Changes in three-dimensional nasal morphology according to the direction of maxillary movement during Le Fort I osteotomy.

BACKGROUND: Le Fort I (LFI) osteotomy is commonly performed by orthognathic surgeons; however, postoperative changes in nasolabial morphology are of concern. Several factors influence such changes, but it is difficult to accurately predict the postoperative results. This study evaluated the three-dimensional (3D) morphological changes in the nasal region according to the different directions of maxillary movement during LFI osteotomy. MATERIALS AND METHODS: Forty-one patients who underwent LFI osteotomies were included. All patients were divided into maxilla-up (Group U: 20 patients) and maxilla-forward (Group F: 21 patients) groups. Soft tissue morphologies were determined preoperatively and 3 or 6 months postoperatively using an optical 3D scanner. All datasets were evaluated in terms of volume changes in nine subregions and changes in linear measurements around the nasal area. RESULTS: Both groups exhibited increased nasal volumes after surgery in the order of the three upper, three central, and three lower subregions. The change in volume of the central nasal region tended to be greater in Group U than that in Group F. CONCLUSION: We evaluated 3D morphological changes in the nasal region according to the direction of maxillary movement during LFI osteotomy. Group U exhibited a large change in the volume of the central nasal region.

Periosteal expansion osteogenesis using a tubular dynamic frame device: An experimental study in rats.

Periosteal expansion osteogenesis (PEO) is a technique for augmenting bone by creating a gradual separation between the bone and periosteum. This study assessed PEO-induced bone formation around the femurs of rats using a dynamic frame device (DFD), consisting of a shape memory membrane made of polyethylene terephthalate (PET) formed into a tubular shape. The DFDs, consisting of a PET membrane coated with hydroxyapatite (HA)/gelatin on the bone-contact surface, were inserted between the periosteum and bone of the femurs of rats. In the experimental group, DFDs were suture-fixed to the femur with 4-0 Vicryl Rapid; in the control group, 4-0 silk thread was used for fixation. Five rats per group were euthanized at intervals of 3, 5, and 8 weeks postoperatively. Bone formation was evaluated via micro-CT imaging, histomorphometry, and histological analysis. Morphological analysis revealed new bone between the femur and the periosteum, expanded by the DFD, in all groups. The mean values of new bone were 0.30 mm2 proximally, 0.18 mm2 centrally, and 0.82 mm2 distally in the control group, compared to 1.05 mm2 proximally, 0.27 mm2 centrally, and 0.84 mm2 distally in the experimental group. A significant difference in new bone was observed in the proximal region of the experimental group. Histological examination showed that a single layer of newly formed neoplastic bone was noted on the cortical bone surface across all sites. The proximal portion displayed a bone marrow cavity at the center, encircled by a thick bone cortex with a layered structure. New bone formation was notable between existing cortical bone and the periosteum, particularly at both ends of the DFD. The use of PET in PEO was a viable option for achieving ideal bone morphology.

Surgery-early approach combined with condylectomy for correction of severe facial asymmetry with mandibular condylar hyperplasia: a case report.

In patients with unilateral mandibular condyle hyperplasia, whether to perform condylectomy and orthognathic surgical procedures at the same time or orthognathic surgery in two stages for remains controversial. Reported here is a case of facial asymmetry with mandibular condyle hyperplasia, for which condylectomy and orthognathic surgery procedures were performed at the same time. A 28-year-old woman was presented to our department with chief complaints of left deviation of the mandible and right temporomandibular joint (TMJ) noise. Findings obtained in several imaging examinations led to a diagnosis of facial asymmetry associated with right mandibular condyle hyperplasia. Following 3 months of preoperative orthodontic treatment, in October 2018 under general anesthesia the patient underwent a right mandibular condylectomy, Le Fort I osteotomy, right mandibular sagittal split ramus osteotomy, and left mandibular inverted L ramus osteotomy. In examinations up to 3 years after surgery, good results were noted. For this case of severe facial asymmetry with mandibular condyle hyperplasia, early surgery and condylectomy were performed simultaneously to significantly shorten the total treatment time. The effectiveness of a surgery-early approach was confirmed by no postoperative findings indicating abnormalities in the TMJ or retroversion.

Temporomandibular joint ankylosis suspected to be associated with ankylosing spondylitis based on cervical computed tomography images: A pictorial essay.

This report showed a case of temporomandibular joint (TMJ) ankylosis suspected to be associated with ankylosing spondylitis based on the observation of bony ankylosis of the cervical spine on computed tomography (CT) images. A 53-year-old man presented with a chief complaint of difficulty in opening his mouth. His medical history indicated that in his 20s, he became aware of the difficulty in moving his neck. CT revealed marked osteoarthritic changes in the right mandibular condyle, suggesting fibrotic TMJ ankylosis. In addition, bony ankylosis of the cervical vertebral body and facet joints from the axis (C2) to C5 in continuity was observed. CT of the entire spine also showed bony deformity of the sacroiliac joints and bony ankylosis. Based on these findings, ankylosing spondylitis was suspected. The possibility of an ankylosing spondylitis complication should be considered in cases of TMJ ankylosis if bony ankylosis of the cervical spine is observed.

The Chimeric LFC and DCIA Flap in Combined Mandibular and Condylar Head and Neck Reconstruction-A Case Series.

Background: Defects of the ascending ramus of the mandible, including the condylar head and neck or the whole temporomandibular joint (TMJ), are difficult to reconstruct. Reconstruction is mainly based on the use of alloplastic joint prosthesis, costochondral grafting, distraction osteogenesis of the dorsal part of the mandibular ramus, or osseous microvascular flaps of various origin. With the objective of developing a method that overcomes the restrictions of these methods, we recently introduced a sequential chimeric flap consisting of a lateral femoral condyle flap (LFC) and deep circumflex iliac artery flap (DCIA) for reconstruction of up to half of the mandible and the condylar head and neck. Methods: The chimeric flap was used in four patients with the following diagnoses: therapy-refractory osteomyelitis, extended recurrent odontogenic keratozyst, Goldenhar syndrome, and adenocarcinoma of the parotid gland. After a diagnostic workup, LFC and DCIA flaps were harvested in all patients and used in a sequential chimeric design for the reconstruction of the mandibular body and condylar head and neck. Results: Follow-up from at least 24 months up to 70 month after surgery showed a successful reconstruction in all four patients. The LFC provided a cartilaginous joint surface, allowing for a satisfactory masticatory function with a stable occlusion and unrestricted mouth opening and preserved or regained lateral and medial excursions in all patients. The DCIA allowed for a bony reconstruction anatomically resembling a non-atrophied mandibular body. No flap-related complications were observed. Conclusions: The sequential chimeric LFC and DCIA flap is an appropriate method for reconstructing up to half of the mandible and the condylar head and neck. It is suitable in cases where alloplastic joint replacement cannot be used or where other methods have failed. Due to the necessity of harvesting two flaps, the burden of care is increased, and a careful indication is required. The technique is reserved for maxillofacial surgeons who have already gained significant experience in the field of microsurgery.

Static and dynamic guided bone regeneration using a shape-memory polyethylene terephthalate membrane: An experimental study in rabbit mandible.

BACKGROUND: Periosteal expansion (PEO) results in the formation of new bone in the space created between existing bone by expanding the periosteum. PEO has already been performed on rabbit parietal bone and effective new bone formation has been demonstrated. In this study, the utility of a polyethylene terephthalate (PET) membrane as an activator was evaluated in the more complex morphology of the mandible. METHODS: A PET membrane coated with hydroxyapatite (HA)/gelatine was placed in the rabbit mandibular bone at lower margin of mandibular molar region underneath periosteum, and screw-fixed. In the experimental group, the membrane was bent and screw-fixed along the lateral surface of the bone, with removal of the outer screw after 7 days followed by activation of the membrane. The experimental group was divided into two subgroups: with and without a waiting period for activation. Three animals were euthanized at 3 weeks and another three at 5 weeks postoperatively. Bone formation was assessed using micro-CT as well as histomorphometric and histological methods. RESULTS: No PET membrane-related complications were observed. The area of newly formed bone and the percentage of new bone in the space created by the stretched periosteum did not significantly differ between the control and experimental groups. However, in the experimental group a greater volume was present after 5 weeks than after 3 weeks. Histologically, bone formation occurred close to the site of cortical bone perforation, with many sinusoidal vessels extending through the perforations in the new bone into the overlying fibrous tissue. Inflammatory cells were not seen in the bone.

Distribution and anti-nociceptive function of endomorphin-1 in the rat cranial sensory ganglia.

Distribution of endomorphin-1 (EM-1) was immunohistochemically investigated in the rat cranial sensory ganglia. Small to medium-sized neurons in the trigeminal (TG), petrosal (PG), and jugular ganglia (JG) expressed EM-1-immunoreactivity. However, EM-1-immunoreactive (-ir) neurons were infrequent in the nodose ganglion. In the brainstem, EM-1-ir varicose fibers were detected in the superficial layer of the medullary dorsal horn and the caudal part of the nucleus tractus solitarius. By trichrome immunofluorescence analysis, approximately 70% of EM-1-ir neurons were also immunoreactive for transient receptor potential vanilloid 1 (TRPV1) in all the examined ganglia. Additionally, 56.8% of EM1-ir TG neurons and approximately 30% of EM-1-ir PG and JG neurons showed calcitonin gene-related peptide (CGRP)-immunoreactivity. By a retrograde tracing method, several TG, PG, and JG neurons innervating the facial and external ear canal skin expressed EM-1-immunoreactivity. However, EM-1-ir neurons innervating the tooth pulp, circumvallate papilla, and pharynx were relatively rare. Thus, EM-1 expression and its coexistence with TRPV1 and CGRP in the cranial sensory neurons may depend on their various peripheral targets. EM1-ir neurons probably project to the superficial layer of the medullary dorsal horn and caudal part of the nucleus tractus solitarius. EM-1 may be involved in nociceptive transmission from the skin.

Comparison of three-dimensional soft tissue changes according to the split pattern after sagittal split osteotomy in patients with skeletal class III malocclusion.

OBJECTIVES: This study aimed to analyse the changes in soft tissue and hard tissue stability associated with the split pattern, i.e. long split (LS) or short split (SS), after sagittal split osteotomy. MATERIALS AND METHODS: Patients who underwent sagittal split ramus osteotomy were classified into LS or SS groups according to postoperative computed tomography images. They were examined via lateral cephalography and three-dimensional (3D) optical scanning before surgery (T0) and 1 (T1), 3 (T2), and 12 (T3) months after surgery. Six standard angles (SNA, SNB, ANB, FMA, FMIA, and IMPA) were used as measures of hard tissue change. The two sets of 3D data were superimposed, and the volumetric differences were calculated as the soft tissue change. The areas evaluated were delimited by 10 × 20-mm rectangles in the frontal aspect and a 25 × 25-mm square in the lateral aspect. RESULTS: A total of 42 sides (26 patients) were analysed, including 20 (16 patients) in the SS group and 22 (16 patients) in the LS group. We found no significant differences in cephalographic angle or soft tissue changes in the frontal aspect between the SS and LS groups. We found significant differences in the subauricular region from T0-T1 (p = 0.02), T0-T2 (p = 0.03), and T0-T3 (p = 0.037) in terms of soft tissue changes in the lateral aspect. The volume increase associated with posterior mandibular movement was greater in the LS group. CONCLUSIONS: We found that LS patients with mandibular prognathism exhibited increased subauricular volumes following mandibular setback. CLINICAL RELEVANCE: It is essential to predict the postoperative facial profile before surgery. The split pattern after sagittal split osteotomy affects the postoperative profile of patients with mandibular prognathism.

Condylar Resorption Following Compressive Mechanical Stress in Rabbit Model - Association of Matrix Metalloproteinases.

BACKGROUND/AIM: Idiopathic condylar resorption (ICR) is a morphological change of the condylar head that occurs following orthodontic treatment or orthognathic surgery. This complication is serious, as it can cause relapse after mandible treatment. The aim of this experimental study was to evaluate the mechanism of influence of condylar resorption on compressive mechanical stress in temporomandibular joint following a change in occlusal position by mandible advancement. MATERIALS AND METHODS: An osteotomy procedure at the midline of mandible was performed in 15 rabbits, with the left side moved forward by 3.5 mm. Advancement of the left side of the mandible resulted in compressive mechanical stress on condylar head on the left side. Samples were subjected to micro-computed tomography, histological staining and immunohistochemistry. RESULTS: The area and depth of anterior condylar resorption at two weeks were significantly different as compared to those at one week (p<0.05). TRAP staining confirmed the significantly largest number of TRAP-positive cells after two weeks (p=0.02), compared to one week. MMP-3 and MMP-13 immunostaining of the anterior condylar head at two weeks revealed high levels of both proteins from the surface to the deep layer of cartilage. CONCLUSION: Compressive mechanical stress following mandible advancement results in load on the anterior surface of the condylar head, which leads to bone resorption there, and induces MMP-3 and MMP-13 related to degradation of condylar head cartilage.

Radiologic Risk Factors for Persistent Mandibular Nerve Neurosensory Disturbance Following Sagittal Split Osteotomy.

PURPOSE: Neurosensory disturbance (NSD) occurring in the lower lips and chin is a major postoperative complication related to bilateral sagittal split osteotomy (SSO). The purpose of this study is to identify preoperative radiographic findings following SSO procedure associated with persistent NSD. METHODS: This retrospective cohort study analyzed data for consecutive patients who underwent SSO. Primary predictor variables, including ramus width, mandibular body height, mandibular angle length, gonial angle, distance from mental foramen to distal aspect of mandibular second molar (MFD), and measurement of bone marrow space (BMS), were examined in a series of radiographic images. The primary outcome variable was NSD. Patients with NSD were divided into 2 groups based on findings obtained 1 year postoperatively: persistent, for those with NSD remaining after 1 year, and transient, when NSD occurred for less than 1 year. Covariates included sex and age. Comparisons were analyzed by use of Mann-Whitney U test or χ2 test. Multivariate analysis was performed using step-wise logistic regression to determine significant factors related to persistent NSD. A P value .005 or less was considered statistically significant. RESULTS: Of the 349 sides investigated, the persistent NSD group consisted of 59 sides (16.9%), while the transient NSD group consisted of 290 sides (83.1%). The occurrence of persistent NSD was correlated with age (P < .05), MFD (P < .001), mandibular body height (P < .05), and BMS (P < .001). Multivariate logistic analysis also showed a significant association of MFD (P < .001) and BMS (P < .001). CONCLUSIONS: Preoperative MFD and BMS are radiographic findings that are associated with an increased risk for persistent NSD following SSO procedure.

A collagen membrane for periosteal expansion osteogenesis using a timed-release system in rabbit calvaria.

BACKGROUND: The purpose of this study was to evaluate the effects of resorbable membranes, combined with a shape memory alloy (SMA) mesh device, on bone formation using a timed-release system for periosteal expansion osteogenesis (TIME-PEO). MATERIALS AND METHODS: Twelve Japanese white rabbits were used in this study. An SMA device was inserted under the forehead periosteum, pushed and bent for attachment to the bone surface, and then fixed using resorbable thread. The rabbits were divided into four groups: C1 (5 weeks postoperatively without membrane), C2 (8 weeks postoperatively without membrane), E1 (5 weeks postoperatively with membrane), and E2 (8 weeks postoperatively with membrane). The rabbits were killed 5 or 8 weeks after the operation and the newly formed bone was assessed histologically and radiographically. RESULTS: SMA devices, concealed under soft tissue until the time of euthanasia, did not cause active inflammation. The mean activation height, from the original bone surface to the midpoint of the mesh, was 3.1 ± 0.6 mm. Newly formed bone was observed, and most of the subperiosteal space underneath the device was occupied by fibrous tissue. Immature bone was present at the outer surface of the original skull bone in all groups. On histomorphometric analysis, there was no significant difference in the volume of the new bone between C1 and E1 (p = 0.885), and C2 and E2 (p = 0.545). CONCLUSIONS: PEO using an SMA mesh device, which is based on guided bone regeneration (in atrophic alveolar bone), shows promise as an alternative for bone augmentation, irrespective of whether a resorbable membrane is used.

Clinical course of masticatory function recovery following arthrocentesis in patients with unilateral mandibular condyle head fracture.

The aim of this study was to investigate the clinical course of masticatory function recovery following arthrocentesis. Patients with a unilateral condylar head fracture who underwent arthrocentesis for therapeutic reasons were evaluated and compared with patients with a unilateral condylar head fracture who did not undergo arthrocentesis. At 3 months after treatment, the occlusal contact area and maximum bite force in patients with a fracture treated with arthrocentesis were greater than in those who did not receive arthrocentesis at the same time points, although the differences were not significant. Moreover, at 1 and 3 months following arthrocentesis, mean (±SD) occlusal contact area (1 month: 1.99 ± 0.55 mm2, p = 0.01; 3 months: 2.90 ± 1.36 mm2, p = 0.03) and maximum bite force (1 month: 82.45 ± 15.04 N, p = 0.01; 3 months: 101.11 ± 14.53 N, p = 0.01) on the fractured side in patients who underwent that treatment were significantly reduced when compared with those on the non-fractured side. The authors conclude that if the priority is to avoid open reduction and internal fixation, then the arthrocentesis approach might be a less invasive alternative, albeit with the price of a prolonged healing interval.

A comparison of postoperative, three-dimensional soft tissue changes in patients with skeletal class III malocclusions treated via orthodontics-first and surgery-first approaches.

The aim of this retrospective study was to compare three-dimensional (3D) soft tissue and hard tissue changes between orthodontics-first approach (OFA) and surgery-first approach (SFA) after mandibular setback surgery. All patients underwent bilateral sagittal split osteotomy, and were examined by lateral cephalograms and 3D optical scanner before surgery (T0) and 1 (T1), 3 (T2), and 12 (T3) months after surgery. Three standard angles (FMA, U1 to FH, IMPA) were measured as hard tissue change and the 2 sets of 3D data were superimposed, and volumetric differences were calculated as soft tissue change. Statistical analyses were performed by using unpaired t-tests. Differences with P < 0.05 were considered significant. A total of 39 patients with mandibular prognathism were included in this study. The OFA group consisted of 24 patients and the SFA group of 15 patients. The SFA group exhibited more labial inclination from T1 to T2 (p = 0.008) and T2 to T3 (p = 0.003) than did the OFA group. There were no significant changes at maxilla and mandible at each term of T0, T1, T2 and T3 (p > 0.05), but compared to before surgery, mandibular volume in SFA group significant increased at 1year (p = 0.049) after surgery. We found that the soft tissue changes after the SFA differed significantly from those after the OFA; thus, soft tissue predictions require more care. An analysis of our data compared with OFA and SFA for the patient with mandibular prognathism confirm that the mandibular soft tissue changes by postoperative orthodontic treatment and occlusal relationship in SFA.

Wound healing effect of autologous fibrin glue and polyglycolic acid sheets in a rat back skin defect model.

Fibrin glue from autologous plasma may prevent viral infection and allergic reaction. Moreover, this biomaterial contains growth factors such as TGF-ß and VEGF that promote reconstruction of the mucous membrane by stimulating fibroblast proliferation and angiogenesis. Thus, autologous fibrin glue is predicted to improve healing better than commercial fibrin glue. Here, we evaluated the effects of autologous fibrin glue on the crucial early phase of wound healing. Epithelial defects were introduced in rats and covered with polyglycolic acid (PGA) sheets with or without commercial or autologous fibrin glue. Wound healing was assessed for six weeks by histology and immunohistochemistry. Our results demonstrate that wounds covered with PGA sheets and autologous fibrin glue achieved efficient wound healing without complications such as local infection or incomplete healing. The rate of recovery of the regenerating epithelium in this group was superior to that in wounds covered with PGA sheets and commercial fibrin glue. Immunohistochemistry of laminin, cytokeratin, and VEGF confirmed fine and rapid epithelial neogenesis. Collectively, our results indicate that covering surgical wounds with autologous fibrin glue promotes wound healing and epithelialization, improves safety, and reduces the risks of viral infection and allergic reaction associated with conventional techniques.

Periosteal expansion osteogenesis using an innovative, shape-memory polyethylene terephthalate membrane: An experimental study in rabbits.

Periosteal expansion osteogenesis (PEO) results in the formation of new bone in the gap between periosteum and original bone. The purpose of this study is to evaluate the use of a polyethylene terephthalate (PET) membrane as an activation device. A dome-shaped PET membrane coated with hydroxyapatite/gelatin on the inner side was inserted between the elevated periosteum and bone at the rabbit calvaria. In the experimental group, the membrane was pushed, bent, and attached to the bone surface and fixed with a titanium screw. In control group, the membrane was only inserted and fixed with titanium screw at original shape under the periosteum. After 7 days, the screw was removed and the mesh was activated in the experimental group. Three animals per group with or without setting a latency period for activation were sacrificed at 3 and 5 weeks after surgery. Bone formation was evaluated via micro-computed tomography and determined by histomorphometric methods and histological evaluation. No PET membrane-associated complications were observed during this study. The quantitative data by the area and the occupation of newly formed bone indicated that the experimental group had a higher volume of new bone than the control group at 3 weeks after surgery. Histologically, bone formation progressed to areas adjacent to the cortical perforations; many sinusoidal vessels ran from the perforations to overlying fibrous tissue via the new bone. No bone or obvious inflammatory cells were observed over the membrane. The PET membrane has biocompatible device for PEO that induces a natural osteogenic response at the gap between the original bone and periosteum.

Mandible fractures and dental injuries related to road traffic accidents over a 12-year period-Retrospective multicentre study.

BACKGROUND/AIM: Road traffic accidents (RTAs) are a common cause of maxillofacial injuries. The aim of this retrospective multicentre study was to investigate the characteristics of maxillofacial fractures and dental injuries that occurred in RTAs in Miyagi, Japan. MATERIALS AND METHODS: The records of 404 patients with maxillofacial injuries treated at the Oral and Maxillofacial Surgery Departments of four different institutions over a period of 12 years were analysed. Ninety-nine of these patients had suffered these injuries in an RTA. RTA-related cases were divided according to age, gender, presentation month, presentation day of the week, transportation mode, time of accident, fracture sites and fracture mechanism. RESULTS: There were 72 males and 27 females who suffered injuries as the result of an RTA, for a male-to-female ratio of 2.7:1.0, with a mean age of 35.3 years (range, 1-86 years old). Most of the accidents occurred in June and on a Wednesday, and most of the affected patients were riding a bicycle at the time. The number of patients with maxillofacial injuries related to bicycle riding showed an increasing trend in recent years. Mandible fractures were the most prevalent, followed by dental injuries and maxilla fractures. In cases with a single fracture of the mandible, the symphysis was the most frequent site, while in those with multiple fractures, the association of symphysis and bi-lateral condyle fractures was the greatest. For bicycle-related accidents, a single fracture in the mandible occurred more often than multiple fractures. CONCLUSIONS: The number of RTA-related injuries while bicycle riding showed an increasing trend with mandible fractures commonly seen in those cases. Efforts to reduce maxillofacial injuries related to bicycle accidents are needed.

The relationship between neurosensory disturbance of the inferior alveolar nerve and the lingual split pattern after sagittal split osteotomy.

OBJECTIVE: The aim of this study was to evaluate the relationship between neurosensory disturbance (NSD) and the different types of bilateral sagittal split osteotomy (BSSO) lingual fracture created. STUDY DESIGN: The study group consisted of 45 patients with mandibular deformities (90 sides; 14 males and 31 females). Computed tomography (CT) scans were obtained preoperatively and 1 week postoperatively. All patients were divided into lingual fracture line groups on the basis of their postoperative scans. NSD was tested preoperatively and 1, 3, and 12 months postoperatively by using a sensory touch Semmes-Weinstein (SW) test and the 2-point discrimination (TPD) test. RESULTS: Patients were divided into 2 groups on the basis of their lingual fracture lines after mandibular BSSO; among the 45 patients, 39 sides (43.3%) had short-splits, and 51 sides (56.7%) had long-splits. The short-split group was less affected at all tested times, and the difference between the 2 groups was significant 1 month postoperatively on TPD test but not at other times on the both tests. CONCLUSIONS: The split type did not affect the NSD incidence at 3 and 12 months postoperatively.

Influence of oestrogen deficiency and excessive mechanical stress on condylar head of mandible.

OBJECTIVE: We assessed the aetiology of idiopathic condylar resorption by examining the effects of oestrogen and compressive mechanical stress under a low systemic oestrogen condition in temporomandibular joints (TMJ) caused by an ovariectomy. MATERIALS AND METHODS: Female rabbits were divided into non-ovariectomy (non-OVX) and ovariectomy (OVX) groups. A cortical osteotomy was performed with a custom device that was increased in length by 0.25 mm every 12 hr for 1 week after the operation, during which the TMJs in the rabbits received compressive mechanical stress. Samples from both groups were examined with micro-computed tomography and histological staining. RESULTS: Area and depth of bone resorption were both greater in the OVX group. Furthermore, a significantly earlier and greater prevalence of sub-condylar bone resorption was noted in that group, while cells positive for tartrate-resistant acid phosphatase were increased in the OVX group. CONCLUSIONS: The present findings suggest that oestrogen induced a much greater amount of bone resorption on the anterior surface of the condylar head at an earlier stage in the TMJs of the present model rabbits. Thereafter, restoration of TMJ function appeared to occur in a normal manner.

The Accuracy of Maxillary Position Using a Computer-Aided Design/Computer-Aided Manufacturing Intermediate Splint Derived Via Surgical Simulation in Bimaxillary Orthognathic Surgery.

PURPOSE: The purpose of this study was to assess the clinical interventions and the accuracy of maxillary reposition using a computer-aided design/computer-aided manufacturing (CAD/CAM) splint derived via surgical simulation. MATERIALS AND METHODS: The retrospective study comprised 24 patients who underwent bimaxillary surgery. The patients were assigned to 1 of 2 groups by a way of maxillary repositioning. One group received conventional intermediate wafers and the other CAD/CAM wafers during Le Fort I osteotomy. We recorded operation time, blood loss, the operative accuracy. Accuracy was analyzed by 3-dimensional computed tomography images before and immediately after the operation. The evaluation points were the right maxillary first incisor (U1), the right maxillary second molar (M2-right), and the left maxillary second molar (M2-left). RESULTS: The 2 groups did not differ significantly in operation time and blood losses. The vertical axis of U1 data differed significantly between the 2 groups (P = 0.008). None of the horizontal, vertical, or anteroposterior axis of M2-right data differed significantly, and anteroposterior axis of M2-left data differed significantly (P = 0.0296). The CAD/CAM group 3-dimensional distance errors were less than those of the conventional group for all points. CONCLUSION: Placement of CAD/CAM splint allowed highly accurate repositioning; the accuracy exceeded that afforded by conventional model surgery using a facebow and articulator.

Pyramidal and posterior osseous release for maxillary superior/posterior mobilization using an ultrasonic bone-cutting device after Le Fort I osteotomy.

AIM: The purpose of this study was to evaluate the efficiency of pyramidal and posterior osseous release (PPOR) for maxillary impaction using an ultrasonic bone-cutting device after Le Fort I (LFI) osteotomy. MATERIALS AND METHODS: In total, 31 Japanese adults with jaw deformities, diagnosed as having maxillary excess with mandibular prognathism or deficiency, underwent LFI osteotomy and bilateral sagittal split osteotomy. The patients were divided into two groups: a trimming group (15 patients, four men and 11 women; mean age 24.8 years) and a PPOR group (16 patients, seven men and nine women; mean age 22.8 years). In the trimming group, osseous interference around the descending palatine artery (DPA) was removed using forceps, rounding bur, and reciprocating rasp. The PPOR technique was used to remove osseous fragments created by V-shaped osteotomy around the DPA following vertical osteotomy behind the DPA using an ultrasonic bone-cutting device (Variosurg 3; NSK, Tochigi, Japan). The operative times for maxillary osteotomy, total operative times (including bilateral sagittal split osteotomy), and total blood loss were assessed. RESULTS: The mean planned amounts of maxillary impaction were 4.37 ± 1.27 mm in the trimming group and 4.38 ± 1.36 mm in the PPOR group (p = 0.98). The mean maxillary operative time for the PPOR group was significantly shorter, by 25.5% (p < 0.001). Total operative time for the PPOR group was also significantly shorter, by 24.3% (p < 0.001). Mean blood loss was significantly lower in the PPOR group than in the trimming group (p = 0.003). CONCLUSION: The PPOR technique for maxillary impaction after LFI osteotomy shortened the operative time and enabled secure reduction of the maxilla in patients who required the treatment of maxillary impaction with preservation of the DPA bundle.