Extracellular collagenase isolated from Streptomyces antibioticus UFPEDA 3421: purification and biochemical characterization.

Collagenases are proteases able to degrade native and denatured collagen, with broad applications such as leather, food, and pharmaceutical industries. The aim of this research was to purify and characterize a collagenase from Streptomyces antibioticus. In the present work, the coffee ground substrate provided conditions to obtaining high collagenase activity (377.5 U/mL) using anion-exchange DEAE-Sephadex G50 chromatographic protocol. SDS-PAGE revealed the metallo-collagenase with a single band of 41.28 kDa and was able to hydrolyzed type I and type V collagen producing bioactive peptides that delayed the coagulation time. The enzyme activity showed stability across a range of pH (6.0-11) and temperature (30-55 °C) with optima at pH 7.0 and 60 °C, respectively. Activators include Mg+2, Ca+2, Na+, K+, while full inhibition was given by other tested metalloproteinase inhibitors. Kinetic parameters (Km of 27.14 mg/mol, Vmax of 714.29 mg/mol/min, Kcat of 79.9 s-1 and Kcat/Km of 2.95 mL/mg/s) and thermodynamic parameters (Ea of 65.224 kJ/mol, ΔH of 62.75 kJ/mol, ΔS of 1.96 J/mol, ΔG of 62.16 kJ/mol, ΔGE-S of 8.18 kJ/mol and ΔGE-T of -2.64 kJ/mol) were also defined. Coffee grounds showed to be an interesting source to obtaining a collagenase able to produce bioactive peptides with anticoagulant activity.

A novel ß-fructofuranosidase produced by Penicillium citreonigrum URM 4459: purification and biochemical features.

Fructooligosaccharides (FOS) are prebiotics of interest to the food industry. These compounds can be produced through the transfructosylation reaction by the enzyme fructofuranosidase. This enzyme is widely produced by fungi in a medium rich in sugar. Therefore, in this work, the main objectives were production, purification, biochemical characterization of a novel fructofuranosidase enzyme by Penicillium citreonigrum URM 4459 and synthesize and evaluate the antibacterial potential of fructooligosaccharides. With respect to sucrose hydrolysis, the optimal pH was 5.5, the apparent Km for purified FFase was 3.8 mM, the molecular mass was 43.0 kDa, estimated by gel filtration on Superdex increase G75 controlled by AKTA Avant 25 and confirmed by 10% SDS-PAGE under denaturing condition. Also, the isoelectric point was 4.9. The fractions obtained with enzymatic activities, both stable at acidic pH and high temperatures, as well as being able to produce FOS. Regarding antibacterial activity, the FOS produced in this study showed better results than commercial FOS and other carbon sources. Thus, this work presents relevant data for the use of P. citreonigum to produce fructofuranosidase and consequently FOS and can be used in the food and pharmaceutical industry.

Purification, biochemical characterization and fibrinolytic potential of proteases produced by bacteria of the genus Bacillus: a systematic literature review.

Thrombosis is a hematological disorder characterized by the formation of intravascular thrombi, which contributes to the development of cardiovascular diseases. Fibrinolytic enzymes are proteases that promote the hydrolysis of fibrin, promoting the dissolution of thrombi, contributing to the maintenance of adequate blood flow. The characterization of new effective, safe and low-cost fibrinolytic agents is an important strategy for the prevention and treatment of thrombosis. However, the development of new fibrinolytics requires the use of complex methodologies for purification, physicochemical characterization and evaluation of the action potential and toxicity of these enzymes. In this context, microbial enzymes produced by bacteria of the Bacillus genus are promising and widely researched sources to produce new fibrinolytics, with high thrombolytic potential and reduced toxicity. Thus, this review aims to provide a current and comprehensive understanding of the different Bacillus species used for the production of fibrinolytic proteases, highlighting the purification techniques, biochemical characteristics, enzymatic activity and toxicological evaluations used.

Immobilization of fibrinolytic protease from Mucor subtilissimus UCP 1262 in magnetic nanoparticles.

This work reports the immobilization of a fibrinolytic protease (FP) from Mucor subtilissimus UCP 1262 on Fe3O4 magnetic nanoparticles (MNPs) produced by precipitation of FeCl3·6H2O and FeCl2·4H2O, coated with polyaniline and activated with glutaraldehyde. The FP was obtained by solid state fermentation, precipitated with 40-60% ammonium sulfate, and purified by DEAE-Sephadex A50 ion exchange chromatography. The FP immobilization procedure allowed for an enzyme retention of 52.13%. The fibrinolytic protease immobilized on magnetic nanoparticles (MNPs/FP) maintained more than 60% of activity at a temperature of 40 to 60 °C and at pH 7 to 10, when compared to the non-immobilized enzyme. MNPs and MNPs/FP did not show any cytotoxicity against HEK-293 and J774A.1 cells. MNPs/FP was not hemolytic and reduced the hemolysis induced by MNPs from 2.07% to 1.37%. Thrombus degradation by MNPs/FP demonstrated that the immobilization process guaranteed the thrombolytic activity of the enzyme. MNPs/FP showed a total degradation of the γ chain of human fibrinogen within 90 min. These results suggest that MNPs/FP may be used as an alternative strategy to treat cardiovascular diseases with a targeted release through an external magnetic field.

Evaluation of the influence of temperature on the protein-tannic acid complex.

Precipitation of blood products from plasma fractionation has played a fundamental role in the industrial purification of important therapeutic products. Only a few studies have been reported by using tannins as proteins precipitant agent from whole plasma while, several conditions have been analyzed. Here, we decided to verify the effect of the temperature on the precipitation process of plasma proteins using tannic acid (TA). Plasma proteins were precipitated with tannic acid by using different temperature incubations. Subsequently, the protein-TA complex was analyzed by SDS-PAGE and quantified. In addition, the protein activity of the complex was measured after heating, as well as the structural changes of the complexes were accompanied by thermogravimetric analysis, differential scanning calorimetry and circular dichroism. In all conditions tested, tannic acid was able to precipitate without selectively separating the proteins in the mixture by using different temperatures during the precipitation process. Furthermore, the protein concentration from the plasma precipitate was not affected by different temperatures and the plasma precipitate was able to dissolve fibrin clots in vitro.

Lovastatin producing by wild strain of Aspergillus terreus isolated from Brazil.

Lovastatin is a drug in the statin class which acts as a natural inhibitor of 3-hydroxy-3-methylglutaryl, a coenzyme reductase reported as being a potential therapeutic agent for several diseases: Alzheimer's, multiple sclerosis, osteoporosis and due to its anti-cancer properties. Aspergillus terreus is known for producing a cholesterol reducing drug. This study sets out to evaluate the production of lovastatin by Brazilian wild strains of A. terreus isolated from a biological sample and natural sources. Carbon and nitrogen sources and the best physicochemical conditions using factorial design were also evaluated. The 37 fungal were grown to produce lovastatin by submerged fermentation. A. terreus URM5579 strain was the best lovastatin producer with a level of 13.96 mg/L. Soluble starch and soybean flour were found to be the most suitable substrates for producing lovastatin (41.23 mg/L) and biomass (6.1 mg/mL). The most favorable production conditions were found in run 16 with 60 g/L soluble starch, 15 g/L soybean flour, pH 7.5, 200 rpm and maintaining the solution at 32 °C for 7 days, which led to producing 100.86 mg/L of lovastatin and 17.68 mg/mL of biomass. Using natural strains and economically viable substrates helps to optimize the production of lovastatin and promote its use.

Fibrinolytic enzyme from Arthrospira platensis cultivated in medium culture supplemented with corn steep liquor.

Artrhospira (Spirulina) platensis produced fibrinolytic enzyme under mixotrophic conditions using corn steep liquor (CSL). The enzyme was extracted, purified by combination of two chromatographic techniques and biochemically characterized. Maximum fibrinolytic production (268.14 U mg-1) was obtained using liquid medium culture composed by 0.2% CLS after 10th day of cultivation. Fibrinolytic activity was higher when extracted by homogenization methods and was purified 32.72-fold with specific activity of 7988 U mg-1. Fibrin zymography showed an active band, indicated acts as a plasmin-like protein with molecular weight of 72 kDa. Fibrinolytic enzyme have optimum pH of 6.0, stable in the range of 6.0 to 10.0 during 24 h and optimum temperature at 40 °C with a stability below 50 °C. Fibrinolytic enzyme is a serine metalloprotease by to be enhanced by Fe2+ and inhibited by PMSF. The enzyme has higher enzymatic activity than most other fibrinolytic enzymes and is stable at temperature and pH human physiological. Overall, the fibrinolytic enzyme from A. platensis has attractive biochemical properties to potential applications in the treatment of thrombosis.

Purification of a lectin from Cratylia mollis crude extract seed by a single step PEG/phosphate aqueous two-phase system.

The partitioning and purification of lectins from the crude extract of Cratylia mollis seeds (Cramoll 1,4) was investigated in aqueous two-phase systems (ATPS). A factorial design model (24) was used to evaluate the influence of polyethylene glycol (PEG) molar mass (1500-8000 g/mol), PEG concentration (12.5-17.5% w/w), phosphate (10-15% w/w) concentration, and pH (6-8) on the differential partitioning, purification factor, and yield of the lectin. Polymer and salt concentration were the most important variables affecting partition of lectin and used to find optimum purification factor by experimental Box-Behnken design together with the response surface methodology (RSM). ATPS showed best conditions composed by 13.9% PEG1500, 15.3% phosphate buffer at pH 6, which ensured purification factor of 4.70. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed a single band of protein with 26.1 kDa. Furthermore, results demonstrated a thermostable lectin presenting activity until 60 °C and lost hemagglutinating activity at 80 °C. According to the obtained data it can be inferred that the ATPS optimization using RSM approach can be applied for recovery and purification of lectins.

Effect of acute exposure in swiss mice (Mus musculus) to a fibrinolytic protease produced by Mucor subtilissimus UCP 1262: An histomorphometric, genotoxic and cytological approach.

The fibrinolytic enzyme produced by Mucor subtilissimus UCP 1262 was obtained by solid fermentation and purified by ion exchange chromatography using DEAE-Sephadex A50. The enzyme toxicity was evaluated using mammalian cell lineages: HEK-293, J774.A1, Sarcoma-180 and PBMCs which appeared to be viable at a level of 80%. The biochemical parameters of the mice treated with an acute dose of enzyme (2000 mg/mL) identified alterations of AST and ALT and the histomorphometric analysis of the liver showed a loss of endothelial cells (P < 0.001). However, these changes are considered minimal to affirm that there was a significant degree of hepatotoxicity. The comet assay and the micronucleus test did not identify damage in the DNA of the erythrocytes of the animals treated. The protease did not degrade the Aα and Bß chains of human and bovine fibrinogens, thus indicating that it does not act as anticoagulant, but rather as a fibrinolytic agent. The assay performed to assess blood biocompatibility shows that at dose of 0.3-5 mg/mL the hemolytic grade is considered insignificant. Moreover, the enzyme did not prolong bleeding time in mice when dosed with 1 mg/kg. These results indicate that this enzyme produced is a potential competitor for developing novel antithrombotic drugs.

Purification, biochemical, and structural characterization of a novel fibrinolytic enzyme from Mucor subtilissimus UCP 1262.

Fibrinolytic proteases are enzymes that degrade fibrin. They provide a promising alternative to existing drugs for thrombolytic therapy. A protease isolated from the filamentous fungus Mucor subtilissimus UCP 1262 was purified in three steps by ammonium sulfate fractionation, ion exchange, and molecular exclusion chromatographies, and characterized biochemically and structurally. The purified protease exhibited a molecular mass of 20 kDa, an apparent isoelectric point of 4.94 and a secondary structure composed mainly of α-helices. Selectivity for N-succinyl-Ala-Ala-Pro-Phe-p-nitroanilide as substrate suggests that this enzyme is a chymotrypsin-like serine protease, whose activity was enhanced by the addition of Cu2+, Mg2+, and Fe2+. The enzyme showed a fibrinolytic activity of 22.53 U/mL at 40 °C and its contact with polyethylene glycol did not lead to any significant alteration of its secondary structure. This protein represents an important example of a novel fibrinolytic enzyme with potential use in the treatment of thromboembolic disorders such as strokes, pulmonary emboli, and deep vein thrombosis.

Purification of a fibrinolytic protease from Mucor subtilissimus UCP 1262 by aqueous two-phase systems (PEG/sulfate).

A fibrinolytic protease from M. subtilissimus UCP 1262 was recovered and partially purified by polyethylene glycol (PEG)/sodium sulfate aqueous two-phase systems (ATPS). The simultaneous influence of PEG molar mass, PEG concentration and sulfate concentration on the enzyme recovery was first investigated using a 2(3) full factorial design, and the Response Surface Methodology used to identify the optimum conditions for enzyme extraction by ATPS. Once the best PEG molar mass for the process had been selected (6000g/mol), a two-factor central composite rotary design was applied to better evaluate the effects of the other two independent variables. The fibrinolytic enzyme was shown to preferentially partition to the bottom phase with a partition coefficient (K) ranging from 0.2 to 0.7. The best results in terms of enzyme purification were obtained with the system formed by 30.0% (w/w) PEG 6000g/mol and 13.2% (w/w) sodium sulfate, which ensured a purification factor of 10.0, K of 0.2 and activity yield of 102.0%. SDS-PAGE and fibrin zymography showed that the purified protease has a molecular mass of 97kDa and an apparent isoelectric point of 5.4. When submitted to assays with different substrates and inhibitors, it showed selectivity for succinyl-l-ala-ala-pro-l-phenylalanine-p-nitroanilide and was almost completely inhibited by phenylmethylsulfonyl fluoride, behaving as a chymotrypsin-like protease. At the optimum temperature of 37°C, the enzyme residual activity was 94 and 68% of the initial one after 120 and 150min of incubation, respectively. This study demonstrated that M. subtilissimus protease has potent fibrinolytic activity compared with similar enzymes produced by solid-state fermentation, therefore it may be used as an agent for the prevention and therapy of thrombosis. Furthermore, it appears to have the advantages of low cost production and simple purification.