Rational Design of Triboelectric Materials and Devices for Self-Powered Food Sensing.

Against the backdrop of rapid advancements in 5G and Internet of Things (IoT) technologies, there is an urgent need to upgrade food sensing systems to achieve automation, digitalization, and intelligence. However, this transformation process faces numerous challenges. Triboelectric nanogenerators (TENGs), as an emerging energy conversion and sensing technology, play a crucial role in this context. They not only provide power to functional devices but also serve as sensors in multifunctional self-powered food sensing systems, capable of detecting various physical and chemical information. This review explores the development of TENGs in the field of food sensing, focusing on the working principles of their self-powered sensing. The review also systematically organizes and classifies the material and device designs used for TENGs in various food applications. Based on the performance of TENGs, a detailed introduction is provided on the specific applications of self-powered food sterilization, self-powered food quality monitoring, and self-powered taste sensing in the field of food safety. Finally, this paper discusses the challenges and corresponding strategies of TENGs in the food sensing field. The aim is to further promote unmanned and smart services and management in the food sector and to provide new research perspectives.

Smart Lanceolate Surface with Fast Fog-Digesting Performance for Triboelectric Energy Harvesting.

Utilizing the ubiquitous fog in nature to create decentralized energy-harvesting devices, free from geographical and hydrological constraints, presents an opportunity to foster sustainable power generation. Extracting electrical energy from fog relies heavily on fog-digesting performance. Improving the efficiency of fogwater utilization remains a formidable challenge for existing fogwater energy-harvesting technologies. Inspired by the water-harvesting behavior of Tillandsia leaves, a smart lanceolate surface is developed to harvest triboelectric energy by rapidly digesting fog. Such a surface exhibits capabilities in fog management, encompassing precise fog capture, transportation, and critical droplet separation. Specifically, fog droplets condense at hydrophilic sites of acylated cellulose ester, subsequently migrating toward the rear under Laplace pressure, thereby producing energy as they traverse through the tail end. Such architecture yields a brief voltage restoration period (with an average of 9.36 s), can rush the capacitor to 11.59 V within 20 s, and achieves a water-digestion rate of up to 71.05 kg/m2 h. This biomimetic approach enhances the water-digestion efficacy of the atmospheric water energy apparatus and offers perspectives on mitigating deficiencies in power resources.

Triboelectrically Empowered Biomimetic Heterogeneous Wettability Surface for Efficient Fog Collection.

Biomimetic engineering surfaces featuring heterogeneous wettability are vital for atmospheric water harvesting applications. Existing research predominantly focuses on the coordinated regulation of surface wettability through structural and chemical modifications, often overlooking the prevalent triboelectric charge effect at the liquid-solid interface. In this work, we designed a heterogeneous wettability surface by strategic masking and activated its latent triboelectric charge using triboelectric brushes, thereby enhancing the removal and renewal of surface droplets. By examining the dynamic evolution of droplets, the mechanism of triboelectric enhancement in the water collection efficiency is elucidated. Leveraging this inherent triboelectric charge interaction, fog collection capacity can be augmented by 29% by activating the system for 5 s every 60 s. Consequently, the advancement of triboelectric charge-enhanced fog collection technology holds both theoretical and practical significance for overcoming the limitations of traditional surface wettability regulation.

Phase-Directed Assembly of Triboelectric Nanopaper for Self-Powered Noncontact Sensing.

Noncontact sensing technology serves as a pivotal medium for seamless data acquisition and intelligent perception in the era of the Internet of Things (IoT), bringing innovative interactive experiences to wearable human-machine interaction perception networks. However, the pervasive limitations of current noncontact sensing devices posed by harsh environmental conditions hinder the precision and stability of signals. In this study, the triboelectric nanopaper prepared by a phase-directed assembly strategy is presented, which possesses low charge transfer mobility (1618 cm2 V-1 s-1) and exceptional high-temperature stability. Wearable self-powered noncontact sensors constructed from triboelectric nanopaper operate stably under high temperatures (200 °C). Furthermore, a temperature warning system for workers in hazardous environments is demonstrated, capable of nonintrusively identifying harmful thermal stimuli and detecting motion status. This research not only establishes a technological foundation for accurate and stable noncontact sensing under high temperatures but also promotes the sustainable intelligent development of wearable IoT devices under extreme environments.

Gel-Based Triboelectric Nanogenerators for Flexible Sensing: Principles, Properties, and Applications.

The rapid development of the Internet of Things and artificial intelligence technologies has increased the need for wearable, portable, and self-powered flexible sensing devices. Triboelectric nanogenerators (TENGs) based on gel materials (with excellent conductivity, mechanical tunability, environmental adaptability, and biocompatibility) are considered an advanced approach for developing a new generation of flexible sensors. This review comprehensively summarizes the recent advances in gel-based TENGs for flexible sensors, covering their principles, properties, and applications. Based on the development requirements for flexible sensors, the working mechanism of gel-based TENGs and the characteristic advantages of gels are introduced. Design strategies for the performance optimization of hydrogel-, organogel-, and aerogel-based TENGs are systematically summarized. In addition, the applications of gel-based TENGs in human motion sensing, tactile sensing, health monitoring, environmental monitoring, human-machine interaction, and other related fields are summarized. Finally, the challenges of gel-based TENGs for flexible sensing are discussed, and feasible strategies are proposed to guide future research.

Directional Moisture-Wicking Triboelectric Materials Enabled by Laplace Pressure Differences.

Wearable sensors are experiencing vibrant growth in the fields of health monitoring systems and human motion detection, with comfort becoming a significant research direction for wearable sensing devices. However, the weak moisture-wicking capability of sensor materials leads to liquid retention, severely restricting the comfort of the wearable sensors. This study employs a pattern-guided alignment strategy to construct microhill arrays, endowing triboelectric materials with directional moisture-wicking capability. Within 2.25 s, triboelectric materials can quickly and directionally remove the droplets, driven by the Laplace pressure differences and the wettability gradient. The directional moisture-wicking triboelectric materials exhibit excellent pressure sensing performance, enabling rapid response/recovery (29.1/37.0 ms), thereby achieving real-time online monitoring of human respiration and movement states. This work addresses the long-standing challenge of insufficient moisture-wicking driving force in flexible electronic sensing materials, holding significant implications for enhancing the comfort and application potential of electronic skin and wearable electronic devices.

A super-hydrophilic graphite directly from lignin enabled by a room-temperature cascade catalytic carbonization.

A cost-effective, and low-energy room-temperature cascade catalytic carbonization strategy is demonstrated for converting lignin into graphite with a high yield of 87 %, a high surface potential of -37 eV and super-hydrophilicity. This super-hydrophilic feature endows the lignin-derived graphite to be dispersed in a variety of polar solvents, which is important for its future applications. Encapsulating of liquid metals with the graphite for electrical circuit patterning on flexible substrates is also advocated. These written patterns show superb conductivity of 4.9 × 106 S/m, offering good performance stability and reliability while being repeatedly stretched, folded, twisted, and bent. This will offer new designs for flexible electronic devices, sensors, and biomedical devices.

Direct synthesis of a lithium carboxymethyl cellulose binder using wood dissolving pulp for high-performance LiFePO4 cathodes in lithium-ion batteries.

Lithium carboxymethyl cellulose (CMC-Li) is a promising novel water-based binder for lithium-ion batteries. The direct synthesis of CMC-Li was innovatively developed using abundant wood dissolving pulp materials from hardwood (HW) and softwood (SW). The resulting CMC-Li-HW and CMC-Li-SW binders possessed a suitable degree of substitutions and excellent molecular weight distributions with an appropriate quantity of long- and short-chain celluloses, which facilitated the construction of a reinforced concrete-like bonding system. When used as cathode binders in LiFePO4 batteries, they uniformly coated and dispersed the electrode materials, formed a compact and stable conductive network with high mechanical strength and showed sufficient lithium replenishment. The prepared LiFePO4 batteries exhibited good mechanical stability, low charge transfer impedance, high initial discharge capacity (∼180 mAh/g), high initial Coulombic efficiency (99 %), excellent cycling performance (<3% loss over 200 cycles) and good rate capability, thereby outperforming CMC-Na and the widely used cathode binder polyvinylidene fluoride.

Compliant Iontronic Triboelectric Gels with Phase-Locked Structure Enabled by Competitive Hydrogen Bonding.

Rapid advancements in flexible electronics technology propel soft tactile sensing devices toward high-level biointegration, even attaining tactile perception capabilities surpassing human skin. However, the inherent mechanical mismatch resulting from deficient biomimetic mechanical properties of sensing materials poses a challenge to the application of wearable tactile sensing devices in human-machine interaction. Inspired by the innate biphasic structure of human subcutaneous tissue, this study discloses a skin-compliant wearable iontronic triboelectric gel via phase separation induced by competitive hydrogen bonding. Solvent-nonsolvent interactions are used to construct competitive hydrogen bonding systems to trigger phase separation, and the resulting soft-hard alternating phase-locked structure confers the iontronic triboelectric gel with Young's modulus (6.8-281.9 kPa) and high tensile properties (880%) compatible with human skin. The abundance of reactive hydroxyl groups gives the gel excellent tribopositive and self-adhesive properties (peel strength > 70 N m-1). The self-powered tactile sensing skin based on this gel maintains favorable interface and mechanical stability with the working object, which greatly ensures the high fidelity and reliability of soft tactile sensing signals. This strategy, enabling skin-compliant design and broad dynamic tunability of the mechanical properties of sensing materials, presents a universal platform for broad applications from soft robots to wearable electronics.

Lightweight and Strong Cellulosic Triboelectric Materials Enabled by Cell Wall Nanoengineering.

As intelligent technology surges forward, wearable electronics have emerged as versatile tools for monitoring health and sensing our surroundings. Among these advancements, porous triboelectric materials have garnered significant attention for their lightness. However, these materials face the challenge of improving structural stability to further enhance the sensing accuracy of triboelectric sensors. In this study, a lightweight and strong porous cellulosic triboelectric material is designed by cell wall nanoengineering. By tailoring of the cell wall structure, the material shows a high mechanical strength of 51.8 MPa. The self-powered sensor constructed by this material has a high sensitivity of 33.61 kPa-1, a fast response time of 36 ms, and excellent pressure detection durability. Notably, the sensor still enables a high sensing performance after the porous cellulosic triboelectric material exposure to 200 °C and achieves real-time feedback of human motion, thereby demonstrating great potential in the field of wearable electronic devices.

High Strength and Toughness Polymeric Triboelectric Materials Enabled by Dense Crystal-Domain Cross-Linking.

Lightweight, easily processed, and durable polymeric materials play a crucial role in wearable sensor devices. However, achieving simultaneously high strength and toughness remains a challenge. This study addresses this by utilizing an ion-specific effect to control crystalline domains, enabling the fabrication of a polymeric triboelectric material with tunable mechanical properties. The dense crystal-domain cross-linking enhances energy dissipation, resulting in a material boasting both high tensile strength (58.0 MPa) and toughness (198.8 MJ m-3), alongside a remarkable 416.7% fracture elongation and 545.0 MPa modulus. Leveraging these properties, the material is successfully integrated into wearable self-powered devices, enabling real-time feedback on human joint movement. This work presents a valuable strategy for overcoming the strength-toughness trade-off in polymeric materials, paving the way for their enhanced applicability and broader use in diverse sensing applications.

Cellulose acetate-based electrospun nanofiber aerogel with excellent resilience and hydrophobicity for efficient removal of drug residues and oil contaminations from wastewater.

Cellulose acetate (CA)-based electrospun nanofiber aerogel (ENA) has drawn extensive attention for wastewater remediation due to its unique separation, inherent porosity and biodegradability. However, the low mechanical strength, poor durability, and limited adsorption ability hinder its further applications. We herein propose using silane-modified ENA, namely T-CA@Si@ZIF-67 (T-ENA), with enhanced resilience, hydrophobicity, durability and hetero-catalysis to remediate a complex wastewater containing oil and drug residues. The robust T-ENA was fabricated by pre-doping tetraethyl orthosilicate (TEOS) and ligand in its spinning precursors, followed by in-situ anchoring of porous ZIF-67 on the electrospun nanofibers (ENFs) via seeding method before freeze-drying and thermal curing (T). Results show that the T-ENA displays enhanced mechanical stability/resilience and hydrophobicity without compromise of its high porosity (>98 %) and low density (10 mg/cm3) due to the silane cross-linking. As a result, the hydrophobic T-ENA shows over 99 % separation efficiency towards different oil-water solutions. Meanwhile, thanks to the enhanced adsorption-catalytic ability and the activation of peroxymonosulfate (PMS) from the porous ZIF-67, fast degradation of carbamazepine (CBZ) residue in the wastewater can be achieved within 20 min. This work might provide a novel strategy for developing CA aerogels to remove organic pollutants.

A Tough Monolithic-Integrated Triboelectric Bioplastic Enabled by Dynamic Covalent Chemistry.

Electronic waste is a growing threat to the global environment and human health, raising particular concerns. Triboelectric devices synthesized from sustainable and degradable materials are a promising electronic alternative, but the mechanical mismatch at the interface between the polymer substrate and the electrodes remains unresolved in practical applications. This study uses the sulfhydryl silanization reaction and the chemical selectivity and site specificity of the thiol-disulfide exchange reaction in dynamic covalent chemistry to prepare a tough monolithic-integrated triboelectric bioplastic. The stress is dissipated by covalent bond adaptation to the interface interaction, which makes the polymer dielectric layer to the conductive layer have a good interface adhesion effect (220.55 kPa). The interfacial interlocking of the polymer substrate with the conductive layer gives the triboelectric bioplastic excellent tensile strength (87.4 MPa) and fracture toughness (33.3 MJ m-3). Even when subjected to a tension force of 10 000 times its weight, it still maintains a stable triboelectric output with no visible cracks. This study provides new insights into the design of reliable and environmentally friendly self-powered devices, which is significant for the development of flexible wearable electronics.

Dynamic Thermostable Cellulosic Triboelectric Materials from Multilevel-Non-Covalent Interactions.

Triboelectric materials present great potential for harvesting huge amounts of dispersed energy, and converting them directly into useful electricity, a process that generates power more sustainably. Triboelectric nanogenerators (TENGs) have emerged as a technology to power electronics and sensors, and it is expected to solve the problem of energy harvesting and self-powered sensing from extreme environments. In this paper, a high-temperature-resistant triboelectric material is designed based on multilevel non-covalent bonding interactions, which achieves an ultra-high surface charge density of 192 µC m-2 at high temperatures. TENGs based on the triboelectric material exhibit more than an order of magnitude higher power output (2750 mW m-2 at 200 °C) than the existing devices at high temperatures. These remarkable properties are achieved based on enthalpy-driven molecular assembly in highly unbonded states. Thus, the material maintains bond strength and ultra-high surface charge density in entropy-dominated high-temperature environments. This molecular design concept points out a promising direction for the preparation of polymers with excellent triboelectric properties.

Polydopamine modified cellulose nanocrystals (CNC) for efficient cellulase immobilization towards advanced bamboo fiber flexibility and tissue softness.

Herein, a green facile approach to improve the flexibility of unbleached bamboo kraft pulp (UBKP) via an immobilized enzyme technology is proposed. Polydopamine (PDA) acts as versatile modification and coating materials of cellulose nanocrystals (CNC) for assembling versatile bio-carriers (PDA@CNC). Cellulase biomacromolecules are efficiently immobilized on PDA@CNC to form cellulase@PDA@CNC nanocomposites. The relative enzyme activity, temperature/pH tolerance, and storage stability of cellulase were significantly improved after immobilization. The degree of polymerization treated UBKP decreased by 5.42 % (25 U/g pulp) compared to the control sample. The flexibility of treated fibers was 6.61 × 1014/(N·m2), which was 96.93 % higher (25 U/g) compared to the control and 3.88 times higher than that of the blank fibers. Cellulase@PDA@CNC performs excellent accessibility to fiber structure and induces high degree of fibrillation and hydrolysis of UBKP fibers, which contributes high softness of obtained tissue handsheets. The bio-carrier PDA@CNC within paper framework may further enhance tissue tensile strength. This study proposes a practical and environmentally friendly immobilization approach of cellulase@PDA@CNC for improving the hydrolysis efficiency and flexibility of UBKP fibers, which provides the possibility to maintain the strength of tissue paper while improving its softness, thus broadening the high-value application of immobilized enzyme technology in tissue production.

A feruloyl esterase/cellulase integrated biological system for high-efficiency and toxic-chemical free isolation of tobacco based cellulose nanofibers.

Tobacco based cellulose nanofiber (TCNF) is a novel nanocellulose that has recently been used to replace undesirable wood pulp fibers in the preparation of reconstructed tobacco sheets (RTS). However, given the strict requirements for controlling toxic chemical content in tobacco products, there is a global interest in developing a green, efficient, and toxic-chemical free approach to isolate TCNF from tobacco stem as a bioresource. In this study, we propose a creative and environmentally friendly method to efficiently and safely isolate TCNF from tobacco stem pulp, which involves integrated biological pretreatment followed by a facile mechanical defibrillation process. Feruloyl esterase is used to pretreat the stem pulp by disrupting the ether and ester bonds between lignin and polysaccharide carbohydrates within the fiber wall, which effectively facilitates cellulase hydrolysis and swelling of the stem pulp fiber, as well as the following mechanical shearing treatment for TCNF isolation. The results demonstrate that TCNF obtained by the comprehensive feruloyl esterase/cellulase/mechanical process exhibit uniform and well-dispersed nanofiber morphology, higher crystallinity, and stronger mechanical properties than those of the control. The addition of 0.5 % TCNF can replace wood pulp by 18 wt% ~ 25 wt% in the production of RTS samples while maintaining their reasonable strength properties.

Rational Design of Cellulosic Triboelectric Materials for Self-Powered Wearable Electronics.

With the rapid development of the Internet of Things and flexible electronic technologies, there is a growing demand for wireless, sustainable, multifunctional, and independently operating self-powered wearable devices. Nevertheless, structural flexibility, long operating time, and wearing comfort have become key requirements for the widespread adoption of wearable electronics. Triboelectric nanogenerators as a distributed energy harvesting technology have great potential for application development in wearable sensing. Compared with rigid electronics, cellulosic self-powered wearable electronics have significant advantages in terms of flexibility, breathability, and functionality. In this paper, the research progress of advanced cellulosic triboelectric materials for self-powered wearable electronics is reviewed. The interfacial characteristics of cellulose are introduced from the top-down, bottom-up, and interfacial characteristics of the composite material preparation process. Meanwhile, the modulation strategies of triboelectric properties of cellulosic triboelectric materials are presented. Furthermore, the design strategies of triboelectric materials such as surface functionalization, interfacial structure design, and vacuum-assisted self-assembly are systematically discussed. In particular, cellulosic self-powered wearable electronics in the fields of human energy harvesting, tactile sensing, health monitoring, human-machine interaction, and intelligent fire warning are outlined in detail. Finally, the current challenges and future development directions of cellulosic triboelectric materials for self-powered wearable electronics are discussed.

Fabrication of Advanced Cellulosic Triboelectric Materials via Dielectric Modulation.

The rapid rise of triboelectric nanogenerators (TENGs), which are emerging energy conversion devices in advanced electronics and wearable sensing systems, has elevated the interest in high-performance and multifunctional triboelectric materials. Among them, cellulosic materials, affording high efficiency, biodegradability, and customizability, are becoming a new front-runner. The inherently low dielectric constant limits the increase in the surface charge density. However, owing to its unique structure and excellent processability, cellulose shows great potential for dielectric modulation, providing a strong impetus for its advanced applications in the era of Internet of Things and artificial intelligence. This review aims to provide comprehensive insights into the fabrication of dielectric-enhanced cellulosic triboelectric materials via dielectric modulation. The exceptional advantages and research progress in cellulosic materials are highlighted. The effects of the dielectric constant, polarization, and percolation threshold on the charge density are systematically investigated, providing a theoretical basis for cellulose dielectric modulation. Typical dielectric characterization methods are introduced, and their technical characteristics are analyzed. Furthermore, the performance enhancements of cellulosic triboelectric materials endowed by dielectric modulation, including more efficient energy harvesting, high-performance wearable electronics, and impedance matching via material strategies, are introduced. Finally, the challenges and future opportunities for cellulose dielectric modulation are summarized.

Wearable Triboelectric Visual Sensors for Tactile Perception.

Tactile sensors with visible light feedback functions, such as wearable displays and electronic skin and biomedical devices, are becoming increasingly important in various fields. However, existing methods cannot meet the application requirements for the tactile perception of intensity feedback and extended intersection due to their limited light-mapping performance and insufficient portability. Herein, a freely constructible self-powered visual tactile sensor is proposed, which consists of a high-output triboelectric nanogenerator (TENG) and a visual light source. The transferred charge of the TENG is enhanced to 746 nC by the structural design of the triboelectric material and device, which can easily drive the light source to generate a light signal with a brightness of 9.8 cd m-2 . Notably, the application of the TENG enables to realization visual sensing of the palm-grasp state and strength feedback without an external power supply. This visual feedback and power-free tactile sensors are expected to have potential application in the field of artificial intelligence as a new interactive medium for smart protective clothing and robotics.

Nanogrinding/ethanol activation facilitating lignin fractionation for preparation of monodispersed lignin nanoparticles.

Lignin nanoparticles (LNPs), as one of green and sustainable biological macromolecules, have attracted great attention owing to their promising potentials in many valorized fields. However, the lignin heterogeneity seriously restricts the controllable preparation of LNPs. Herein, a facile nanogrinding activation combining anhydrous ethanol dissolution process was developed to efficiently homogenize lignin prior to gradient ethanol fractionation. Two lignin fractions were obtained from nanogrinding activation/ethanol dissolution followed by gradient ethanol fractionation: L-fractions and S-fractions. Therefore, monodispersed LNPs with unique concave hollow nanostructure and large particle size, and monodispersed LNPs with solid core nanostructure and small particle size were successfully prepared from L-fractions and S-fractions, respectively, via a GVL/water anti-solvent method. The proposed LNPs formation mechanisms facilitated by nanogrinding activation/ethanol dissolution treatment were demonstrated. This study put forwards a facile and green integrated approach for monodispersed LNPs preparation with controllable morphology and particle size.