Ionic liquid supported hydrogel-lipase biocatalytic systems in asymmetric synthesis of enantiomerically pure S-ibuprofen.

Novel hydrogel biocatalysts with immobilized lipase, stabilized by ionic liquids (ILs) of different hydrophobicity, were synthesized and evaluated. Variations of the time of immobilization and ratio of substrates during hydrogel synthesis were considered to obtain the most stable biocatalyst with the highest activity. Physicochemical characterization proved the success of the hydrogel synthesis and enzyme deposition on the surface of the support. Nevertheless, the key objective was to produce a biocatalyst for further application in ibuprofen methyl ester resolution, with the aim of obtaining an enantiomerically pure product. The hydrogel biocatalysts obtained in the presence of 5 wt% ILs after 8 h of immobilization achieved the highest activity recovery of 62 %. After 10 reaction cycles, enzymatic activity was still above 60 %, and the negative effect of pH and temperature on the activity of immobilized lipase was much lower than in the case of the free enzyme. After application of the catalyst in the resolution of ibuprofen methyl ester, the enantiomeric excess and conversion rate of the process were obtained for the dynamic kinetic resolution in isooctane. A conversion rate of 95 % was achieved due to the stabilization of the biocatalyst with IL and its resulting high catalytic activity. The study thus provides the pharmaceutical industry with a new potential approach with a strong scientific foundation.

Metals extraction processes from electronic waste: constraints and opportunities.

The skyrocketing demand and progressive technology have increased our dependency on electrical and electronic devices. However, the life span of these devices has been shortened because of rapid scientific expansions. Hence, massive volumes of electronic waste (e-waste) is generating day by day. Nevertheless, the ongoing management of e-waste has emerged as a major threat to sustainable economic development worldwide. In general, e-waste contains several toxic substances such as metals, plastics, and refractory oxides. Metals, particularly lead, mercury, nickel, cadmium, and copper along with some valuable metals such as rare earth metals, platinum group elements, alkaline and radioactive metal are very common; which can be extracted before disposing of the e-waste for reuse. In addition, many of these metals are hazardous. Therefore, e-waste management is an essential issue. In this study, we critically have reviewed the existing extraction processes and compared among different processes such as physical, biological, supercritical fluid technologies, pyro and hydrometallurgical, and hybrid methods used for metals extraction from e-waste. The review indicates that although each method has particular merits but hybrid methods are eco-friendlier with extraction efficiency > 90%. This study also provides insight into the technical challenges to the practical realization of metals extraction from e-waste sources.

Assessment of pilot direct contact membrane distillation regeneration of lithium chloride solution in liquid desiccant air-conditioning systems using computer simulation.

Membrane distillation (MD) has been increasingly explored for treatment of various hyper saline waters, including lithium chloride (LiCl) solutions used in liquid desiccant air-conditioning (LDAC) systems. In this study, the regeneration of liquid desiccant LiCl solution by a pilot direct contact membrane distillation (DCMD) process is assessed using computer simulation. Unlike previous experimental investigations, the simulation allows to incorporate both temperature and concentration polarisation effects in the analysis of heat and mass transfer through the membrane, thus enabling the systematic assessment of the pilot DCMD regeneration of the LiCl solution. The simulation results demonstrate distinctive profiles of water flux, thermal efficiency, and LiCl concentration along the membrane under cocurrent and counter-current flow modes, and the pilot DCMD process under counter-current flow is superior to that under cocurrent flow regarding the process thermal efficiency and LiCl concentration enrichment. Moreover, for the pilot DCMD regeneration of LiCl solution under the counter-current flow, the feed inlet temperature, LiCl concentration, and especially the membrane leaf length exert profound impacts on the process performance: the process water flux halves from 12 to 6 L/(m2·h) whilst thermal efficiency decreases by 20% from 0.46 to 0.37 when the membrane leaf length increases from 0.5 to 1.5 m.

Assessing the environmental impacts and greenhouse gas emissions from the common municipal wastewater treatment systems.

This study measured the environmental impacts from three same-size wastewater treatment systems, specifically activated sludge, a constructed wetland, and a high rate algal pond. Detailed data inventories were employed using SimaPro 9 software to calculate the entire consequences by ReCiPe 2016 and Greenhouse Gas Protocol method. The environmental outcomes caused by substance emissions and resource extraction are presented in several impact categories at the endpoint level. For a better comparison, the single score tool was applied to aggregate all factors into three areas of protection: human health, ecosystem, and resource shortage. Results showed that concrete and steel are the main contributors to the construction phase, while electricity is responsible for the operation stage. The single score calculation indicates that the proportion of construction activities could be equal to or even higher than the operation stage for a small capacity plant. The total environmental impact of the conventional system was 2.3-fold and 3-fold higher than that of constructed wetland and high rate algal pond, respectively. High rate algal pond has the best environmental performance when generating the least burdens and greenhouse gas emissions of 0.72 kg CO2 equivalent per m3. Constructed wetland produces 5.69 kg CO2, higher than an algal pond but much lower than activated sludge plant, emitting 11.42 kg CO2 per m3.

Removal process of antibiotics during anaerobic treatment of swine wastewater.

High concentrations of antibiotics in swine wastewater pose potentially serious risks to the environment, human and animal health. Identifying the mechanism for removing antibiotics during the anaerobic treatment of swine wastewater is essential for reducing the serious damage they do to the environment. In this study, batch experiments were conducted to investigate the biosorption and biodegradation of tetracycline and sulfonamide antibiotics (TCs and SMs) in anaerobic processes. Results indicated that the removal of TCs in the anaerobic reactor contributed to biosorption, while biodegradation was responsible for the SMs' removal. The adsorption of TCs fitted well with the pseudo-second kinetic mode and the Freundlich isotherm, which suggested a heterogeneous chemisorption process. Cometabolism was the main mechanism for the biodegradation of SMs and the process fitted well with the first-order kinetic model. Microbial activity in the anaerobic sludge might be curtailed due to the presence of high concentrations of SMs.

Extraction of strategically important elements from brines: Constraints and opportunities.

Strategically important elements are those that are vital to advanced manufacturing, low carbon technologies and other growing industries. Ongoing depletion and supply risks to these elements are a critical concern, and thus, recovery of these elements from low-grade ores and brines has generated significant interest worldwide. Among the strategically important elements, this paper focuses on rare earth elements (REEs), the platinum-group metals and lithium due to their wide application in the advanced industrial economics. We critically review the current methods such as precipitation, ion exchange and solvent extraction for extracting these elements from low-grade ores and brines and provide insight into the technical challenges to the practical realisation of metal extraction from these low-grade sources. The challenges include the low concentration of the target elements in brines and inadequate selectivity of the existing methods. This review also critically analyzes the potential applicability of an integrated clean water production and metal extraction process based on conventional pressure-driven membrane and emerging membrane technologies (e.g., membrane distillation). Such a process can first enrich the strategically important elements in solution for their subsequent recovery along with clean water production.

Occurrence and risk assessment of multiple classes of antibiotics in urban canals and lakes in Hanoi, Vietnam.

Very little information on the occurrence and risk assessment of antibiotics in the aquatic environment is reported for Vietnam, where antibiotics are assumed to be omnipresent in urban canals and lakes at high concentrations due to the easy accessibility of antibiotics without doctor prescription. This study provides comprehensive analysis of the occurrence of 23 antibiotics in urban canals (To Lich and Kim Nguu) and lakes (West Lake, Hoan Kiem, and Yen So) in Hanoi, Vietnam. Of these 23 antibiotics, 18 were detected in urban canals at above 67.9% detection frequency (DF). The concentrations of detected antibiotics were in the range from below quantification limit (MQL) to almost 50,000 ng/L, depending on the compound and sampling site. In urban canals, median concentration of amoxicillin, erythromycin, and sulfamethoxazole was >1000 ng/L while other antibiotics such as ampicillin, chloramphenicol, clindamycin, sulfamethazine, tetracycline, tylosin and vancomycin were detected at median concentrations of <100 ng/L. Similarly, 16 target antibiotics were also detected in urban lakes. Macrolides (azithromycin, clarithromycin, and erythromycin-H2O), fluoroquinolones (enrofloxacin and ofloxacin), lincosamides (clindamycin and lincomycin), and trimethoprim were ubiquitously detected in urban lakes (DF = 100%). In this study, potential risks of antibiotics in the investigated urban canals and lakes were assessed based on the predicted no-effect concentration (PNEC) from the existing literature for antibiotic resistance selection (PNECARM) and ecological toxicity to aquatic organisms (PNECEcotox). Ampicillin, amoxicillin, azithromycin, ciprofloxacin, clarithromycin, enrofloxacin, erythromycin, ofloxacin, tetracycline, and trimethoprim were found in the investigated urban canals at concentrations exceeding their PNECARM and PNECEcotox. Similarly, most of the target antibiotics (i.e. amoxicillin, ciprofloxacin, clarithromycin, clindamycin, enrofloxacin, erythromycin, lincomycin, ofloxacin, sulfamethoxazole, tetracycline, trimethoprim and tylosin) were detected in the investigated urban lakes at concentrations close to or exceeding PNECEcotox for aquatic organisms. Further investigations on the occurrence and fate of antibiotic residues and antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in surface waters are recommended.

Insights into biofilm carriers for biological wastewater treatment processes: Current state-of-the-art, challenges, and opportunities.

Biofilm carriers play an important role in attached growth systems for wastewater treatment processes. This study systematically summarizes the traditional and novel biofilm carriers utilized in biofilm-based wastewater treatment technology. The advantages and disadvantages of traditional biofilm carriers are evaluated and discussed in light of basic property, biocompatibility and applicability. The characteristics, applications performance, and mechanism of novel carriers (including slow-release carriers, hydrophilic/electrophilic modified carriers, magnetic carriers and redox mediator carriers) in wastewater biological treatment were deeply analyzed. Slow release biofilm carriers are used to provide a solid substrate and electron donor for the growth of microorganisms and denitrification for anoxic and/or anaerobic bioreactors. Carriers with hydrophilic/electrophilic modified surface are applied for promoting biofilm formation. Magnetic materials-based carriers are employed to shorten the start-up time of bioreactor. Biofilm carriers acting as redox mediators are used to accelerate biotransformation of recalcitrant pollutants in industrial wastewater.

Effect of organic loading rate on the recovery of nutrients and energy in a dual-chamber microbial fuel cell.

This study aimed to assess the impacts of organic loading rate (OLR) (435-870 mgCOD/L·d) on nutrients recovery via a double-chamber microbial fuel cell (MFC) for treating domestic wastewater. Electricity generation was also explored at different OLRs, including power density and coulombic efficiency. Experimental results suggested the MFC could successfully treat municipal wastewater with over 90% of organics being removed at a wider range of OLR from 435 to 725 mgCOD/L·d. Besides, the maximum power density achieved in the MFC was 253.84 mW/m2 at the OLR of 435 mgCOD/L·d. Higher OLR may disrupt the recovery of PO43--P and NH4+-N via the MFC. The same pattern was observed for the coulombic efficiency of the MFC and its highest value was 25.01% at the OLR of 435 mgCOD/L·d. It can be concluded that nutrients and electrical power can be simultaneously recovered from municipal wastewater via the dual-chamber MFC.

Optimization of hydraulic retention time and organic loading rate for volatile fatty acid production from low strength wastewater in an anaerobic membrane bioreactor.

This study aims to investigate the production of volatile fatty acids (VFAs) from low strength wastewater at various hydraulic retention time (HRT) and organic loading rate (OLR) in a continuous anaerobic membrane bioreactor (AnMBR) using glucose as carbon source. This experiment was performed without any selective inhibition of methanogens and the reactor pH was maintained at 7.0 ±â€¯0.1. 48, 24, 18, 12, 8 and 6 h-HRTs were applied and the highest VFA concentration was recorded at 8 h with an overall VFA yield of 48.20 ±â€¯1.21 mg VFA/100 mg CODfeed. Three different ORLs were applied (350, 550 and 715 mg CODfeed) at the optimum 8 h-HRT. The acetic and propanoic acid concentration maximums were (1.1845 ±â€¯0.0165 and 0.5160 ±â€¯0.0141 mili-mole/l respectively) at 550 mg CODfeed. The isobutyric acid concentration was highest (0.3580 ±â€¯0.0407 mili-mole/l) at 715 mg CODfeed indicating butyric-type fermentation at higher organic loading rate.

Anaerobic membrane bioreactors for antibiotic wastewater treatment: Performance and membrane fouling issues.

Antibiotic wastewater has become a major concern due to the toxicity and recalcitrance of antibiotics. Anaerobic membrane bioreactors (AnMBRs) are considered alternative technology for treating antibiotic wastewater because of their advantages over the conventional anaerobic processes and aerobic MBRs. However, membrane fouling remains the most challenging issue in the AnMBRs' operation and this limits their application. This review critically discusses: (i) antibiotics removal and antibiotic resistance genes (ARGs) in different types of AnMBRs and the impact of antibiotics on membrane fouling and (ii) the integrated AnMBRs systems for fouling control and removal of antibiotics. The presence of antibiotics in AnMBRs could aggravate membrane fouling by influencing fouling-related factors (i.e., sludge particle size, extracellular polymeric substances (EPS), soluble microbial products (SMP), and fouling-related microbial communities). Conclusively, integrated AnMBR systems can be a practical technology for antibiotic wastewater treatment.

Removal and fate of micropollutants in a sponge-based moving bed bioreactor.

This study investigated the removal of micropollutants using polyurethane sponge as attached-growth carrier. Batch experiments demonstrated that micropollutants could adsorb to non-acclimatized sponge cubes to varying extents. Acclimatized sponge showed significantly enhanced removal of some less hydrophobic compounds (log D<2.5), such as ibuprofen, acetaminophen, naproxen, and estriol, as compared with non-acclimatized sponge. The results for bench-scale sponge-based moving bed bioreactor (MBBR) system elucidated compound-specific variation in removal, ranging from 25.9% (carbamazepine) to 96.8% (ß-Estradiol 17-acetate) on average. In the MBBR system, biodegradation served as a major removal pathway for most compounds. However, sorption to sludge phase was also a notable removal mechanism of some persistent micropollutants. Particularly, carbamazepine, ketoprofen and pentachlorophenol were found at high concentrations (7.87, 6.05 and 5.55 µg/g, respectively) on suspended biosolids. As a whole, the effectiveness of MBBR for micropollutant removal was comparable with those of activated sludge processes and MBRs.

A review on the occurrence of micropollutants in the aquatic environment and their fate and removal during wastewater treatment.

Micropollutants are emerging as a new challenge to the scientific community. This review provides a summary of the recent occurrence of micropollutants in the aquatic environment including sewage, surface water, groundwater and drinking water. The discharge of treated effluent from WWTPs is a major pathway for the introduction of micropollutants to surface water. WWTPs act as primary barriers against the spread of micropollutants. WWTP removal efficiency of the selected micropollutants in 14 countries/regions depicts compound-specific variation in removal, ranging from 12.5 to 100%. Advanced treatment processes, such as activated carbon adsorption, advanced oxidation processes, nanofiltration, reverse osmosis, and membrane bioreactors can achieve higher and more consistent micropollutant removal. However, regardless of what technology is employed, the removal of micropollutants depends on physico-chemical properties of micropollutants and treatment conditions. The evaluation of micropollutant removal from municipal wastewater should cover a series of aspects from sources to end uses. After the release of micropollutants, a better understanding and modeling of their fate in surface water is essential for effectively predicting their impacts on the receiving environment.

Oxidation of triclosan by ferrate: reaction kinetics, products identification and toxicity evaluation.

The oxidation of triclosan by commercial grade aqueous ferrate (Fe(VI)) was investigated and the reaction kinetics as a function of pH (7.0-10.0) were experimentally determined. Intermediate products of the oxidation process were characterized using both GC-MS and RRLC-MS/MS techniques. Changes in toxicity during the oxidation process of triclosan using Fe(VI) were investigated using Pseudokirchneriella subcapitata growth inhibition tests. The results show that triclosan reacted rapidly with Fe(VI), with the apparent second-order rate constant, k(app), being 754.7 M(-1) s(-1) at pH 7. At a stoichiometric ratio of 10:1 (Fe(VI):triclosan), complete removal of triclosan was achieved. Species-specific rate constants, k, were determined for reaction of Fe(VI) with both the protonated and deprotonated triclosan species. The value of k determined for neutral triclosan was 6.7(±1.9)×10(2) M(-1) s(-1), while that measured for anionic triclosan was 7.6(±0.6)×10(3) M(-1) s(-1). The proposed mechanism for the oxidation of triclosan by the Fe(VI) involves the scission of ether bond and phenoxy radical addition reaction. Coupling reaction may also occur during Fe(VI) degradation of triclosan. Overall, the degradation processes of triclosan resulted in a significant decrease in algal toxicity. The toxicity tests showed that Fe(VI) itself dosed in the reaction did not inhibit green algae growth.

The effect of information on public acceptance--the case of water from alternative sources.

This study aims to provide conclusive evidence that information about water from alternative sources increases public acceptance. We conducted an experiment with 1000 Australian respondents asking them about their acceptance of recycled and desalinated water for a range of purposes under two conditions: 1) no information provided and 2) information about the production process provided. Results indicate that - both for desalinated and recycled water - the stated likelihood of use increases significantly if people are provided with information about the production process. This has major implications for public policy makers indicating that providing factual information (as opposed to persuasive campaigns) will increase public support of water augmentation projects.

Effect of mixed liquor pH on the removal of trace organic contaminants in a membrane bioreactor.

Experiments were conducted over approximately 7 months to investigate the effects of mixed liquor pH (between pH 5 and 9) on the removal of trace organics by a submerged MBR system. Removal efficiencies of ionisable trace organics (sulfamethoxazole, ibuprofen, ketoprofen, and diclofenac) were strongly pH dependent. However, the underlying removal mechanisms are different for ionisable and non-ionisable compounds. High removal efficiencies of these ionisable trace organics at pH 5 could possibly be attributed to their speciation behaviour. At this pH, these compounds exist predominantly in their hydrophobic form. Consequently, they could readily adsorb to the activated sludge, resulting in higher removal efficiency in comparison to under less acidic conditions in the reactor. Removal efficiencies of the two non-ionisable compounds bisphenol A and carbamazepine were relatively independent of the mixed liquor pH. Results reported here suggest an apparent connection between physicochemical properties of the compounds and their removal efficiencies by MBRs.

Influence of organic and colloidal fouling on the removal of sulphamethoxazole by nanofiltration membranes.

This study investigated the effects of organic and colloidal fouling on the removal of a representative micropollutant sulphamethoxazole by two commercially available NF membranes. Alginate, bovine serum albumin and colloidal silica were selected as model foulants to simulate hydrophilic and hydrophobic organic fractions, and colloidal matter that are often found in treated effluent and surface water. Membrane fouling was related to the membrane and foulant characteristics and subsequently the separation behaviour of the micropollutant sulphamethoxazole under different solution pH. On the basis of these results, it was confirmed that membrane fouling is strongly dependent on both the foulant and membrane characteristics. The complex relationship among retention mechanisms, fouling mechanisms and the effects of fouling on retention was systematically delineated. Of the three model foulants selected for this study, colloidal fouling resulted in the most significant reduction in retention of sulphamethoxazole as well as inorganic salts, while flux decline as a result of colloidal fouling was quite moderate. Reduction in retention caused by fouling was attributed to a phenomenon known as cake-enhance concentration polarisation, which was a predominant mechanism of colloidal fouling. In addition, the reported results suggested that the effect of fouling on retention is also membrane pore size dependent.