RESUMEN
Social network analysis can support quality improvement in care homes but traditional approaches to social network analysis are not always feasible in care homes. Recalling contacts and movements in a home is difficult for residents and staff and documentary and other sources of individual contacts can be unreliable. Bluetooth enabled wearable devices are a potential means of generating reliable, trustworthy, social network data in care home communities. In this paper, we explore the empirical, theoretical and real-world potential and difficulties in using Bluetooth enabled wearables with residents and staff in care homes for quality improvement. We demonstrate, for the first time, that a relatively simple system built around the Internet of Things, Bluetooth enabled wearables for residents and staff and passive location devices (the CONTACT intervention) can capture social networks and data in homes, enabling social network analysis, measures, statistics and visualisations. Unexpected variations in social network measures and patterns are surfaced, alongside "uncomfortable" information concerning staff time spent with residents. We show how technology might also help identify those most in need of social contact in a home. The possibilities of technology-enabled social network analysis must be balanced against the implementation-related challenges associated with introducing innovations in complex social systems such as care homes. Behavioural challenges notwithstanding, we argue that armed with social network information, care home staff could better tailor, plan and evaluate the effects of quality improvement with the sub-communities that make up a care home community.
Asunto(s)
Casas de Salud , Dispositivos Electrónicos Vestibles , Humanos , Análisis de Redes Sociales , Mejoramiento de la Calidad , Calidad de la Atención de SaludRESUMEN
AIMS: To monitor severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) RNA contamination in vehicles operating in England during the pandemic, to better understand transmission risk of SARS-CoV-2 on public transport. METHODS AND RESULTS: We collected 1314 surface samples between December 2020 and April 2022 on trains and buses managed by five different transport operators. The presence of SARS-CoV-2 RNA was investigated through reverse transcription polymerase chain reaction (RT-PCR). SARS-CoV-2 RNA was found on 197 (15%) of the 1314 surfaces sampled, including seat head rests, handholds, and air extract grilles, but the levels of RNA recovered on those samples (median value of 23.4, interquartile range: 14.3-35.4, N gene copies per extraction) made the presence of infectious virus at the time of sampling extremely unlikely. However, detection rates varied over time with peaks broadly coinciding with times of high community transmission, when it was more likely that people infected with SARS-CoV-2 were travelling on public transport. CONCLUSION: During the pandemic, and as in other public spaces, low levels of SARS-CoV-2 RNA were found on surfaces associated with public transport.
Asunto(s)
COVID-19 , ARN Viral , SARS-CoV-2 , COVID-19/transmisión , COVID-19/virología , COVID-19/epidemiología , SARS-CoV-2/genética , SARS-CoV-2/aislamiento & purificación , Inglaterra/epidemiología , ARN Viral/genética , ARN Viral/análisis , ARN Viral/aislamiento & purificación , Humanos , Estudios Longitudinales , Vehículos a Motor , TransportesRESUMEN
If some countries lead by example, standards may increasingly become normalized.
RESUMEN
The Wells-Riley model has been widely used to estimate airborne infection risk, typically from a deterministic point of view (i.e., focusing on the average number of infections) or in terms of a per capita probability of infection. Some of its main limitations relate to considering well-mixed air, steady-state concentration of pathogen in the air, a particular amount of time for the indoor interaction, and that all individuals are homogeneous and behave equally. Here, we revisit the Wells-Riley model, providing a mathematical formalism for its stochastic version, where the number of infected individuals follows a Binomial distribution. Then, we extend the Wells-Riley methodology to consider transient behaviours, randomness, and population heterogeneity. In particular, we provide analytical solutions for the number of infections and the per capita probability of infection when: (i) susceptible individuals remain in the room after the infector leaves, (ii) the duration of the indoor interaction is random/unknown, and (iii) infectors have heterogeneous quanta production rates (or the quanta production rate of the infector is random/unknown). We illustrate the applicability of our new formulations through two case studies: infection risk due to an infectious healthcare worker (HCW) visiting a patient, and exposure during lunch for uncertain meal times in different dining settings. Our results highlight that infection risk to a susceptible who remains in the space after the infector leaves can be nonnegligible, and highlight the importance of incorporating uncertainty in the duration of the indoor interaction and the infectivity of the infector when estimating risk.
Asunto(s)
Probabilidad , Humanos , Procesos Estocásticos , Medición de Riesgo/métodos , Modelos Teóricos , COVID-19/transmisión , Microbiología del Aire , SARS-CoV-2RESUMEN
BACKGROUND: Rapid and mass transmission of the SARS-CoV-2 virus amongst vulnerable people led to devastating effects from COVID-19 in care homes. The CONTACT intervention introduced Bluetooth Low Energy 'smart' wearable devices (BLE wearables) as a basis for automated contact tracing in, and feedback on infection risks and patterns to, care homes to try and improve infection prevention and control (IPC). We planned a cluster randomised controlled trial (RCT) of CONTACT. To be feasible, homes had to adopt CONTACT's technology and new ways of working. This paper reports on the process evaluation conducted alongside CONTACT's feasibility study and explains why it lacked the feasibility and acceptability for a definitive RCT. METHODS: This mixed method process evaluation used Normalisation Process Theory (NPT) qualitative (interviews, field notes, study case report forms and documents, and observation) and quantitative (survey instruments, counts of activity) data to plan, implement, and analyse the mechanisms, effects, and contextual factors that shaped the feasibility and acceptability of the CONTACT intervention. RESULTS: Thirteen themes within four core NPT constructs explained CONTACT's lack of feasibility. Coherence: the home's varied in the scale and extent of commitment and understanding of the technology and study procedures. Leadership credibility was important but compromised by competing priorities. Management and direct care staff saw CONTACT differently. Work to promote (cognitive participation) and enact (collective action) CONTACT was burdensome and failed to be prioritised over competing COVID-19-related demands on time and scarce human and cognitive resources. Ultimately, staff appraisal of the value of CONTACT-generated information and study procedures (reflexivity) was that any utility for IPC was insufficient to outweigh the perceived burden and complexity involved. CONCLUSIONS: Despite implementation failure, dismissing BLE wearables' potential for contact tracing is premature. In non-pandemic conditions, with more time, better co-design and integration of theory-driven implementation strategies tailored to care homes' unique contexts, researchers could enhance normalisation in readiness for future pandemic challenges. TRIAL REGISTRATION: ISRCTN registration: 11,204,126 registered 17/02/2021.
RESUMEN
COVID-19 has had a devastating impact worldwide, including in care homes where there have been substantial numbers of cases among a very vulnerable population. A key mechanism for managing exposure to the virus and targeting interventions is contact tracing. Unfortunately, environments such as care homes that were most catastrophically impacted by COVID-19 are also those least amenable to traditional contact tracing. A promising alternative to recall and smartphone-based contact tracing approaches is the use of discrete wearable devices that exploit Bluetooth Low Energy (BLE) and Long-Range Wide Area Network (LoRaWAN) technologies. However, the real-world performance of these devices in the context of contact tracing is uncertain. A series of experiments were conducted to evaluate the performance of a wearables system that is based on BLE and LoRaWAN technologies. In each experiment, the number of successful contacts was recorded and the physical distance between two contacts was compared to a calculated distance using the Received Signal Strength Indication (RSSI) to determine the precision, error rate, and duration of proximity. The overall average system contact detection success rate was measured as 75.5%; when wearables were used as per the manufacturer's guidelines the contact detection success rate increased to 81.5%, but when obstructed by everyday objects such as clothing or inside a bag the contact detection success rate was only 64.2%. The calculated distance using RSSI was close to the physical distance in the absence of obstacles. However, in the presence of typical obstacles found in care home settings, the reliability of detection decreased, and the calculated distance usually appeared far from the actual contact point. The results suggest that under real-world conditions there may be a large proportion of contacts that are underestimated or undetected.
Asunto(s)
COVID-19 , Dispositivos Electrónicos Vestibles , Humanos , Trazado de Contacto/métodos , Reproducibilidad de los Resultados , Ambiente en el Hogar , COVID-19/epidemiología , COVID-19/prevención & controlRESUMEN
This is an account that should be heard of an important struggle: the struggle of a large group of experts who came together at the beginning of the COVID-19 pandemic to warn the world about the risk of airborne transmission and the consequences of ignoring it. We alerted the World Health Organization about the potential significance of the airborne transmission of SARS-CoV-2 and the urgent need to control it, but our concerns were dismissed. Here we describe how this happened and the consequences. We hope that by reporting this story we can raise awareness of the importance of interdisciplinary collaboration and the need to be open to new evidence, and to prevent it from happening again. Acknowledgement of an issue, and the emergence of new evidence related to it, is the first necessary step towards finding effective mitigation solutions.
Asunto(s)
COVID-19 , Humanos , SARS-CoV-2 , Pandemias/prevención & control , Organización Mundial de la Salud , SociedadesRESUMEN
Computational fluid dynamics models have been developed to predict airborne exposure to the SARS-CoV-2 virus from a coughing person in a mechanically ventilated room. The models were run with three typical indoor air temperatures and relative humidities (RH). Quantile regression was used to indicate whether these have a statistically significant effect on the airborne exposure. Results suggest that evaporation is an important effect. Evaporation leads to respiratory particles, particularly those with initial diameters between 20 and 100 µm, remaining airborne for longer, traveling extended distances and carrying more viruses than expected from their final diameter. In a mechanically ventilated room, with all of the associated complex air movement and turbulence, increasing the RH may result in reduced airborne exposure. However, this effect may be so small that other factors, such as a small change in proximity to the infected person, could rapidly counter the effect. The effect of temperature on the exposure was more complex, with both positive and negative correlations. Therefore, within the range of conditions studied here, there is no clear guidance on how the temperature should be controlled to reduce exposure. The results highlight the importance of ventilation, face coverings and maintaining social distancing for reducing exposure.
Asunto(s)
Contaminación del Aire Interior , COVID-19 , Humanos , Humedad , Temperatura , SARS-CoV-2 , Contaminación del Aire Interior/análisis , Respiración ArtificialRESUMEN
Hospital-acquired infections (HAIs) are a global challenge incurring mortalities and high treatment costs. The environment plays an important role in transmission due to contaminated air and surfaces. This includes microorganisms' deposition from the air onto surfaces. Quantifying the deposition rate of microorganisms enables understanding surface contamination and can inform strategies to mitigate the infection risk. We developed and validated a novel Automated Multiplate Passive Air Sampling (AMPAS) device. This enables sequences of passive deposition samples to be collected over a controlled time period without human intervention. AMPAS was used with air sampling to measure the effect of ventilation rate and spatial location on the deposition rate of aerosolized Staphylococcus aureus in a 32 m3 chamber. Increasing the ventilation rate from 3 to 6 ACH results in a reduction of microbial load in the air and on surfaces by 45% ± 10% and 44% ± 32%, respectively. The deposition rate onto internal surfaces λd was calculated as 1.38 ± 0.48 h-1 . Samples of airborne and surface microorganisms taken closer to the ventilation supply showed a lower concentration than close to the extract. The findings support the importance of controlling the ventilation and the environmental parameters to mitigate both air and surface infection risks in the hospital environment.
Asunto(s)
Contaminación del Aire Interior , Infección Hospitalaria , Humanos , Contaminación del Aire Interior/análisis , Ventilación , Staphylococcus aureus , HospitalesRESUMEN
Surface to hand transfer of viruses represents a potential mechanism for human exposure. An experimental process for evaluating the touch transfer of aerosol-deposited material is described based on controlling surface, tribological, and soft matter components of the transfer process. A range of high-touch surfaces were evaluated. Under standardized touch parameters (15 N, 1 s), relative humidity (RH) of the atmosphere around the contact transfer event significantly influenced transfer of material to the finger-pad. At RH < 40%, transfer from all surfaces was <10%. Transfer efficiency increased markedly as RH increased, reaching a maximum of approximately 50%. The quantity of material transferred at specific RHs above 40% was also dependent on roughness of the surface material and the properties of the aerosol-deposited material. Smooth surfaces, such as melamine and stainless steel, generated higher transfer efficiencies compared to those with textured roughness, such as ABS pinseal and KYDEX® plastics. Pooled human saliva was transferred at a lower rate compared to artificial saliva, indicating the role of rheological properties. The artificial saliva data were modeled by non-linear regression and the impact of environmental humidity and temperature were evaluated within a Quantitative Microbial Risk Assessment model using SARS-CoV-2 as an example. This illustrated that the trade-off between transfer efficiency and virus survival may lead to the highest risks of fomite transmissions in indoor environments with higher humidity.
Asunto(s)
COVID-19 , Virus , Aerosoles , Humanos , Humedad , SARS-CoV-2 , Saliva , Saliva ArtificialRESUMEN
Many infectious diseases, including COVID-19, are transmitted by airborne pathogens. There is a need for effective environmental control measures which, ideally, are not reliant on human behaviour. One potential solution is Krypton Chloride (KrCl) excimer lamps (often referred to as Far-UVC), which can efficiently inactivate pathogens, such as coronaviruses and influenza, in air. Research demonstrates that when KrCl lamps are filtered to remove longer-wavelength ultraviolet emissions they do not induce acute reactions in the skin or eyes, nor delayed effects such as skin cancer. While there is laboratory evidence for Far-UVC efficacy, there is limited evidence in full-sized rooms. For the first time, we show that Far-UVC deployed in a room-sized chamber effectively inactivates aerosolised Staphylococcus aureus. At a room ventilation rate of 3 air-changes-per-hour (ACH), with 5 filtered-sources the steady-state pathogen load was reduced by 98.4% providing an additional 184 equivalent air changes (eACH). This reduction was achieved using Far-UVC irradiances consistent with current American Conference of Governmental Industrial Hygienists threshold limit values for skin for a continuous 8-h exposure. Our data indicate that Far-UVC is likely to be more effective against common airborne viruses, including SARS-CoV-2, than bacteria and should thus be an effective and "hands-off" technology to reduce airborne disease transmission. The findings provide room-scale data to support the design and development of effective Far-UVC systems.
Asunto(s)
COVID-19 , Infecciones Estafilocócicas , Desinfección , Humanos , SARS-CoV-2 , Rayos UltravioletaRESUMEN
We propose the Transmission of Virus in Carriages (TVC) model, a computational model which simulates the potential exposure to SARS-CoV-2 for passengers traveling in a subway rail system train. This model considers exposure through three different routes: fomites via contact with contaminated surfaces; close-range exposure, which accounts for aerosol and droplet transmission within 2 m of the infectious source; and airborne exposure via small aerosols which does not rely on being within 2 m distance from the infectious source. Simulations are based on typical subway parameters and the aim of the study is to consider the relative effect of environmental and behavioral factors including prevalence of the virus in the population, number of people traveling, ventilation rate, and mask wearing as well as the effect of model assumptions such as emission rates. Results simulate generally low exposures in most of the scenarios considered, especially under low virus prevalence. Social distancing through reduced loading and high mask-wearing adherence is predicted to have a noticeable effect on reducing exposure through all routes. The highest predicted doses happen through close-range exposure, while the fomite route cannot be neglected; exposure through both routes relies on infrequent events involving relatively few individuals. Simulated exposure through the airborne route is more homogeneous across passengers, but is generally lower due to the typically short duration of the trips, mask wearing, and the high ventilation rate within the carriage. The infection risk resulting from exposure is challenging to estimate as it will be influenced by factors such as virus variant and vaccination rates.
Asunto(s)
Contaminación del Aire Interior , COVID-19 , Vías Férreas , Aerosoles , Microbiología del Aire , COVID-19/transmisión , Fómites/virología , Humanos , SARS-CoV-2RESUMEN
The ability to model the dispersion of pathogens in exhaled breath is important for characterizing transmission of the SARS-CoV-2 virus and other respiratory pathogens. A Computational Fluid Dynamics (CFD) model of droplet and aerosol emission during exhalations has been developed and for the first time compared directly with experimental data for the dispersion of respiratory and oral bacteria from ten subjects coughing, speaking, and singing in a small unventilated room. The modeled exhalations consist of a warm, humid, gaseous carrier flow and droplets represented by a discrete Lagrangian particle phase which incorporates saliva composition. The simulations and experiments both showed greater deposition of bacteria within 1 m of the subject, and the potential for a substantial number of bacteria to remain airborne, with no clear difference in airborne concentration of small bioaerosols (<10 µm diameter) between 1 and 2 m. The agreement between the model and the experimental data for bacterial deposition directly in front of the subjects was encouraging given the uncertainties in model input parameters and the inherent variability within and between subjects. The ability to predict airborne microbial dispersion and deposition gives confidence in the ability to model the consequences of an exhalation and hence the airborne transmission of respiratory pathogens such as SARS-CoV-2.
Asunto(s)
Microbiología del Aire , Contaminación del Aire Interior , COVID-19 , Aerosoles y Gotitas Respiratorias/virología , COVID-19/transmisión , Tos , Humanos , SARS-CoV-2RESUMEN
Self-contamination during doffing of personal protective equipment (PPE) is a concern for healthcare workers (HCW) following SARS-CoV-2-positive patient care. Staff may subconsciously become contaminated through improper glove removal; so, quantifying this exposure is critical for safe working procedures. HCW surface contact sequences on a respiratory ward were modeled using a discrete-time Markov chain for: IV-drip care, blood pressure monitoring, and doctors' rounds. Accretion of viral RNA on gloves during care was modeled using a stochastic recurrence relation. In the simulation, the HCW then doffed PPE and contaminated themselves in a fraction of cases based on increasing caseload. A parametric study was conducted to analyze the effect of: (1a) increasing patient numbers on the ward, (1b) the proportion of COVID-19 cases, (2) the length of a shift, and (3) the probability of touching contaminated PPE. The driving factors for the exposure were surface contamination and the number of surface contacts. The results simulate generally low viral exposures in most of the scenarios considered including on 100% COVID-19 positive wards, although this is where the highest self-inoculated dose is likely to occur with median 0.0305 viruses (95% CI =0-0.6 viruses). Dose correlates highly with surface contamination showing that this can be a determining factor for the exposure. The infection risk resulting from the exposure is challenging to estimate, as it will be influenced by the factors such as virus variant and vaccination rates.
Asunto(s)
Contaminación del Aire Interior , COVID-19 , Fómites , Exposición Profesional , Equipo de Protección Personal , Fómites/virología , Guantes Protectores/virología , Hospitales , Humanos , Equipo de Protección Personal/virología , SARS-CoV-2RESUMEN
OBJECTIVES: To help people make decisions about the most effective mitigation measures against SARS-CoV-2 transmission in different scenarios, the likelihoods of transmission by different routes need to be quantified to some degree (however uncertain). These likelihoods need to be communicated in an appropriate way to illustrate the relative importance of different routes in different scenarios, the likely effectiveness of different mitigation measures along those routes, and the level of uncertainty in those estimates. In this study, a pragmatic expert elicitation was undertaken to supply the underlying quantitative values to produce such a communication tool. PARTICIPANTS: Twenty-seven individual experts from five countries and many scientific disciplines provided estimates. OUTCOME MEASURES: Estimates of transmission parameters, assessments of the quality of the evidence, references to relevant literature, rationales for their estimates and sources of uncertainty. RESULTS AND CONCLUSION: The participants' responses showed that there is still considerable disagreement among experts about the relative importance of different transmission pathways and the effectiveness of different mitigation measures due to a lack of empirical evidence. Despite these disagreements, when pooled, the majority views on each parameter formed an internally consistent set of estimates (for example, that transmission was more likely indoors than outdoors, and at closer range), which formed the basis of a visualisation to help individuals and organisations understand the factors that influence transmission and the potential benefits of different mitigation measures.
Asunto(s)
COVID-19 , SARS-CoV-2 , HumanosRESUMEN
The use of cloth face coverings and face masks has become widespread in light of the COVID-19 pandemic. This paper presents a method of using low cost wirelessly connected carbon dioxide (CO2) sensors to measure the effects of properly and improperly worn face masks on the concentration distribution of exhaled breath around the face. Four types of face masks are used in two indoor environment scenarios. CO2 as a proxy for exhaled breath is being measured with the Sensirion SCD30 CO2 sensor, and data are being transferred wirelessly to a base station. The exhaled CO2 is measured in four directions at various distances from the head of the subject, and interpolated to create spatial heat maps of CO2 concentration. Statistical analysis using the Friedman's analysis of variance (ANOVA) test is carried out to determine the validity of the null hypotheses (i.e., distribution of the CO2 is same) between different experiment conditions. Results suggest CO2 concentrations vary little with the type of mask used; however, improper use of the face mask results in statistically different CO2 spatial distribution of concentration. The use of low cost sensors with a visual interpolation tool could provide an effective method of demonstrating the importance of proper mask wearing to the public.