)-reinforced Mg composites containing 1, 3, and 5 wt % MgP were developed through the casting route. The influence of the SrO-doped MgP reinforcement on degradation behaviors of the composites along with its cell-material interactions and in vivo biocompatibility was investigated. The wt % and distribution of MgP particles significantly improved the mechanical properties of the composite. HBSS immersion study indicated the least corrosion rate (0.56 ± 0.038 mmpy) for the Mg-3MgP composite. The higher corrosion resistance of Mg-3MgP leads to a controlled release of Sr-containing bioactive reinforcement, which eventually enhanced the cytotoxicity as measured using MG-63 cell-material interactions. The in vivo biocompatibility of the composite was evaluated using the rabbit femur defect model. Micro-computed tomography (µ-CT) and histological analysis supported the fact that Mg-3MgP maintained its structural integrity and enhanced osteogenesis (50.36 ± 2.03%) after 2 months of implantation. The results indicated that the Mg-MgP composite could be used as a degradable internal fracture fixation device material.

Silk-based phyto-hydrogel formulation expedites key events of wound healing in full-thickness skin defect model.

Immense socio-economic burden of chronic wound demands effective, low-cost strategies for wound care. Herein, we have developed a chemical crosslinker-free phyto-hydrogel by encapsulating phytochemicals of Aloe vera mucilage extract (AVM) in the self-assembled polymeric chains of two different silk fibroin (SF) proteins (from Bombyx mori and Antheraea assamensis). Additionally, polyvinylpyrrolidone (PVP) has been used as a stabilizer that also contributed to the mucoadhesive property of the composite (SAP; made of SF, AVM, and PVP) hydrogel. The physicochemical properties of the hydrogel were evaluated and compared with SF hydrogel containing only SF proteins without any additives. The biocompatibility assessment of the hydrogel under in vitro conditions has shown improved cellular proliferative and migratory responses, suggesting faster tissue repairability of the hydrogel. A detailed in vivo comparative study with a commercially available DuoDERM® gel revealed that SAP hydrogel not only promoted wound closure but also showed better deposition and remodeling of the extracellular matrix. Moreover, the hydrogel also demonstrated its ability to downregulate pro-inflammatory markers (IL-1ß, TNF-α) and upregulation of anti-inflammatory markers (IL-10, TGF-ß) at the early stage of healing. Therefore, the bioactive proteins-carbohydrates composite efficiently accelerates skin regeneration and possesses great translational potential to offer a low-cost alternative wound care therapeutic.

Functionalized Silk Vascular Grafts with Decellularized Human Wharton's Jelly Improves Remodeling via Immunomodulation in Rabbit Jugular Vein.

Cell-free polymeric tissue-engineered vascular grafts (TEVGs) have shown great promise towards clinical translation; however, their limited bioactivity and remodeling ability challenge this cause. Here, a novel cell-free bioresorbable small diameter silk TEVG system functionalized with decellularized human Wharton's jelly (dWJ) matrix is developed and successfully implanted as interposition grafts into rabbit jugular vein. Implanted TEVGs remain patent for two months and integrate with host tissue, demonstrating neo-tissue formation and constructive remodeling. Mechanistic analysis reveals that dWJ matrix is a reservoir of various immunomodulatory cytokines (Interleukin-8, 6, 10, 4 and tumor necrosis factor alpha (TNF-α)), which aids in upregulating M2 macrophage-associated genes facilitating pro-remodeling behavior. Besides, dWJ treatment to human endothelial cells upregulates the expression of functional genes (cluster of differentiation 31 (CD31), endothelial nitric oxide synthase (eNOS), and vascular endothelial (VE)-cadherin), enables faster cell migration, and elevates nitric oxide (NO) production leading to the in situ development of endothelium. The dWJ functionalized silk TEVGs support increased host cell recruitment than control, including macrophages and vascular cells. It endows superior graft remodeling in terms of a dense medial layer comprising smooth muscle cells and elevates the production of extracellular matrix proteins (collagen and elastin). Altogether, these findings suggest that dWJ functionalization imitates the usefulness of cell seeding and enables graft remodeling.

Development of nano-porous hydroxyapatite coated e-glass for potential bone-tissue engineering application: An in vitro approach.

To reconstruct the defects caused by craniectomies autologous, bone grafting was usually used, but they failed most commonly due to bone resorption, infections and donor-site morbidity. In the present investigation, an effort has been made for the first time to check the feasibility and advantage of using hydroxyapatite (HAp) coated e-glass as component of bone implants. Sol-gel synthesized coatings were found to be purely hydroxyapatite from XRD with graded and interconnected pores all over the surface observable in TEM. The interconnected porous nature of ceramics are found to increase bioactivity by acting to up-regulate the process of osseointegration through enhanced nutrient transfer and induction of angiogenesis. From TEM studies and nano indentation studies, we have shown that pores were considered to be appropriate for nutrient supply without compromising the strength of sample while in contact with physiological fluid. After SBF immersion test, porous surface was found to be useful for nucleation of apatite crystals, hence increasing the feasibility and bioactivity of sample. However, our quasi-dynamic study showed less crystallization but had significant formation of apatite layer. Overall, the in vitro analyses show that HAp coated e-glass leads to significant improvement of implant properties in terms of biocompatibility, cell viability and proliferation, osteoinductivity and osteoconductivity. HAp coating of e-glass can potentially be utilized in fabricating durable and strong bioactive non-metallic implants and tissue engineering scaffolds.

Silkworm Silk Matrices Coated with Functionalized Spider Silk Accelerate Healing of Diabetic Wounds.

Complex cutaneous wounds like diabetic foot ulcers represent a critical clinical challenge and demand a large-scale and low-cost strategy for effective treatment. Herein, we use a rabbit animal model to investigate efficacy of bioactive wound dressings made up of silk biomaterials. Nanofibrous mats of Antheraea assama silkworm silk fibroin (AaSF) are coated with various recombinant spider silk fusion proteins through silk-silk interactions to fabricate multifunctional wound dressings. Two different types of spider silk coatings are used to compare their healing efficiency: FN-4RepCT (contains a cell binding motif derived from fibronectin) and Lac-4RepCT (contains a cationic antimicrobial peptide from lactoferricin). AaSF mats coated with spider silk show accelerated wound healing properties in comparison to the uncoated mats. Among the spider silk coated variants, dual coating of FN-4RepCT and Lac-4RepCT on top of AaSF mat demonstrated better wound healing efficiency, followed by FN-4RepCT and Lac-4RepCT single coated counterparts. The in vivo study also reveals excellent skin regeneration by the functionalized silk dressings in comparison to commercially used Duoderm dressing and untreated wounds. The spider silk coatings demonstrate early granulation tissue development, re-epithelialization, and efficient matrix remodelling of wounds. The results thus validate potential of bioactive silk matrices in faster repair of diabetic wounds.

Immunomodulatory injectable silk hydrogels maintaining functional islets and promoting anti-inflammatory M2 macrophage polarization.

Islet transplantation is considered the most promising treatment for type 1 diabetes. However, the clinical success is limited by islet dysfunction in long-term culture. In this study, we have utilized the rapid self-gelation and injectability offered by blending of mulberry silk (Bombyx mori) with non-mulberry (Antheraea assama) silk, resulting in a biomimetic hydrogel. Unlike the previously reported silk gelation techniques, the differences in amino acid sequences of the two silk varieties result in accelerated gelation without requiring any external stimulus. Gelation study and rheological assessment depicts tuneable gelation as a function of protein concentration and blending ratio with minimum gelation time. In vitro biological results reveal that the blended hydrogels provide an ideal 3D matrix for primary rat islets. Also, A. assama fibroin with inherent Arg-Gly-Asp (RGD) shows significant influence on islet viability, insulin secretion and endothelial cell maintenance. Furthermore, utility of these hydrogels demonstrate sustained release of Interleukin-4 (IL-4) and Dexamethasone with effective M2 macrophage polarization while preserving islet physiology. The immuno-informed hydrogel demonstrates local modulation of inflammatory responses in vivo. Altogether, the results exhibit promising attributes of injectable silk hydrogel and the utility of non-mulberry silk fibroin as an alternative biomaterial for islet encapsulation.

Polycaprolactone nanofibers functionalized with placental derived extracellular matrix for stimulating wound healing activity.

Impaired wound healing is primarily associated with inadequate angiogenesis, repressed cell migration, deficient synthesis of extracellular matrix (ECM) component/growth factors, and altered inflammatory responses in the wound bed environment. Herein, we report a simple process for the fabrication of PCL nanofiber mats embedded with placental-derived bioactive molecules (PCL-sPEM) rich in growth factors for full-thickness cutaneous wound healing. The physicochemical attributes and biological composition of PCL-sPEM nanofiber mats delivered a nontoxic environment in vitro and significantly promoted the adhesion, infiltration, and proliferation of human fibroblasts/keratinocytes. Conditioned media extracted from PCL-sPEM nanofiber mats enhanced the migration potential of the cells (fibroblasts/keratinocytes) involved in wound healing due to the release of growth factors embedded in it. Further, PCL-sPEM nanofiber mats attracted, stimulated and supported vascularization as determined by the Chick Chorioallantoic Membrane (CAM) assay. Interestingly, critical skin wounds of rats treated with PCL-sPEM nanofiber mats facilitated improved wound closure with well-organized dermis and epidermis, which could be ascribed to prominent vascularization, augmented migration of human foreskin fibroblasts (HFFs) & human epidermal keratinocytes (HEKs), increased collagen synthesis and early re-epithelialization. Collectively, our results suggest that PCL-sPEM nanofiber mats embedded with growth factors could be a suitable matrix for treating critical full-thickness wounds.

Functional hepatocyte clusters on bioactive blend silk matrices towards generating bioartificial liver constructs.

The creation of in vitro functional hepatic tissue simulating micro-environmental niche of native liver is a keen area of research due to its demand in bioartificial liver (BAL) and cell-based tissue engineering. Here, we investigated the potential of novel blend (BA) silk scaffold fabricated by blending mulberry (Bombyx mori, BM) silk fibroin with cell adhesion motif (RGD) rich non-mulberry (Antheraea assamensis, AA) silk fibroin, in generating a functional liver construct. Three-dimensional (3D) porous silk scaffolds (BM, AA and BA) were physico-chemically characterized and functionally evaluated using human hepatocarcinoma cells (HepG2) and primary neonatal rat hepatocytes. The growth and distribution of hepatocytes within the scaffolds were tracked by FESEM, alamar blue proliferation assay and live/dead staining. Hemocompatible BA scaffolds supported the formation of high density hepatocyte clusters, facilitating cell-matrix and cell-cell interactions. Blend scaffolds evinced enhanced liver-specific functions of cultured hepatocytes in terms of albumin synthesis, urea synthesis and cytochrome P450 enzyme activity over 21 days. Subcutaneous implantation of scaffolds demonstrated minimal macrophage infiltration in blend scaffolds. These findings substantiate that the integral property of blend (BA) scaffold offers a befitting environment by influencing spheroidal growth of hepatocytes with enhanced biological activity. Collectively, the present study provides a new 3D bio-matrix niche for growing functional liver cells that would have future prospects in BAL as well as regenerative medicine. STATEMENT OF SIGNIFICANCE: An end stage liver disease called cirrhosis perturbs the self-healing ability and physiological functions of liver. Due to the scarcity of healthy donors, a functional in vitro hepatic construct retaining the liver-specific functions is in great demand for its prospects in bioartificial liver (BAL) and cell-based tissue engineering. Physicochemical attributes of a matrix influence the behavior of cultured hepatocytes in terms of attachment, morphology and functionality. Mulberry and non-mulberry silk fibroin presents unique amino acid sequence with difference in hydrophobicity and crystallinity. Considering this, the present study focuses on the development of a suitable three-dimensional (3D) bioactive matrix incorporating both mulberry silk fibroin and cell adhesion motif (RGD) rich non-mulberry silk fibroin. Porous silk blend scaffolds facilitated the formation of hepatocyte clusters with enhanced liver-specific functions emphasizing both cell-cell and cell-matrix interactions. Hemocompatibility and integral property of blend scaffolds offers a biological niche for seeding functional liver cells that would have future prospects in biohybrid devices.

Functionalized PVA-silk blended nanofibrous mats promote diabetic wound healing via regulation of extracellular matrix and tissue remodelling.

Chronic cutaneous ulcers, a complex pathophysiological diabetic condition, represent a critical clinical challenge in the current diabetes mellitus pandemic. Consequently, there is a compelling need for bioactive dressings that can trigger healing processes for complete wound repair. Silk fibroin (SF), a natural protein polymer from mulberry and non-mulberry silkworms, has properties that support accelerated wound healing rate. SF from non-mulberry variety possesses additional cell-binding motifs (arginine, glycine, and aspartate), offering cell-material interactions. This study is aimed to investigate wound healing efficacy of dressings made up of various SF varieties blended with poly(vinyl alcohol) biopolymer in alloxan-induced diabetic rabbit model. The nanofibrous mats have been developed using electrospinning and functionalized with growth factors and LL-37 antimicrobial peptide for sustained delivery. Following post 14-day treatment, non-mulberry SF (NMSF)-based dressings healed the wounds faster, in comparison with their mulberry Bombyx mori SF, poly(vinyl alcohol), and control counterparts (p < .01). NMSF-based dressings also supported faster granulation tissue development, angiogenesis, and reepithelialization of wounds. Gene expression study of matrix metalloproteinases and collagen proteins affirmed higher extent of tissue remodelling during the repair process. Furthermore, there was organized extracellular matrix deposition (collagen type I, collagen type III, elastin, and reticulin) and higher wound breaking strength in NMSF compared with other groups after 4 weeks. These results validated the potential of NMSF-based bioactive dressings to regulate extracellular matrix deposition leading to faster and complete repair of chronic diabetic cutaneous wounds.

Dual growth factor loaded nonmulberry silk fibroin/carbon nanofiber composite 3D scaffolds for in vitro and in vivo bone regeneration.

In recent years the potential application of nanocomposite biomaterials in tissue engineering field is gaining importance because of the combined features of all the individual components. A bottom-up approach is acquired in this study to recreate the bone microenvironment. The regenerated silk protein fibroin obtained from nonmulberry tropical tasar Antheraea mylitta species is reinforced with functionalized carbon nano fiber (CNF) and the composite sponges are fabricated using facile green aqueous based method. Biophysical investigations show that the matrices are porous and simultaneously bioactive when incubated in simulated body fluid. The reinforcement of CNF influences the mechanical property of the matrices by increasing the compressive modulus up to 46.54 MPa (∼4.3 times of the control fibroin sponge) in hydrated state, which is higher than the minimum required human trabecular bone modulus (10 MPa). The composite matrices are found to be non-hemolytic as well as cytocompatible. The growth factors (BMP-2 and TGF-ß1) loaded composites show sustained release kinetics and an early attachment, growth, proliferation, and osteogenic differentiation of the osteoblasts and mesenchymal stem cells. The matrices are immunocompatible as evidenced by minimal release of pro-inflammatory cytokines both in vitro and in vivo. In order to support the in vitro study, in vivo analysis of new bone formation within the implants is performed through radiological, µ-CT, fluorochrome labeling and histological analysis, which show statistically better bone formation on growth factor loaded composite scaffolds. The study clearly shows the potential attributes of these composite matrices as an extra cellular matrix for supporting successful osseointegration process.

Localized Immunomodulatory Silk Macrocapsules for Islet-like Spheroid Formation and Sustained Insulin Production.

Pancreatic islet encapsulation in a 3D scaffolding matrix has achieved limited clinical success due to loss of islet function and cell death, shortly after transplantation. Also, transplant-associated inflammatory responses create an unfavorable microenvironment for islet survival. The current study delineates the development of cell-encapsulating immunomodulatory 3D silk scaffolds as bioartificial pancreas (BAP) systems for sustained insulin release. Insulin producing cells were encapsulated inside silk scaffolds with either alginate or agarose for immunoisolation to augment islet survival and function. The scaffolds were extensively characterized for pore architecture, porosity, swelling index, water uptake, and density. Further, suitability of these scaffolds was assessed through diverse in vitro tests, including cell adherence, viability, proliferation, 3D spheroid like pancreatic structures development, glucose stimulated insulin secretion, and macrophage polarization. Rat insulinoma (RIN-5) cells were metabolically active within the macroencapsulates and proliferated up to 2.5-fold over 5 weeks in culture. Cultured cells formed 3D islet-like spheroids spontaneously. Primary islets maintained their function in macroencapsulates with enhanced glucose stimulation index when compared to nonencapsulated islets, 1.2 vs 1.7. RT-qPCR and immunohistochemistry results supported the results obtained from glucose challenge assay. Controlled release profiles of anti-inflammatory cytokine interleukine-4 (IL-4) and dexamethasone evinced their prospective application in reducing local foreign body response and immunosuppression. Released IL-4 was biologically active and polarized M0 macrophages to the M2 phenotype, advocating immunosuppressive function. Reduced inflammatory responses illustrated the biocompatibility of these scaffolds. In conclusion, this novel biomaterial system was successfully used to encapsulate insulin-producing cells with enhanced cell functions. Further development of the system may have potential BAP applications.

Role of non-mulberry silk fibroin in deposition and regulation of extracellular matrix towards accelerated wound healing.

Bombyx mori silk fibroin (BMSF) as biopolymer has been extensively explored in wound healing applications. However, limited study is available on the potential of silk fibroin (SF) from non-mulberry (Antheraea assama and Philosamia ricini) silk variety. Herein, we have developed non-mulberry SF (NMSF) based electrospun mats functionalized with epidermal growth factor (EGF) and ciprofloxacin HCl as potential wound dressing. The NMSF based mats exhibited essential properties of wound dressing like biocompatibility, high water retention capacity (440%), water vapor transmission rate (∼2330gm-2day-1), high elasticity (∼2.6MPa), sustained drug release and antibacterial activity. Functionalized NMSF mats enhanced the proliferation of human dermal fibroblasts and HaCaT cells in vitro as compared to non-functionalized mats (p⩽0.01) showing effective delivery of EGF. Extensive in vivo wound healing assesment demonstrated accelerated wound healing, enhanced re-epithelialization, highly vascularized granulation tissue and higher wound maturity as compared to BMSF based mats. NMSF mats treated wounds showed regulated deposition of mature elastin, collagen and reticulin fibers in the extracellular matrix of skin. Presence of skin appendages and isotropic collagen fibers in the regenerated skin also demonstrated scar-less healing and aesthetic wound repair. STATEMENT OF SIGNIFICANCE: A facile fabrication of a ready-to-use bioactive wound dressing capable of concomitantly accelerating the healing process as well as deposition of the extracellular matrix (ECM) to circumvent further scarring complicacies has become a focal point of research. In this backdrop, our present work is based on non-mulberry silk fibroin (NMSF) electrospun antibiotic loaded semi-occlusive mats, mimicking the ECM of skin in terms of morphology, topology, microporous structure and mechanical stiffness. Regulation of ECM deposition and isotropic orientation evinced the potential of the mat as an instructive platform for skin regeneration. The unique peptide motifs of NMSF assisted the augmented recruitment of fibroblast, keratinocytes and endothelial cells leading to accelerated wound healing. Early progression of mature granulation, faster re-epithelialization and angiogenesis in the wounds in in vivo rabbit model forwarded the blended nanofibrous mats of NMSF and PVA ferrying EGF, apt for scarless healing.

Influence of single and binary doping of strontium and lithium on in vivo biological properties of bioactive glass scaffolds.

Effects of strontium and lithium ion doping on the biological properties of bioactive glass (BAG) porous scaffolds have been checked in vitro and in vivo. BAG scaffolds were prepared by conventional glass melting route and subsequently, scaffolds were produced by evaporation of fugitive pore formers. After thorough physico-chemical and in vitro cell characterization, scaffolds were used for pre-clinical study. Soft and hard tissue formation in a rabbit femoral defect model after 2 and 4 months, were assessed using different tools. Histological observations showed excellent osseous tissue formation in Sr and Li + Sr scaffolds and moderate bone regeneration in Li scaffolds. Fluorochrome labeling studies showed wide regions of new bone formation in Sr and Li + Sr doped samples as compared to Li doped samples. SEM revealed abundant collagenous network and minimal or no interfacial gap between bone and implant in Sr and Li + Sr doped samples compared to Li doped samples. Micro CT of Li + Sr samples showed highest degree of peripheral cancellous tissue formation on periphery and cortical tissues inside implanted samples and vascularity among four compositions. Our findings suggest that addition of Sr and/or Li alters physico-chemical properties of BAG and promotes early stage in vivo osseointegration and bone remodeling that may offer new insight in bone tissue engineering.

Converted marine coral hydroxyapatite implants with growth factors: in vivo bone regeneration.

Herein we report rabbit model in vivo bone regeneration of hydrothermally converted coralline hydroxyapatite (HCCHAp) scaffolds without (group I) and with growth factors namely insulin like growth factor-1 (IGF-1) (group II) and bone morphogenetic protein-2 (BMP-2) (group III). All HCCHAp scaffolds have been characterized for phase purity and morphology before implantation. Calcined marine coral was hydrothermally converted using a mineralizer/catalyst to phase pure HAp retaining original pore structure and geometry. After sintering at 1250°C, the HCCHAp found to have ~87% crystallinity, 70-75% porosity and 2±0.5MPa compressive strength. In vitro growth factor release study at day 28 revealed 77 and 98% release for IGF-1 and BMP-2, respectively. The IGF-1 release was more sustained than BMP-2. In vivo bone healing of different groups was compared using chronological radiology, histological evaluations, scanning electron microscopy and fluorochrome labeling up to 90days of implantation. In vivo studies showed substantial reduction in radiolucent zone and decreased radiodensity of implants in group II followed by group III and group I. These observations clearly suggest in-growth of osseous tissue, initiation of bone healing and complete union between implants and natural bone in group II implants. A statistical score sheet based on histological observations showed an excellent osseous tissue formation in group II and group III scaffolds and moderate bone regeneration in group I scaffolds.

In vitro and in vivo evaluation of the marine sponge skeleton as a bone mimicking biomaterial.

This investigation was carried out to identify and characterize marine sponges as potential bioscaffolds in bone tissue engineering. The marine sponge (Biemna fortis) samples were collected from the rocky intertidal region of Anjuna, Goa, India, freeze-dried and converted to pure cristobalite at low temperature. After thorough evaluation of sponge samples by DTA-TGA thermography, XRD, FTIR, SEM and cell cytotoxicity by MTT assay, bare sponge scaffolds were fabricated by firing at 1190 °C. These scaffolds were loaded with growth factors (IGF-1 and BMP-2), checked for quasi-dynamic in vitro release kinetics and finally implanted into femoral bone defects in rabbits for up to 90 days, by keeping an empty defect as a control. The in vivo bone healing process was evaluated and compared using chronological radiology, histology, SEM and fluorochrome labeling studies. SEM revealed that the sponge skeleton possesses a collagenous fibrous network consisting of highly internetworked porosity in the size range of 10-220 µm. XRD and FTIR analysis showed a cristobalite phase with acicular crystals of high aspect ratio, and crystallinity was found to increase from 725 to 1190 °C. MTT assay demonstrated the non-cytotoxicity of the samples. A combination of burst and sustained release profile was noticed for both the growth factors and about 74.3% and 83% total release at day 28. In the radiological, histological, scanning electron microscopy and fluorochrome labeling analysis, the IGF-1 impregnated converted sponge scaffold promoted excellent osseous tissue formation followed by the BMP-2 loaded and bare one. These observations suggest that the marine sponge alone and in combination with growth factors is a promising biomaterial for bone repair and bone augmentation.

Protein growth factors loaded highly porous chitosan scaffold: a comparison of bone healing properties.

Present study aimed to investigate and compare effectiveness of porous chitosan alone and in combination with insulin like growth factor-1 (IGF-1) and bone morphogenetic protein-2 (BMP-2) in bone healing. Highly porous (85±2%) with wide distribution of macroporous (70-900 µm) chitosan scaffolds were fabricated as bone substitutes by employing a simple liquid hardening method using 2% (w/v) chitosan suspension. IGF-1 and BMP-2 were infiltrated using vacuum infiltration with freeze drying method. Adsorption efficiency was found to be 87±2 and 90±2% for BMP-2 and IGF-1 respectively. After thorough material characterization (pore details, FTIR and SEM), samples were used for subsequent in vivo animal trial. Eighteen rabbit models were used to evaluate and compare control (chitosan) (group A), chitosan with IGF-1 (group B) and chitosan with BMP-2 (group C) in the repair of critical size bone defect in tibia. Radiologically, there was evidence of radiodensity in defect area from 60th day (initiated on 30th day) in groups B and C as compared to group A and attaining nearly bony density in most of the part at day 90. Histological results depicted well developed osteoblastic proliferation around haversian canal along with proliferating fibroblast, vascularization and reticular network which was more pronounced in group B followed by groups C and A. Fluorochrome labeling and SEM studies in all groups showed similar outcome. Hence, porous chitosan alone and in combination with growth factors (GFs) can be successfully used for bone defect healing with slight advantage of IGF-1 in chitosan samples.