Synchronous Monitoring of Cement Hydration and Polymer Film Formation Using 1H-Time-Domain-NMR with T 2 Time-Weighted T 1 Time Evaluation: A Nondestructive Practicable Benchtop Method.

The interactions between latex and cement are still not completely understood. In this work, we would like to address the temporal changes in cement hardening and latex film formation. For this reason, the hydration process and the film formation were simultaneously monitored. This scientific issue is even more challenging as a nondestructive quantitative analysis of the film formation process is not available yet. Here, we report on simultaneous monitoring of the latex film formation and the phase development in cementitious systems via 1H-time-domain-NMR for the first time. The obtained results were validated using classical analytical methods, such as in situ X-ray diffraction, X-ray fluorescence (Rietveld analysis), and confocal laser scanning microscopy.

Reactivity of Metakaolin in Alkaline Environment: Correlation of Results from Dissolution Experiments with XRD Quantifications.

Systematic investigation of filtrates and filter residues resulting from a 24 h treatment of metakaolin in different alkaline solutions were performed. On filtered metakaolin particles, inductively coupled plasma-optical emission spectrometry (ICP-OES) measurements reveal an enrichment of iron and titanium, which suggests an inhomogeneous distribution of these cations. Since the SiO2/Al2O3 ratio remains constant in all filter residues examined, the dissolution of the Si and Al monomers is congruent. Structural differences, identified by attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) as a consequence of alkali uptake, influence the X-ray scattering contribution of metakaolin, and thus quantifications with the partial or no known crystal structure (PONKCS) method. This leads to deviations between the degree of reaction calculated from Si and Al solubility from filtrate and that quantified by quantitative powder X-ray diffraction (QPXRD) using the filter residue. Nevertheless, the described changes do not cause a shift in the X-ray amorphous hump in case of congruent dissolution, and thus allow the quantification of the metakaolin before and after dissolution with the same hkl-phase model.

C-S-H Pore Size Characterization Via a Combined Nuclear Magnetic Resonance (NMR)-Scanning Electron Microscopy (SEM) Surface Relaxivity Calibration.

A new method for the nuclear magnetic resonance (NMR) surface relaxivity calibration in hydrated cement samples is proposed. This method relies on a combined analysis of 28-d hydrated tricalcium silicate samples by scanning electron microscopy (SEM) image analysis and 1H-time-domain (TD)-NMR relaxometry. Pore surface and volume data for interhydrate pores are obtained from high resolution SEM images on surfaces obtained by argon broad ion beam sectioning. These data are combined with T2 relaxation times from 1H-TD-NMR to calculate the systems surface relaxivity according to the fast exchange model of relaxation. This new method is compared to an alternative method that employs sequential drying to calibrate the systems surface relaxivity.

Phase Solubility Changes during Hydration of Monocalciumaluminate and Calcite-The Influence of Alkali Accumulation.

The reaction of CA (monocalcium aluminate) with calcite was closely monitored with regard to phase development, pore water ion content and heat flow. Calcite acts as filler and reactant, finally leading to thermodynamically stable products after hydration at ambient conditions. For better understanding the mechanism taking place, a CA-cement and a commercial calcite mix were compared to a pure CA and pure calcite mix. Both reaction paths were compared. Thermodynamic modeling with PhreeqC gave insight about factors that can influence the course of the hydration reaction. Alkali ions in pore solution of the CA-cement relocate solubility curves of hydration products. Taking into account as many of the alkaline ions as possible, resulted in the closest representation of the measured phase content, confirming thermodynamic modeling. The high dynamics that develop during reaction could only be addressed if a concentration of alkalis in the pore solution at later points in time was respected, thus leading to a shift of solubility curves over time. This was not observed with the pure CA in absence of alkalis.

Investigation of the Incompatibilities of Cement and Superplasticizers and Their Influence on the Rheological Behavior.

The rheological behavior of cement paste and the improvement of its flowability takes center stage in many research projects. An improved flowability can be achieved by the addition of superplasticizers (SP), such as polycarboxylate ethers (PCE). In order to be able to use these PCEs effectively and in a variety of ways and to make them resistant to changes in the environment, it is crucial to understand the influence of SPs on cement hydration. For that reason, the topic of this paper was the incompatibility of a specific SP and an ordinary Portland cement (OPC). The incompatible behavior was analyzed using rheological tests, such as the spread flow test and penetration test, and the behavior was compared by means of an ultrasound technique and explained by the phase content measured by in-situ X-ray diffraction (XRD) the heat evolution measured by calorimetry, and scanning electron microscope (SEM) images. We showed that the addition of the SP in a high dosage led to a prevention of the passivation of the most reactive and aluminum-containing clinker phases, aluminate and brownmillerite. This induced the aluminate reaction to take place in the initial period and led to an immediate stiffening of the cement paste and, therefore, to the complete loss of workability. The results showed that in addition to the ettringite, which began to form directly after water addition, hemicarbonate precipitated. The fast stiffening of the paste could be prevented by delayed addition of the SP or by additional gypsum. This fast stiffening was not desirable for SPs, but in other fields, for example, 3D printing, this undesirable interaction could be used to improve the properties of printable mortar.

Relating Ettringite Formation and Rheological Changes during the Initial Cement Hydration: A Comparative Study Applying XRD Analysis, Rheological Measurements and Modeling.

In order to gain a deeper understanding of the rheological development of hydrating ordinary Portland cement (OPC) pastes at initial state, and to better understand their underlying processes, quantitative X-ray diffraction (XRD) analysis and rheological measurements were conducted and their results combined. The time-dependent relation between phase development and flow behavior of cement paste was investigated at two different temperatures (20 and 30 °C), over a period of two hours. Regarding the phase development during hydration, ettringite precipitation was identified as the dominant reaction in the first two hours. For both temperatures, the increasing ettringite content turned out to correlate very well with the loss of workability of the reacting cement paste. An exponential relationship between ettringite growth and flow behavior was observed that could be explained by applying the Krieger-Dougherty equation, which describes the influence of solid fraction on the viscosity of a suspension.

Coherent structures of the near field flow in a self-oscillating physical model of the vocal folds.

Current theories of voice production depend critically upon knowledge of the near field flow which emanates from the glottis. While most modern theories predict complex, three-dimensional structures in the near field flow, few investigations have attempted to quantify such structures. Using methods of flow visualization and digital particle image velocimetry, this study measured the near field flow structures immediately downstream of a self-oscillating, physical model of the vocal folds, with a vocal tract attached. A spatio-temporal analysis of the structures was performed using the method of empirical orthogonal eigenfunctions. Some of the observed flow structures included vortex generation, vortex convection, and jet flapping. The utility of such data in the future development of more accurate, low-dimensional models of voice production is discussed.

Nonlinear phenomena in contemporary vocal music.

Complex and multiphonic voice signals of vocal improvisors are analyzed within the framework of nonlinear dynamics. Evidence is given that nonlinear phenomena are extensively used by performers associated with contemporary music. Narrow-band spectrograms of complex vocalizations are used to visualize the appearance of nonlinear phenomena (spectral bifurcation diagrams). Possible production mechanisms are discussed in connection with previous research, personal performance and pedagogical experience. Examples for period doubling, biphonation and irregular aperiodic phonation in vocal sonorities of contemporary vocal improvisors are given, and glottal whistle production encompassed with biphonation and triphonation is shown. Furthermore, coincidences of harmonics-formant matching associated with abrupt transitions to subharmonics and biphonation in the vocal output are provided. This also shows the recurrent use of nonlinear phenomena by performers. It is argued that mechanisms such as source-tract coupling or vocal fold desynchronization due to asymmetry are used in a reproducible way for musical tasks.

Nonlinear analysis of irregular animal vocalizations.

Animal vocalizations range from almost periodic vocal-fold vibration to completely atonal turbulent noise. Between these two extremes, a variety of nonlinear dynamics such as limit cycles, subharmonics, biphonation, and chaotic episodes have been recently observed. These observations imply possible functional roles of nonlinear dynamics in animal acoustic communication. Nonlinear dynamics may also provide insight into the degree to which detailed features of vocalizations are under close neural control, as opposed to more directly reflecting biomechanical properties of the vibrating vocal folds themselves. So far, nonlinear dynamical structures of animal voices have been mainly studied with spectrograms. In this study, the deterministic versus stochastic (DVS) prediction technique was used to quantify the amount of nonlinearity in three animal vocalizations: macaque screams, piglet screams, and dog barks. Results showed that in vocalizations with pronounced harmonic components (adult macaque screams, certain piglet screams, and dog barks), deterministic nonlinear prediction was clearly more powerful than stochastic linear prediction. The difference, termed low-dimensional nonlinearity measure (LNM), indicates the presence of a low-dimensional attractor. In highly irregular signals such as juvenile macaque screams, piglet screams, and some dog barks, the detectable amount of nonlinearity was comparatively small. Analyzing 120 samples of dog barks, it was further shown that the harmonic-to-noise ratio (HNR) was positively correlated with LNM. It is concluded that nonlinear analysis is primarily useful in animal vocalizations with strong harmonic components (including subharmonics and biphonation) or low-dimensional chaos.