A novel premixing strategy for highly sensitive detection of nitrite on paper-based analytical devices.

BACKGROUND: Nitrite has been involved in many food processing techniques and its excessive consumption is closely related to the development of different diseases. Therefore, highly sensitive detection of nitrite is significant to ensure food safety. RESULT: This study presents a simple and novel strategy for the highly sensitive detection of nitrite in food using paper-based analytical devices (PADs). In this proposed strategy, the nitrite present in the sample undergoes efficient diazotization when initially mixed with sulfanilamide solution before reacting with N-(1-naphthyl) ethylenediamine dihydrochloride (NED) coated on the detection region of the PAD, leading to the maximum production of colored azo compounds. Specifically, within the concentration range of 0.1-20 mg/L, the LOD and LOQ for the nitrite assay using the premixing strategy are determined as 0.053 mg/L and 0.18 mg/L, respectively which significantly surpass the corresponding values of 0.18 mg/L (LOD) and 0.61 mg/L (LOQ) achieved with the regular Griess reagent analysis. SIGNIFICANCE: The study highlights the critical importance of the premixing strategy in nitrite detection. Under optimized conditions, the strategy demonstrates an excellent limit of detection (LOD) and limit of quantification (LOQ) for nitrite detection in eight different meat samples. In addition to its high precision, the strategy is applicable in the field of nitrite analysis. This strategy could facilitate rapid and cost-effective nitrite analysis in real food samples, ensuring food safety and quality analysis.

Making commercial bracelet smarter with a biochemical button module.

Despite the rapid development of mobile health based on wearable devices in recent years, lack of access to biochemical detection remains a vital challenge for most commercial wearable devices, which hinders the provision of effective electronic health records (EHRs) for disease control strategies, and further constraining the development of personalized precision medicine. Herein, we propose a strategy to graft biochemical detection function onto commercial bracelet. Different from the conventional development process of designing a completely new wearable biochemical device, we prefer to upgrade existing commercial wearable device to achieve simpler, faster, and more effective research and commercialization processes. An affordable and user-friendly biochemical button module has been designed that enables to integrate sensitive, specific, and rapid biochemical detection function into the idle space on the strap of the bracelet without increasing the size of the main body. This "Smart Bracelet Plus" shows the ability to simultaneously monitor physical and biochemical signals, and will serve as a reliable and systematic personal diagnostics and monitoring platform for providing real-time EHRs for disease control strategies and improving the efficiency of the healthcare system.

Fluoropolymer Functionalization of Organ-on-Chip Platform Increases Detection Sensitivity for Cannabinoids.

Microfluidic technology is applied across various research areas including organ-on-chip (OOC) systems. The main material used for microfluidics is polydimethylsiloxane (PDMS), a silicone elastomer material that is biocompatible, transparent, and easy to use for OOC systems with well-defined microstructures. However, PDMS-based OOC systems can absorb hydrophobic and small molecules, making it difficult and erroneous to make quantitative analytical assessments for such compounds. In this paper, we explore the use of a synthetic fluoropolymer, poly(4,5-difluoro-2,2-bis(trifluoromethyl)-1,3-dioxole-co-tetrafluoroethylene) (Teflon™ AF 2400), with excellent "non-stick" properties to functionalize OOC systems. Cannabinoids, including cannabidiol (CBD), are classes of hydrophobic compounds with a great potential for the treatment of anxiety, depression, pain, and cancer. By using CBD as a testing compound, we examined and systematically quantified CBD absorption into PDMS by means of an LC-MS/MS analysis. In comparison to the unmodified PDMS microchannels, an increase of approximately 30× in the CBD signal was detected with the fluoropolymer surface modification after 3 h of static incubation. Under perfusion conditions, we observed an increase of nearly 15× in the CBD signals from the surface-modified microchannels than from the unmodified microchannels. Furthermore, we also demonstrated that fluoropolymer-modified microchannels are compatible for culturing hCMEC/D3 endothelial cells and for CBD perfusion experiments.

Development of a pumpless acoustofluidic device for rapid food pathogen detection.

Mixing, homogenization, separation, and filtration are crucial processes in miniaturized analytical systems employed for in-vitro biological, environmental, and food analysis. However, in microfluidic systems achieving homogenization becomes more challenging due to the laminar flow conditions, which lack the turbulent flows typically used for mixing in traditional analytical systems. Here, we introduce an acoustofluidic platform that leverages an acoustic transducer to generate microvortex streaming, enabling effective homogenizing of food samples. To reduce reliance on external equipment, tubing, and pump, which is desirable for Point-of-Need testing, our pumpless platform employs a hydrophilic yarn capable of continuous wicking for sample perfusion. Following the homogenization process, the platform incorporates an array of micropillars for filtering out large particles from the samples. Additionally, the porous structure of the yarn provides a secondary screening mechanism. The resulting system is compact, and reliable, and was successfully applied to the detection of Escherichia coli (E. coli) in two different types of berries using quantitative polymerase chain reaction (qPCR). The platform demonstrated a detection limit of 5 CFU g-1, showcasing its effectiveness in rapid and sensitive pathogen detection.

Microfluidic-assisted fiber production: Potentials, limitations, and prospects.

Besides the conventional fiber production methods, microfluidics has emerged as a promising approach for the engineered spinning of fibrous materials and offers excellent potential for fiber manufacturing in a controlled and straightforward manner. This method facilitates low-speed prototype synthesis of fibers for diverse applications while providing superior control over reaction conditions, efficient use of precursor solutions, reagent mixing, and process parameters. This article reviews recent advances in microfluidic technology for the fabrication of fibrous materials with different morphologies and a variety of properties aimed at various applications. First, the basic principles, as well as the latest developments and achievements of microfluidic-based techniques for fiber production, are introduced. Specifically, microfluidic platforms made of glass, polymers, and/or metals, including but not limited to microfluidic chips, capillary-based devices, and three-dimensional printed devices are summarized. Then, fiber production from various materials, such as alginate, gelatin, silk, collagen, and chitosan, using different microfluidic platforms with a broad range of cross-linking agents and mechanisms is described. Therefore, microfluidic spun fibers with diverse diameters ranging from submicrometer scales to hundreds of micrometers and structures, such as cylindrical, hollow, grooved, flat, core-shell, heterogeneous, helical, and peapod-like morphologies, with tunable sizes and mechanical properties are discussed in detail. Subsequently, the practical applications of microfluidic spun fibers are highlighted in sensors for biomedical or optical purposes, scaffolds for culture or encapsulation of cells in tissue engineering, and drug delivery. Finally, different limitations and challenges of the current microfluidic technologies, as well as the future perspectives and concluding remarks, are presented.

3D-printed solar evaporator with seashell ornamentation-inspired structure for zero liquid discharge desalination.

Solar-driven interfacial evaporation has enormous promise for fresh water recovery and salt harvesting, but salt accumulation-related challenges stand in its way. Herein, we report a spined groove-ridge pairs inspired by the shell ornamentation of the Vasticardium vertebratum, which addresses salt accumulation by artfully integrating salt reflux into localized salt crystallization. The seashell-mimetic radial V-groove array enables the 3D evaporator to transport water rapidly and directionally, resulting in high-performance water evaporation (∼95% efficiency) and localized crystallization. The periodic spines enlightened by the spine-bearing ridge on the seashell provide considerable micro-unit salt reflux. The 2-in-1 integration design endows the three-dimensional evaporator with superior solar-driven zero liquid discharge and excellent long-term salt resistance even when dealing with high-salinity brine (20 wt% NaCl) and a series of heavy metallic salt solutions. Our design offers a new alternative solution to avoiding salt scaling and could advance locally crystallized solar evaporators towards practical applications.

Surface-Enhanced Raman Spectroscopy Substrates for Food Safety and Quality Analysis.

Surface-enhanced Raman spectroscopy (SERS) has been identified as a fundamental surface-sensitive technique that boosts Raman scattering by adsorbing target molecules on specific surfaces. The application of SERS highly relies on the development of smart SERS substrates, and thus the fabrication of SERS substrates has been constantly improved. Herein, we investigate the impacts of different substrates on SERS technology including plasmonic metal nanoparticles, semiconductors, and hybrid systems in quantitative food safety and quality analysis. We first discuss the fundamentals, substrate designs, and applications of SERS. We then provide a critical review of the recent progress of SERS in its usage for screening and detecting chemical and biological contaminants including fungicides, herbicides, insecticides, hazardous colorants, and biohazards in food samples to assess the analytical capabilities of this technology. Finally, we investigate the future trends and provide practical techniques that could be used to fulfill the requirements for rapid analysis of food at a low cost.

Textiles in soft robots: Current progress and future trends.

Soft robotics have substantial benefits of safety, adaptability, and cost efficiency compared to conventional rigid robotics. Textiles have applications in soft robotics either as an auxiliary material to reinforce the conventional soft material or as an active soft material. Textiles of various types and configurations have been fabricated into key components of soft robotics in adaptable formats. Despite significant advancements, the efficiency and characteristics of textile actuators in practical applications remain unsatisfactory. To address these issues, novel structural and material designs as well as new textile technologies have been introduced. Herein, we aim at giving an insight into the current state of the art in textile technology for soft robotic manufacturing. We firstly discuss the fundamental actuation mechanisms for soft robotics. We then provide a critical review on the recently developed functional textiles as reinforcements, sensors, and actuators in soft robotics. Finally, the future trends and current strategies that can be employed in textile-based actuator manufacturing process have been explored to address the critical challenges in soft robotics.

Paper-based analytical device for high-throughput monitoring tetracycline residue in milk.

A low-cost and portable paper-based analytical device has been developed for high throughput and on-site monitoring TC residue in milk through visualized colorimetric reaction. The filtration and concentration effect induced by the porous nature of paper contribute to strengthen the color intensity, leading to quantitative and sensitive detection of tetracycline reaching 1 ppm detection limit, with the linear range of 1-100 ppm both in water and milk samples. The applicability was demonstrated by detection of TC in 18 different types of real milk samples with good recovery ranging from 88% to 113%. Furthermore, the dynamic degradation behavior of tetracycline was monitored through the device. To the best of our knowledge, this is the first report of colorimetric detection of tetracycline in milk using the paper-based device. This simple, fast, cost-effective (~$0.50 per device) and equipment-free paper-based platform provides a promising tool for future application in food and environmental safety.

From brown to colored: Polylactic acid composite with micro/nano-structured white spent coffee grounds for three-dimensional printing.

Functional fillers in three-dimensional (3D) printing composite filaments offer an innovative way spent coffee grounds (SCGs) can be reused. However, the inherent brownness of SCGs places a limit on the color in which the composite filament and, consequently, the finished print appears. Herein, colored composite filaments for fused deposition modeling were successfully fabricated, where micro/nano-structured decolorized SCGs (MN-DSCGs) were embedded within polylactic acid (PLA) matrix. At the optimum condition, the 3D prints using composite filaments exhibit comparable tensile and flexural strength to the PLA counterparts. Also, they demonstrate superior melt flow and excellent print quality. Under the same condition, 3D printed MN-DSCGs/PLA blend has sufficient color restoration as compared to the prints using virgin PLA.

Active Packaging of Immobilized Zinc Oxide Nanoparticles Controls Campylobacter jejuni in Raw Chicken Meat.

Zinc oxide nanoparticles (ZnO NPs) are regarded as a safe and stable antimicrobial that can inactivate bacteria by several potential working mechanisms. We aimed to incorporate ZnO NPs into packaging material to control Campylobacter in raw chicken meat. ZnO NPs were first incorporated into three-dimensional (3D) paper tubes to identify the lethal concentration against Campylobacter jejuni, which was selected as the working concentration to develop 2D functionalized absorbing pads by an ultrasound-assisted dipping technique. The functionalized pad was placed underneath raw chicken meat to inactivate C. jejuni and the predominant chicken microbiota at 4°C within 8 days of storage. Immobilized ZnO NPs at 0.856 mg/cm2 reduced C. jejuni from ∼4 log CFU/25 g raw chicken meat to an undetectable level after 3 days of storage. Analysis by inductively coupled plasma-optical emission spectroscopy showed that the Zn level increased from 0.02 to 0.17 mg/cm2 in treated raw chicken meat. Scanning electron microscopy validated the absence of nanoparticle migration onto raw chicken meat after treatment. Inactivation of C. jejuni was associated with the increase of lactic acid produced by Lactobacillus in raw chicken meat in a pH-dependent manner. Less than 5% of Zn2+ was released from ZnO NPs at neutral pH, while up to 88% was released when the pH was <3.5 within 2 days. Whole-transcriptome sequencing (RNA-Seq) analysis demonstrated a broad effect of ZnO NPs on genes involved in various cellular developmental processes as annotated by gene ontology. Taken together, the results indicate that functionalized absorbing pads inactivated C. jejuni in raw chicken meat by immobilized ZnO NPs along with the controllable released Zn2+IMPORTANCE Prevalence of Campylobacter in raw poultry remains a major food microbiological safety challenge. Novel mitigation strategies are required to ensure the safety and quality of poultry products. Active food packaging can control pathogens without directly adding antimicrobials into the food matrix and extend the food's shelf life. The functionalized absorbing pad with ZnO NPs developed in this study was able to inactivate C. jejuni in raw chicken meat and keep the meat free from C. jejuni contamination during shelf life without any observed migration of nanoparticles. The controllable conversion of immobilized ZnO NPs to free Zn2+ makes this approach safe and eco-friendly and paves the way for developing a novel intervention strategy for other high-risk foods. Our study applied nanotechnology to exploit an effective approach for Campylobacter control in raw chicken meat products.

Unlocking the Potential of Organ-on-Chip Models through Pumpless and Tubeless Microfluidics.

Microfluidic organs-on-chips are rapidly being developed toward eliminating the shortcomings of static in vitro models and better addressing basic and translational research questions. A critical aspect is the dynamic culture environment they provide. However, the associated inherent requirement for controlled fluid shear stress (FSS) and therefore the need for precise pumps limits their implementation. To address this issue, here a novel approach to manufacture pumpless and tubeless organs-on-chips is reported. It relies on the use of a hydrophilic thread to provide a driving force for the perfusion of the cell culture medium through constant evaporation in the controlled conditions of a cell incubator. Well-defined and tuneable flow rates can be applied by adjusting the length and/or diameter of the thread. This approach for the preparation of an intestine-on-chip model based on the Caco-2 cell line is validated. Five days culture under 0.02 dyn·cm-2 shear conditions yield monolayers similar to those prepared using a high-precision peristaltic pump. A pumpless device can also be used to delineate the effect of FSS on the phenotype of adenocarcinomic human alveolar basal epithelial A549 cells. It is anticipated that the pumpless approach will facilitate and herefore increase the use of organs-on-chips models in the future.

Development of paper-based microfluidic device for the determination of nitrite in meat.

This study employed the use of a microfluidic paper-based analytical device (µPAD) to determine the concentration of nitrite in pork and enhanced the limit of detection by analyzing the coffee-ring effect. The µPAD was fabricated by designing and embedding wax channels onto the cellulose-based filter paper through printing and subjecting the paper to heat treatment to allow wax penetration. Nitrite concentration was determined by monitoring the colorimetric reaction that occurred between nitrite and the added Griess reagent. The limit of detection of this device for nitrite in pork was determined to be 19.2 mg kg-1 by analyzing the inner-chamber reaction, while it could be as low as 1.1 mg kg-1 if the coffee-ring region was analyzed. The overall analysis could be completed within 15 min. This µPAD-based method has potential applications to routinely screen the nitrite concentration of meat products and ensure food safety and consumer health.

Determination of norfloxacin residues in foods by exploiting the coffee-ring effect and paper-based microfluidics device coupling with smartphone-based detection.

By utilizing the coffee-ring effect and microfluidic paper-based analytical devices (µPADs), this study improved the sensitivity of the determination of norfloxacin in four different food matrices. Micro-PADs in this study were fabricated by designing and embedding wax channels onto cellulose-based filter paper through printing and subjecting the paper to heat to allow the wax to penetrate the paper. Determination of norfloxacin concentration in food samples was achieved by monitoring the colorimetric reaction that occurred between norfloxacin and the added iron (III) nitrate nonahydrate in 5 mM ammonia in each reaction chamber. A transition metal hydroxide was formed through this reaction that resulted in the formation of a solid precipitate to enable the antibiotic to bind to the iron molecule via coordination chemistry. This metal ion-antibiotic complex generated a visible color change. Following the colorimetric reaction, images were taken and subsequently analyzed via ImageJ to determine the relative pixel intensity that was used to infer norfloxacin concentration. The analytical sensitivity of this device was determined to be as low as 50 ppm when analyzing the inner-ring reaction, and as low as 5 ppm when analyzing the outer coffee ring thereby allowing for an alternative cheaper, faster, and more user-friendly method to detect norfloxacin than the conventional methods. PRACTICAL APPLICATION: This novel paper-based microfluidic device can achieve the detection of antibiotic residues in agrifoods in a faster, cheaper, and more user-friendly manner.

Detection of antibiotic residues in pork using paper-based microfluidic device coupled with filtration and concentration.

This work demonstrates a sensitive and rapid method for the detection of antibiotic residues in food samples by employing the filtration behaviour of paper combined with aggregation and precipitation of chemical reagents. Using this concept, we successfully determined the presence of oxytetracycline and norfloxacin residues in pork using metal complexation on microfluidic paper-based analytical devices (µPADs). The base substrate (top layer of the device) was fabricated by printing letter channels of the words "oxytetracycline" and "norfloxacin" before functionalization with copper (II) sulfate pentahydrate in 0.5 M sodium hydroxide and iron (III) nitrate nanohydrate in 5 mM ammonia solution for the detection of oxytetracycline and norfloxacin separately. A transition metal hydroxide formed upon reaction that created solid precipitates on paper and allowed antibiotic residues to bind to the metal ions via coordination chemistry. The metal ion-antibiotic complex could form on the filter paper and generated a visible color change with the detection limit of 1 ppm for both oxytetracycline and norfloxacin in pork. This procedure of filtration and concentration in combination with a simple text-reporting approach allows the end users to achieve a low limit of detection as well as easy result interpretation in food safety monitoring.

Black Phosphorus and its Biomedical Applications.

Black phosphorus (BP), also known as phosphorene, has attracted recent scientific attention since its first successful exfoliation in 2014 owing to its unique structure and properties. In particular, its exceptional attributes, such as the excellent optical and mechanical properties, electrical conductivity and electron-transfer capacity, contribute to its increasing demand as an alternative to graphene-based materials in biomedical applications. Although the outlook of this material seems promising, its practical applications are still highly challenging. In this review article, we discuss the unique properties of BP, which make it a potential platform for biomedical applications compared to other 2D materials, including graphene, molybdenum disulphide (MoS2), tungsten diselenide (WSe2) and hexagonal boron nitride (h-BN). We then introduce various synthesis methods of BP and review its latest progress in biomedical applications, such as biosensing, drug delivery, photoacoustic imaging and cancer therapies (i.e., photothermal and photodynamic therapies). Lastly, the existing challenges and future perspective of BP in biomedical applications are briefly discussed.

Rapid detection of clenbuterol in milk using microfluidic paper-based ELISA.

In this study, a paper-based microfluidic enzyme-linked immunosorbent assay (ELISA) was developed as a screening system for rapid detection of clenbuterol, which is illegally used as a growth promoter for food-producing animals. The microfluidic paper-based analytical device (µPAD) was combined with ELISA and the intrinsic properties of paper allowed the entrapment of antibody through cellulosic fibres, validating to be an alternative to 96-well ELISA microplate for food safety monitoring. Detection of clenbuterol in milk was achieved by measuring the intensity of colour change that was proportional to the analyte concentration with a detection limit of 0.2 ppb. The µPAD effectively reduces the cost, volume of reagents, and time required to run ELISA for food sample testing.

Red blood cell transport mechanisms in polyester thread-based blood typing devices.

A recently developed blood typing diagnostic based on a polyester thread substrate has shown great promise for use in medical emergencies and in impoverished regions. The device is easy to use and transport, while also being inexpensive, accurate, and rapid. This study used a fluorescent confocal microscope to delve deeper into how red blood cells were behaving within the polyester thread-based diagnostic at the cellular level, and how plasma separation could be made to visibly occur on the thread, making it possible to identify blood type in a single step. Red blood cells were stained and the plasma phase dyed with fluorescent compounds to enable them to be visualised under the confocal microscope at high magnification. The mechanisms uncovered were in surprising contrast with those found for a similar, paper-based method. Red blood cell aggregates did not flow over each other within the thread substrate as expected, but suffered from a restriction to their flow which resulted in the chromatographic separation of the RBCs from the liquid phase of the blood. It is hoped that these results will lead to the optimisation of the method to enable more accurate and sensitive detection, increasing the range of blood systems that can be detected.

"Periodic-table-style" paper device for monitoring heavy metals in water.

If a paper-based analytical device (µ-PAD) could be made by printing indicators for detection of heavy metals in chemical symbols of the metals in a style of the periodic table of elements, it could be possible for such µ-PAD to report the presence and the safety level of heavy metal ions in water simultaneously and by text message. This device would be able to provide easy solutions to field-based monitoring of heavy metals in industrial wastewater discharges and in irrigating and drinking water. Text-reporting could promptly inform even nonprofessional users of the water quality. This work presents a proof of concept study of this idea. Cu(II), Ni(II), and Cr(VI) were chosen to demonstrate the feasibility, specificity, and reliability of paper-based text-reporting devices for monitoring heavy metals in water.

Understanding thread properties for red blood cell antigen assays: weak ABO blood typing.

"Thread-based microfluidics" research has so far focused on utilizing and manipulating the wicking properties of threads to form controllable microfluidic channels. In this study we aim to understand the separation properties of threads, which are important to their microfluidic detection applications for blood analysis. Confocal microscopy was utilized to investigate the effect of the microscale surface morphologies of fibers on the thread's separation efficiency of red blood cells. We demonstrated the remarkably different separation properties of threads made using silk and cotton fibers. Thread separation properties dominate the clarity of blood typing assays of the ABO groups and some of their weak subgroups (Ax and A3). The microfluidic thread-based analytical devices (µTADs) designed in this work were used to accurately type different blood samples, including 89 normal ABO and 6 weak A subgroups. By selecting thread with the right surface morphology, we were able to build µTADs capable of providing rapid and accurate typing of the weak blood groups with high clarity.