RESUMEN
Prostate cancer is the most common malignant tumor in the male reproductive system, and its incidence increases with age. Chemotherapy is one of the main strategies for treating prostate cancer, but it often comes with unavoidable side effects. Nanocarriers can improve drug utilization and targeting, and cationic carriers can also carry nucleic acids for gene therapy. In this study, we prepared a cationic micelle constructed from a polyprodrug that can deliver both chemotherapeutic drugs and nucleic acids simultaneously. The typical chemotherapeutic drug hydroxycamptothecin (HCPT) was linked by reactive oxygen species (ROS)-responsive coupling agents and forms amphiphilic block polymers with low molecular weight polyethyleneimine (PEI). The resulting cationic micelles can be triggered by high levels of ROS in tumor cells and collapse to release HCPT and suicide genes to kill tumor cells. At the same time, it reduces the killing of normal cells. In prostate cancer cells, it has been confirmed that the co-delivery carriers combined with chemotherapy and a suicide gene prodrug system have shown an ideal therapeutic effect on prostate cancer.
RESUMEN
OBJECTIVE: To provide an overview of the incidence of knee donor -site morbidity after autologous osteochondral mosaicplasty. METHODS: A comprehensive search was conducted in PubMed, EMbase, Wanfang Medical Network, and CNKI databases from January 2010 to April 20, 2021. Relevant literature was selected based on predefined inclusion and exclusion criteria, and data were evaluated and extracted. The correlation between the number and size of transplanted osteochondral columns and donor-site morbidity was analyzed. RESULTS: A total of 13 literatures were included, comprising a total of 661 patients. Statistical analysis revealed an incidence of knee donor-site morbidity at 8.6% (57/661), with knee pain being the most common complaint, accounting for 4.2%(28/661). There was no significant correlation between the number of osteochondral columns and postoperative donor-site incidence (P=0.424, N=10), nor between the diameter size of osteochondral columns and postoperative donor-site incidence(P=0.699, N=7). CONCLUSION: Autologous osteochondral mosaicplasty is associated with a considerable incidence of knee donor-site morbidity, with knee pain being the most frequent complaint. There is no apparent correlation between donor-site incidence and the number and size of transplanted osteochondral columns. Donors should be informed about the potential risks.
Asunto(s)
Cartílago Articular , Cartílago , Humanos , Incidencia , Cartílago/trasplante , Rodilla , Articulación de la Rodilla/cirugía , Dolor , Trasplante Autólogo , Trasplante ÓseoRESUMEN
Additive manufacturing (AM) that is currently being used to process micromixers has many issues regarding the structural integrity of the micromixers. To solve these issues, in this article, we propose a cross-sectional contour extraction algorithm based on computed tomography (CT) scan data to nondestructively detect the size deviation of micromixers generated by AM. Herein, we take a square wave micromixer and a three-dimensional (3D) circular micromixer as examples to characterize the size deviation. We reconstruct the surface model of the micromixer from CT scan data, which is referred to as the reconstructed model, and extract the central axis of the micromixer reconstructed model. Subsequently, a dividing plane perpendicular to the central axis is established, which is then used to cut the reconstructed model to obtain the cross-sectional contour of the channel. Finally, size inspection is conducted on the extracted cross-sectional contour. The standard deviations of the channel width and height for the square wave micromixer are 0.0271 and 0.0175, respectively, and those for the 3D circular micromixer are 0.0122 and 0.0144, respectively. Through uncertainty analysis, the errors calculated based on the design size are -1.70%, +0.48%, +0.23%, -1.86%, -5.23%, and -0.90%, respectively, which shows that this method can meet the needs of measurement.
RESUMEN
BACKGROUND: Femoral neck fractures are a common traumatic injury. The removal of the internal fixation remains controversial, especially in terms of mechanical stability. Moreover, collapsed necrosis of the femoral head continues to occur after fracture healing. We believe that sclerotic cancellous bone (SCB) formation around the screw is associated with femoral head necrosis. We aimed to compare mechanical features before and after implant removal and determine the effect of SCB formation on stress distribution. METHODS: Cylindrical cancellous bone sections were collected from a relatively normal region and an SCB region of a necrotic femoral head, and their elastic moduli were measured. Four femoral finite element models were developed: a) femoral neck fracture healing with implants, b) fracture healing without implants, c) sclerosis around the screw with implants, and d) sclerosis around the screw without implants. RESULTS: The maximum von Mises peak stresses of models a and b were 66.643 MPa and 63.76 MPa, respectively, and were concentrated in the upper lateral femur. The main stress was scattered at the lowest screw tail, femoral calcar region, and lateral femur shaft. Moreover, coronal plane strain throughout the screw paths near the femoral head in models a and b was mostly in the range of 1000-3000 µÎµ. The maximum stress concentrations in models c and d were located at the lower femoral head and reached 91.199 MPa and 78.019 MPa, respectively. CONCLUSIONS: The stresses in the sclerotic model around the cannulated screws are more concentrated on the femoral head than in the healing model without sclerotic bone. The overall stresses in the healing femoral neck fracture model were essentially unchanged before and after removal of the internal fixation.
Asunto(s)
Fracturas del Cuello Femoral , Humanos , Análisis de Elementos Finitos , Fracturas del Cuello Femoral/cirugía , Esclerosis , Tornillos Óseos , Fijación Interna de Fracturas/efectos adversos , Fémur/diagnóstico por imagen , Fémur/cirugía , Fenómenos BiomecánicosRESUMEN
OBJECTIVE: To systematically evaluate the clinical efficacy of arthroscopy and traditional incision in the treatment of tibial avulsion fracture of anterior cruciate ligament (ACL). METHODS: From July 2010 to July 2020, clinical comparative trial about arthroscopy and traditional incision in the treatment of ACL tibial avulsion fracture was conducted by using computer-based databases, including Embase, Pubmed, Central, Cinahl, PQDT, CNKI, Weipu, Wanfang, Cochrane Library, CBM. Literature screening and data extraction were carried out according to the inclusion and exclusion criteria, and the quality of the included literature was evaluated by improved Jadad score and Ottawa Newcastle scale (NOS). The operation time, hospital stay, fracture healing time, knee range of motion, postoperative excellent and good rate, complication rate, Lysholm score, International Knee Documentation Committee (IKDC) score and Tegner score were statistically analyzed by Review Manager 5.3 software. RESULTS: Finally, 16 literatures were included, including 1 randomized controlled trial and 15 non randomized controlled trials, with a total of 822 patients (405 in arthroscopy group and 417 in traditional incision group). Meta analysis showed that the operation time [MD=-9.03, 95% CI(-14.36, -3.70), P<0.001], hospital stay [MD=-5.81, 95%CI(-9.32, -2.31), P=0.001] and fracture healing time [MD=-14.61, 95% CI(-17.93, -11.28), P<0.001] in the arthroscopy group were better than those in the traditional incision group. The incidence of complications in arthroscopy group was lower than that in traditional incision group[OR=0.15, 95%CI(0.07, 0.33), P<0.001]. The postoperative excellent and good rate[OR=4.39, 95%CI (1.96, 9.82), P<0.001], knee mobility[MD=6.78, 95%CI(2.79, 10.77), P<0.001], Lysholm score[MD=11.63, 95%CI(4.91, 18.36), P<0.001], IKDC score[MD=7.83, 95%CI(6.09, 9.57), P<0.001] and Tegner score[MD=0.60, 95%CI(0.31, 0.89), P<0.001] in the arthroscopic group were higher than those in the traditional incision group. CONCLUSION: Compared with the traditional open reduction and internal fixation, arthroscopic surgery in patients with ACL tibial avulsion fracture can shorten the operation time, hospital stay and fracture healing time, reduce the incidence of postoperative complications, and obtain good postoperative knee function. It can be recommended as one of the first choice for patients with ACL tibial avulsion fracture.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Fracturas por Avulsión , Ligamento Cruzado Anterior/cirugía , Lesiones del Ligamento Cruzado Anterior/cirugía , Artroscopía , Fracturas por Avulsión/cirugía , Humanos , Ensayos Clínicos Controlados Aleatorios como Asunto , Técnicas de SuturaRESUMEN
Extramedullary plasmacytoma (EMP) is a rare plasma cell neoplasm, with the majority (80-90% of cases) occurring in the upper aerodigestive tract. To our best knowledge, primary EMP from renal tissues is extremely rare. Herein, the diagnosis and treatment of a refractory primary EMP with renal involvement in a 53-year-old male patient is reported. The patient received radical nephrectomy followed by radiotherapy, and showed relapse 3 months after treatment. The cancer cells were sensitive to subsequent chemotherapy, however, the patient died of infection associated with the disease after almost 3.5 years following first presentation.
Asunto(s)
Mieloma Múltiple , Plasmacitoma , Humanos , Riñón , Masculino , Persona de Mediana Edad , Recurrencia Local de Neoplasia , Nefrectomía , Plasmacitoma/diagnóstico por imagen , Plasmacitoma/cirugíaRESUMEN
Primary primitive neuroectodermal tumor (PNET) of the bladder is an extremely rare and highly aggressive neoplasm. We report a case of PNET of the urinary bladder associated with increased serum neuron-specific enolase (NSE) in the presence of relapse and metastasis. A 66-year-old male presented to our department due to painless gross hematuria. Computed tomographic urography (CTU) showed an intraluminal tumor in the anterior bladder wall. Biopsy revealed a malignant small round blue cell tumor. The patient denied radical cystectomy, and partial cystectomy was given together with resection of adjacent peritoneum. The patient was diagnosed with primary bladder PNET after pathological inspection with negative surgical margins. Additionally, he received 6 cycles of chemotherapy using etoposide and cisplatin (EP) regime, and showed recurrence and metastasis afterwards. Disease progression was seen after transurethral resection (TUR) of bladder tumor and radiotherapy. Pelvic and retroperitoneal metastasis triggered bilateral hydronephrosis, and then palliative treatment was given with bilateral percutaneous nephrostomy. Finally, he died 12 months after diagnosis. PNETs are highly aggressive tumors characterized by the expression of MIC2 and neural markers and the presence of EWS-FLI1 translocation. We recommend histologic, immunohistochemical, and cytogenetic analysis in all patients with small round blue cell bladder malignancy in order to rule out other small cell malignancies. Multimodal treatment, including surgery and adjuvant chemotherapy must be initiated. Patients aged ≤30 years underwent complete resection of tumor and standard chemotherapy showed a better prognosis, while those with metastasis, incomplete resection and inadequate response to chemotherapy showed poor prognosis. Moreover, an elevated NSE may indicate a poor prognosis.
RESUMEN
Additive manufactured polymers and metallized microstructures are widely used in the production of electronic components. However, such three-dimensional printed metallized electrical components inevitably have processing errors that affect their performance. It is vital to understand defects' effects on the performance of the final product. In this study, we simulated micro-computed tomography (CT) data. A spiral cavity is printed by stereolithography and spiral inductors with different numbers of turns are fabricated by injecting Gallium Indium liquid metal (EGaIn). Through the theoretical simulation of the spiral inductor and the characterization of the electrical performance, we found that the relative error in the simulation of 2.5-turn, 4.5-turn, and 6.5-turn spiral inductors is +30.6%, +13%, and +6%, respectively, compared with the experimental data. The CT data are obtained by a CT scanning microcoil and a reconstruction model with real structural features is established based on the data. The results show that the relative error between the reconstructed model with real defects and the experimental data is +10.4%, -3.7%, and -1.5%, respectively, which is closer to the experimental data. According to the CT data simulation that provides a more accurate theoretical prediction, the actual effect of a defect on the final product can be assessed. The difference between the experimental results and the theoretical simulation can be inferred from the reconstruction model.
RESUMEN
Iodine-promoted direct diamination of α,ß-unsaturated ketone to form two C-N bonds has been developed starting from chalcone and secondary amine. This reaction was performed in THF at 50 °C in the presence of I2 and K2 CO3. The protocol is metal-free, operationally simple and carried out under mild conditions, providing an effective new way for directing diamination reactions.
RESUMEN
In the current practice, to determine the safety factor of a slope with two-dimensional circular potential failure surface, one of the searching methods for the critical slip surface is Genetic Algorithm (GA), while the method to calculate the slope safety factor is Fellenius' slices method. However GA needs to be validated with more numeric tests, while Fellenius' slices method is just an approximate method like finite element method. This paper proposed a new method to determine the minimum slope safety factor which is the determination of slope safety factor with analytical solution and searching critical slip surface with Genetic-Traversal Random Method. The analytical solution is more accurate than Fellenius' slices method. The Genetic-Traversal Random Method uses random pick to utilize mutation. A computer automatic search program is developed for the Genetic-Traversal Random Method. After comparison with other methods like slope/w software, results indicate that the Genetic-Traversal Random Search Method can give very low safety factor which is about half of the other methods. However the obtained minimum safety factor with Genetic-Traversal Random Search Method is very close to the lower bound solutions of slope safety factor given by the Ansys software.
Asunto(s)
Algoritmos , Modelos Teóricos , Reconocimiento de Normas Patrones Automatizadas/métodos , Programas Informáticos , Reproducibilidad de los Resultados , Suelo , Propiedades de SuperficieRESUMEN
OBJECTIVES: To investigate the correlation of preoperative overactive bladder symptoms and urodynamic parameters to the improvement of overactive bladder symptoms after transurethral resection of the prostate. METHODS: A retrospective study was carried out in 128 patients with urodynamically proven benign prostatic obstruction that underwent transurethral resection of the prostate. All patients had preoperative urgency symptoms. The patients were divided into groups according to overactive bladder symptom severity and preoperative urodynamic parameters (presence and type of detrusor overactivity, degree of obstruction, bladder contractility). The 3-month postoperative changes in overactive bladder symptoms were then compared between the groups. RESULTS: Overall, there was a statistically significant improvement in mean overactive bladder symptoms score from 9.6 to 2.7 (P < 0.001). However, patients with preoperative mild overactive bladder symptoms had significantly lower postoperative overactive bladder symptoms scores than those with moderate or severe symptoms (P < 0.05). Patients with preoperative terminal detrusor overactivity had significantly higher overactive bladder symptoms scores compared with patients with phasic and no detrusor overactivity (P < 0.05), and were more likely to have persistent urge incontinence. Preoperative detrusor contractility and severity of obstruction did not affect postoperative overactive bladder symptom improvement. CONCLUSIONS: Most patients with benign prostatic obstruction and overactive bladder symptoms experience an improvement in their symptoms after transurethral resection of the prostate. The presence of preoperative terminal detrusor overactivity might be negatively associated with this improvement. The preoperative severity of overactive bladder symptoms, detrusor contractility and degree of bladder outlet obstruction do not appear to have an effect.