RESUMEN
This paper proposed a holographic optical element as a see-through screen for the computer-generated hologram projection system with 3D images. The proposed holographic screen consisted of a linear grating and a lens phase. The linear grating is used to redirect the information light and guide information into the observer's eye and achieve the see-through function. The lens phase is used to magnify the field of view of the holographic projection system. The aberration caused by the screen was analyzed in this paper and the aberration can be pre-corrected in the hologram calculation algorithm. Finally, the proposed system achieved 20.3 by 14.3 degrees field of view at 532â nm laser based on the spatial light modulator with 6.4â µm pixels.
RESUMEN
This paper proposes a binocular holographic floating display. The device consists of two phase-modulation spatial light modulators (SLM) and a dihedral corner reflector array (DCRA) element. The conjugate images of the SLMs generated by the DCRA become the system's exit pupils. Exit pupils that are larger than the pupils of human eyes are arranged to locate at the position of observer's eyes. Therefore, the dimension of the SLM will not limit the viewing angle, although the pixel pitch of the SLM still limits the maximum field of view. For the laser light source, the resolution of the images can achieve 3 arc minutes when the distance between images and DCRA is less than 20 cm. The full-color display function is also performed in the proposed device.
RESUMEN
An optical voice recorder capable of recording and reproducing propagating sound waves by using off-axis digital holography, as well as quantitative visualization, is presented. Propagating sound waves temporally modulate the phase distribution of an impinging light wave via refractive index changes. This temporally modulated phase distribution is recorded in the form of digital holograms by a high-speed image sensor. After inverse propagation using Fresnel diffraction of a series of the recorded holograms, the temporal phase profile of the reconstructed object wave at each three-dimensional position can be used to reproduce the original sound wave. Experimental results using a tuning fork vibrating at 440 Hz and a human voice are presented to show the feasibility of the proposed method.
RESUMEN
The recording properties of three-dimensional speckle-shift multiplexing in reflection-type holographic memory are analyzed numerically. Three-dimensional recording can increase the number of multiplexed holograms by suppressing the cross-talk noise from adjacent holograms by using depth-direction multiplexing rather than in-plane multiplexing. Numerical results indicate that the number of multiplexed holograms in three-layer recording can be increased by 1.44 times as large as that of a single-layer recording when an acceptable signal-to-noise ratio is set to be 2 when NA=0.43 and the thickness of the recording medium is 0.5 mm.
RESUMEN
Minimum optical energy required for four-step parallel phase-shifting digital holography (PPSDH) is evaluated numerically by using photon-counting analysis. PPSDH enables us to develop instantaneous three-dimensional (3D) measurement by single-shot measurement. In fast measurement of dynamic 3D events, detected optical power at an image sensor will be decreased. For biomedical sensing, maximum light intensity exists for preventing the damage of the tissue. In the numerical evaluation, a photon-counting approach is used for the evaluation of minimum detected energy by comparing the reconstructed images. Numerical results indicate that hundreds of photons at each pixel in the image sensor are enough for the reconstruction and total detected energy in a multiplexed hologram is about 1 pJ.
RESUMEN
Parallel phase-shifting digital holography using a phase-mode spatial light modulator (SLM) is proposed. The phase-mode SLM implements spatial distribution of phase retardation required in the parallel phase-shifting digital holography. This SLM can also compensate dynamically the phase distortion caused by optical elements such as beam splitters, lenses, and air fluctuation. Experimental demonstration using a static object is presented.
RESUMEN
We evaluate numerically the effect of shrinkage of photopolymer on the bit error rate or signal-to-noise ratio in a reflection-type holographic data storage system with angular multiplexing. In the evaluation, we use a simple model where the material is divided into layered structures and then the shrinkage rate is proportional to the intensity in each layer. We present the effectiveness of the proposed model from the experimental results in the recording of the plane waves both in a transmission-type hologram and a reflection-type one. Several kinds of shrinkage rates are used to evaluate the characteristics of angular multiplexing in the reflection-type holographic memory.
RESUMEN
Maximum storage capacity in a reflection-type holographic memory with three-dimensional speckle shift multiplexing is investigated numerically. An explicit expression of storage capacity is derived on the basis of interpage crosstalk noise. We fabricate a simulator to evaluate reflection-type holographic data storage by calculating wave propagation, recording a hologram, and reconstruction by scalar diffraction. We calculate the properties of the resultant diffraction efficiency, that is the noise, at the first null in the speckle-shift multiplexing. Numerical results indicate that the storage capacity is proportional to the numerical aperture to the fourth power and to the volume of the recording medium and is inversely proportional to the wavelength to the third power. Achievable storage capacity is discussed.
RESUMEN
Iterative data reconstruction in a thin photonic data storage medium using three-dimensional (3D) absorbers in a highly scattering medium is presented for secure data storage. 3D absorbers are used as data. A highly scattering medium protects data to measure 3D absorbers without knowledge of the scattering coefficient distribution because the phase information is lost during multiple scattering. This prevents an interferometer from measuring the volume medium. To recover the 3D absorbers, a 3D scattering coefficient distribution model is used as prior information and then an iterative method is applied to reduce the difference between the measured and numerical output intensity distributions. A preliminary numerical evaluation is presented.
RESUMEN
An optical system for authentication using a 3D (3D) random phase object with various wavelength readouts is proposed. The 3D phase object without surface modulation is secure when the scattering is strong enough because it prevents from the interferometric measurement. The identification is implemented by the correlation between a measured speckle pattern of the 3D phase object and stored speckle patterns. For accurate identification, two speckle patterns of the 3D object obtained by illuminating two wavelengths are used. Experimental demonstrations and numerical evaluations of wavelength selectivity are presented.
RESUMEN
We present a three-dimensional (3D) measurement and imaging based on a multicamera system. In the presented system, projected images of 3D objects are taken by cameras located at random positions on a circumference, and then the 3D objects can be reconstructed numerically. We introduce an angle correction function to improve the quality of the reconstructed object. The angle correction function can correct the angle error caused by the position errors in the projected images due to the finite pixel size of the image sensor. The numerical results show that the point source was reconstructed successfully by introducing the angle correction function. We also demonstrate experiments: the two objects are located on a rotary stage controlled by a computer, the projected images are taken by a single camera, and by using 33 projected images, the two objects are reconstructed successfully.
Asunto(s)
Algoritmos , Artefactos , Aumento de la Imagen/métodos , Interpretación de Imagen Asistida por Computador/métodos , Imagenología Tridimensional/métodos , Fotograbar/métodos , Simulación por Computador , Interpretación Estadística de Datos , Modelos Estadísticos , Fotograbar/instrumentación , Reproducibilidad de los Resultados , Sensibilidad y EspecificidadRESUMEN
We apply optical parallel processing to operations for multiplication modulo, which is one of the key components of a factorization algorithm. With this method, optical phase modulation provides the results of modulo operations. We construct a prototype system based on a Michelson interferometer with a photodetector array. Mirrors are set at both object and reference arms to generate interference fringes. A mirror in the object arm is tilted slightly, whereas the reference arm is set perpendicular to the optical axis. The tilt angle is determined by parameters for the target modulo operations. The presented system can achieve massive data processing in parallel with only simple implementation. We present our experimental results to verify the usefulness of our method.
RESUMEN
We propose a numerical method to obtain complex amplitude distribution of a three-dimensional (3D) object from a digital hologram. The method consists of two processes. The first process is to measure simultaneously a hologram of the 3D object and an object intensity distribution by two image sensors. These intensity distributions give us the amplitude and absolute value of phase of the 3D object at the image sensor plane. The second process is the determination of phase distribution by a proposed iterative process based on the criterion that the reconstructed 3D object is in focus and its conjugate reconstruction is out of focus. Numerical and experimental results show the effectiveness of the proposed method.
RESUMEN
Three-dimensional shift selectivity of a reflection-type hologram with speckle shift recording is investigated experimentally and numerically. We build an experimental setup consisting of lenses with numerical apertures of 0.28 and an iron-doped LiNbO(3) with a thickness of 0.5 mm. The experimental results show that three-dimensional selectivity has a size of 0.97 microm x 0.97 microm x 8.8 microm in diffraction efficiency. We also develop a volume holographic memory simulator to evaluate the experimental results. The simulator can quantitatively evaluate bit error rate, signal-to-noise ratio, and diffraction efficiency. Numerical results are in good agreement with the experimental results. The experimental and numerical results indicate that three-dimensional shift multiplexing can increase the storage capacity.
RESUMEN
A three-dimensional (3D) digital holographic display system with image processing is presented. By use of phase-shifting digital holography, we obtain the complex amplitude of a 3D object at a recording plane. Image processing techniques are introduced to improve the quality of the reconstructed 3D object or manipulate 3D objects for elimination and addition of information by modifying the complex amplitude. The results show that the information processing is effective in such manipulations of 3D objects. We also show a fast recording system of 3D objects based on phase-shifting digital holography for display with image processing. The acquisition of 3D object information at 500 Hz is demonstrated experimentally.
RESUMEN
A reflection-type holographic disk memory system with random phase shift multiplexing is proposed. The experimental results show that a binary data page of 18x17 bits is recorded successfully at intervals of 4 mum in a Fe:LiNbO3 crystal with a thickness of 0.5 mm when six data pages are superimposed. Numerical results show that random phase modulation can improve the shift selectivity in shift multiplexing recording as well as in data security. Experimental and numerical results show that reflection-type holographic disk memory has a high potential for terabyte storage capacity as in transmission-type memory.
RESUMEN
A method for reconstructing high-spatial-resolution images in an imaging system known as thin observation module by bound optics (TOMBO) is reported. We investigate a novel procedure combining a pixel-rearrangement method and iterative backprojection (IBP). Pixel rearrangement has been used until now in TOMBO, and IBP is a digital superresolution technique. We verify the effectiveness of the combined procedure with simulated and experimental results.