miR-214 is Stretch-Sensitive in Aortic Valve and Inhibits Aortic Valve Calcification.

miR-214 has been recently found to be significantly downregulated in calcified human aortic valves (AVs). ER stress, especially the ATF4-mediated pathway, has also been shown to be significantly upregulated in calcific AV disease. Since elevated cyclic stretch is one of the major mechanical stimuli for AV calcification and ATF4 is a validated target of miR-214, we investigated the effect of cyclic stretch on miR-214 expression as well as those of ATF4 and two downstream genes (CHOP and BCL2L1). Porcine aortic valve (PAV) leaflets were cyclically stretched at 15% for 48 h in regular medium and for 1 week in osteogenic medium to simulate the early remodeling and late calcification stages of stretch-induced AV disease, respectively. For both stages, 10% cyclic stretch served as the physiological counterpart. RT-qPCR revealed that miR-214 expression was significantly downregulated during the late calcification stage, whereas the mRNA expression of ATF4 and BCL2L1 was upregulated and downregulated, respectively, during both early remodeling and late calcification stages. When PAV leaflets were statically transfected with miR-214 mimic in osteogenic medium for 2 weeks, calcification was significantly reduced compared to the control mimic case. This implies that miR-214 may have a protective role in stretch-induced calcific AV disease.

Disturbed Flow Increases UBE2C (Ubiquitin E2 Ligase C) via Loss of miR-483-3p, Inducing Aortic Valve Calcification by the pVHL (von Hippel-Lindau Protein) and HIF-1α (Hypoxia-Inducible Factor-1α) Pathway in Endothelial Cells.

Objective- Calcific aortic valve (AV) disease, characterized by AV sclerosis and calcification, is a major cause of death in the aging population; however, there are no effective medical therapies other than valve replacement. AV calcification preferentially occurs on the fibrosa side, exposed to disturbed flow (d-flow), whereas the ventricularis side exposed to predominantly stable flow remains protected by unclear mechanisms. Here, we tested the role of novel flow-sensitive UBE2C (ubiquitin E2 ligase C) and microRNA-483-3p (miR-483) in flow-dependent AV endothelial function and AV calcification. Approach and Results- Human AV endothelial cells and fresh porcine AV leaflets were exposed to stable flow or d-flow. We found that UBE2C was upregulated by d-flow in human AV endothelial cells in the miR-483-dependent manner. UBE2C mediated OS-induced endothelial inflammation and endothelial-mesenchymal transition by increasing the HIF-1α (hypoxia-inducible factor-1α) level. UBE2C increased HIF-1α by ubiquitinating and degrading its upstream regulator pVHL (von Hippel-Lindau protein). These in vitro findings were corroborated by immunostaining studies using diseased human AV leaflets. In addition, we found that reduction of miR-483 by d-flow led to increased UBE2C expression in human AV endothelial cells. The miR-483 mimic protected against endothelial inflammation and endothelial-mesenchymal transition in human AV endothelial cells and calcification of porcine AV leaflets by downregulating UBE2C. Moreover, treatment with the HIF-1α inhibitor (PX478) significantly reduced porcine AV calcification in static and d-flow conditions. Conclusions- These results suggest that miR-483 and UBE2C and pVHL are novel flow-sensitive anti- and pro-calcific AV disease molecules, respectively, that regulate the HIF-1α pathway in AV. The miR-483 mimic and HIF-1α pathway inhibitors may serve as potential therapeutics of calcific AV disease.

Perspective: The promise of multi-cellular engineered living systems.

Recent technological breakthroughs in our ability to derive and differentiate induced pluripotent stem cells, organoid biology, organ-on-chip assays, and 3-D bioprinting have all contributed to a heightened interest in the design, assembly, and manufacture of living systems with a broad range of potential uses. This white paper summarizes the state of the emerging field of "multi-cellular engineered living systems," which are composed of interacting cell populations. Recent accomplishments are described, focusing on current and potential applications, as well as barriers to future advances, and the outlook for longer term benefits and potential ethical issues that need to be considered.

Biomanufacturing of Therapeutic Cells: State of the Art, Current Challenges, and Future Perspectives.

Stem cells and other functionally defined therapeutic cells (e.g., T cells) are promising to bring hope of a permanent cure for diseases and disorders that currently cannot be cured by conventional drugs or biological molecules. This paradigm shift in modern medicine of using cells as novel therapeutics can be realized only if suitable manufacturing technologies for large-scale, cost-effective, reproducible production of high-quality cells can be developed. Here we review the state of the art in therapeutic cell manufacturing, including cell purification and isolation, activation and differentiation, genetic modification, expansion, packaging, and preservation. We identify current challenges and discuss opportunities to overcome them such that cell therapies become highly effective, safe, and predictively reproducible while at the same time becoming affordable and widely available.

Identification of side- and shear-dependent microRNAs regulating porcine aortic valve pathogenesis.

Aortic valve (AV) calcification is an inflammation driven process that occurs preferentially in the fibrosa. To explore the underlying mechanisms, we investigated if key microRNAs (miRNA) in the AV are differentially expressed due to disturbed blood flow (oscillatory shear (OS)) experienced by the fibrosa compared to the ventricularis. To identify the miRNAs involved, endothelial-enriched RNA was isolated from either side of healthy porcine AVs for microarray analysis. Validation using qPCR confirmed significantly higher expression of 7 miRNAs (miR-100, -130a, -181a/b, -199a-3p, -199a-5p, and -214) in the fibrosa versus the ventricularis. Upon bioinformatics analysis, miR-214 was selected for further investigation using porcine AV leaflets in an ex vivo shear system. Fibrosa and ventricularis sides were exposed to either oscillatory or unidirectional pulsatile shear for 2 days and 3 &7 days in regular and osteogenic media, respectively. Higher expression of miR-214, increased thickness of the fibrosa, and calcification was observed when the fibrosa was exposed to OS compared to the ventricularis. Silencing of miR-214 by anti-miR-214 in whole AV leaflets with the fibrosa exposed to OS significantly increased the protein expression of TGFß1 and moderately increased collagen content but did not affect AV calcification. Thus, miR-214 is identified as a side- and shear-dependent miRNA that regulates key mechanosensitive gene in AV such as TGFß1.

Engineering as a new frontier for translational medicine.

The inclusion of engineering ideas and approaches makes medicine a quantitative and systems-based discipline that facilitates precision diagnostics and therapeutics to improve health care delivery for all.

A study of a three-dimensional PLGA sponge containing natural polymers co-cultured with endothelial and mesenchymal stem cells as a tissue engineering scaffold.

The interaction between vascular endothelial cells (ECs) and vascular smooth muscle cells (VSMCs) in a complex hemodynamic and mechanical environment plays an important role in the control of blood vessel growth and function. Despite the importance of VSMCs, substitutes are needed for vascular therapies. A potential VSMC substitute is human adult bone marrow derived mesenchymal stem cells (hMSCs). In this study, the effect of poly(lactic-co-glycolic acid) (PLGA) scaffolds containing three natural polymers (demineralized bone particles, silk, and small intestine submucosa) on the phenotype of MSCs and SMCs cultured with or without ECs was investigated. The study objective was to create a media equivalent for a tissue engineered blood vessel using PLGA, natural polymers, and MSCs co-cultured with ECs. The PLGA containing the natural polymers silk and SIS showed increased proliferation and cell adhesion. The presence of silk and DBP promoted a MSC phenotype change into a SMC-like phenotype at the mRNA level; however these differences at the protein level were not seen. Additionally, PLGA containing SIS did not induce SMC gene or protein upregulation. Finally, the effect of ECs in combination with the natural polymers was tested. When co-cultured with ECs, the mRNA of SMC specific markers in MSCs and SMCs were increased when compared to SMCs or MSCs alone. However, MSCs, when co-cultured with ECs on PLGA containing silk, exhibited significantly increased α-SMA and calponin expression when compared to PLGA only scaffolds. These results indicate that the natural polymer silk in combination with the co-culture of endothelial cells was most effective at increasing cell viability and inducing a SMC-like phenotype at the mRNA and protein level in MSCs.

A global assessment of stem cell engineering.

Over the last 2 years a global assessment of stem cell engineering (SCE) was conducted with the sponsorship of the National Science Foundation, the National Cancer Institute at the National Institutes of Health, and the National Institute of Standards and Technology. The purpose was to gather information on the worldwide status and trends in SCE, that is, the involvement of engineers and engineering approaches in the stem cell field, both in basic research and in the translation of research into clinical applications and commercial products. The study was facilitated and managed by the World Technology Evaluation Center. The process involved site visits in both Asia and Europe, and it also included several different workshops. From this assessment, the panel concluded that there needs to be an increased role for engineers and the engineering approach. This will provide a foundation for the generation of new markets and future economic growth. To do this will require an increased investment in engineering, applied research, and commercialization as it relates to stem cell research and technology. It also will require programs that support interdisciplinary teams, new innovative mechanisms for academic-industry partnerships, and unique translational models. In addition, the global community would benefit from forming strategic partnerships between countries that can leverage existing and emerging strengths in different institutions. To implement such partnerships will require multinational grant programs with appropriate review mechanisms.

Fluid shear stress pre-conditioning promotes endothelial morphogenesis of embryonic stem cells within embryoid bodies.

Pluripotent embryonic stem cells (ESCs) are capable of differentiating into all mesoderm-derived cell lineages, including endothelial, hematopoietic, and cardiac cell types. Common strategies to direct mesoderm differentiation of ESCs rely on exposing the cells to a series of biochemical and biophysical cues at different stages of differentiation to promote maturation toward specific cell phenotypes. Shear forces that mimic cardiovascular physiological forces can evoke a myriad of responses in somatic and stem cell populations, and have, thus, been studied as a means to direct stem cell differentiation. However, elucidating the effects of shear pre-conditioning on the subsequent vascular differentiation and morphogenesis of ESCs has yet to be examined. In this study, ESC monolayers were subjected to physiological shear (5 dyn/cm(2)) or static conditions for 2 days on collagen IV-coated substrates before initiating embryoid body (EB) differentiation. Immediately after the pre-conditioning period, shear pre-conditioned and statically cultured ESCs exhibited similar morphologies and largely retained a pluripotent phenotype; however, ESCs exposed to fluid shear expressed increased levels of endothelial marker genes Flk-1 (∼3-fold), VE-cadherin (∼3-fold), and PECAM (∼2-fold), compared with statically cultured ESCs. After 7 days of EB culture, ∼70% of EBs formed from shear pre-conditioned ESCs expressed significantly higher levels of endothelial marker genes compared with EBs formed from statically cultured ESCs. Interestingly, unlike EBs formed from statically cultured ESCs, EBs formed from fluid shear stress pre-conditioned ESCs exhibited a centrally localized region of VE-cadherin(+) cells that persisted for at least 10 days of differentiation. These results demonstrate that fluid shear stress pre-conditioning not only promotes ESC endothelial gene expression but also subsequently impacts the organization of endothelial cells within EBs. Together, these studies highlight a novel approach to promote in vitro morphogenesis of developmental vasculogenic models and potentially promote pre-vascularization of tissue-engineered constructs derived from pluripotent stem cells.

Influence of mesenchymal stem cells on the response of endothelial cells to laminar flow and shear stress.

The interactions between endothelial cells (ECs) and smooth muscle cells (SMCs) in a complex hemodynamic environment play an important role in the control of blood vessel function. Since autologous SMCs are not readily available for the tissue engineering of a blood vessel substitute, a substitute for SMCs, such as human adult bone marrow-derived mesenchymal stem cells (MSCs), is needed. The objective of this study was to use a three-dimensional coculture model of the blood vessel wall, comprised of ECs and MSCs, to determine how the presence of MSCs affects EC function. Two vascular coculture models with an EC monolayer were created using type I collagen. All models were exposed to steady laminar flow with a shear stress of 15 dyn/cm(2) for up to 48 h. ECs in both the MSC and SMC coculture models expressed up-regulated EC-specific markers compared to the EC-only control model. The most dramatic difference observed between the two coculture models was in the experiments assessing monocyte adhesion. Here, fewer monocytes bound after laminar shear compared to static conditions; however, the number of bound monocytes was much lower for the EC-MSC coculture model than the EC-SMC coculture model for both static and shear conditions. These results suggest the feasibility of developing a tissue-engineered blood vessel substitute using MSCs as a substitute for SMCs.

Human platelet lysate stimulates high-passage and senescent human multipotent mesenchymal stromal cell growth and rejuvenation in vitro.

BACKGROUND AIMS: Multipotent mesenchymal stromal cells (MSCs) are clinically useful because of their immunomodulatory and regenerative properties, but MSC therapies are limited by the loss of self-renewal and cell plasticity associated with ex vivo expansion culture and, on transplantation, increased immunogenicity from xenogen exposure during culture. Recently, pooled human platelet lysate (hPL) has been used as a culture supplement to promote MSC growth; however, the effects of hPL on MSCs after fetal bovine serum (FBS) exposure remain unknown. METHODS: MSCs were cultured in medium containing FBS or hPL for up to 16 passages, and cell size, doubling time and immunophenotype were determined. MSC senescence was assessed by means of a fluorometric assay for endogenous ß-galactosidase expression. MSCs cultured with FBS for different numbers of passages were switched to hPL conditions to evaluate the ability of hPL to "rescue" the proliferative capacity of MSCs. RESULTS: hPL culture resulted in more rapid cell proliferation at earlier passages (passage 5 or earlier) than remove FBS; by day 4, hPL (5%) yielded an MSC doubling time of 1.28 days compared with 1.52 days in 16% FBS. MSCs cultured first in FBS and switched to hPL proliferated more and demonstrated less ß-galactosidase production and smaller cell sizes than remove MSCs continuously propagated in FBS. CONCLUSIONS: hPL enables rapid expansion of MSCs without adversely affecting immunophenotype. hPL culture of aged and senescent MSCs demonstrated cellular rejuvenation, reflected by decreased doubling time and smaller cell size. These results suggest that expansion of MSCs in hPL after FBS exposure can enhance cell phenotype and proliferative capacity.

Strain magnitude-dependent calcific marker expression in valvular and vascular cells.

Aortic valve disease and atherosclerosis tend to coexist in most patients with cardiovascular disease; however, the causes and mechanisms of disease development in heart valves are still not clearly understood. To understand the contributions of the magnitude of cyclic strain (5% hypotension, 10% physiological, and 15% hypertension) in calcification, we used a model system of tissue-engineered collagen gels containing human aortic smooth muscle cells and human aortic valvular interstitial cells, both isolated from noncalcific heart transplant tissue. The compacted collagen gels were cultured in osteogenic media for 3 weeks in a custom-designed bioreactor and all assessments were performed at the end of the culture period. The major finding of this study is that bone morphogenic protein (BMP)-2 and BMP-4 and transforming growth factor-ß1 mRNA expression significantly changed in response to the magnitude of applied strain in valvular cells, while the lowest expression was observed for the representative physiological strain. On the other hand, mRNA expression in vascular cells did not vary in response to the magnitude of strain. Regarding BMP-2 and BMP-4 protein expression determined by immunostaining, trends were similar to mRNA expression in vascular and valvular cells, where only valvular cells showed a varied protein expression depending on the magnitude of the strain applied. Our results suggest that cellular differences exist between vascular and valvular cells in their response to altered levels of cyclic strain during calcification.

Dynamic shear stress regulation of inflammatory and thrombotic pathways in baboon endothelial outgrowth cells.

Endothelial outgrowth cells (EOCs) have garnered much attention as a potential autologous endothelial source for vascular implants or in tissue engineering applications due to their ease of isolation and proliferative ability; however, how these cells respond to different hemodynamic cues is ill-defined. This study investigates the inflammatory and thrombotic response of baboon EOCs (BaEOCs) to four hemodynamic conditions using the cone and plate shear apparatus: steady, laminar shear stress (SS); pulsatile, nonreversing laminar shear stress (PS); oscillatory, laminar shear stress (OS); and net positive, pulsatile, reversing laminar shear stress (RS). In summary, endothelial nitric oxide synthase (eNOS) mRNA was significantly upregulated by SS compared to OS. No differences were found in the mRNA levels of the inflammatory markers intercellular adhesion molecule-1 (ICAM-1), E-selectin, and vascular cell adhesion molecule-1 (VCAM-1) between the shear conditions; however, OS significantly increased the number of monocytes bound when compared to SS. Next, SS increased the anti-thrombogenic mRNA levels of CD39, thrombomodulin, and endothelial protein-C receptor (EPCR) compared to OS. SS also significantly increased CD39 and EPCR mRNA levels compared to RS. Finally, no significant differences were detected when comparing pro-thrombotic tissue factor mRNA or its activity levels. These results indicate that shear stress can have beneficial (SS) or adverse (OS, RS) effects on the inflammatory or thrombotic potential of EOCs. Further, these results suggest SS hemodynamic preconditioning may be optimal in increasing the efficacy of a vascular implant or in tissue-engineered applications that have incorporated EOCs.