Fouling behavior of nanofiltration membrane during the refining treatment of morphlines-dominant reverse osmosis concentrate.

Nanofiltration (NF) has been proven to be with great potential for the separation of morpholines with molecular weight less than 200 Da in refining reverse osmosis concentrate (ROC), but its application is significantly restricted by the membrane fouling, which can reduce the rejection and service time. To enable the long-term operation stability of nanofiltration, this work focuses on the fouling behavior of each substance in the hydrosaline organic solution on nanofiltration membrane, aiming to give insight into the fouling mechanism. To this end, in this work, the effects of salts (i.e NaCl and Na2SO4), organic substances (including N-(2-hydroxypropyl)morpholine(NMH) and 4-morpholineacetate(MHA)) and representative divalent ions (Ca2+ and Mg2+) on the performance and physicochemical properties of DK membrane were systematically investigated. The results show that both salts and organics can induce DK membrane swelling, leading to an increase of the mean effective pore size. After the filtration of Na2SO4-NaCl-H2O, the mean pore size increased by 0.002 nm, resulting in the decrease of the removal ratio of NMH and MHA for 3.82% and 13.10%, respectively. With static adsorption of NMH and MHA, the mean pore size of DK membrane increased by 0.005 and 0.003 nm. The swelling slowed the entrance of more organic molecules into membrane pores. Among them, MHA led to the terrible irreversible pore blocking. As the concentration of Ca2+ increased, gypsum scaling was formed on the membrane surface. During this process, NMH and MHA played different roles, i.e. NMH accelerated the CaSO4 crystallization while MHA inhibited. As a conclusion, the fouling behavior of substances in the high saline organic wastewater on DK membrane were systematically revealed with the fouling mechanisms proposed, which could provide an insightful guidance for membrane fouling control and cleaning in the treatment of high salinity and organic wastewater.

Psychometric validation of the PERMA-profiler for well-being in Chinese adults.

Well-being is one of the central topics in psychology, and research on this topic has shifted from emotional experiences to flourishing life in recent years. Seligman's PERMA model is a prominent theory in this shift. However, this model is proposed in Western culture and has yet to be empirically validated in the Chinese context. The present research aims to examine the applicability of the five-dimension PERMA-Profiler in Chinese culture, which has been developed based on the PERMA model. A sample of 1468 Chinese adults participated in the research. After translation and validation, a series of psychometric analyses were conducted to examine the internal consistency reliability, construct validity, convergent and discriminant validity, and factorial invariance across genders. The PERMA-Profiler Chinese showed high Cronbach's alpha coefficients (α = 0.79-0.88), good divergent (r = -0.19 to -0.38) and convergent validity (r = 0.53-0.85), as well as satisfactory structural validity. Results of the structural validity demonstrated a better fit to the first-order model with five correlated factors after modification (χ2/df = 4.65, RMSEA = 0.058, SRMR = 0.030, CFI = 0.943, TLI = 0.924) than the second-order model with a higher-order factor of well-being. However, the engagement dimension of the PERMA-Profiler Chinese could be improved further. In conclusion, the PERMA model is applicable to the Chinese culture, and the PERMA-Profiler provides a valid measure of well-being for Chinese adults.

Preparation of Antibacterial Biobased Fibers by Triaxial Microfluidic Spinning Technology Using Ionic Liquids as the Solvents.

Bacterial infections have become a serious threat to public health. The utilization of antibacterial textiles offers an effective way to combat bacterial infections at the source, instead of relying solely on antibiotic consumption. Herein, efficient and durable antibacterial fibers based on quercetin and cellulose were prepared by a triaxial microfluidic spinning technology using ionic liquids (ILs) as the solvents. It was indicated that the structure and properties of the antibacterial fibers were affected by the type of IL and the flow rates during the triaxial microfluidic spinning process. Quercetin regenerated from [Emim]Ac underwent structural transformation and obtained an increased water solubility, while quercetin regenerated from [Emim]DEP remained unchanged, which was proven by FI-IR, XRD, and UV analyses. Furthermore, antibacterial fibers regenerated from [Emim]Ac exhibited the highest antibacterial activity of 96.9% against S. aureus, achieved by reducing the inner-to-outer flow rate ratio to 0 and concentrating quercetin at the center of fibers. On the other hand, when [Emim]DEP was used as the solvent, balancing the inner-to-outer flow rate ratio to concentrate quercetin in the middle layer of the fiber was optimal for achieving the best antibacterial activity of 93.3% because it promised both the higher encapsulation efficiency and release rate. Computational fluid dynamics (CFD) mathematically predicted the solvent exchange process during triaxial spinning, explaining the influence of IL types and flow rates on quercetin distribution and encapsulation efficiency. It was indicated that optimizing the distribution of antibacterial agents within the fibers can fully unleash its antibacterial potential while preserving the mechanical properties of the fiber. Therefore, the proposed simple triaxial spinning strategy provides valuable insights into the design of biomedical materials.

Exploring hydrogen-bond structures in cellulose during regeneration with anti-solvent through two-dimensional correlation infrared spectroscopy.

Cellulose, renowned for its excellent biocompatibility, finds extensive applications in both industrial and laboratory settings. However, few studies have specifically addressed the mechanistic evolution of hydrogen bond networks in cellulose during the dissolution and regeneration processes. In this research, the regeneration mechanism of cellulose in water and ethanol is investigated through molecular dynamics simulations. The results indicate that the ability of water molecules to disrupt hydrogen bonds between cellulose and ionic liquids is stronger than that of ethanol, which is more conducive to promoting the regeneration of cellulose. Besides, the Fourier transform infrared spectroscopy coupled with two-dimensional correlation infrared spectroscopy techniques are employed to unveil the evolution sequence of hydrogen bonds during dissolution and regeneration: ν(OH) (absorbed water) â†’ ν(O3-H3···O5) (intrachain) â†’ ν(O6-H6···O3') (interchain) â†’ ν(O2-H2···O6) (intrachain) â†’ ν(OH) (free). This study not only enhances our understanding of the intricate hydrogen bond dynamics in cellulose dissolution and regeneration but also provides a foundation for the expanded application of cellulose in diverse fields.

Apical papilla stem cell-derived exosomes regulate lipid metabolism and alleviate inflammation in the MCD-induced mouse NASH model.

Stem cells from the apical papilla(SCAPs) exhibit remarkable tissue repair capabilities, demonstrate anti-inflammatory and pro-angiogenic effects, positioning them as promising assets in the realm of regenerative medicine. Recently, the focus has shifted towards exosomes derived from stem cells, perceived as safer alternatives while retaining comparable physiological functions. This study delves into the therapeutic implications of exosomes derived from SCAPs in the methionine-choline-deficient (MCD) diet-induced mice non-alcoholic steatohepatitis (NASH) model. We extracted exosomes from SCAPs. During the last two weeks of the MCD diet, mice were intravenously administered SCAPs-derived exosomes at two distinct concentrations (50 µg/mouse and 100 µg/mouse) biweekly. Thorough examinations of physiological and biochemical indicators were performed to meticulously evaluate the impact of exosomes derived from SCAPs on the advancement of NASH in mice induced by MCD diet. This findings revealed significant reductions in body weight loss and liver damage induced by the MCD diet following exosomes treatment. Moreover, hepatic fat accumulation was notably alleviated. Mechanistically, the treatment with exosomes led to an upregulation of phosphorylated adenosine monophosphate-activated protein kinase (p-AMPK) levels in the liver, enhancing hepatic fatty acid oxidation and transporter gene expression while inhibiting genes associated with fatty acid synthesis. Additionally, exosomes treatment increased the transcription levels of key liver mitochondrial marker proteins and the essential mitochondrial biogenesis factor. Furthermore, the levels of serum inflammatory factors and hepatic tissue inflammatory factor mRNA expression were significantly reduced, likely due to the anti-inflammatory phenotype induced by exosomes in macrophages. The above conclusion suggests that SCAPs-exosomes can improve NASH.

Assessment of sediment transport in Luxiapuqu watershed using RUSLE-TLSD and InSAR techniques: Yarlung Tsangpo River, China.

The Yarlung Tsangpo River Basin is characterized by its intricate topography and a significant presence of erosive materials. These often coincide with heavy localized precipitation, resulting in pronounced hydraulic erosion and geological hazards in mountainous regions. To tackle this challenge, we integrated the RUSLE-TLSD (Revised Universal Soil Loss Equation-Transportation-limited sediment delivery) model with InSAR (Interferometric Synthetic Aperture Radar) data, aiming to explore the sediment transport process and pinpoint hazard-prone sites within mountainous small watershed. The RUSLE-TLSD model aids in evaluating multi-year sediment transport dynamics in mountainous zones. And, the InSAR data precisely delineates changes in sediment scouring and siltation at sites vulnerable to hazards. Our research estimates that the potential average soil erosion within the watershed stands at 52.33 t/(hm2 a), with a net soil erosion of 0.69 t/(hm2 a), the sediment transport pathways manifest within the watershed's gullies and channels. Around 4.32% of the watershed area undergoes sedimentation, predominantly at the base of slopes and within channels. Notably, areas (d) and (e) emerge as the most susceptible to disasters within the watershed. Further analysis of the InSAR data highlighted four regions in the typical area (e) from 2017 that are either sedimentation- or erosion-prone, referred to as "hotspots." Among them, R1 exhibits a strong interplay between water and sediment, rendering it highly sensitive to environmental factors. In contrast, R4, characterized by a sharp bend in siltation, remains relatively impervious to external elements. The NDVI (normalized difference vegetation index) stands out as the pivotal determinant influencing sediment transport within the watershed, exerting a pronounced impact on the outlet section, especially in spring. By employing this approach, we gained a deeper understanding of sediment transport mechanisms and potential hazards in small watershed in uninformative mountainous areas. This study furnishes a robust scientific framework beneficial for erosion mitigation and disaster surveillance in mountainous watersheds.

Nanofluid-Guided Janus Membrane for High-Efficiency Electricity Generation from Water Evaporation.

Harvesting electricity from widespread water evaporation provides an alternative route to cleaner power generation technology. However, current evaporation power generation (EPG) mainly depends on the dissociation process of certain functional groups (e.g., SO3H) in water, which suffers from low power density and short-term output. Herein, the Janus membrane is prepared by combining nanofluid and water-grabbing material for EPG, where the nanoconfined ionic liquids (NCILs) serve as ion sources instead of the functional groups. Benefiting from the selective and fast transport of anions in NCILs, such EPG demonstrates excellent power performance with a voltage of 0.63 V, a short-circuit current of 140 µA, and a maximum power density of 16.55 µW cm-2 while operating for at least 180 h consistently. Molecular dynamics (MD) simulation and surface potential analysis reveal the molecular mechanism, that is, the diffusion of Cl- anions during evaporation is much faster than that of cations, generating the voltage and current across the membrane. Furthermore, the device performs well in varying environmental conditions, including different water temperatures and sources of evaporating water, showcasing its adaptability and integrability. Overall, the nanofluid-guided Janus membrane can efficiently transform low-grade thermal energy in evaporation into electricity, showing a competitive advantage over other sustainable applied approaches.

Ternary Dry Powder Agglomerate Inhalation Formulation of Melatonin With Air Jet Mixing to Improve In Vitro And In Vivo Performance.

An improved agglomerate formulation with melatonin and fine lactose for dry powder inhalation using Turbuhaler® was developed. Co-grinding lactose with 1 % magnesium stearate prior to air jet mixing served as a key factor to improve the in vitro aerosolization and in vivo efficacy. Elevated mixing pressure facilitated the dispersion and homogenization of the cohesive mixture for even distribution of agglomerate size after spheroidization and subsequent higher emitted dose with lower variation. Magnesium stearate was employed as a tertiary component to adjust the interparticle force for better aerosolization. At optimized mixing pressure, co-grinding lactose with magnesium stearate before jet mixing displayed further improvement of fine particle fraction to 71.6 ± 3.1 %. The superior fine particle deposition efficiency contributed to rapid onset of action and a high bioavailability of 67.0 % after intratracheal administration to rats. Overall, an inhalable melatonin dry powder formulation exhibiting good aerosol property and lung deposition with clinical translation potential was developed.

Structure and properties variations of regenerated cellulose fibers induced by metal ion impurity.

In the ionic liquids (ILs) method for processing regenerated cellulose fiber (RCF), which is a high-performance ecologically benign product, metal ion impurities (such as Fe3+ and Cu2+) of cellulose might inevitably remain in the recycled ILs and coagulation bath. The presence of metal ions might negatively impact the properties of the manufactured RCFs and obstruct their applications, which are urgent to be made clear. For this research, the solvent for dissolving wood pulp cellulose (WPC) was 1-ethyl-3-methylimidazolium diethyl phosphate ([Emim]DEP) with various metal ion concentrations. The effect of metal ions in IL on the dissolution of cellulose was investigated by Molecular Dynamics simulations. Rheological analysis and degree of polymerization (DP) analysis were adopted to evaluate the influence on fiber spinnability of different spinning solution metal ion concentrations and various dissolving times. Further, the morphology and mechanical performances of the RCFs variation regulation were also thoroughly researched. The findings showed that the presence of metal ions in the spinning solution affected the DP, crystallinity, and orientation factor of RCFs, which will influence their stress more sensitively than the strain. These findings can serve as a practical guide for the commercial manufacture of emerging fiber.

Alcoholamine enhanced fractionation of cellulose from lignocellulosic biomass in ionic liquids.

Ionic liquid based technology is promising in the pretreatment of lignocelluloses. More efforts are still being made to intensify the separation of the main components in this biomass and to inhibit biopolymer degradation, especially in the fabrication of functional materials where excellent mechanical properties are often requisite. In this study, additives with amino and/or hydroxyl groups were proposed to improve the dissolution of lignocellulosic biomass in ionic liquids and to inhibit the degradation of cellulose. Among the tested additives (i.e., urea, L-2-aminobutyric acid, DL-aminopropanol, 3-aminopropanol and ethanolamine), 3-aminopropanol showed the best performance in enhancing wheat straw dissolution and cellulose recovery in 1-ethyl-3-methylimidazolium acetate ([EMIM]Ac). Further study revealed that this additive could also inhibit cellulose degradation in [EMIM]Ac. The interactions between the ionic liquid and additive were revealed by NMR and IR analysis. It was found that the formation of hydrogen bonds between 3-aminopropanol and [EMIM]Ac changed the interactions between ionic liquids and biomass, resulting in improved dissolution efficiency and inhibition of cellulose degradation. Optimization investigation showed that when using the 3-aminopropanol/[EMIM]Ac composite system as the solvent and pine as the raw biomass, the cellulose content in the recovered cellulose-rich material was increased from 33.3% (for the raw pine) to 66.9%. Correspondingly, the regenerated cellulose spinning in the composite system exhibited improved mechanical properties, with the elongation at break reaching 15.6% and the tensile fracture strength of 184.1 N per tex (in comparison with 9.6% for elongation at break and 99.7 N per tex for tensile fracture strength for the sample obtained in neat [EMIM]Ac).

Lathyrane diterpenoids from Euphorbia lathyris induce cell-cycle arrest and apoptosis in human hypertrophic scar cells.

One new lathyrane-type diterpenoid, euphlathin A (1), and 11 known analogues (2-12), were isolated from the fruits of Euphorbia lathyris. Their structures were elucidated by spectroscopic data. The absolute configurations of 1 were established by single-crystal X-ray crystallography. All diterpenoids (1-12) were evaluated for antiproliferative activity against the human hypertrophic scar (HTS) cells. Compound 1 exhibited significantly against HTS cells growth with an IC50 value of 6.33 µM. Morphological features of apoptosis were evaluated in 1-treated HTS cells. Wound healing assays indicated that 1 significantly inhibited the migration of HTS at 24 h and 48 h. Compound 1 effectively induced apoptosis of HTS, which was associated with G2/M or S phase cell cycle arrest. Flow cytometric analysis showed that the treatment by 1 significantly induced HTS cell apoptosis in a dose-dependent manner. Overall, euphlathin A (1) has the potential to be a therapeutic agent for the treatment of hyperplastic scar therapy.

Clinicopathological characteristics, molecular landscape, and biomarker landscape for predicting the efficacy of PD-1/PD-L1 inhibitors in Chinese population with mismatch repair deficient urothelial carcinoma: a real-world study.

Urothelial carcinoma (UC) with deficient mismatch repair (dMMR) is a specific subtype of UC characterized by the loss of mismatch repair (MMR) proteins and its association with Lynch syndrome (LS). However, comprehensive real-world data on the incidence, clinicopathological characteristics, molecular landscape, and biomarker landscape for predicting the efficacy of PD-1/PD-L1 inhibitors in the Chinese patients with dMMR UC remains unknown. We analyzed 374 patients with bladder urothelial carcinoma (BUC) and 232 patients with upper tract urothelial carcinoma (UTUC) using tissue microarrays, immunohistochemistry, and targeted next-generation sequencing. Results showed the incidence of dMMR UC was higher in the upper urinary tract than in the bladder. Genomic analysis identified frequent mutations in KMT2D and KMT2C genes and LS was confirmed in 53.8% of dMMR UC cases. dMMR UC cases displayed microsatellite instability-high (MSI-H) (PCR method) in 91.7% and tumor mutational burden-high (TMB-H) in 40% of cases. The density of intratumoral CD8+ T cells correlated with better overall survival in dMMR UC patients. Positive PD-L1 expression was found in 20% cases, but some patients positively responded to immunotherapy despite negative PD-L1 expression. Our findings provide valuable insights into the characteristics of dMMR UC in the Chinese population and highlights the relevance of genetic testing and immunotherapy biomarkers for treatment decisions.

Citrus peel extract protects against diesel exhaust particle-induced chronic obstructive pulmonary disease-like lung lesions and oxidative stress.

Chronic obstructive pulmonary disease (COPD) is the third leading cause of death worldwide and characterized by emphysema, small airway remodeling and mucus hypersecretion. Citrus peels have been widely used as food spices and in traditional Chinese medicine for chronic lung disease. Given that citrus peels are known for containing antioxidants and anti-inflammatory compounds, we hypothesize that citrus peel intake can suppress oxidative stress and inflammatory response to air pollution exposure, thereby alleviating COPD-like pathologies. This study aimed to investigate the efficacy of citrus peel extract, namely Guang Chenpi (GC), in preventing the development of COPD induced by diesel exhaust particles (DEPs) and its potential mechanism. DEP-induced COPD-like lung pathologies, inflammatory responses and oxidative stress with or without GC treatment were examined in vivo and in vitro. Our in vivo study showed that GC was effective in decreasing inflammatory cell counts and inflammatory mediator (IL-17A and TNF-α) concentrations in bronchoalveolar lavage fluid (BALF). Pretreatment with GC extract also significantly decreased oxidative stress in the serum and lung tissue of DEP-induced COPD rats. Furthermore, GC pretreatment effectively reduced goblet cell hyperplasia (PAS positive cells) and fibrosis of the small airways, decreased macrophage infiltration as well as carbon loading in the peripheral lungs, and facilitated the resolution of emphysema and small airway remodeling in DEP-induced COPD rats. An in vitro free radical scavenging assay revealed robust antioxidant potential of GC in scavenging DPPH free radicals. Moreover, GC demonstrated potent capacities in reducing ROS production and enhancing SOD activity in BEAS-2B cells stimulated by DEPs. GC treatment significantly attenuated the increased level of IL-8 and MUC5AC from DEP-treated BEAS-2B cells. Mechanistically, GC treatment upregulated the protein level of Nrf-2 and could function via MAPK/NF-κB signaling pathways by suppressing the phosphorylation of p38, JNK and p65. Citrus peel extract is effective in decreasing oxidative stress and inflammatory responses of the peripheral lungs to DEP exposure. These protective effects further contributed to the resolution of COPD-like pathologies.

Transcription between human-readable synthetic descriptions and machine-executable instructions: an application of the latest pre-training technology.

AI has been widely applied in scientific scenarios, such as robots performing chemical synthetic actions to free researchers from monotonous experimental procedures. However, there exists a gap between human-readable natural language descriptions and machine-executable instructions, of which the former are typically in numerous chemical articles, and the latter are currently compiled manually by experts. We apply the latest technology of pre-trained models and achieve automatic transcription between descriptions and instructions. We design a concise and comprehensive schema of instructions and construct an open-source human-annotated dataset consisting of 3950 description-instruction pairs, with 9.2 operations in each instruction on average. We further propose knowledgeable pre-trained transcription models enhanced by multi-grained chemical knowledge. The performance of recent popular models and products showing great capability in automatic writing (e.g., ChatGPT) has also been explored. Experiments prove that our system improves the instruction compilation efficiency of researchers by at least 42%, and can generate fluent academic paragraphs of synthetic descriptions when given instructions, showing the great potential of pre-trained models in improving human productivity.

Characteristics of glioblastomas and immune microenvironment in a Chinese family with Lynch syndrome and concurrent porokeratosis.

Background: Lynch syndrome (LS)-associated glioblastoma (GBM) is rare in clinical practice, and simultaneous occurrence with cutaneous porokeratosis is even rarer. In this study, we analyzed the clinicopathological and genetic characteristics of LS-associated GBMs and concurrent porokeratosis, as well as evaluated the tumor immune microenvironment (TIME) of LS-associated GBMs. Methods: Immunohistochemical staining was used to confirm the histopathological diagnosis, assess MMR and PD-1/PD-L1 status, and identify immune cell subsets. FISH was used to detect amplification of EGFR and PDGFRA, and deletion of 1p/19q and CDKN2A. Targeted NGS assay analyzed somatic variants, MSI, and TMB status, while whole-exome sequencing and Sanger sequencing were carried out to analyze the germline mutations. Results: In the LS family, three members (I:1, II:1 and II:4) were affected by GBM. GBMs with loss of MSH2 and MSH6 expression displayed giant and multinucleated bizarre cells, along with mutations in ARID1A, TP53, ATM, and NF1 genes. All GBMs had TMB-H but not MSI-H. CD8+ T cells and CD163+ macrophages were abundant in each GBM tissue. The primary and recurrent GBMs of II:1 showed mesenchymal characteristics with high PD-L1 expression. The family members harbored a novel heterozygous germline mutation in MSH2 and FDPS genes, confirming the diagnosis of LS and disseminated superficial actinic porokeratosis. Conclusion: LS-associated GBM exhibits heterogeneity in clinicopathologic and molecular genetic features, as well as a suppressive TIME. The presence of MMR deficiency and TMB-H may serve as predictive factors for the response to immune checkpoint inhibitor therapy in GBMs. The identification of LS-associated GBM can provide significant benefits to both patients and their family members, including accurate diagnosis, genetic counseling, and appropriate screening or surveillance protocols. Our study serves as a reminder to clinicians and pathologists to consider the possibility of concurrent genetic syndromes in individuals or families.

Functional materials of 3D bioprinting for wound dressings and skin tissue engineering applications: A review.

The skin plays an important role in vitamin D synthesis, humoral balance, temperature regulation, and waste excretion. Due to the complexity of the skin, fluids loss, bacterial infection, and other life-threatening secondary complications caused by skin defects often lead to the damage of skin functions. 3D bioprinting technology, as a customized and precise biomanufacturing platform, can manufacture dressings and tissue engineering scaffolds that accurately simulate tissue structure, which is more conducive to wound healing. In recent years, with the development of emerging technologies, an increasing number of 3D-bioprinted wound dressings and skin tissue engineering scaffolds with multiple functions, such as antibacterial, antiinflammatory, antioxidant, hemostatic, and antitumor properties, have significantly improved wound healing and skin treatment. In this article, we review the process of wound healing and summarize the classification of 3D bioprinting technology. Following this, we shift our focus on the functional materials for wound dressing and skin tissue engineering, and also highlight the research progress and development direction of 3D-bioprinted multifunctional wound healing materials.

Effective Absorption of Dichloromethane Using Carboxyl-Functionalized Ionic Liquids.

Dichloromethane (DCM) is recognized as a very harmful air pollutant because of its strong volatility and difficulty to degrade. Ionic liquids (ILs) are considered as potential solvents for absorbing DCM, while it is still a challenge to develop ILs with high absorption performances. In this study, four carboxyl-functionalized ILs-trioctylmethylammonium acetate [N1888][Ac], trioctylmethylammonium formate [N1888][FA], trioctylmethylammonium glycinate [N1888][Gly], and trihexyl(tetradecyl)phosphonium glycinate [P66614][Gly]-were synthesized for DCM capture. The absorption capacity follows the order of [P66614][Gly] > [N1888][Gly] > [N1888][FA] > [N1888][Ac], and [P66614][Gly] showed the best absorption capacity, 130 mg DCM/g IL at 313.15 K and a DCM concentration of 6.1%, which was two times higher than the reported ILs [Beim][EtSO4] and [Emim][Ac]. Moreover, the vapor-liquid equilibrium (VLE) of the DCM + IL binary system was experimentally measured. The NRTL (non-random two-liquid) model was developed to predict the VLE data, and a relative root mean square deviation (rRMSD) of 0.8467 was obtained. The absorption mechanism was explored via FT-IR spectra, 1H-NMR, and quantum chemistry calculations. It showed a nonpolar affinity between the cation and the DCM, while the interaction between the anion and the DCM was a hydrogen bond. Based on the results of the study of the interaction energy, it was found that the hydrogen bond between the anion and the DCM had the greatest influence on the absorption process.

Preparation and curing behaviour of microencapsulated curing agents for cold-mixed epoxy asphalt.

This study aimed to improve control over the curing behaviour of cold-mixed epoxy asphalt by using a microencapsulated curing agent (2-PZ@PC). Prepared through solvent evaporation, the 2-PZ@PC microcapsules had 2-phenylimidazole as the core material and polycarbonate as the shell material. The research examined the impact of core-shell mass ratio on microcapsule morphology and composition. Various equations, including the kinetics equation, Kissinger equation, Flynn-Wall-Ozawa, and Crane equations, were employed to assess the sustained release effect of 2-PZ@PC microcapsules on epoxy resin curing behaviour. Fluorescence microscopy and viscosity experiments were used to observe the release state of microcapsules and confirm the retardation phenomenon during construction. Optimal 2-PZ@PC microcapsules displayed a smooth spherical morphology and a maximum encapsulation rate of 32 wt% at a 1:1 core-shell ratio. The microencapsulated curing agent effectively regulated cold-mixed epoxy asphalt's curing behaviour, enhancing retention time control and application reliability.

An efficient method for improving the stability of Monascus pigments using ionic gelation.

BACKGROUND: Monascus pigments (Mps) are easily impacted by heating, pH and light, resulting in degradation. In this study, Mps were encapsulated by the ionic gelation method with sodium alginate (SA) and sodium caseinate (SC), as well as CaCl2 as a crosslinker. The encapsulated Mps SA/SC in four proportions (SA/SC: 1/4, 2/3, 3/2, 4/1, w/w). Then, the encapsulation efficiency and particle size of the SA/SC-Mps system were evaluated to obtain the optimal embedding conditions. Finally, the effects of heating, pH, light and storage on the stability of non-capsulated Mps and encapsulated Mps were assessed. RESULTS: SA/SC = 2/3 (AC2) had higher encapsulation efficiency (74.30%) of Mps and relatively small particle size (2.02 mm). The AC2 gel beads were chosen for further investigating the stability of encapsulated Mps to heating, pH, light and storage. Heat stability experiments showed that the degradation of Mps followed first-order kinetics, and the encapsulated Mps had lower degradation rates than non-capsulated Mps. Encapsulation could reduce the effect of pH on Mps. The effects of ultraviolet light on the stability of Mps were considered, and showed that the retention efficiency of encapsulated Mps was 22.01% higher than that of non-capsulated Mps on the seventh day. Finally, storage stability was also evaluated under dark refrigerated conditions for 30 days, and the results indicated that encapsulation could reduce the degradation of Mps. CONCLUSION: This study has proved that AC2 gel beads can improve the stability of Mps. Thus, the ionic gelation method is a promising encapsulation method to improve the stability of Mps. © 2023 Society of Chemical Industry.