RESUMEN
Light is a versatile tool to remotely activate molecules adsorbed on a surface, for example, to trigger their polymerization. Here, we explore the spatial distribution of light-induced chemical reactions on a Au(111) surface. Specifically, the covalent on-surface polymerization of an anthracene derivative in the submonolayer coverage range is studied. Using scanning tunneling microscopy and X-ray photoemission spectroscopy, we observe a substantial increase of the local molecular coverage with the sample illumination time at the center of the laser spot. We find that the interplay between thermally induced diffusion and the reduced mobility of reaction products steers the accumulation of material. Moreover, the debromination of the adsorbed species never progresses to completion within the experiment time, despite a long irradiation of many hours.
RESUMEN
The intrinsic stability of the 5 V LiCoPO4-LiCo2P3O10 thin-film (carbon-free) cathode material coated with MoO3 thin layer is studied using a comprehensive synchrotron electron spectroscopy in situ approach combined with first-principle calculations. The atomic-molecular level study demonstrates fully reversible electronic properties of the cathode after the first electrochemical cycle. The polyanionic oxide is not involved in chemical reactions with the fluoroethylene-containing liquid electrolyte even when charged to 5.1 V vs Li+/Li. The high stability of the cathode is explained on the basis of the developed energy level model. In contrast, the chemical composition of the cathode-electrolyte interface evolves continuously by involving MoO3 in the decomposition reaction with consequent leaching of oxide from the surface. The proposed mechanisms of chemical reactions are attributed to external electrolyte oxidation via charge transfer from the relevant electron level to the MoO3 valence band state and internal electrolyte oxidation via proton transfer to the solvents. This study provides a deeper insight into the development of both a doping strategy to enhance the electronic conductivity of high-voltage cathode materials and an efficient surface coating against unfavorable interfacial chemical reactions.
RESUMEN
On-surface polymerization is a powerful bottom-up approach that allows for the growth of covalent architectures with defined properties using the two-dimensional confinement of a highly defined single-crystal surface. Thermal heating is the preferred approach to initiate the reaction, often via cleavage of halogen substituents from the molecular building blocks. Light represents an alternative stimulus but has, thus far, only rarely been used. Here, we present a direct comparison of on-surface polymerization of dibromo-anthracene molecules, induced either thermally or by light, and study the differences between the two approaches. Insight is obtained by a combination of scanning tunneling microscopy, locally studying the polymer shape and size, and X-ray photoelectron spectroscopy, which identifies bond formation by averaging over large surface areas. While the polymer length increases slowly with the sample heating temperature, illumination promotes only the formation of short covalent structures, independent of the duration of light exposure. Moreover, irradiation with UV light at different sample temperatures highlights the important role of molecular diffusion across the surface.
RESUMEN
Impurity doping in silicon (Si) ultra-large-scale integration is one of the key challenges which prevent further device miniaturization. Using ultraviolet photoelectron spectroscopy and X-ray absorption spectroscopy in the total fluorescence yield mode, we show that the lowest unoccupied and highest occupied electronic states of ≤3 nm thick SiO2-coated Si nanowells shift by up to 0.2 eV below the conduction band and ca. 0.7 eV below the valence band edge of bulk silicon, respectively. This nanoscale electronic structure shift induced by anions at surfaces (NESSIAS) provides the means for low-nanoscale intrinsic Si (i-Si) to be flooded by electrons from an external (bigger, metallic) reservoir, thereby getting highly electron- (n-) conductive. While our findings deviate from the behavior commonly believed to govern the properties of silicon nanowells, they are further confirmed by the fundamental energy gap as per nanowell thickness when compared against published experimental data. Supporting our findings further with hybrid density functional theory calculations, we show that other group IV semiconductors (diamond, Ge) do respond to the NESSIAS effect in accord with Si. We predict adequate nanowire cross-sections (X-sections) from experimental nanowell data with a recently established crystallographic analysis, paving the way to undoped ultrasmall silicon electronic devices with significantly reduced gate lengths, using complementary metal-oxide-semiconductor-compatible materials.
RESUMEN
In the last years, intense efforts have been made in order to obtain colloidal-based systems capable of pointing out the presence of melamine in food samples. In this work, we reported about the recognition of melamine in aqueous solution, using gold nanoparticles stabilized with 3-mercapto-1-propanesulfonate (AuNPs-3MPS), with the aim of deepening how the recognition process works. AuNPs were synthesized using a wet chemical reduction method. The synthesized AuNPs-3MPS probe was fully characterized, before and after the recognition process, by both physicochemical (UV-vis, FT-IR, 1H-NMR, DLS and ζ-potential) and morphostructural techniques (AFM, HR-TEM). The chemical and electronic structure was also investigated by SR-XPS. The sensing method is based on the melamine-induced aggregation of AuNPs; the presence of melamine was successfully detected in the range of 2.5-500â¯ppm. The results achieved also demonstrate that negatively charged AuNPs-3MPS are potentially useful for determining melamine contents in aqueous solution. SR-XPS measurements allowed to understand interaction mechanism between the probe and the analyte. The presence of sulfonate groups allows a mutual interaction mediated by electrostatic bonds between nanoparticles surface thiols and positively charged amino groups of melamine molecules.
Asunto(s)
Oro , Nanopartículas del Metal , Leche , Espectroscopía Infrarroja por Transformada de Fourier , Compuestos de Sulfhidrilo , TriazinasRESUMEN
Graphene nanoribbons (GNRs) are at the frontier of research on graphene materials since the 1D quantum confinement of electrons allows for the opening of an energy gap. GNRs of uniform and well-defined size and shape can be grown using the bottom-up approach, i.e. by surface assisted polymerization of aromatic hydrocarbons. Since the electronic properties of the nanostructures depend on their width and on their edge states, by careful choice of the precursor molecule it is possible to design GNRs with tailored properties. A key issue for their application in nanoelectronics is their stability under operative conditions. Here, we characterize pristine and oxygen-exposed 1.0 nm wide GNRs with a well-defined mixed edge-site sequence (two zig-zag and one armchair) synthesized on Ag(110) from 1,6-dibromo-pyrene precursors. The energy gap and the presence of quantum confined states are investigated by scanning tunneling spectroscopy. The effect of oxygen exposure under ultra-high vacuum conditions is inferred from scanning tunneling microscopy images and photoemission spectra. Our results demonstrate that oxygen exposure deeply affects the overall system by interacting both with the nanoribbons and with the substrate; this factor must be considered for supported GNRs under operative conditions.
RESUMEN
The electronic structures of V-intercalated TiSe2 and substitutionally doped dichalcogenides Ti1-xVxSe2 have been studied using soft X-ray photoelectron, resonant photoelectron, and absorption spectroscopies. In the case of the substitution of Ti by V, the formation of coherently oriented structural fragments VSe2 and TiSe2 is observed and a small charge transfer between these fragments is found. Intercalation of the V atoms into TiSe2 leads to charge transfer from the V atoms to the Ti atoms with the formation of covalent complexes Ti-Se3-V-Se3-Ti.
RESUMEN
Iron is an essential nutrient for nearly all forms of life, although scarcely available due to its poor solubility in nature and complex formation in higher eukaryotes. Microorganisms have evolved a vast array of strategies to acquire iron, the most common being the production of high-affinity iron chelators, termed siderophores. The opportunistic bacterial pathogen Pseudomonas aeruginosa synthesizes and secretes two siderophores, pyoverdine (PVD) and pyochelin (PCH), characterized by very different structural and functional properties. Due to its chemical similarity with Fe(III), Ga(III) interferes with several iron-dependent biological pathways. Both PVD and PCH bind Fe(III) and Ga(III). However, while the Ga-PCH complex is more effective than Ga(III) in inhibiting P. aeruginosa growth, PVD acts as a Ga(III) scavenger and protects bacteria from Ga(III) toxicity. To gain more insight into the different outcomes of the biological paths observed for the Fe(III) and Ga(III)-siderophore complexes, better knowledge is needed of their coordination geometries that directly influence the metal complexes chemical stability. The valence state and coordination geometry of the Ga-PCH and Fe-PCH complexes has recently been investigated in detail; as for PVD complexes, several NMR structural studies of Ga(III)-PVD are reported in the literature, using Ga(III) as a diamagnetic isosteric substitute for Fe(III). In this work, we applied up-to-date spectroscopic techniques as synchrotron-radiation-induced X-ray photoelectron spectroscopy (SR-XPS) and X-ray absorption fine structure (XAFS) spectroscopy coupled with molecular modeling to describe the electronic structure and coordination chemistry of Fe and Ga coordinative sites in PVD metal complexes. These techniques allowed us to unambiguously determine the oxidation state of the coordinative ions and to gather interesting information about the similarities and differences between the two coordination compounds as induced by the different metal.
RESUMEN
The space between a metal surface and a two-dimensional cover can be regarded as a nanoreactor, where confined molecule adsorption and surface reactions may occur. In this work, we report CO intercalation and reactivity between a graphene-hexagonal boron nitride (h-BNG) heterostructure and Pt(111). By employing high resolution X-ray photoemission spectroscopy (XPS) we demonstrate the molecular intercalation of the full h-BNG overlayer and stabilization of a dense R23.4°-13CO layer on Pt(111) under ultra-high vacuum at room temperature. We provide experimental evidence of a weakened CO-metal bond due to the confinement effects of the 2D cover. Temperature-programmed XPS results reveal that CO desorption is kinetically delayed and occurs at a higher temperature than on bare Pt(111). Moreover, CO partially reacts with the h-BNG layer to form boron-oxide species, which affect repeated CO intercalation. Finally, we found that the properties of the system towards interaction with CO can be considerably recovered using high temperature treatment.
RESUMEN
The structure and electronic properties of carbon-based nanostructures obtained by metal surface assisted synthesis is highly dependent on the nature of the precursor molecule. Here, we report on a combined scanning tunneling microscopy, soft X-ray spectroscopy and density functional theory investigation on the surface assisted polymerization of Br-corannulene at Ag(110) and on the possibility of building a mesh of π-conjugated polymers starting from buckyball shaped molecules. Indeed, the corannulene units form one-molecule-wide ribbons in which the natural concavity of the precursor molecule is maintained. These C-based nanostructures are corrugated and merge into a covalent network on the surface.
RESUMEN
Silver nanoparticles capped with 3-mercapto-1propanesulfonic acid sodium salt (AgNPs-3MPS), able to interact with Ni2+ or Co2+, have been prepared to detect these heavy metal ions in water. This system works as an optical sensor and it is based on the change of the intensity and shape of optical absorption peak due to the surface plasmon resonance (SPR) when the AgNPs-3MPS are in presence of metals ions in a water solution. We obtain a specific sensitivity to Ni2+ and Co2+ up to 500 ppb (part per billion). For a concentration of 1 ppm (part per million), the change in the optical absorption is strong enough to produce a colorimetric effect on the solution, easily visible with the naked eye. In addition to the UV-VIS characterizations, morphological and dimensional studies were carried out by transmission electron microscopy (TEM). Moreover, the systems were investigated by means of dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and high-resolution X-ray photoelectron spectroscopy (HR-XPS). On the basis of the results, the mechanism responsible for the AgNPs-3MPS interaction with Ni2+ and Co2+ (in the range of 0.5â»2.0 ppm) looks like based on the coordination compounds formation.
RESUMEN
The performance of devices containing colloidal quantum dot (CQD) films is strongly dependent on the surface chemistry of the CQDs they contain. Multistep surface treatments, which combine two or more strategies, are important for creating films with high carrier mobility that are well passivated against trap states and oxidation. Here, we examine the effect of a number of these surface treatments on PbS CQD films, including cation exchange to form PbS/CdS core/shell CQDs, and solid-state ligand-exchange treatments with Cl, Br, I, and 1,2-ethanedithiol (EDT) ligands. Using laboratory-based and synchrotron-radiation-excited X-ray photoelectron spectroscopy (XPS), we examine the compositions of the surface layer before and after treatment, and correlate this with the performance data and stability in air. We find that halide ion treatments may etch the CQD surfaces, with detrimental effects on the air stability and solar cell device performance caused by a reduction in the proportion of passivated surface sites. We show that films made up of PbS/CdS CQDs are particularly prone to this, suggesting Cd is more easily etched from the surface than Pb. However, by choosing a less aggressive ligand treatment, a good coverage of passivators on the surface can be achieved. We show that halide anions bind preferentially to surface Pb (rather than Cd). By isolating the part of XPS signal originating from the topmost surface layer of the CQD, we show that air stability is correlated with the total number of passivating agents (halide + EDT + Cd) at the surface.
RESUMEN
The effects of Cr on local environment and electronic structure of rutile TiO2 are studied combining theoretical and experimental approaches. Neutral and negatively charged substitutional Cr impurities CrTi0 and CrTi1- as well as Cr-oxygen vacancy complex 2CrTi + VO are studied by the density functional theory (DFT) within the generalized gradient approximation (GGA) of Perdew-Burke-Ernzerhof (PBE) functional. Experimental results based on X-Ray absorption spectroscopy (XAS) and X-Ray photoelectron spectroscopy (XPS) performed on Cr doped TiO2 at the Synchrotron facility were compared to the theoretical results. It is shown that the electrons of the oxygen vacancy tend to be localized at the t2g states of the Cr ions in order to reach the stable oxidation state of Cr3+. Effects of Cr on crystal field (CF) and structural distortions in the rutile TiO2 cell were analyzed by the DFT calculations and XAS spectra revealing that the CF and tetragonal distortions in TiO2 are very sensitive to the concentration of Cr.
RESUMEN
The nature of the oxygen species active in ethylene epoxidation is a long-standing question. While the structure of the oxygen species that participates in total oxidation (nucleophilic oxygen) is known the atomic structure of the selective species (electrophilic oxygen) is still debated. Here, we use both in situ and UHV X-ray Photoelectron Spectroscopy (XPS) to study the interaction of oxygen with a silver surface. We show experimental evidence that the unreconstructed adsorbed atomic oxygen (Oads) often argued to be active in epoxidation has a binding energy (BE) ≤ 528 eV, showing a core-level shift to lower BE with respect to the O-reconstructions, as previously predicted by DFT. Thus, contrary to the frequent assignment, adsorbed atomic oxygen cannot account for the electrophilic oxygen species with an O 1s BE of 530-531 eV, thought to be the active species in ethylene epoxidation. Moreover, we show that Oads is present at very low O-coverages during in situ XPS measurements and that it can be obtained at slightly higher coverages in UHV at low temperature. DFT calculations support that only low coverages of Oads are stable. The highly reactive species is titrated by background gases even at low temperature in UHV conditions. Our findings suggest that at least two different species could participate in the partial oxidation of ethylene on silver.
RESUMEN
Photoelectrochemical water splitting is a promising approach for renewable production of hydrogen from solar energy and requires interfacing advanced water-splitting catalysts with semiconductors. Understanding the mechanism of function of such electrocatalysts at the atomic scale and under realistic working conditions is a challenging, yet important, task for advancing efficient and stable function. This is particularly true for the case of oxygen evolution catalysts and, here, we study a highly active Co3O4/Co(OH)2 biphasic electrocatalyst on Si by means of operando ambient-pressure X-ray photoelectron spectroscopy performed at the solid/liquid electrified interface. Spectral simulation and multiplet fitting reveal that the catalyst undergoes chemical-structural transformations as a function of the applied anodic potential, with complete conversion of the Co(OH)2 and partial conversion of the spinel Co3O4 phases to CoO(OH) under precatalytic electrochemical conditions. Furthermore, we observe new spectral features in both Co 2p and O 1s core-level regions to emerge under oxygen evolution reaction conditions on CoO(OH). The operando photoelectron spectra support assignment of these newly observed features to highly active Co4+ centers under catalytic conditions. Comparison of these results to those from a pure phase spinel Co3O4 catalyst supports this interpretation and reveals that the presence of Co(OH)2 enhances catalytic activity by promoting transformations to CoO(OH). The direct investigation of electrified interfaces presented in this work can be extended to different materials under realistic catalytic conditions, thereby providing a powerful tool for mechanism discovery and an enabling capability for catalyst design.
RESUMEN
Achieving control of the surface chemistry of colloidal quantum dots (CQDs) is essential to fully exploit their properties in solar cells, but direct measurement of the chemistry and electronic structure in the outermost atomic layers is challenging. Here we probe the surface oxidation and passivation of cation-exchanged PbS/CdS core/shell CQDs with sub nm-scale precision using synchrotron-radiation-excited depth-profiling photoemission. We investigate the surface composition of the topmost 1-2.5 nm of the CQDs as a function of depth, for CQDs of varying CdS shell thickness, and examine how the surface changes after prolonged air exposure. We demonstrate that the Cd is localized at the surface of the CQDs. The surface-localized products of oxidation are identified, and the extent of oxidation quantified. We show that oxidised sulfur species are progressively eliminated as Cd replaces Pb at the surface. A sub-monolayer surface 'decoration' of Cd is found to be effective in passivating the CQDs. We show that the measured energy-level alignments at PbS/CdS colloidal quantum dot surfaces differ from those expected on the basis of bulk band offsets, and are strongly affected by the oxidation products. We develop a model for the passivating action of Cd. The optimum shell thickness (of around 0.1 nm, previously found to give maximised power conversion efficiency in PbS/CdS solar cells) is found to correspond to a trade-off between the rate of oxidation and the introduction of a surface barrier to charge transport.
RESUMEN
In this paper, we study the magnetic and chemical properties of Fe/graphene vertically stacked ultrathin films by means of X-ray magnetic circular dichroism and X-ray photoelectron spectroscopy. We compare two systems: an iron layer deposited directly on top of the Pt(111) surface, and an intercalated Fe film sandwiched between graphene and Pt(111). The system composed of a submonolayer Fe deposited directly on Pt(111) maintains an out-of-plane easy magnetization axis, even if it has been covered by graphene that quenches effectively the magnetic orbital moment of Fe. However, when the Fe coverage is increased above 1 ML the easy magnetization axis flips in the in-plane direction.
RESUMEN
By a combination of scanning tunneling microscopy, X-ray spectroscopic techniques and density functional theory calculations, we prove the formation of extended patterns of parallel, graphene nanoribbons with alternate zig-zag and armchair edges and selected width by surface-assisted Ullmann coupling polymerization and dehydrogenation of 1,6-dibromopyrene (C16H8Br2). Besides the relevance of these nanostructures for their possible application in nanodevices, we demonstrate the peculiarity of halogenated pyrene derivatives for the formation of nanoribbons, in particular on Ag(110). These results open the possibility of tuning the shape and dimension of nanoribbons (and hence the correlated electronic properties) by choosing suitably tailored or on-purpose designed molecular precursors.
RESUMEN
The mesenchymal state in cancer is usually associated with poor prognosis due to the metastatic predisposition and the hyper-activated metabolism. Exploiting cell glucose metabolism we propose a new method to detect mesenchymal-like cancer cells. We demonstrate that the uptake of glucose-coated magnetic nanoparticles (MNPs) by mesenchymal-like cells remains constant when the glucose in the medium is increased from low (5.5 mM) to high (25 mM) concentration, while the MNPs uptake by epithelial-like cells is significantly reduced. These findings reveal that the glucose-shell of MNPs plays a major role in recognition of cells with high-metabolic activity. By selectively blocking the glucose transporter 1 channels we showed its involvement in the internalization process of glucose-coated MNPs. Our results suggest that glucose-coated MNPs can be used for metabolic-based assays aimed at detecting cancer cells and that can be used to selectively target cancer cells taking advantage, for instance, of the magnetic-thermotherapy.
Asunto(s)
Neoplasias de la Mama/tratamiento farmacológico , Transportador de Glucosa de Tipo 1/genética , Glucosa/administración & dosificación , Nanopartículas de Magnetita/administración & dosificación , Neoplasias de la Mama/diagnóstico , Neoplasias de la Mama/patología , Células Epiteliales/efectos de los fármacos , Células Epiteliales/patología , Femenino , Glucosa/química , Glucosa/metabolismo , Transportador de Glucosa de Tipo 1/antagonistas & inhibidores , Humanos , Hipertermia Inducida , Células MCF-7 , Nanopartículas de Magnetita/química , Mesodermo/metabolismo , Mesodermo/patologíaRESUMEN
The final fate of nano-scaled drug delivery systems into the body is highly affected by their interaction with proteins in biological fluids (serum, plasma, etc.). Nanocarriers dispersed in biological fluids bear a protein "corona" that covers their surface. Thus, it is extremely important to evaluate the drug release efficiency also in the biological environment where protein-nanocarrier complexes are formed. The purpose of this work is to determine how drug release from lipid vesicle carriers is influenced by the interaction with serum proteins, highlighting the importance to test the effectiveness of such systems in the biological milieu. In particular, this paper describes the magnetically triggered release behaviour of magnetoliposomes (MLs) dispersed both in aqueous physiological buffer and in bovine serum at two different concentrations (10% and 55% v/v) upon exposure to a low-frequency alternating magnetic field (LF-AMF). We studied the release from MLs loaded with two types of magnetic nanoparticles (MNPs): citrate coated Fe3O4 and oleic acid coated γ-Fe2O3. The permeability in the above-mentioned fluids was evaluated in terms of the fluorescence self-quenching of carboxyfluorescein (CF) entrapped inside the liposome aqueous pool. The results showed a strong reduction of the release in biological fluids, in particular at high serum concentration. We related this decrease to the formation of protein-liposome complexes that, under LF-AMF exposure, are subjected to destabilization and tend to form aggregates. Our results clearly highlight the importance of testing the release efficiency of self-assembled drug delivery systems in biological fluids, in order to understand their behaviour in the presence of proteins and biomolecules.